La reforma del sector público en Nueva Zelandia y su interés para los países en desarrollo

Incluye Bibliografía

Desempenho operacional de duas enfardadoras de fardos prismáticos retangulares no palhiço de cana-de-açúcar

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

O uso do ballet nos treinamentos de alto nível da ginástica rítmica

Entre as inúmeras definições da ginástica rítmica podemos apresentá-la como arte e como desporto. Como arte ela é conceituada como a busca do belo, uma explosão de talento e criatividade, em que a expressão corporal e o virtuosismo técnico se desenvolvem juntos, formando um conjunto harmonioso de movimento e ritmo. Como desporto ela é uma modalidade esportiva essencialmente feminina, que requer um alto nível de desenvolvimento de certas qualidades físicas, com exigências de rendimento elevadas, objetivando a perfeição técnica da execução de movimentos complexos com o corpo e com os aparelhos.

A interferência da ansiedade na performance de bailarinos

Não disponível

Perfil cinético do movimento pirouette do ballet clássico em bailarinas experientes e não experientes

A dança é uma das formas de expressão artística mais antiga da história da humanidade. O movimento da dança em foco no presente estudo foi a pirouette do ballet clássico. Tal movimento é caracterizado por um ou mais giros em torno do seu próprio eixo, executado sobre uma perna seja em meia ponta ou ponta completa, enquanto a outra está flexionada, com o pé abaixo do joelho da perna de apoio. O presente estudo consistiu em examinar o perfil cinético do movimento pirouette de bailarinas experientes e não experientes no Ballet Clássico. A hipótese é de que as variáveis relativas à força para produzir o giro influencie na realização do pirouette. As participantes do estudo foram convidadas a realizar o pirouette sobre uma plataforma de força. Os resultados do presente estudo demonstraram que as bailarinas experientes aplicam maior força para iniciar o giro em relação às participantes não experientes. Em conjunto, os resultados do presente estudo sugerem que a força vertical aplicada para iniciar o giro, a qual denominamos impulso inicial, parece ser determinante para a boa performance no movimento pirouette da bailarina. Os resultados do presente estudo oferece uma importante contribuição aos técnicos e professores de dança de forma a valorizar questões de controle motor e postural no processo ensino-aprendizagem do pirouette

Passé: balé bauruense em um ato e nove cenas

O projeto experimental Passé: balé bauruense em um ato e nove cenas é um livro-reportagem de perfis de pessoas que moram em Bauru e são ligadas ao balé clássico. Os entrevistados escolhidos pertencem a três gerações: são três idosas, três adultas e três jovens. Entre os nove perfilados, estão bailarinos e professores de balé clássico. O objetivo do projeto é resgatar, através da história oral de vida, e registrar, através do Jornalismo Literário, fragmentos da história da dança bauruense, pouco documentada, e retratar a paixão que as pessoas ligadas ao balé clássico sentem pela dança

Titanate-based paraelectric glass-ceramics for applications in GHz electronics

Das Gebiet der drahtlosen Kommunikationsanwendungen befindet sich in einem permanenten Entwicklungsprozess (Mobilfunkstandards: GSM/UMTS/LTE/5G, glo-bale Navigationssatellitensysteme (GNSS): GPS, GLONASS, Galileo, Beidou) zu immer höheren Datenraten und zunehmender Miniaturisierung, woraus ein hoher Bedarf für neue, optimierte Hochfrequenzmaterialien resultiert. Diese Entwicklung zeigt sich besonders in den letzten Jahren in der zunehmenden Entwicklung und Anzahl von Smartphones, welche verschiedene Technologien mit unterschiedlichen Arbeitsfrequenzen innerhalb eines Geräts kombinieren (data: 1G-4G, GPS, WLAN, Bluetooth). Die für zukünftige Technologien (z.B. 5G) benötigte Performance-steigerung kann durch die Verwendung von auf MIMO basierenden Antennensystemen realisiert werden (multiple-input & multiple-output, gesteuerte Kombination von mehreren Antennen) für welche auf dielectric Loading basierende Technologien als eine der vielversprechendsten Implementierungslösungen angesehen werden. rnDas Ziel dieser Arbeit war die Entwicklung einer geeigneten paraelektrischen Glaskeramik ($varepsilon_{r}$ > 20, $Qf$ > 5000 GHz, |$tau_f$| < 20 ppm/K; im GHz Frequenzbe-reich) im $mathrm{La_{2}O_{3}}$-$mathrm{TiO_{2}}$-$mathrm{SiO_{2}}$-$mathrm{B_{2}O_{3}}$-System für auf dielectric Loading basierende Mobilfunkkommunikationstechnologien als Alternative zu existierenden kommerziell genutzten Sinterkeramiken. Der Fokus lag hierbei auf der Frage, wie die makroskopi-schen dielektrischen Eigenschaften der Glaskeramik mit ihrer Mikrostruktur korreliert bzw. modifiziert werden können. Es konnte gezeigt werden, dass die dielektrischen Materialanforderungen durch das untersuchte System erfüllt werden und dass auf Glaskeramik basierende Dielektrika weitere vorteilhafte nichtelektro-nische Eigenschaften gegenüber gesinterten Keramiken besitzen, womit dielektrische Glaskeramiken durchaus als geeignete Alternative angesehen werden können. rnEin stabiles Grünglas mit minimalen Glasbildneranteil wurde entwickelt und die chemische Zusammensetzung bezüglich Entglasung und Redoxinstabilitäten optimiert. Geeignete Dotierungen für dielektrisch verlustarme $mathrm{TiO_{2}}$-haltige Glaskeramiken wurden identifiziert.rnDer Einfluss der Schmelzbedingungen auf die Keimbildung wurde untersucht und der Keramisierungsprozess auf einen maximalen Anteil der gewünschten Kristallphasen optimiert um optimale dielektrische Eigenschaften zu erhalten. Die mikroskopische Struktur der Glaskeramiken wurde analysiert und ihr Einfluss auf die makroskopischen dielektrischen Eigenschaften bestimmt. Die Hochfrequenzverlustmechanismen wurden untersucht und Antennen-Prototypenserien wurden analysiert um die Eignung von auf Glaskeramik basierenden Dielektrika für die Verwendung in dielectric Loading Anwendungen zu zeigen.

Clinical aspects, diagnostic challenges and management of patients with neuroendocrine tumors (NETs)

Neuroendocrine tumor (NET) entities are rare malignancies. Higher awareness and improved diagnostic methods have led to an increasing incidence of these diseases, and most oncologists deal with such patients in their daily practice. The symposium on NETs that was held in Merano (Italy) in October 2009 was organized by the German-speaking European School of Oncology (dESO) and gathered specialists from different disciplines of transalpine countries to bring together experiences and observations regarding these tumors. The goal of the meeting and of this review was to illustrate both well- and poorly differentiated NETs and to encourage interdisciplinary approaches.

Prediction of soil organic carbon for Ethiopian highlands using soil spectroscopy

Soil spectroscopy was applied for predicting soil organic carbon (SOC) in the highlands of Ethiopia. Soil samples were acquired from Ethiopia’s National Soil Testing Centre and direct field sampling. The reflectance of samples was measured using a FieldSpec 3 diffuse reflectance spectrometer. Outliers and sample relation were evaluated using principal component analysis (PCA) and models were developed through partial least square regression (PLSR). For nine watersheds sampled, 20% of the samples were set aside to test prediction and 80% were used to develop calibration models. Depending on the number of samples per watershed, cross validation or independent validation were used.The stability of models was evaluated using coefficient of determination (R2), root mean square error (RMSE), and the ratio performance deviation (RPD). The R2 (%), RMSE (%), and RPD, respectively, for validation were Anjeni (88, 0.44, 3.05), Bale (86, 0.52, 2.7), Basketo (89, 0.57, 3.0), Benishangul (91, 0.30, 3.4), Kersa (82, 0.44, 2.4), Kola tembien (75, 0.44, 1.9),Maybar (84. 0.57, 2.5),Megech (85, 0.15, 2.6), andWondoGenet (86, 0.52, 2.7) indicating that themodels were stable. Models performed better for areas with high SOC values than areas with lower SOC values. Overall, soil spectroscopy performance ranged from very good to good.

Comparison of freehand-navigated and aiming device-navigated targeting of liver lesions

BACKGROUND Accurate needle placement is crucial for the success of percutaneous radiological needle interventions. We compared three guiding methods using an optical-based navigation system: freehand, using a stereotactic aiming device and active depth control, and using a stereotactic aiming device and passive depth control. METHODS For each method, 25 punctures were performed on a non-rigid phantom. Five 1 mm metal screws were used as targets. Time requirements were recorded, and target positioning errors (TPE) were measured on control scans as the distance between needle tip and target. RESULTS Time requirements were reduced using the aiming device and passive depth control. The Euclidian TPE was similar for each method (4.6 ± 1.2-4.9 ± 1.7 mm). However, the lateral component was significantly lower when an aiming device was used (2.3 ± 1.3-2.8 ± 1.6 mm with an aiming device vs 4.2 ± 2.0 mm without). DISCUSSION Using an aiming device may increase the lateral accuracy of navigated needle insertion.

Cone-beam computed tomography-guided stereotactic liver punctures: a phantom study

PURPOSE Images from computed tomography (CT), combined with navigation systems, improve the outcomes of local thermal therapies that are dependent on accurate probe placement. Although the usage of CT is desired, its availability for time-consuming radiological interventions is limited. Alternatively, three-dimensional images from C-arm cone-beam CT (CBCT) can be used. The goal of this study was to evaluate the accuracy of navigated CBCT-guided needle punctures, controlled with CT scans. METHODS Five series of five navigated punctures were performed on a nonrigid phantom using a liver specific navigation system and CBCT volumetric dataset for planning and navigation. To mimic targets, five titanium screws were fixed to the phantom. Target positioning accuracy (TPECBCT) was computed from control CT scans and divided into lateral and longitudinal components. Additionally, CBCT-CT guidance accuracy was deducted by performing CBCT-to-CT image coregistration and measuring TPECBCT-CT from fused datasets. Image coregistration was evaluated using fiducial registration error (FRECBCT-CT) and target registration error (TRECBCT-CT). RESULTS Positioning accuracies in lateral directions pertaining to CBCT (TPECBCT = 2.1 ± 1.0 mm) were found to be better to those achieved from previous study using CT (TPECT = 2.3 ± 1.3 mm). Image coregistration error was 0.3 ± 0.1 mm, resulting in an average TRE of 2.1 ± 0.7 mm (N = 5 targets) and average Euclidean TPECBCT-CT of 3.1 ± 1.3 mm. CONCLUSIONS Stereotactic needle punctures might be planned and performed on volumetric CBCT images and controlled with multidetector CT with positioning accuracy higher or similar to those performed using CT scanners.

Angiographic C-arm CT- versus MDCT-guided stereotactic punctures of liver lesions: nonrigid phantom study

OBJECTIVE Angiographic C-arm CT may allow performing percutaneous stereotactic tumor ablations in the interventional radiology suite. Our purpose was to evaluate the accuracy of using C-arm CT for single and multimodality image fusions and to compare the targeting accuracy of liver lesions with the reference standard of MDCT. MATERIALS AND METHODS C-arm CT and MDCT scans were obtained of a nonrigid rapid prototyping liver phantom containing five 1-mm targets that were placed under skin-simulating deformable plastic foam. Target registration errors of image fusion were evaluated for single-modality and multimodality image fusions. A navigation system and stereotactic aiming device were used to evaluate target positioning errors on postinterventional scans with the needles in place fused with the C-arm CT or MDCT planning images. RESULTS Target registration error of the image fusion showed no significant difference (p > 0.05) between both modalities. In five series with a total of 25 punctures for each modality, the lateral target positioning error (i.e., the lateral distance between the needle tip and the planned trajectory) was similar for C-arm CT (mean [± SD], 1.6 ± 0.6 mm) and MDCT (1.82 ± .97 mm) (p = 0.33). CONCLUSION In a nonrigid liver phantom, angiographic C-arm CT may provide similar image fusion accuracy for comparison of intra- and postprocedure control images with the planning images and enables stereotactic targeting accuracy similar to that of MDCT.

British-Israelism examined : a point-by-point examination of the British-Israel position

by Samuel Hinds Wilkinson

Mutations in SLC1A4, encoding the brain serine transporter, are associated with developmental delay, microcephaly and hypomyelination

BACKGROUND L-serine plays an essential role in neuronal development and function. Although a non-essential amino acid, L-serine must be synthesised within the brain because of its poor permeability by the blood-brain barrier. Within the brain, its synthesis is confined to astrocytes, and its shuttle to neuronal cells is performed by a dedicated neutral amino acid transporter, ASCT1. METHODS AND RESULTS Using exome analysis we identified the recessive mutations, p.E256K, p.L315fs, and p.R457W, in SLC1A4, the gene encoding ASCT1, in patients with developmental delay, microcephaly and hypomyelination; seizure disorder was variably present. When expressed in a heterologous system, the mutations did not affect the protein level at the plasma membrane but abolished or markedly reduced L-serine transport for p.R457W and p.E256K mutations, respectively. Interestingly, p.E256K mutation displayed a lower L-serine and alanine affinity but the same substrate selectivity as wild-type ASCT1. CONCLUSIONS The clinical phenotype of ASCT1 deficiency is reminiscent of defects in L-serine biosynthesis. The data underscore that ASCT1 is essential in brain serine transport. The SLC1A4 p.E256K mutation has a carrier frequency of 0.7% in the Ashkenazi-Jewish population and should be added to the carrier screening panel in this community.

Paleoglaciated landscapes in Simen and other high-mountain areas of Ethiopia

In the present-day Ethiopia, glaciated landscapes do not exist, but paleoglaciated landscapes have been documented on a few mountain tops, which have altitudes higher than about 4,350 m asl in northern Ethiopia (Simen Mountains) and about 4,100 m asl in southern Ethiopia (Arsi and Bale Mountains). Glaciers were associated with the Late Pleistocene cold stages and reached as far down as 3,760 m asl in northern and 3,200 m asl in southern Ethiopia. Bale Mountains had the most extensive Late Pleistocene glaciation, covering over 190 km2, followed by Arsi Mountains (about 85 km2). In Simen, the Late Pleistocene glaciers covered merely 13 km2. In addition, paleo-periglacial slope deposits are found on all above-mentioned paleoglaciated mountains and in further mountain systems which did not host glaciers. This allows the reconstruction of the Late Pleistocene paleoclimate as being about 8 °C colder than at present (2014), much more dry, and probably without monsoon, at least in northern Ethiopia. Most probably in the Early Holocene, the re-emergence of monsoonal rains led to a strong erosion phase, which was followed by an extended stable phase with soil formation, building up about 70-cm-deep A-horizons (Andosol) on the paleo-periglacial slope deposits. These soils have been heavily degraded due to human-induced soil erosion up to about 3800 m asl since agriculture started several decades to millennia ago.