Avaliação de diferentes tipos de atmosferas modificadas na vida útil de carambolas minimamente processadas

Este trabalho teve por objetivo a avaliação da vida útil potencial de carambolas cv. Golden Star, minimamente processadas, armazenadas em diferentes tipos de embalagens plásticas, para a concepção da atmosfera modificada. Os frutos colhidos fisiologicamente maturos apresentaram coloração verde-amarelada, sólidos solúveis (SS) médios de 6,8 ºBrix e massa média de 185 g. Antes da aplicação dos tratamentos, os frutos foram selecionados, higienizados em solução de hipoclorito de sódio (NaOCl) a 100 mg. L-1, resfriados por 12 horas a 15 ± 0,5 °C, seccionados transversalmente, sendo então novamente higienizados em solução de NaOCl a 10 mg.L-1, por 3 minutos. em seguida, os pedaços em forma de estrelas foram acondicionados em bandejas rígidas de poliestireno, com capacidade para 250 g, e revestidas com os seguintes materiais: T1: filme plástico perfurado de polietileno de baixa densidade (PEBD), de 0,006 mm; T2: filme plástico poliolefínico com antiembassamento da Dupont® (AGF), de 0,015 mm; T3: filme plástico poliolefínico da Dupont® (HF), de 0,015 mm; T4: filme plástico de PEBD, de 60 µm; T5: filme plástico de PEBD, de 80 µm; T6: filme plástico de polipropileno (PP), de 22 µm, e T7: bandeja rígida de polietileno tereftalato (PET), com capacidade para 500 mL, com tampa do mesmo material. As embalagens foram então armazenadas em câmara frigorífica a 12 ± 0,5 °C e 90 ± 3% de U.R, por 18 dias. Observou-se que não houve diferença significativa quanto aos sólidos solúveis (SS) e acidez titulável (AT). O maior número de microrganismos e valor de pH foram observados nos frutos embalados nos filmes plásticos de PEBD de 0,006 mm, AGF e HF de 0,015 mm da Dupont®. Entretanto, os frutos acondicionados nas embalagens PET apresentaram o maior teor de ácido ascórbico. da mesma forma, somente nas embalagens PET é que se conseguiu modificação atmosférica eficiente do ponto de vista da manutenção dos atributos de qualidade durante o AR. Assim, esse tratamento proporcionou adequado controle microbiológico e manutenção das características de qualidade por 18 dias para as carambolas minimamente processadas.

Caracterização físico-química, bioquímica e funcional da jabuticaba armazenada sob diferentes temperaturas

O presente trabalho teve como objetivo avaliar a qualidade pós-colheita de jabuticabas submetidas a diferentes temperaturas de armazenamento refrigerado (AR). Após a colheita, os frutos fisiologicamente maduros foram acondicionados em bandejas de poliestireno expandido (EPS), revestidas por filme plástico de polietileno de baixa densidade (PEBD) e armazenados sob refrigeração a 0; 3; 6; 9 e 12 ± 1ºC e U.R. 87 ± 2%, sendo avaliados a cada 5 dias. Os frutos foram avaliados quanto à perda de massa, atividade respiratória, pH, acidez titulável, sólidos solúveis, ácido ascórbico, textura, pectina total e solúvel, atividade da enzima polifenoloxidase (PFO), compostos fenólicos e atividade antioxidante. Para frutos refrigerados a 9 e 12ºC, o pico respiratório atrasou em relação aos demais tratamentos, além de apresentarem as menores taxas respiratórias. O teor de sólidos solúveis aumentou com o tempo de armazenamento para todas as temperaturas, contudo, em 9 e 12ºC, esse aumento foi em menor proporção. A firmeza e o teor de ácido ascórbico também foram superiores nos frutos armazenados a 9 e 12ºC, enquanto os contéudos de pectina solúvel foram menores. Observou-se a diminuição da atividade da enzima PFO ao longo dos 30 dias do AR, independentemente da temperatura utilizada; entretanto, os menores valores foram encontrados nos frutos mantidos a 9 e 12ºC. Os frutos armazenados a 12ºC apresentaram os maiores conteúdos de compostos fenólicos totais e a maior atividade antioxidante ao final do experimento. Nesse sentido, a temperatura de 12ºC foi a mais efetiva na manutenção da qualidade pós-colheita das jabuticabas.

Firmeza de caqui 'Giombo' submetido à aplicação pós-colheita de cloreto de cálcio

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Radiação gama e atmosfera modificada passiva na qualidade de goiabas 'Pedro Sato'

O objetivo deste trabalho foi avaliar o efeito da irradiação gama associada à atmosfera modificada passiva na qualidade pós-colheita de goiabas 'Pedro Sato', verificando suas características físico-químicas. Foram utilizadas goiabas provenientes da região de Vista Alegre do Alto-SP,Brasil. Após a colheita, as goiabas foram imediatamente transportadas ao Laboratório de Frutas e Hortaliças, pertencente ao Departamento de Gestão e Tecnologia Agroindustrial, da Faculdade de Ciências Agronômicas - UNESP - Câmpus de Botucatu-SP, onde foram armazenadas a 10ºC e 90-95%UR, em câmara frigorífica, por 28 dias. Os tratamentos foram: controle 1 (sem embalagem e sem irradiação); controle 2 (embalagem de poliestireno (PS) + polietileno de baixa densidade (PEBD) e sem irradiação); tratamento 1 (PS+PEBD e 0,2kGy); tratamento 2 (PS+PEBD e 0,6kGy), e tratamento 3 (PS+PEBD e 1,0kGy). As análises realizadas foram: firmeza, sólidos solúveis (SS), acidez titulável (AT) e índice de maturação. Foi utilizado o delineamento inteiramente casualizado, com esquema fatorial 5 x 5 (tratamento x tempo). Concluiu-se que as altas doses de irradiação promoveram efeito negativo nas características físico-químicas da goiaba 'Pedro Sato', e que apenas a menor dose utilizada (0,2kGy) associada à atmosfera modificada conservou frutos com maior qualidade e aceitabilidade, indicado por maiores índice de maturação e teor de sólidos solúveis obtidos.

Qualidade pós-colheita de mangas, não-refrigeradas, e submetidas ao controle da ação do etileno

O presente trabalho objetivou-se na caracterização físico-química de mangas cv. Tommy Atkins e Haden, submetidas ao controle da ação do etileno, através da exposição dos frutos à ação de adsorvedores de etileno. Os frutos colhidos em estádio de fisiologicamente maturos foram embalados em filmes de polietileno de baixa densidade (PEBD) de 0,006 mm de espessura, com ou sem o sachê de adsorção de etileno, e acondicionados em embalagens de papelão (0,65 x 0,52 m), sem o controle da temperatura e da umidade relativa (30 ± 3 ºC e 70 ± 5 % de U.R.). Os tratamentos ficaram constituídos dessa maneira: T1 - mangas cv. Tommy Atkins, com o sachê de adsorção; T2 - mangas cv. Tommy Atkins, sem o sachê de adsorção; T3- mangas cv. Haden com o sachê de adsorção, e T4 - mangas cv Haden sem o sachê de adsorção. As análises de firmeza de polpa, sólidos solúveis (SS), acidez titulável (AT), pH, ácido ascórbico e concentração de etileno foram realizadas na instalação do experimento (dia 0), e aos 7; 14; 21; 28 e 35 dias; e aos 35 dias foi realizado um teste de preferência. Ao final do experimento, observou-se que, em ambas as cultivares, a menor concentração de etileno nas embalagens, a maior firmeza de polpa, a maior contenção no avanço e na diminuição do SS e AT, respectivamente, bem como a melhor manutenção do conteúdo de ácido ascórbico foram detectadas nos frutos acondicionados em embalagens contendo o sachê de adsorção de etileno. Não foram detectadas variações significativas nos valores de pH. No teste de preferência, houve variação significativa, onde os frutos acondicionados sob ação do adsorvedor de etileno foram preferidos por parte dos julgadores.

Uso de malhas pigmentadas e mulching em túneis para cultivo de rúcula: efeito no ambiente e nas plantas modelo

O uso de malhas pigmentadas em cultivos de hortaliças folhosas permite a melhor adequação do ambiente às plantas, com destaque para a rúcula. Essa hortaliça vem conquistando maior espaço no mercado consumidor brasileiro desde o final da década de 90. Essa pesquisa teve por objetivo avaliar as condições ambientais proporcionadas pelo uso de telas pigmentadas na cobertura de túneis de cultivo, relacionando com as respostas agronômicas da rúcula, cultivada dentro desses túneis sobre diferentes coberturas de solo. As coberturas de túneis foram: a Chromatinet® azul, Chromatinet® vermelha, tela aluminizada prata, Sombrite® 50% e filme plástico transparente de polietileno de baixa densidade de 100µ. As coberturas de solo, também denominadas mulchings, dentro dos túneis foram: o filme plástico de polietileno de cor preta; de polietileno de dupla-face nas cores preta e branca, com a face branca voltada para cima; casca de arroz e a ausência de mulching. O delineamento utilizado foi o de blocos ao acaso com 24 tratamentos e três repetições. Nas condições do experimento, o emprego de algumas coberturas de túnel e de solo modificou o ambiente e melhorou as respostas agronômicas das plantas de rúcula.

Adição de geomanta e tecido não tecido de polipropileno em cimentos geopoliméricos de pega rápida

Geopolymers are cementing materials that depict a number of advantages compared to Portland cement. Contrary to the latter, geopolymers are synthesized at room temperature, thus significantly reducing the emission of CO2 to the atmosphere. Moreover, the composition and synthesis reactions can be tailored to adjust the setting time of the material as well as its compressive mechanical strength. It is then possible to produce geopolymeric cements with short setting times and high compressive strength, although relatively brittle. The objective of the present study was to produce and characterize composite materials by reinforcing fastsetting geopolymeric matrixes with polypropylene geosynthetics (geomats and geotextiles) in an attempt to improve the toughness and tensile strength of the cementing material. Geosynthetics have been increasingly used to reinforce engineering structures, providing higher strength and better toughness. In particular, polypropylene nonwoven and geomats depict other attractive properties such as low density, durability, impact absorption and resistance to abrasion. Fast-setting geopolymers were then synthesized and reinforced with polypropylene nonwoven and geomats. The mechanical strength of the materials, reinforced or not, was characterized. The results showed that relatively short setting times and adequate flowing behavior were achieved by adjusting the composition of the geopolymer. In addition, it is possible to improve the fracture resistance of geopolymeric cements by adding polypropylene geosynthetics. The best results were achieved by reinforcing geopolymer with polypropylene TNT

Compósitos híbridos: desenvolvimento de configuração e efeitos de umidificação

The advantage in using vegetable fibres in place of synthetic fibres such as glass fibre, for reinforcements in composites are: biodegradability, low cost, low density, good tenacity, good thermal properties, low energy content and reduced use of instruments for its treatment or processing. Even though, problems related to low mechanical performance of some of the natural fibres, has caused difficulty in their direct application in structural elements. The use of alternative materials like hybrid composites has been encouraged, thus trying to better the structural performance of the composites with natural fibres. This work presents a comparative study of the strength and stiffness of hybrid composites with orthopthalic polyester matrix reinforced with E-fibre glass, jute and curauá. The experimental part includes uniaxial tension and three point bending tests to determine the mechanical properties of the final product. The hybrid composite was manufactured in a local industry and was in the form of laminates. All the samples were projected to withstand the possible structural applications as reservoirs and pipes. CH (laminated hybrid composite with glass and curauá fibres). The results obtained show clearly the influence of the hybridization in all the types tested and indicate a good mechanical performance of the composite with glass/curauá fibres in relation to the composite with glass fibres. Aspects in relation to the interfaces glass/curauá composites besides the fracture characteristics for all loading types were also analysed

Efeitos do envelhecimento ambiental acelerado em compósitos poliméricos

The advantages of the use of vegetable fibers on the synthetic fibers, such as glass fibers, in the reinforcements in composites are: low cost, low density, good tenacity, good thermal properties and reduced use of instruments for their treatment or processing. However, problems related to poor performance of some mechanical natural fibers, have hindered its direct use in structural elements. In this sense, the emergence of alternative materials such as hybrids composites, involving natural and synthetic fibers, has been encouraged by seeking to improve the performance of structural composites based only on natural fibers. The differences between the physical, chemical and mechanical properties of these fibers, especially facing the adverse environmental conditions such as the presence of moisture and ultraviolet radiation, is also becoming a concern in the final response of these composites. This piece of research presents a comparative study of the strength and stiffness between two composite, both of ortoftalic polyester matrix, one reinforced with fibers of glass-E (CV) and other hybrid reinforced with natural fibers of curauá and fiberglass-E (CH). All the comparative study is based on the influence of exposure to UV rays and steam heated water in composites, simulating the aging environment. The conditions for the tests are accelerated through the use of the aging chamber. The composites will be evaluated through tests of uniaxial static mechanical traction and bending on three points. The composite of glass fiber and hybrid manufacturing industry are using the rolling manual (hand lay-up) and have been developed in the form of composites. All were designed to meet possible structural applications such as tanks and pipes. The reinforcements used in composites were in the forms of short fiber glass-E quilts (450g/m2 - 5cm) of continuous wires and fuses (whose title was of 0.9 dtex) for the curauá fibers. The results clearly show the influence of aging on the environmental mechanical performance of the composite CV and CH. The issues concerning the final characteristics of the fracture for all types of cargoes studied were also analyzed

Caracterização de escovas de grafite e avaliação do seu desempenho em função da microestrutura

The electric can be converted into thermal, luminous, electromagnetic, and also in mechanical energy. In this context the electric engines plays a fundamental role, specially that they work very below of its nominal capacity, with consequent decrease load density. In industrial environment, these characteristics of work of DC engines had also generated an extreme consumption of coal brushs and attack in the commutator reducing the useful life of the engine and increasing maintenance demand and cost. The general objective of the present work is to study the influence of the granulometry of the coal brush used in DC engines with the resistance to the consumption of the same ones, as well as in the performance presented by the commutator of the engine. Additionally, determining the measurable and not measurable profits when the brush used is adjusted to the application. The brushes had been produced by an industry of the sector and tested in industrial environment to evaluate their performance and consumption. Preliminary results evidence a substantial improvement in the performance of these brushes in function of its microstructure and the application in which it is used

Biomecânica e otimização topológica com H-adaptatividade em implantes dentários nitretados a plasma em cátodo oco

In recent years there has been a significant growth in technologies that modify implant surfaces, reducing healing time and allowing their successful use in areas with low bone density. One of the most widely used techniques is plasma nitration, applied with excellent results in titanium and its alloys, with greater frequency in the manufacture of hip, ankle and shoulder implants. However, its use in dental implants is very limited due to high process temperatures (between 700 C o and 800 C o ), resulting in distortions in these geometrically complex and highly precise components. The aim of the present study is to assess osseointegration and mechanical strength of grade II nitrided titanium samples, through configuration of hollow cathode discharge. Moreover, new formulations are proposed to determine the optimum structural topology of the dental implant under study, in order to perfect its shape, make it efficient, competitive and with high definition. In the nitriding process, the samples were treated at a temperature of 450 C o and pressure of 150 Pa , during 1 hour of treatment. This condition was selected because it obtains the best wettability results in previous studies, where different pressure, temperature and time conditions were systematized. The samples were characterized by X-ray diffraction, scanning electron microscope, roughness, microhardness and wettability. Biomechanical fatigue tests were then conducted. Finally, a formulation using the three dimensional structural topology optimization method was proposed, in conjunction with an hadaptive refinement process. The results showed that plasma nitriding, using the hollow cathode discharge technique, caused changes in the surface texture of test specimens, increases surface roughness, wettability and microhardness when compared to the untreated sample. In the biomechanical fatigue test, the treated implant showed no flaws, after five million cycles, at a maximum fatigue load of 84.46 N. The results of the topological optimization process showed well-defined optimized layouts of the dental implant, with a clear distribution of material and a defined edge

Desenvolvimento de sistemas de pastas leves para aplicação em cimentação de poços petrolíferos com baixo gradiente de fratura

All around the world, naturally occurring hydrocarbon deposits, consisting of oil and gas contained within rocks called reservoir rocks , generally sandstone or carbonate exists. These deposits are in varying conditions of pressure and depth from a few hundred to several thousand meters. In general, shallow reservoirs have greater tendency to fracture, since they have low fracture gradient, ie fractures are formed even with relatively low hydrostatic columns of fluid. These low fracture gradient areas are particularly common in onshore areas, like the Rio Grande do Norte basin. During a well drilling, one of the most favorable phases for the occurrence of fractures is during cementing, since the cement slurry used can have greater densities than the maximum allowed by the rock structure. Furthermore, in areas which are already naturally fractured, the use of regular cement slurries causes fluid loss into the formation, which may give rise to failures cementations and formation damages. Commercially, there are alternatives to the development of lightweight cement slurries, but these fail either because of their enormous cost, or because the cement properties were not good enough for most general applications, being restricted to each transaction for which the cement paste was made, or both reasons. In this work a statistical design was made to determine the influence of three variables, defined as the calcium chloride concentration, vermiculite concentration and nanosilica concentration in the various properties of the cement. The use of vermiculite, a low density ore present in large amounts in northeastern Brazil, as extensor for cementing slurries, enabled the production of stable cements, with high water/cement ratio, excellent rheological properties and low densities, which were set at 12.5 lb / gal, despite the fact that lower densities could be achieved. It is also seen that the calcium chloride is very useful as gelling and thickening agent, and their use in combination with nanosilica has a great effect on gel strength of the cement. Hydrothermal Stability studies showed that the pastes were stable in these conditions, and mechanical resistance tests showed values of the order of up to 10 MPa

Avaliação do comportamento em fadiga de juntas estruturais de ligas de Al2024T3 coladas com adesivo epóxi

Ligas de alumínio são extensamente usadas em partes aeronáuticas devido às boas propriedades mecânicas e baixa densidade. Estas partes devem ser unidas para formar conjuntos maiores. Uma junta estrutural é definida como um segmento de estrutura que provê um meio de transferir carga de um elemento estrutural para outro. A maioria das juntas aeronáuticas é mecanicamente fixada com múltiplos prendedores (parafusos ou rebites). Estas juntas apresentam uma alta concentração de tensões ao redor do prendedor, porque a transferência de carga entre elementos da junta acontece em uma fração da área disponível. Por outro lado, as cargas aplicadas em juntas adesivas são distribuídas sobre toda a área colada e reduz os pontos de concentração de tensão. Juntas são a fonte mais comum de falhas estruturais em aeronaves e quase todos os reparos envolvem juntas. Portanto, é importante entender todos os aspectos de projeto e análise de juntas. O objetivo deste trabalho é comparar estaticamente juntas estruturais de ligas de Al2024-T3 em três condições: juntas mecanicamente rebitadas, juntas coladas e uma configuração híbrida rebitada e colada. Foi usada a norma NASM 1312-4 para confecção dos corpos-de-prova. Além disso, foram conduzidos testes de fadiga, sob amplitude de carregamento constante e razão de tensão igual a 0,1 para avaliar a eficiência dos elementos estruturais durante sua vida em serviço. Os resultados mostraram que a configuração híbrida apresenta maior resistência estática e uma vida em fadiga superior à configuração colada.

Síntese e caracterização de redes metalorgânicas baseadas em zinco e ácidos benzenodicarboxílicos

Metal Organic Frameworks (MOFs) are supramolecular structures consisted of ions or metal clusters coordinated to organic ligands which are repeated in two or three dimensions. These structures have atracted much attention due to their properties such as low density, high specific surface area and large volume of pores. In this work, MOFs consisted of zinc clusters connected by ditopic ligands, terephthalic acid (1,4- H2BDC) or isophthalic acid (1,3-H2BDC) were synthesized. To obtain the proposed materials, different routes and synthetic parameters were tested, such as the molar ratio of the precursors, the addition of template molecules, the type of solvente, the addition of organic base or the type of a counter-ion of Zn salt. It was found that the variation of these parameters led to the formation of different metalorganic structures. The solids obtained were characterized by XRD, SEM and IR. For the samples identified as MOF- 5, it was verified that the structure was composed of both interpenetrated and non interpenetrated structures. These samples showed a low stability, becoming totally transformed into another structure within less than 72 hours. The addition of the nickel and/or cobalt was found to be a promissing method for increasing the stability of MOF- 5, which in this case, still remained unconverted to another structure even after 15 days of exposure to air. The samples prepared from 1,3-H2BDC were probably new, still unknown Metal Organic Frameworks

Reciclagem química de Polietileno utilizando Sílica Mesoporosa tipo SBA-15 avalizada por Termogravimetriae Espectrometria de Massas

The chemical recycling of polyolefins has been the focus of increasing attention owing potential application as a fuel and as source chemicals. The use of plastic waste contributes to the solution of pollution problems.The use of catalysts can enhance the thermal degradation of synthetic polymers, which may be avaliated by Themogravimetry (TG) and mass spectrometry (MS) combined techniques. This work aims to propose alternatives to the chemistry recycling of low-density polyethylene (LDPE) on mesoporous silica type SBA-15 and AlSBA-15.The mesoporous materials type SBA-15 and AlSBA-15 were synthesized through the hydrothermal method starting from TEOS, pseudobohemite, cloridric acid HCl and water. As structure template was used Pluronic P123. The syntheses were accomplished during the period of three days. The best calcination conditions for removal of the organic template (P123) were optimized by thermal analysis (TG/DTG) and through analyses of Xray diffraction (XRD), infrared spectroscopy (FT-IR), nitrogen adsorption and scanning electron microscopy (SEM) was verified that as much the hydrothermal synthesis method as the calcination by TG were promising for the production of mesoporous materials with high degree of hexagonal ordination. The general analysis of the method of Analog Scan was performed at 10oC/min to 500 oC to avoid deterioration of capillary with very high temperatures. Thus, with the results, we observed signs mass/charge more evident and, using the MID method, was obtained curve of evolution of these signals. The addition of catalysis produced a decrease in temperature of polymer degradation proportional to the acidity of the catalyst. The results showed that the mesoporous materials contributed to the formation of compounds of lower molecular weight and higher value in the process of catalytic degradation of LDPE, representing an alternative to chemical recycling of solid waste