Fácies e associação de fácies da formação Pirambóia na região de Descalvado/SP

The Pirambóia Formation is a lithostratigraphic unit of the Paraná Basin, positioned between the Corumbataí (lower) and Botucatu (upper) Formations on the eastern edge of the basin. This unit is focused by many studies due to its great importance as an essential component in the Guarani Aquifer System (SAG) and the petroleum system “Irati-Pirambóia”, as excellent reservoirs. The Pirambóia Formation is historically the subject of several controversies on issues like age, contact relationships with the upper unit and depositional paleoenvironment. Despite these aspects, the Pirambóia Formation is commonly taken to be of Triassic age and is considered a product of wet aeolian systems, with plenty of wet interdunes and subordinate fluvial facies. In this work, by using techniques such as facies analysis, depositional architecture and facies association, facies of this unit were characterized and their depositional paleoenvironment was inferred particularly in Jundu Mining, region of Descalvado in northeastern São Paulo. Techniques such as grain size and petrographic analyses, aimed to characterize this unit as a potential reservoir rock. Five facies were described for the Pirambóia Formation in the studied region: St, Sh, Sm, Sr and Gt facies, generated by sedimentary processes of the bottom load type, mostly under low flow regime (with exception for the Sh facies, which is formed by upper flow regime processes). In addition to that, four facies associations were recognized from the architectural elements, primarily contained within the main channel: complex channel bars, composed by foreset macroforms (FM), sandy bedforms (SB) and gravel bars and bedforms (GB); flood deposits, constituted by laminated sand sheets (LS); deposits of hyperconcentrated flows and eolian deposits. It was interpreted that the Pirambóia Formation in Descalvado (SP) is the record of the sedimentation of braided rivers, with dunes and interdunes deposits...

Incorporação do lodo da estação de tratamento de água (ETA II) do município de Rio Claro-SP, na argila, para produção de cerâmica vermelha

The slugde from decanters in Water Treatment Plants (WTP) has different composition varying, according to the region, coagulant type and dosages, the plant layout. In this work, the physical characterization of the sludge generated from decenties (ETAII the municipality of Rio Claro, Brazil), the manufacture of bodies of evidence-sludge mixture of clay (with humidity of 8% and concentrations of sludge, 5, 15 and 30%) the testing technology after burning the mixture to a temperature of 950 ° C were investigated. The main aim assess the possibility of its use as raw material in the ceramic red production. For comparison of the obtained results it was used values of the testing technology of bodies of evidence only with clay, prepared under the same conditions. In general, the addition of sludge from ETA made worse the properties of the ceramic body, however, the values obtained from the tests on the concentration of 5% of sludge, still remain within the acceptable limits for the production of red pottery pieces.

Identificação de áreas de risco na região urbana do município de Guaratinguetá, SP, quanto à ocorrência de inundações e processos erosivos

The city of Guaratinguetá, SP, presents in its history, several instances of property damage and human losses, conditional on the event of flooding and mass movement of soil, resulting from the development of erosion processes. The extent and severity of these events that affect humans and their properties is the result of the illegal occupation of these areas as potential geohazard. Thus, it is of great importance to physical characterization and identification of such areas within the map of the same city as a way to minimize the effects and mitigate the consequences of these events. Thus, this graduate report presents a series of field campaigns, geotechnical laboratory testing, consultation with maps and satellite images, representative of the physical environment, and the city plan as a means conclusive for the delimitation of risk areas with potential for occurrence of erosion and / or flooding on the map representing the urban area of Guaratinguetá, SP. Also featured are the descriptions of the main characteristics of those areas identified as being at risk, along with proposals to avoid or minimize the impact of problems related to flooding and erosion processes on the local population

Análise do desempenho físico-mecânico de painéis compensados de Pinus sp. produzidos com adesivos aquosos a base de poliacetato de vinila e de homopolímero vinílico

This study aimed to evaluate the physico-mechanical performance of three PVA adhesive formulations according to the Brazilian standards for plywood testing and to evaluate the results with those presented in the technical literature and specified in normative documents. The study presents the production process of the panels, the obtaining of samples and, finally, the implementation of physico-mechanical characterization tests based on plywood Brazilian standards. For the panels production it was used a gramature of 120 g / m² and applied a pressure of 15 bars and two temperature combinations and pressing time for each adhesive. The commercial adhesives used were PVA 1810, PVA 1060 and Vinyltec 239. The physical tests conducted were thickness swelling, density, moisture content and water absorption. The mechanical tests were static flexion, for the determination of elasticity modulus (MOE) and rupture modulus (MOR), and shear in the glue line. Among the three formulations studied none showed good performance in the presence of water. However, other trials in the adhesive showed better results and closer to the commercially equivalent used, in the case the urea-formaldehyde, was the PVA 1810, that can be applied in non-structural uses and in environments without the presence of moisture

Associação da ocorrência de formigas (Hymenoptera: Formicidae) com atributos do solo e da vegetação em um domínio do cerrado à nordeste do estado do maranhão, Brasil

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Oxidação de carboidratos via catálise metálica não enzimática para aplicação em sensores

This work has main aim of is to propose the synthesis and characterization of nanostructured materials for oxidation of carbohydrates such as glucose, with non-enzymatic catalysis. The proposed pathway of synthesis of metal catalysts is the polyol method and techniques of physical characterization proposals for analysis of prepared catalyst pass through diffraction technique of ray-x (DRX), scanning electron microscopy (SEM) and Energy Dispersive Spectroscopy ray-x (EDX). Technical proposals for the electrochemical characterization of the synthesized catalysts are Cyclic voltammetry (CV) and differential pulse voltammetry (DPV). The prospects of this work are compared by the catalytic activity of the sensor designed with non-enzymatic sensors and biosensors also known in the literature

Eletro-oxidação de metanol e etanol sobre catalisadores suportados de 'PD''AU'

Pós-graduação em Química - IQ

Fracionamento geoquímico de metais em sedimentos e avaliação da qualidade da água do Rio Bento Gomes, Pantanal de Poconé, Mato Grosso

Pós-graduação em Química - IQ

Reguladores vegetais e alguns nutrientes minerais no desenvolvimento de plantas de tomateiro Pizzadoro enxertadas e não enxertadas

Pós-graduação em Agronomia (Horticultura) - FCA

Efeitos das lagoas de tratamento de esgoto sobre seu entorno: casos no Pontal do Paranapanema

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Eletro-oxidação de metanol e etanol sobre PtAu/C em meio alcalino

The development of electrocatalysts for the oxidation of methanol and ethanol is very important, because these alcohols may be used in the anode fuel cells which convert chemical energy directly into electrical energy with high efficiency, cleanly and with low noise. Thus, this study reports to the synthesis of nanocatalysts of PtAu supported on carbon by microemulsion method. The physical characterization of these catalysts is performed through the techniques of X-ray diffraction and transmission electron microscopy. The catalytic activity of the prepared materials was studied using conventional electrochemical techniques and also the technique of spectro-electrochemical in situ FTIR, which allows identification of intermediates and products of the reactions. From the x-ray diffraction, it was observed that the thermal treatment applied to catalysts favored incorporation of Au into the crystal lattice of Pt,that is, increased the formation of PtAu alloy. Micrographs indicated particle size about 3 nm to materials not heat treated and 9 nm to materials subjected to thermal treatment (heating at 150 ° C for 1h and 30 min in argon atmosphere). Current density oxidation of methanol on PtAu / C were superior to pure platinum. Spectroscopic results indicated the presence of formate in solution in 50:50 and the composition showed bands for CO2, indicating complete oxidation, in lower potential. During ethanol oxidation on the catalyst PtAu, the main product formed was acetate, product of incomplete oxidation. The good performance for methanol oxidation can be attributed to large amounts of oxygen species adsorbed on the catalyst surface, or an electronic effect.

O desenvolvimento de nanopartículas de intermetálicos ordenados de ouro e estudo da atividade eletroquímica da reação de oxidação do glicerol

Pós-graduação em Ciência e Tecnologia de Materiais - FC

Ambientes de pedrais como áreas estratégicas para a conservação da biodiversidade fluvial: um estudo da ictiofauna do rio Sapucaí-Mirim (SP) e suas interações tróficas

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Physical and chemical characterization of the pulp of different varieties of avocado targeting oil extraction potential

The aim of this study was to evaluate the physicochemical properties of avocado pulp of four different varieties (Avocado, Guatemala, Dickinson, and Butter pear) and to identify which has the greatest potential for oil extraction. Fresh avocado pulp was characterized by moisture, protein, fat, ash, carbohydrates and energy contents were determined. The carotenoids and chlorophyll contents were determined by the organic solvent extraction method. The results showed significant differences in the composition of the fruit when varieties are compared. However, the striking feature in all varieties is high lipid content; Avocado and Dickinson are the most suitable varieties for oil extraction, taking into account moisture content and the levels of lipids in the pulp. Moreover, it could be said that the variety Dickinson is the most affected by the parameters evaluated in terms of overall quality. Chlorophyll and carotenoids, fat-soluble pigments, showed a negative correlation with respect to lipids since it could be related to its function in the fruit. The varieties Avocado and Dickinson are an alternative to oil extraction having great commercial potential to be exploited thus avoiding waste and increasing farmers income.

Características físicas e químicas das águas superficiais e subterrâneas (nas proximidades do canal), dos ribeirões do Moquém e Água Clara (Médio Tietê Superior - SP), em função das variações hidrológicas

As teorias sobre o funcionamento dos sistemas lóticos evoluíram nos últimos anos, os condicionantes geológicos/geomorfológicos como também as regiões de transição têm recebido importância crescente. As regiões de transição merecem destaque uma vez que os sistemas lóticos estabelecem interações de fluxo com os ambientes vizinhos (atmosféricos, terrestres e subterrâneos) e a troca de materiais estabelecida entre esses sistemas é importante para a definição de suas características. As bacias hidrográficas dos ribeirões do Moquém e Água Clara, estudadas no presente trabalho, apresentam: proximidade geográfica além de semelhanças morfológicas e climáticas, porém diferem quanto aos aspectos geológicos e geomorfológicos. A partir desses aspectos, a presente pesquisa investigou as flutuações sazonais nas relações físicas, química e hidrológicas entre águas superficiais e subterrâneas (adjacências do canal), na região do baixo curso dos ribeirões já citados. Foram escolhidos dois trechos em cada ribeirão para a realização de: (1) inventário hidrológico mensal, a partir de medidas de velocidade de escoamento, vazão e do nível de água em poços instalados na região marginal dos rios nos trechos de estudo; (2) caracterização física e química de testemunhos da região marginal dos rios, onde foram utilizadas amostras obtidas durante a perfuração dos poços; (3) amostragens das águas superficiais subterrâneas no mesmo período do inventário para a determinação das características físicas e químicas das mesmas. Os resultados destacaram os seguintes itens. O fluxo de base garantiu vazões regulares e elevadas ao ribeirão Água Clara, ao mesmo tempo que as vazões foram quase insignificantes no ribeirão do Moquém, fato esse que apresenta importância ecológica. A química das águas dos ribeirões estudados é distinta, possivelmente, como resposta às características naturais das bacias. Nos dois trechos de estudo, as águas superficiais e subterrâneas apresentaram diferenças físicas e químicas, o que pode indicar que as trocas entre o canal do rio e suas adjacências são pequenas e/ou lentas. Com base nas observações desta pesquisa, recomenda-se que as características quantitativas e qualitativas, distintas, entre as águas dos ribeirões do Moquém e Água Clara devem ser avaliadas durante a tomada de decisões em processos de gestão de recursos hídricos.