Analysis of the operator action and the single failure criteria in a SGTR sequence using best estimate assumptions with TRACE 5.0

Steam Generator Tube Rupture (SGTR) sequences in Pressurized Water Reactors are known to be one of the most demanding transients for the operating crew. SGTR are a special kind of transient as they could lead to radiological releases without core damage or containment failure, as they can constitute a direct path from the reactor coolant system to the environment. The first methodology used to perform the Deterministic Safety Analysis (DSA) of a SGTR did not credit the operator action for the first 30 min of the transient, assuming that the operating crew was able to stop the primary to secondary leakage within that period of time. However, the different real SGTR accident cases happened in the USA and over the world demonstrated that the operators usually take more than 30 min to stop the leakage in actual sequences. Some methodologies were raised to overcome that fact, considering operator actions from the beginning of the transient, as it is done in Probabilistic Safety Analysis. This paper presents the results of comparing different assumptions regarding the single failure criteria and the operator action taken from the most common methodologies included in the different Deterministic Safety Analysis. One single failure criteria that has not been analysed previously in the literature is proposed and analysed in this paper too. The comparison is done with a PWR Westinghouse three loop model in TRACE code (Almaraz NPP) with best estimate assumptions but including deterministic hypothesis such as single failure criteria or loss of offsite power. The behaviour of the reactor is quite diverse depending on the different assumptions made regarding the operator actions. On the other hand, although there are high conservatisms included in the hypothesis, as the single failure criteria, all the results are quite far from the regulatory limits. In addition, some improvements to the Emergency Operating Procedures to minimize the offsite release from the damaged SG in case of a SGTR are outlined taking into account the offsite dose sensitivity results.

Análisis de Ruido en Reactores PWR

Esta tesis se ha llevado a cabo persiguiendo dos objetivos principales: uno de ellos es el desarrollo y la aplicación de modelos para el mantenimiento predictivo de sensores en centrales nucleares, y el otro es profundizar en el entendimiento de los fenómenos que tienen influencia en el ruido de la señal de los detectores de neutrones de los reactores de agua a presión con ayuda de herramientas de simulación 3D. Para el desarrollo de los trabajos se ha contado con medidas de ruido de reactores PWR actualmente en operación registradas en el curso de la tesis. El análisis de estas medidas ha permitido desarrollar los modelos de los sensores a partir de sus señales reales y comparar lo obtenido en las simulaciones con la realidad. El estudio de los sensores y la elaboración de los modelos se han llevado a cabo mediante la aplicación de técnicas autorregresivas a las señales tomadas en planta. Para la reproducción de los fenómenos que tienen lugar en el núcleo del reactor y que pueden influir en el ruido neutrónico se ha contado con códigos neutrónicos ampliamente utilizados en la industria y con modelos actualizados y validados de las plantas. ABSTRACT There are two goals in this thesis. The first one is the development of models and its application for predictive maintenance of sensors in nuclear power plants. The second one is to improve the understanding of the phenomena that influence the neutron noise in pressurized water reactors by using 3D simulators. Real plant measurements recorded during this thesis have been used to achieve such goals. The information provided by the data led the development of the models and the comparison of the results provided by the computational simulations. Sensor models were obtained by applying autorregresive techniques to the signals recorded in the plant. Wide known codes in the nuclear industry as well as updated and validated models have been used for the reproduction of the phenomena that take place in the core an may influence the neutron noise.

Análisis de secuencias de accidente de pérdida de refrigerante en centrales nucleares de agua a presión mediante la metodología ISA

El accidente de pérdida de refrigerante (LOCA) en un reactor nuclear es uno de los accidentes Base de Diseño más preocupantes y estudiados desde el origen del uso de la tecnología de fisión en la industria productora de energía. El LOCA ocupa, desde el punto de vista de los análisis de seguridad, un lugar de vanguardia tanto en el análisis determinista (DSA) como probabilista (PSA), cuya diferenciada perspectiva ha ido evolucionando notablemente en lo que al crédito a la actuación de las salvaguardias y las acciones del operador se refiere. En la presente tesis se aborda el análisis sistemático de de las secuencias de LOCA por pequeña y mediana rotura en diferentes lugares de un reactor nuclear de agua a presión (PWR) con fallo total de Inyección de Seguridad de Alta Presión (HPSI). Tal análisis ha sido desarrollado en base a la metodología de Análisis Integrado de Seguridad (ISA), desarrollado por el Consejo de Seguridad Nuclear (CSN) y consistente en la aplicación de métodos avanzados de simulación y PSA para la obtención de Dominios de Daño, que cuantifican topológicamente las probabilidades de éxito y daño en función de determinados parámetros inciertos. Para la elaboración de la presente tesis, se ha hecho uso del código termohidráulico TRACE v5.0 (patch 2), avalado por la NRC de los EEUU como código de planta para la simulación y análisis de secuencias en reactores de agua ligera (LWR). Los objetivos del trabajo son, principalmente: (1) el análisis exhaustivo de las secuencias de LOCA por pequeña-mediana rotura en diferentes lugares de un PWR de tres lazos de diseño Westinghouse (CN Almaraz), con fallo de HPSI, en función de parámetros de gran importancia para los transitorios, tales como el tamaño de rotura y el tiempo de retraso en la respuesta del operador; (2) la obtención y análisis de los Dominios de Daño para transitorios de LOCA en PWRs, de acuerdo con la metodología ISA; y (3) la revisión de algunos de los resultados genéricos de los análisis de seguridad para secuencias de LOCA en las mencionadas condiciones. Los resultados de la tesis abarcan tres áreas bien diferenciadas a lo largo del trabajo: (a) la fenomenología física de las secuencias objeto de estudio; (b) las conclusiones de los análisis de seguridad practicados a los transitorios de LOCA; y (c) la relevancia de las consecuencias de las acciones humanas por parte del grupo de operación. Estos resultados, a su vez, son de dos tipos fundamentales: (1) de respaldo del conocimiento previo sobre el tipo de secuencias analizado, incluido en la extensa bibliografía examinada; y (2) hallazgos en cada una de las tres áreas mencionadas, no referidos en la bibliografía. En resumidas cuentas, los resultados de la tesis avalan el uso de la metodología ISA como método de análisis alternativo y sistemático para secuencias accidentales en LWRs. ABSTRACT The loss of coolant accident (LOCA) in nuclear reactors is one of the most concerning and analized accidents from the beginning of the use of fission technology for electric power production. From the point of view of safety analyses, LOCA holds a forefront place in both Deterministic (DSA) and Probabilistic Safety Analysis (PSA), which have significantly evolved from their original state in both safeguard performance credibility and human actuation. This thesis addresses a systematic analysis of small and medium LOCA sequences, in different places of a nuclear Pressurized Water Reactor (PWR) and with total failure of High Pressure Safety Injection (HPSI). Such an analysis has been grounded on the Integrated Safety Assessment (ISA) methodology, developed by the Spanish Nuclear Regulatory Body (CSN). ISA involves the application of advanced methods of simulation and PSA for obtaining Damage Domains that topologically quantify the likelihood of success and damage regarding certain uncertain parameters.TRACE v5.0 (patch 2) code has been used as the thermalhydraulic simulation tool for the elaboration of this work. Nowadays, TRACE is supported by the US NRC as a plant code for the simulation and analysis of sequences in light water reactors (LWR). The main objectives of the work are the following ones: (1) the in-depth analysis of small and medium LOCA sequences in different places of a Westinghouse three-loop PWR (Almaraz NPP), with failed HPSI, regarding important parameters, such as break size or delay in operator response; (2) obtainment and analysis of Damage Domains related to LOCA transients in PWRs, according to ISA methodology; and (3) review some of the results of generic safety analyses for LOCA sequences in those conditions. The results of the thesis cover three separated areas: (a) the physical phenomenology of the sequences under study; (b) the conclusions of LOCA safety analyses; and (c) the importance of consequences of human actions by the operating crew. These results, in turn, are of two main types: (1) endorsement of previous knowledge about this kind of sequences, which is included in the literature; and (2) findings in each of the three aforementioned areas, not reported in the reviewed literature. In short, the results of this thesis support the use of ISA-like methodology as an alternative method for systematic analysis of LWR accidental sequences.

Synthesis of a thymidyl pentamer of deoxyribonucleic guanidine and binding studies with DNA homopolynucleotides.

Replacement of the phosphodiester linkages of the polyanion DNA with guanidine linkers provides the polycation deoxynucleic guanidine (DNG). The synthesis of pentameric thymidyl DNA is provided. This polycationic DNG species binds with unprecedented affinity and with base-pair specificity to negatively charged poly(dA) to provide both double and triple helices. The dramatic stability of these hybrid structures is shown by their denaturation temperatures (Tm). For example, the double helix of the pentameric thymidyl DNG and poly(dA) does not dissociate in boiling water (ionic strength = 0.12), whereas the Tm for pentameric thymidyl DNA associated with poly(dA) is approximately 13 degrees C (ionic strength = 0.12). The effect of ionic strength on Tm for DNG complexes with DNA shows an opposite correlation compared with double-stranded DNA and is much more dramatic than for double-stranded DNA.

Applicazioni degli acciai inossidabili in sistemi per la produzione di energia.

Questo elaborato ha lo scopo di esporre quelli che sono i vantaggi derivanti dall' utilizzo degli acciai inossidabili, specificando il tipo di componente e le ragioni della scelta, nei sistemi per la produzione di energia: dalle turbine, agli impianti nucleari, fino agli impianti che sfruttano le energie alternative (solare, eolica, geotermica, biogas). Inizialmente viene fornito un quadro generale sui differenti tipi di acciai inox (martensitici, ferritici, austenitici e duplex, con le relative proprietà, sottolineandone vantaggi e svantaggi), descrivendone anche i sistemi di designazione, con particolare attenzione alla norma AISI (American Iron and Steel Institute). Una volta messe in risalto queste caratteristiche, vengono esaminati e descritti diversi sistemi di produzione di energia in cui gli acciai inox trovano applicazione: si parte dalle turbine (idraulica, a vapore e a gas), spiegando i benefici nell'utilizzo di particolari categorie di acciai inox nella realizzazione di alcuni dei componenti per questi impianti. Vengono quindi esaminati gli impianti nucleari, partendo da quelli che utilizzano come moderatore e fluido refrigerante acqua naturale, ("PWR", Pressurized Water Reactor) e ("BWR", Boiling Water Reactor), fino a quelli che utilizzano invece acqua pesante ("CANDU", Canadian Deuterium Uranium Reactor), nonchè i reattori veloci ("FBR", Fast Breeding Reactor). Infine, vengono esaminate le applicazioni degli acciai inox, nei sistemi per la produzione di energia che, sfruttano fonti alternative (elencate in precedenza).

Reactor hot channel factors and burnout : a literature search /

"November 1962."

PWR fuel element specifications.

"Reactors - Power (TID-4500, 13th Edition)."

The hydrogen sulfide dual-temperature process : a bibliography of selected report literature /

Cover title.

Round-robin pretest analyses of a 1:6-scale reinforced concrete containment model subject to static internal pressurization /

"SAND87-0891, R1 and RD."

Experiment data report for LOFT anticipated transient with multiple failures experiment L9-1 and small break experiment L3-3 /

"Published June 1981."

Summary of FY 79 progress on Refill Effects Program : quarterly progress report, July 1 - September 30, 1979 /

"Date published: March 1980."

TRAC-PF1 MOD1 post test calculations of the OECD LOFT experiment LP-SB-1 /

Mode of access: Internet.

TRAC-PF1/MOD1 post-test calculations of the OECD LOFT experiment LP-SB-3 /

Mode of access: Internet.

Proceedings of the Joint NRC/ANS Meeting on Basic Thermal Hydraulic Mechanisms in LWR Analysis, held at Bethesda, Maryland, September 14-15, 1982 /

Includes bibliographical references.

A study of some constituents in human female saliva

Changes in the concentration of some constituents in women's saliva during the menstrual cycle were studied. Saliva was used because it is easier to collect than other body fluids and is continuously available for analysis. Glucose, the enzyme 17-Acetyl-D-glucosaminidase (NAG) and Calcium which are saliva constituents and belong to three different chemical groups were selected for the study. Several analytical techniques were investigated. The fluorometric assay procedure was found to be the best because of its specificity and sensitivity for the estimation of these constituents. resides the fluorametric method a spectrophotometric method was used in the NAG determination and an atomic absorption method in the calcium estimation. Glucose was estimated by an enzymatic method. This is based on the reaction of glucose with the enzymes glucose oxidase and peroxidase to yield hydrogen peroxide, which in turn oxidises a non-fluorescent substrate, p-hydroxyphenylacetic acid, to a highly fluorescent product. The saliva samples in this determination had to be centrifuged at high speed, heated in a boiling water bath, centrifuged again and then treated with a mixture of cation and anion resins to remove the substances that inhibited the enzyme system. In the determination of the NAG activity the saliva samples were diluted with citric acid/phosphate buffer, and then centrifuged at high speed. The assay was based on the enzymic hydrolysis of the non-fluorescent substrate 4-Methyl-umbelli1eryl-p-D-glucosaminide to the highly fluorescent 4-Methyl-umbelliferone• Calcium was estimated by a fluorometric procedure based upon the measurement of the fluorescence produced by the complex formed between calcein blue and calcium, at pH 9 - 13. From the results obtained from the analysis of saliva samples of several women it was found that glucose showed a significant increase in its level around the expected time of ovulation. This was found in seven cycles out of ten. Similar results were found with the enzyme NAG. No significant change in the calcium levels was observe& at any particular time of the cycle. The levels of the glucose, the activity of the enzyme NAG and the concentration of the calcium were found to change daily, and to differ from one subject to another and in the same subject from cycle to cycle. The increase observed it salivary glucose levels and the enzyme NAG activity could be monitored to predict the time of ovulation.