Composition effects on ion transport in a polyelectrolyte gel with the addition of ion dissociators

The polymerization of lithium 2-acrylamido-2-methyl-1-propane sulphonic acid with N,N′-dimethylacrylamide has yielded polyelectrolyte gels which have the favourable property of being single ion conductors. The use of single ion conductors ensures that the transport number of lithium is close to unity. The mobility of the lithium ion is still quite low in these systems, resulting in low ionic conductivity. To increase ionic conductivity more charge carriers can be added however competing effects arise between increasing the number of charge carriers and decreasing the mobility of these charge carriers. In this paper the monomer ratio of the copolymer polyelectrolyte is varied to investigate the effect increasing the number of charge carriers has on the ionic conductivity and lithium ion and solvent diffusivity using pfg-NMR. Ion dissociators such as TiO₂ nano-particles and a zwitterionic compound based on 1-butylimidazolium-3-(N-butanesulfonate) have been added in an attempt to further increase the ionic conductivity of the system. It was found that the system with the highest ionic conductivity had the lowest solvent mobility in the presence of zwitterion. Without zwitterion the mobility of the solvent appears to determine the maximum ionic conductivity achievable.

Relationship between verbal working memory and the SCAN-C in children with specific language impairment

Purpose: An ongoing concern with the evaluation of auditory processing disorders is the extent that assessment instruments are influenced by higher order cognitive functions. This study examined the relationship between verbal working memory and performance on the Test for Auditory Processing Disorders in Children--Revised (SCAN-C; Keith, 2000b) in children with specific language impairment (SLI) and typically developing (TD) children.

Method: Sixteen children with SLI and 16 TD children ages 8/4 to 11 years participated in the study. The children were presented with the SCAN-C and tests measuring verbal working memory.

Results: Initial comparisons revealed that the SLI group obtained significantly lower scores than the TD group on the SCAN-C. However, after controlling for verbal working memory, significant differences between the 2 groups were no longer observed. Correlational analyses revealed that the composite score from the SCAN-C was related to all tests assessing verbal working memory.

Conclusions: Performance on the SCAN-C may be related to working memory functioning. As a consequence, it is unclear whether difficulty on this task should be viewed as a problem with auditory processing or a problem with verbal working memory.

Association of high-sensitivity C-reactive protein with de novo major depression

Background: Although there is cross-sectional evidence that changes in the immune system contribute to the pathophysiology of depression, longitudinal data capable of elucidating cause and effect relationships are lacking.

Aims: We aimed to determine whether subclinical systemic inflammation, as measured by serum high-sensitivity C-reactive protein (hsCRP) concentration, is associated with an increased risk of de novo major depressive disorder.

Method: Major depressive disorder was diagnosed using a clinical interview (SCID-I/NP). This is a retrospective cohort study; from a population-based sample of 1494 randomly selected women recruited at baseline during the period 1994-7, 822 were followed for a decade and provided measures of both exposure and outcome. Of these women, 644 (aged 20-84 years) had no prior history of depression at baseline and were eligible for analysis.

Results: During 5827 person-years of follow-up, 48 cases of de novo major depressive disorder were identified. The hazard ratio (HR) for depression increased by 44% for each standard deviation increase in log-transformed hsCRP (ln-hsCRP) (HR = 1.44, 95% CI 1.04-1.99), after adjusting for weight, smoking and use of non-steroidal anti-inflammatory drugs. Further adjustment for other lifestyle factors, medications and comorbidity failed to explain the observed increased risk for depression.

Conclusions: Serum hsCRP is an independent risk marker for de novo major depressive disorder in women. This supports an aetiological role for inflammatory activity in the pathophysiology of depression.

Numerical simulations on warm forming of stainless steel with trip-effect

In steels with TRIP-effect, a phase transformation from the retained-austenite to martensite occurs during forming, and it significantly affects hardening behaviours. Such an effect is sensitive to the amount of strain as well as the temperature variation. For materials with a strong TRIP-effect, new forming techniques are needed to develop that can lead to lighter and stronger components in automotive industry. This paper presents a coupled thermo-mechanical finite element modelling and simulation of a warm deep drawing of austenitic stainless steel (including a TRIP-effect) using LS-DYNA and temperature effect on forming process of such materials is investigated.

Corn and soybean meal metabolizable energy with the addition of exogenous enzymes for poultry

Two metabolism assays were carried out to determine corn and soybean meal metabolizable energy when enzymes were added. In the first trial, 35 cockerels per studied feedstuff (corn and soybean meal) were distributed in a completely randomized experimental design with four treatments of seven replicates of one bird each. The evaluated treatments were: ingredient (corn and soybean meal) with no enzyme addition, with the addition of an enzyme complex (xylanase, amylase, protease - XAP), xylanase, or phytase. Precise feeding method was used to determine true metabolizable energy corrected for nitrogen balance (TMEn). The use of enzymes did not result in any differences (p>0.05) in soybean meal TMEn, but phytase improved corn TMEn in 2.3% (p=0.004). In the second trial, 280 seven-day-old broiler chicks were distributed in a completely randomized experimental design with seven treatments of five replicates of eight birds each. Treatments consisted of corn with no enzyme addition or with the addition of amylase, xylanase, phytase, XAP complex, XAP+phytase combination, or xylanase/ pectinase/β-glucanase complex (XPBG). Corn was supplemented with macro and trace minerals. Total excreta collection was used to determine apparent metabolizable energy corrected for nitrogen balance (AMEn). Differences were observed (p=0.08) in AMEn and dry matter metabolizability coefficient (p=0.03). The combination of the XAP complex with phytase promoted a 2.11% increase in corn AMEn values, and the remaining enzymes allowed increased between 0.86% and 1.66%.

Evaluation of physicochemical, microbiological and sensorial characteristics of fermented milk beverages with buttermilk addition

This study evaluated three fermented milk beverages to which had been added sugar strawberry puree post-fermentation. The base was composed of 70% of milk, with whey and buttermilk in the concentrations of 30% and 0%, 15% and 15%, and 0% and 30%, respectively. The starter culture developed well with all formulations reaching pH 4.74.9 in 180 min of fermentation. Lactic acid bacteria in the products were above 8 log cfu/mL throughout the study. The beverages presented similar pH, acidity and viscosity. Buttermilk and whey can be interesting ingredients to be added into fermented milk beverages, because the consumers liked all the products equally, which had an average acceptance score exceeding liked moderately.

Storage sites in seeds of Caesalpinia echinata and C. ferrea (Leguminosae) with considerations on nutrients flow

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

On designing OTA-C graphic-equalizers with MOSFET-triode transconductors

A CMOS audio-equalizer based on a parallel-array of 2nd-order bandpass-sections is presented and realized with triode transconductors. It has a programmable 12db-boost/cut on each of its three decade-bands, easily achieved through the linear dependence of gm on VDS. In accordance with a 0.8μm n-well double-metal fabrication process, a range of simulations supports theoretical analysis and circuit performance at different boost/cut scenarios. For VDD=3.3V, fullboosting stand-by prover consumption is 1.05mW. THD=-42.61dB@1Vpp and may be improved by balanced structures. Thermal- and I/f-noise spectral densities are 3.2μV/Hz12 and 18.2μV/Hz12@20Hz, respectively, for a dynamic range of 52.3dB@1Vpp. The equalizer effective area is 2.4mm2. The drawback of the existing transmission-zero due to the feedthrough-capacitance of a triode input-device is also addressed. The proposed topology can be extended to the design of more complex graphic-equalizers and hearing-aids.

Phase transformations in the Cu-Al alloy with Ag addition

The effect of Ag addition on the phase transformations that occur in the Cu-10% Al alloy was studied using differential thermal analysis, scanning electron and optical microscopies and energy dispersive X-ray analysis. The results indicated that Ag addition is responsible for the separation of the reverse martensitic transformation in two stages, and for the refinement of the α-phase grains. The relative amount of the β1 martensitic phase, retained on slow cooling (above 2 K min-1 of cooling rate), and the relative fraction of phase α2 are increased. The solubility limit of Ag in the matrix is close to 6 mass% and at this concentration the maximum stability of the β-phase is reached. © 2005 Akadémiai Kiadó, Budapest.

Aspectos metalúrgicos de revestimentos em dutos depositados com a superliga de níquel ERNiCrMo-4 pelos processos MIG convencional e MIG com adição de arame frio

Este trabalho estuda o perfil metalúrgico de revestimentos em dutos depositados pelos processos MIG C e MIG AF. A indústria petroquímica, e outras que utilizam dutos como meio de transporte de seus insumos, depara-se com um grande desafio: como aumentar a vida útil desses dutos em um ambiente severo de trabalho. No caso específico da petroquímica, os dutos servem como meio de transporte para petróleo e gás, que são produtos extremamente agressivos às paredes internas desses tubos que sofrem degradação por corrosão causada, principalmente, pela composição química, pressão e temperatura desses produtos. Nesse contexto a soldagem de revestimentos realizada com ligas à base de Níquel, torna-se uma excelente opção para a construção, reparo e manutenção de equipamentos cuja aplicação seja voltada a ambientes severos de trabalho, tornando possível aperfeiçoar as características requeridas, como por exemplo, a resistência à corrosão. É nesse cenário que surge o mote para a realização desta pesquisa, baseada em trabalhos que indicam que o processo de soldagem MIG/MAG com o da adição de arame frio possui a finalidade de avaliar as características metalúrgicas do revestimento em dutos depositados pelo processo derivativo MIG convencional – MIG-C e MIG com adição de arame frio – MIG AF – utilizando a liga de Níquel ERNiCrMo-4 em dutos de aço carbono. As soldas foram depositadas em dutos de diâmetro de 228,6 mm, formando uma camada de revestimento interno de quatro passes, divididos em três segmentos da circunferência do duto, em três diferentes energias de soldagem: 1,1; 0,9 e 0,7 kJ/mm. Desses segmentos retiraram-se corpos de prova dos dutos para a produção das amostras. Após a metalografia, realizada nas amostras, seguiu-se com a análise e caracterização ao microscópio óptico, microscópio eletrônico de varredura e ensaio de microdureza. Os revestimentos apresentaram excelente qualidade superficial para todos os pacotes operacionais aplicados na obtenção das soldas. As análises das regiões estudadas: metal de base; zona parcialmente misturada e zona termicamente afetada, mostraram-se compatíveis com os da literatura estudada, tanto para o MIG com adição de arame frio, quanto para o convencional. Na ZTA, foram observados valores de Tungstênio em torno de 1,0%, o aumento dos níveis de dureza foi creditado a esse fato. Os resultados de microdureza indicaram que para ambos os casos, MIG C e MIG AF, nas 4 regiões analisadas ocorreram de maneira semelhante, sendo a região da ZTA a que apresentou maiores valores na faixa de 400 a 500 HV, enquanto que nas demais regiões a faixa ficou entre 250 a 350 HV. Os resultados indicam que o processo com arame frio, MIG AF, mostrou-se tão eficiente quanto o convencional, MIG C. A energia de soldagem aumentou a diluição de Fe no metal de solda. Precipitados ricos em Mo e Cr foram encontrados no metal de solda.

DNA damage in BALB/c mice infected with Lacazia loboi and its relation to nutritional status

Background: Jorge Lobo's disease, also known as lacaziosis, is a cutaneous-subcutaneous mycosis with chronic evolution. It is caused by the fungus Lacazia loboi. Herein we report a study that relates the genotoxicity caused by L. loboi in isogenic mice with nutritional status, through a normal or restricted diet.Methods: DNA damage was assessed in the peripheral blood by the comet assay (tail intensity).Results: The results for leukocytes showed increases in the mean tail intensity in mice under dietary restriction, in infected mice under dietary restriction and in infected mice ingesting a normal diet.Conclusion: These results indicate that dietary restriction and L. loboi infection may increase DNA damage levels in mice, as detected by the comet assay.