140 resultados para Beers


Relevância:

10.00% 10.00%

Publicador:

Resumo:

Cu(II)/neocuproine (2,9-dimethyl-1,10-phenanthroline) complexes were utilized for spectrophotometric determination of total polyphenol content in beers. This procedure is based on the reduction of Cu(II) by polyphenols in hydroethanolic medium (pH 7.0) in the presence of neocuproine, yielding Cu(I)/complexes with maximum absorption at 454 nm. The sensitivity of the proposed method was compared with the AOAC method using tannic and gallic acid as standards. The average apparent molar absorptivity, in L cm(-1) mol(-1), of tannic acid (3.50 +/- 0.20) x 10(5) and gallic acid (5.12 +/- 0.21) x 10(4), was twice as high for the proposed method. A lower limit of detection (LOD) (2.9 x 10(-1) mg L-1) was found when tannic acid was used in the proposed method. Additionally, less interference from the most common additives in beers was noticed. Total content of polyphenols was analyzed in 17 Brazilian samples. Results ranged from 35.5 to 556 mg L-1 of tannic acid, with higher values for recovery rates (45.4-118%, mean 85.0%) than for gallic acid. Although tannic acid is a mixture of polygalloyl glucoses, the total polyphenol content found in the samples suggests that tannic acid should be used as a standard. This is the first attempt to use this particular copper complex to quantify total polyphenol content in beer samples. (C) 2012 Elsevier Inc. All rights reserved.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

We present a detailed study of carbon-enhanced metal-poor (CEMP) stars, based on high-resolution spectroscopic observations of a sample of 18 stars. The stellar spectra for this sample were obtained at the 4.2 m William Herschel Telescope in 2001 and 2002, using the Utrecht Echelle Spectrograph, at a resolving power R similar to 52 000 and S/N similar to 40, covering the wavelength range lambda lambda 3700-5700 angstrom. The atmospheric parameters determined for this sample indicate temperatures ranging from 4750 K to 7100 K, log g from 1.5 to 4.3, and metallicities -3.0 <= [Fe/H]<=-1.7. Elemental abundances for C, Na, Mg, Sc, Ti, Cr, Cu, Zn, Sr, Y, Zr, Ba, La, Ce, Nd, Sm, Eu, Gd, Dy are determined. Abundances for an additional 109 stars were taken from the literature and combined with the data of our sample. The literature sample reveals a lack of reliable abundance estimates for species that might be associated with the r-process elements for about 67% of CEMP stars, preventing a complete understanding of this class of stars, since [Ba/Eu] ratios are used to classify them. Although eight stars in our observed sample are also found in the literature sample, Eu abundances or limits are determined for four of these stars for the first time. From the observed correlations between C, Ba, and Eu, we argue that the CEMP-r/s class has the same astronomical origin as CEMP-s stars, highlighting the need for a more complete understanding of Eu production.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

OBJECTIVES: To determine the frequency of medical adverse events in elderly patients admitted to an acute care geriatric unit, the predictive factors of occurrence, and the correlation between adverse events and hospital mortality rates. METHODS: This prospective study included 171 admissions of patients aged 60 years and older in the acute care geriatric unit in a teaching hospital in Brazil between 2007 and 2008. The following variables were assessed at admission: the patient age, gender, number of prescription drugs, geriatric syndromes (e. g., immobility, postural instability, dementia, depression, delirium, and incontinence), comorbidities, functional status (evaluated with the Katz Index of Independence in Activities of Daily Living), and severity of illness (evaluated with the Simplified Acute Physiology Score II). The incidence of delirium, infection, mortality, and the prescription of potentially inappropriate medications (based on the Beers criteria) were assessed during hospitalization. An observer who was uninvolved in patient care reported the adverse events. RESULTS: The mean age of the sample was 78.12 years. A total of 187 medical adverse events occurred in 94 admissions (55%). The predictors of medical adverse events were undetermined. Compared with the patients with no adverse events, the patients with medical adverse events had a significantly longer hospital stay (21.41 +/- 15.08 days versus 10.91 +/- 7.21 days) and a higher mortality rate (39 deaths [41.5%] versus 17 deaths [22.1%]). Mortality was significantly predicted by the Simplified Acute Physiology Score II score (odds ratio [OR] = 1.13, confidence interval [CI] 95%, 1.07 to 1.20), the Katz score (OR = 1.47, CI 95%, 1.18 to 1.83), and medical adverse events (OR = 3.59, CI 95%, 1.55 to 8.30). CONCLUSION: Medical adverse events should be monitored in every elderly hospitalized patient because there is no risk profile for susceptible patients, and the consequences of adverse events are serious, sometimes leading to longer hospital stays or even death.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Diamant ist das härteste Mineral – und dazu ein Edelstein -, das unter höchstem Druck und hohen Temperaturen in tiefen kontinentalen Regionen der Erde kristallisiert. Die Mineraleinschlüsse in Diamanten werden durch die physikalische Stabilität und chemische Beständigkeit der umgebenden – eigentlich metastabilen -Diamant-Phase geschützt. Aufgrund der koexistierenden Phasenkombination ermöglichen sie, die Mineral-Entwicklung zu studieren, während deren der Einschlüssen und die Diamanten kristallisierten. rnDie Phasenkombinationen von Diamant und Chrom-Pyrop, Chrom-Diopsid, Chromit, Olivin, Graphit und Enstatit nebeneinander (teilweise in Berührungsexistenz) mit Chrom-Pyrop Einschlüssen wurden von neunundzwanzig Diamant-Proben von sechs Standorten in Südafrika (Premier, Koffiefontein, De Beers Pool, Finsch, Venetia und Koingnaas Minen) und Udachnaya (Sibirien/Russland) identifiziert und charakterisiert. Die Mineraleinschlüsse weisen z.T. kubo-oktaedrische Form auf, die unabhängig von ihren eigenen Kristallsystemen ausgebildet werden können. Das bedeutet, dass sie syngenetische Einschlüsse sind, die durch die sehr hohe Formenergie des umgebenden Diamanten morphologisch unter Zwang stehen. Aus zweidiemnsionalen Messungen der ersten Ordnung von charakteristischen Raman-Banden lassen sich relative Restdrucke in Diamanten zwischen Diamant und Einschlussmineral gewinnen; sie haben charakteristische Werte von ca. 0,4 bis 0,9 GPa um Chrom-Pyrop-Einschlüsse, 0,6 bis 2,0 GPa um Chrom-Diopsid-Einschlüsse, 0,3 bis 1,2 GPa um Olivin-Einschlüsse, 0,2 bis 1,0 GPa um Chromit-Einschlüsse, beziehungsweise 0,5 GPa um Graphit Einschlüsse.rnDie kristallstrukturellen Beziehung von Diamanten und ihren monomineralischen Einschlüssen wurden mit Hilfe der Quantifizierung der Winkelkorrelationen zwischen der [111] Richtung von Diamanten und spezifisch ausgewählten Richtungen ihrer mineralischen Einschlüsse untersucht. Die Winkelkorrelationen zwischen Diamant [111] und Chrom-Pyrop [111] oder Chromit [111] zeigen die kleinsten Verzerrungen von 2,2 bis zu 3,4. Die Chrom-Diopsid- und Olivin-Einschlüsse zeigen die Missorientierungswerte mit Diamant [111] bis zu 10,2 und 12,9 von Chrom-Diopsid [010] beziehungsweise Olivin [100].rnDie chemische Zusammensetzung von neun herausgearbeiteten (orientiertes Anschleifen) Einschlüssen (drei Chrom-Pyrop-Einschlüsse von Koffiefontein-, Finsch- und Venetia-Mine (zwei von drei koexistieren nebeneinander mit Enstatit), ein Chromit von Udachnaya (Sibirien/Russland), drei Chrom-Diopside von Koffiefontein, Koingnaas und Udachnaya (Sibirien/Russland) und zwei Olivin Einschlüsse von De Beers Pool und Koingnaas) wurden mit Hilfe EPMA und LA-ICP-MS analysiert. Auf der Grundlage der chemischen Zusammensetzung können die Mineraleinschlüsse in Diamanten in dieser Arbeit der peridotitischen Suite zugeordnet werden.rnDie Geothermobarometrie-Untersuchungen waren aufgrund der berührenden Koexistenz von Chrom-Pyrop- und Enstatit in einzelnen Diamanten möglich. Durchschnittliche Temperaturen und Drücke der Bildung sind mit ca. 1087 (± 15) C, 5,2 (± 0,1) GPa für Diamant DHK6.2 von der Koffiefontein Mine beziehungsweise ca. 1041 (± 5) C, 5,0 (± 0,1) GPa für Diamant DHF10.2 von der Finsch Mine zu interpretieren.rn

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Over the past 15 years the Italian brewing scene showed interesting changes, especially with regard to the creation of many breweries with an annual production of less than 10,000 hectoliters. The beers produced by microbreweries are very susceptible to attack by spoilage micro-organisms that cause the deterioration of beer quality characteristics. In addition, most of the microbreweries do not practice heat treatments of stabilization and do not carry out quality checks on the product. The high presence of beer spoilage bacteria is an economic problem for the brewing industry because it can damage the brand and it causes high costs of product retrieval. This thesis project was aimed to study the management of the production process in the Italian microbreweries within a production less than 10,000 hl. In particular, the annual production, type of plant, yeast management, process management, cleaning and sanitizing of a representative sample of microbreweries were investigated. Furthermore was made a collection of samples in order to identify, with simple methods, what are spoilage bacteria more present in the Italian craft beers. 21% of the beers analysed were positive at the presence of lactic acid bacteria. These analytical data show the importance of understanding what are the weak points of the production process that cause the development of spoilage bacteria. Finally, the thesis examined the actual production of two microbreweries in order to understand the process management that can promote the growth of spoilage bacteria in beer and production plant. The analysis of the data for the two case studies was helpful to understand what are the critical points where the microorganisms are most frequently in contact with the product. The hygiene practices are crucial to ensure the quality of the finished product, especially in the case of non-pasteurized beer.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Background: Medication-related problems are common in the growing population of older adults and inappropriate prescribing is a preventable risk factor. Explicit criteria such as the Beers criteria provide a valid instrument for describing the rate of inappropriate medication (IM) prescriptions among older adults. Objective: To reduce IM prescriptions based on explicit Beers criteria using a nurse-led intervention in a nursing-home (NH) setting. Study Design: The pre/post-design included IM assessment at study start (pre-intervention), a 4-month intervention period, IM assessment after the intervention period (post-intervention) and a further IM assessment at 1-year follow-up. Setting: 204-bed inpatient NH in Bern, Switzerland. Participants: NH residents aged ≥60 years. Intervention: The intervention included four key intervention elements: (i) adaptation of Beers criteria to the Swiss setting; (ii) IM identification; (iii) IM discontinuation; and (iv) staff training. Main Outcome Measure: IM prescription at study start, after the 4-month intervention period and at 1-year follow-up. Results: The mean±SD resident age was 80.3±8.8 years. Residents were prescribed a mean±SD 7.8±4.0 medications. The prescription rate of IMs decreased from 14.5% pre-intervention to 2.8% post-intervention (relative risk [RR] = 0.2; 95% CI 0.06, 0.5). The risk of IM prescription increased nonstatistically significantly in the 1-year follow-up period compared with post-intervention (RR = 1.6; 95% CI 0.5, 6.1). Conclusions: This intervention to reduce IM prescriptions based on explicit Beers criteria was feasible, easy to implement in an NH setting, and resulted in a substantial decrease in IMs. These results underscore the importance of involving nursing staff in the medication prescription process in a long-term care setting.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

OBJECTIVE: To determine whether treatment with spinal manipulative therapy (SMT) administered in addition to standard care is associated with clinically relevant early reductions in pain and analgesic consumption. METHODS: 104 patients with acute low back pain were randomly assigned to SMT in addition to standard care (n = 52) or standard care alone (n = 52). Standard care consisted of general advice and paracetamol, diclofenac or dihydrocodeine as required. Other analgesic drugs or non-pharmacological treatments were not allowed. Primary outcomes were pain intensity assessed on the 11-point box scale (BS-11) and analgesic use based on diclofenac equivalence doses during days 1-14. An extended follow-up was performed at 6 months. RESULTS: Pain reductions were similar in experimental and control groups, with the lower limit of the 95% CI excluding a relevant benefit of SMT (difference 0.5 on the BS-11, 95% CI -0.2 to 1.2, p = 0.13). Analgesic consumptions were also similar (difference -18 mg diclofenac equivalents, 95% CI -43 mg to 7 mg, p = 0.17), with small initial differences diminishing over time. There were no differences between groups in any of the secondary outcomes and stratified analyses provided no evidence for potential benefits of SMT in specific patient groups. The extended follow-up showed similar patterns. CONCLUSIONS: SMT is unlikely to result in relevant early pain reduction in patients with acute low back pain.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Surfactant protein D (SP-D) modulates the lung's immune system. Its absence leads to NOS2-independent alveolar lipoproteinosis and NOS2-dependent chronic inflammation, which is critical for early emphysematous remodeling. With aging, SP-D knockout mice develop an additional interstitial fibrotic component. We hypothesize that this age-related interstitial septal wall remodeling is mediated by NOS2. Using invasive pulmonary function testing such as the forced oscillation technique and quasistatic pressure-volume perturbation and design-based stereology, we compared 29-wk-old SP-D knockout (Sftpd(-/-)) mice, SP-D/NOS2 double-knockout (DiNOS) mice, and wild-type mice (WT). Structural changes, including alveolar epithelial surface area, distribution of septal wall thickness, and volumes of septal wall components (alveolar epithelium, interstitial tissue, and endothelium) were quantified. Twenty-nine-week-old Sftpd(-/-) mice had preserved lung mechanics at the organ level, whereas elastance was increased in DiNOS. Airspace enlargement and loss of surface area of alveolar epithelium coexist with increased septal wall thickness in Sftpd(-/-) mice. These changes were reduced in DiNOS, and compared with Sftpd(-/-) mice a decrease in volumes of interstitial tissue and alveolar epithelium was found. To understand the effects of lung pathology on measured lung mechanics, structural data were used to inform a computational model, simulating lung mechanics as a function of airspace derecruitment, septal wall destruction (loss of surface area), and septal wall thickening. In conclusion, NOS2 mediates remodeling of septal walls, resulting in deposition of interstitial tissue in Sftpd(-/-). Forward modeling linking structure and lung mechanics describes the complex mechanical properties by parenchymatous destruction (emphysema), interstitial remodeling (septal wall thickening), and altered recruitability of acinar airspaces.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

EGFRvIII is a mutant epidermal growth factor receptor found in glioblastoma, and in carcinoma of the breast, ovary, and lung. The mutant receptor has a deletion in its extracellular domain that results in the formation of a new, tumor-specific extracellular sequence. Mice were immunized with a synthetic peptide corresponding to this sequence and purified EGFRvIII. A single chain antibody variable domain (scFv) phage display library of 8 × 106 members was made from the spleen of one immunized mouse. A scFv specific for EGFRvIII was isolated from this library by panning with successively decreasing amounts of synthetic peptide. This was used to make an immunotoxin by fusing the scFv DNA sequence to sequences coding for domains II and III of Pseudomonas exotoxin A. Purified immunotoxin had a Kd of 22 nM for peptide and a Kd of 11 nM for cell-surface EGFRvIII. The immunotoxin was very cytotoxic to cells expressing EGFRvIII, with an IC50 of 1 ng/ml (16 pM) on mouse fibroblasts transfected with EGFRvIII and an IC50 of 7–10 ng/ml (110–160 pM) on transfected glioblastoma cells. There was no cytotoxic activity at 1000 ng/ml on the untransfected parent glioblastoma cell line. The immunotoxin was completely stable upon incubation at 37°C for 24 h in human serum. The combination of good affinity, cytotoxicity and stability make this immunotoxin a candidate for further preclinical evaluation.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

To determine whether proteasome activity is required for tracheary element (TE) differentiation, the proteasome inhibitors clasto-lactacystin β-lactone and carbobenzoxy-leucinyl-leucinyl-leucinal (LLL) were used in a zinnia (Zinnia elegans) mesophyll cell culture system. The addition of proteasome inhibitors at the time of culture initiation prevented differentiation otherwise detectable at 96 h. Inhibition of the proteasome at 48 h, after cellular commitment to differentiation, did not alter the final percentage of TEs compared with controls. However, proteasome inhibition at 48 h delayed the differentiation process by approximately 24 h, as indicated by examination of both morphological markers and the expression of putative autolytic proteases. These results indicate that proteasome function is required both for induction of TE differentiation and for progression of the TE program in committed cells. Treatment at 48 h with LLL but not clasto-lactacystin β-lactone resulted in partial uncoupling of autolysis from differentiation. Results from gel analysis of protease activity suggested that the observed incomplete autolysis was due to the ability of LLL to inhibit TE cysteine proteases.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

O Brasil ocupa o 3º lugar entre os maiores produtores mundiais de cerveja e o mercado consumidor vem aumentando progressivamente. Tendo em vista que o consumidor brasileiro está em busca de novos sabores e aromas para a cerveja, uma alternativa para a redução de custos explorando tais características reside no uso de adjuntos não convencionais que possam agregar valor à bebida, principalmente na obtenção de boas características sensoriais. Ainda, visando à sustentabilidade, estes adjuntos podem ser coprodutos do processamento de alimentos. O permeado concentrado de leite, um coproduto dos laticínios, é obtido através da ultrafiltração do leite, sendo composto por água, lactose e sais. Neste trabalho foi desenvolvido um processo para a produção de uma cerveja de alta fermentação (ale), utilizando o permeado concentrado de leite como adjunto de fabricação. Foram obtidas cervejas ale com a proporção malte/permeado de 55/45 e 90/10, utilizando para isso, permeado hidrolisado pela enzima ?-galactosidase e permeado não hidrolisado. A caracterização do permeado revelou que este possui três vezes mais lactose que o soro de queijo. A melhor condição de hidrólise enzimática da lactose presente no permeado foi obtida empregando-se 2,0 mL/L de ?-galactosidase em 90 minutos, alcançando 92,5% de hidrólise. Nas cervejas com permeado hidrolisado observou-se que a presença de galactose aumentou o tempo de fermentação para 168h e a atenuação real de fermentação dos mostos também foi maior em comparação as cervejas com permeado não hidrolisado, nos quais a lactose não foi fermentada. As cervejas 90/10 com permeado hidrolisado e não hidrolisado receberam as maiores notas na análise sensorial, tendo boa aceitação entre os provadores. Como não houve diferença estatística entre as duas, foi possível reduzir custo e tempo na produção da cerveja 90/10 em escala piloto (120L) por não ser necessário o processo de hidrólise enzimática. O permeado concentrado de leite mostrou-se um excelente adjunto na produção de cervejas ale e quando empregado em baixa concentração, produziu cervejas com boa aceitação sensorial.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Dealing with the environmental problems is one of the biggest challenges within the field of architectural technology. Solutions to this problem are mostly exclusively sought in materials and computer technology. However, far more attention should be paid to humans and their role in this problem. This paper presents a small part of our bachelor thesis, which started as an investigation on the Dutch terraced house and through research ended as a study on the human behaviour and motivation. The first part of this paper, the evolution, is focussed on the traditional way of problem solving. The second part, the revolution, is focussed on human behaviour and motivation. These two studies put together lead to our conclusion: The only way to structurally solve our environmental problem is to revolutionize our way of building by involving the human interaction into our solution instead of forcing it out.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This layer is a georeferenced raster image of the historic paper map entitled: Map of Lake George & vicinity : from recent and careful surveys, by F.W. Beers. It was published by J.B. Beers & Co., ca. 1876. Scale [1:79,200]. The image inside the map neatline is georeferenced to the surface of the earth and fit to the Universal Transverse Mercator (UTM) Zone 18N NAD83 projection. All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, index maps, legends, or other information associated with the principal map. This map shows features such as roads, railroads, drainage, post offices, hotels, township boundaries, and more. Relief is shown by hachures. This layer is part of a selection of digitally scanned and georeferenced historic maps from The Harvard Map Collection as part of the Imaging the Urban Environment project. Maps selected for this project represent major urban areas and cities of the world, at various time periods. These maps typically portray both natural and manmade features at a large scale. The selection represents a range of regions, originators, ground condition dates, scales, and purposes.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Countries in a monetary union can adjust to shocks either through internal or external mechanisms. We quantitatively assess for the European Union a number of relevant mechanisms suggested by Mundell’s optimal currency area theory, and compare them to the United States. For this purpose, we update a number of empirical analyses in the economic literature that identify (1) the size of asymmetries across countries and (2) the magnitude of insurance mechanisms relative to similar mechanisms and compare results for the European Monetary Union (EMU) with those obtained for the US. To study the level of synchronization between EMU countries we follow Alesina et al. (2002) and Barro and Tenreyro (2007). To measure the effect of an employment shock on employment levels, unemployment rates and participation rates we perform an analysis based on Blanchard and Katz (1992) and Decressin and Fatas (1995). We measure consumption smoothing through capital markets, fiscal transfers and savings, using the approach by Asdrubali et al. (1996) and Afonso and Furceri (2007). To analyze risk sharing through a common safety net for banks we perform a rudimentary simulation analysis. |

Relevância:

10.00% 10.00%

Publicador:

Resumo:

National Highway Traffic Safety Administration, Washington, D.C.