Natural history of placebo treatment in adults acquiring travelers' diarrhea in Mexico

The natural history of placebo treated travelers' diarrhea and the prognostic factors of recovery from diarrhea were evaluated using 9 groups of placebo treated subjects from 9 clinical trial studies conducted since 1975, for use as a historical control in the future clinical trial of antidiarrheal agents. All of these studies were done by the same group of investigators in one site (Guadalajara, Mexico). The studies are similar in terms of population, measured parameters, microbiologic identification of enteropathogens and definitions of parameters. The studies had two different durations of followup. In some studies, subjects were followed for two days, and in some they were followed for five days.^ Using definitions established by the Infectious Diseases society of America and the Food and Drug Administration, the following efficacy parameters were evaluated: Time to last unformed stool (TLUS), number of unformed stools post-initiation of placebo treatment for five consecutive days of followup, microbiologic cure, and improvement of diarrhea. Among the groups that were followed for five days, the mean TLUS ranged from 59.1 to 83.5 hours. Fifty percent to 78% had diarrhea lasting more than 48 hours and 25% had diarrhea more than five days. The mean number of unformed stools passed on the first day post-initiation of therapy ranged from 3.6 to 5.8 and, for the fifth day ranged from 0.5 to 1.5. By the end of followup, diarrhea improved in 82.6% to 90% of the subjects. Subjects with enterotoxigenic E. coli had 21.6% to 90.0% microbiologic cure; and subjects with shigella species experienced 14.3% to 60.0% microbiologic cure.^ In evaluating the prognostic factors of recovery from diarrhea (primary efficacy parameter in evaluating the efficacy of antidiarrheal agents against travelers' diarrhea). The subjects from five studies were pooled and the Cox proportional hazard model was used to evaluate the predictors of prolonged diarrhea. After adjusting for design characteristics of each trial, fever with a rate ratio (RR) of 0.40, presence of invasive pathogens with a RR of 0.41, presence of severe abdominal pain and cramps with a RR of 0.50, number of watery stools more than five with a RR of 0.60, and presence of non-invasive pathogens with a RR of 0.84 predicted a longer duration of diarrhea. Severe vomiting with a RR of 2.53 predicted a shorter duration of diarrhea. The number of soft stools, presence of fecal leukocytes, presence of nausea, and duration of diarrhea before enrollment were not associated with duration of diarrhea. ^

A Bayesian analysis for spatial processes with application to mapping

In geographical epidemiology, maps of disease rates and disease risk provide a spatial perspective for researching disease etiology. For rare diseases or when the population base is small, the rate and risk estimates may be unstable. Empirical Bayesian (EB) methods have been used to spatially smooth the estimates by permitting an area estimate to "borrow strength" from its neighbors. Such EB methods include the use of a Gamma model, of a James-Stein estimator, and of a conditional autoregressive (CAR) process. A fully Bayesian analysis of the CAR process is proposed. One advantage of this fully Bayesian analysis is that it can be implemented simply by using repeated sampling from the posterior densities. Use of a Markov chain Monte Carlo technique such as Gibbs sampler was not necessary. Direct resampling from the posterior densities provides exact small sample inferences instead of the approximate asymptotic analyses of maximum likelihood methods (Clayton & Kaldor, 1987). Further, the proposed CAR model provides for covariates to be included in the model. A simulation demonstrates the effect of sample size on the fully Bayesian analysis of the CAR process. The methods are applied to lip cancer data from Scotland, and the results are compared. ^

Logistic regression with incompletely observed binary

Logistic regression is one of the most important tools in the analysis of epidemiological and clinical data. Such data often contain missing values for one or more variables. Common practice is to eliminate all individuals for whom any information is missing. This deletion approach does not make efficient use of available information and often introduces bias.^ Two methods were developed to estimate logistic regression coefficients for mixed dichotomous and continuous covariates including partially observed binary covariates. The data were assumed missing at random (MAR). One method (PD) used predictive distribution as weight to calculate the average of the logistic regressions performing on all possible values of missing observations, and the second method (RS) used a variant of resampling technique. Additional seven methods were compared with these two approaches in a simulation study. They are: (1) Analysis based on only the complete cases, (2) Substituting the mean of the observed values for the missing value, (3) An imputation technique based on the proportions of observed data, (4) Regressing the partially observed covariates on the remaining continuous covariates, (5) Regressing the partially observed covariates on the remaining continuous covariates conditional on response variable, (6) Regressing the partially observed covariates on the remaining continuous covariates and response variable, and (7) EM algorithm. Both proposed methods showed smaller standard errors (s.e.) for the coefficient involving the partially observed covariate and for the other coefficients as well. However, both methods, especially PD, are computationally demanding; thus for analysis of large data sets with partially observed covariates, further refinement of these approaches is needed. ^

DISTRIBUTION FUNCTIONS, MEAN SQUARED ERRORS, AND CONFIDENCE LIMITS FOR RIDGE REGRESSION ESTIMATORS

A large number of ridge regression estimators have been proposed and used with little knowledge of their true distributions. Because of this lack of knowledge, these estimators cannot be used to test hypotheses or to form confidence intervals.^ This paper presents a basic technique for deriving the exact distribution functions for a class of generalized ridge estimators. The technique is applied to five prominent generalized ridge estimators. Graphs of the resulting distribution functions are presented. The actual behavior of these estimators is found to be considerably different than the behavior which is generally assumed for ridge estimators.^ This paper also uses the derived distributions to examine the mean squared error properties of the estimators. A technique for developing confidence intervals based on the generalized ridge estimators is also presented. ^

A SIMULATION STUDY OF THE SIZE AND POWER OF SOME TWO-SAMPLE TESTS FOR UNEQUALLY CENSORED SURVIVAL DATA (RANK TESTS, LOGRANK, PROPORTIONAL HAZARDS, WILCOXON TESTS, EXPONENTIAL DISTRIBUTION)

Sizes and power of selected two-sample tests of the equality of survival distributions are compared by simulation for small samples from unequally, randomly-censored exponential distributions. The tests investigated include parametric tests (F, Score, Likelihood, Asymptotic), logrank tests (Mantel, Peto-Peto), and Wilcoxon-Type tests (Gehan, Prentice). Equal sized samples, n = 18, 16, 32 with 1000 (size) and 500 (power) simulation trials, are compared for 16 combinations of the censoring proportions 0%, 20%, 40%, and 60%. For n = 8 and 16, the Asymptotic, Peto-Peto, and Wilcoxon tests perform at nominal 5% size expectations, but the F, Score and Mantel tests exceeded 5% size confidence limits for 1/3 of the censoring combinations. For n = 32, all tests showed proper size, with the Peto-Peto test most conservative in the presence of unequal censoring. Powers of all tests are compared for exponential hazard ratios of 1.4 and 2.0. There is little difference in power characteristics of the tests within the classes of tests considered. The Mantel test showed 90% to 95% power efficiency relative to parametric tests. Wilcoxon-type tests have the lowest relative power but are robust to differential censoring patterns. A modified Peto-Peto test shows power comparable to the Mantel test. For n = 32, a specific Weibull-exponential comparison of crossing survival curves suggests that the relative powers of logrank and Wilcoxon-type tests are dependent on the scale parameter of the Weibull distribution. Wilcoxon-type tests appear more powerful than logrank tests in the case of late-crossing and less powerful for early-crossing survival curves. Guidelines for the appropriate selection of two-sample tests are given. ^

POLYCHOTOMOUS LOGISTIC REGRESSION ANALYSIS (HYPERTENSION, CORONARY HEART DISEASE)

The history of the logistic function since its introduction in 1838 is reviewed, and the logistic model for a polychotomous response variable is presented with a discussion of the assumptions involved in its derivation and use. Following this, the maximum likelihood estimators for the model parameters are derived along with a Newton-Raphson iterative procedure for evaluation. A rigorous mathematical derivation of the limiting distribution of the maximum likelihood estimators is then presented using a characteristic function approach. An appendix with theorems on the asymptotic normality of sample sums when the observations are not identically distributed, with proofs, supports the presentation on asymptotic properties of the maximum likelihood estimators. Finally, two applications of the model are presented using data from the Hypertension Detection and Follow-up Program, a prospective, population-based, randomized trial of treatment for hypertension. The first application compares the risk of five-year mortality from cardiovascular causes with that from noncardiovascular causes; the second application compares risk factors for fatal or nonfatal coronary heart disease with those for fatal or nonfatal stroke. ^

THE USE OF MULTIVARIATE ANALYSIS OF COVARIANCE IN EVALUATING THE COMPARABILITY OF LABORATORY DETERMINATIONS IN COOPERATIVE STUDIES

The role of clinical chemistry has traditionally been to evaluate acutely ill or hospitalized patients. Traditional statistical methods have serious drawbacks in that they use univariate techniques. To demonstrate alternative methodology, a multivariate analysis of covariance model was developed and applied to the data from the Cooperative Study of Sickle Cell Disease.^ The purpose of developing the model for the laboratory data from the CSSCD was to evaluate the comparability of the results from the different clinics. Several variables were incorporated into the model in order to control for possible differences among the clinics that might confound any real laboratory differences.^ Differences for LDH, alkaline phosphatase and SGOT were identified which will necessitate adjustments by clinic whenever these data are used. In addition, aberrant clinic values for LDH, creatinine and BUN were also identified.^ The use of any statistical technique including multivariate analysis without thoughtful consideration may lead to spurious conclusions that may not be corrected for some time, if ever. However, the advantages of multivariate analysis far outweigh its potential problems. If its use increases as it should, the applicability to the analysis of laboratory data in prospective patient monitoring, quality control programs, and interpretation of data from cooperative studies could well have a major impact on the health and well being of a large number of individuals. ^

A STUDY OF INFLUENZA AND OF STATISTICAL METHODS USED TO REPORT INFLUENZA

This paper defines and compares several models for describing excess influenza pneumonia mortality in Houston. First, the methodology used by the Center for Disease Control is examined and several variations of this methodology are studied. All of the models examined emphasize the difficulty of omitting epidemic weeks.^ In an attempt to find a better method of describing expected and epidemic mortality, time series methods are examined. Grouping in four-week periods, truncating the data series to adjust epidemic periods, and seasonally-adjusting the series y(,t), by:^ (DIAGRAM, TABLE OR GRAPHIC OMITTED...PLEASE SEE DAI)^ is the best method examined. This new series w(,t) is stationary and a moving average model MA(1) gives a good fit for forecasting influenza and pneumonia mortality in Houston.^ Influenza morbidity, other causes of death, sex, race, age, climate variables, environmental factors, and school absenteeism are all examined in terms of their relationship to influenza and pneumonia mortality. Both influenza morbidity and ischemic heart disease mortality show a very high relationship that remains when seasonal trends are removed from the data. However, when jointly modeling the three series it is obvious that the simple time series MA(1) model of truncated, seasonally-adjusted four-week data gives a better forecast.^

BEST SUBSET SELECTION FOR CATEGORICAL DATA

When choosing among models to describe categorical data, the necessity to consider interactions makes selection more difficult. With just four variables, considering all interactions, there are 166 different hierarchical models and many more non-hierarchical models. Two procedures have been developed for categorical data which will produce the "best" subset or subsets of each model size where size refers to the number of effects in the model. Both procedures are patterned after the Leaps and Bounds approach used by Furnival and Wilson for continuous data and do not generally require fitting all models. For hierarchical models, likelihood ratio statistics (G('2)) are computed using iterative proportional fitting and "best" is determined by comparing, among models with the same number of effects, the Pr((chi)(,k)('2) (GREATERTHEQ) G(,ij)('2)) where k is the degrees of freedom for ith model of size j. To fit non-hierarchical as well as hierarchical models, a weighted least squares procedure has been developed.^ The procedures are applied to published occupational data relating to the occurrence of byssinosis. These results are compared to previously published analyses of the same data. Also, the procedures are applied to published data on symptoms in psychiatric patients and again compared to previously published analyses.^ These procedures will make categorical data analysis more accessible to researchers who are not statisticians. The procedures should also encourage more complex exploratory analyses of epidemiologic data and contribute to the development of new hypotheses for study. ^

REGRESSION ANALYSIS FOR STANDARDIZED MORTALITY RATIOS WITH APPLICATION TO OCCUPATIONAL FOLLOW-UP STUDIES

Traditional comparison of standardized mortality ratios (SMRs) can be misleading if the age-specific mortality ratios are not homogeneous. For this reason, a regression model has been developed which incorporates the mortality ratio as a function of age. This model is then applied to mortality data from an occupational cohort study. The nature of the occupational data necessitates the investigation of mortality ratios which increase with age. These occupational data are used primarily to illustrate and develop the statistical methodology.^ The age-specific mortality ratio (MR) for the covariates of interest can be written as MR(,ij...m) = ((mu)(,ij...m)/(theta)(,ij...m)) = r(.)exp (Z('')(,ij...m)(beta)) where (mu)(,ij...m) and (theta)(,ij...m) denote the force of mortality in the study and chosen standard populations in the ij...m('th) stratum, respectively, r is the intercept, Z(,ij...m) is the vector of covariables associated with the i('th) age interval, and (beta) is a vector of regression coefficients associated with these covariables. A Newton-Raphson iterative procedure has been used for determining the maximum likelihood estimates of the regression coefficients.^ This model provides a statistical method for a logical and easily interpretable explanation of an occupational cohort mortality experience. Since it gives a reasonable fit to the mortality data, it can also be concluded that the model is fairly realistic. The traditional statistical method for the analysis of occupational cohort mortality data is to present a summary index such as the SMR under the assumption of constant (homogeneous) age-specific mortality ratios. Since the mortality ratios for occupational groups usually increase with age, the homogeneity assumption of the age-specific mortality ratios is often untenable. The traditional method of comparing SMRs under the homogeneity assumption is a special case of this model, without age as a covariate.^ This model also provides a statistical technique to evaluate the relative risk between two SMRs or a dose-response relationship among several SMRs. The model presented has application in the medical, demographic and epidemiologic areas. The methods developed in this thesis are suitable for future analyses of mortality or morbidity data when the age-specific mortality/morbidity experience is a function of age or when there is an interaction effect between confounding variables needs to be evaluated. ^