901 resultados para Angle’s class II malocclusion
Resumo:
Objective: The aim of this study was to evaluate the 2-year clinical performance of class II restorations made with a composite resin with two different viscosities.Methods: 47 patients received two class II restorations (n = 94), one made with GrandioSO (conventional viscosity CV), and the other with GrandioSO Heavy Flow (flowable viscosity FV), subjecting both materials to the same clinical conditions. The self-etching adhesive Futurabond M was used for all restorations. The composites were inserted using the incremental technique. The restorations were evaluated using the modified USPHS criteria according to the periods: baseline, 6 months, 1 year and 2 years after restorative procedures.Results: After 24 months, 40 patients attended the recall and 78 restorations were evaluated. In all periods, no secondary caries was observed. After 6 months, there were slightly overall changes of scores for most parameters. After 24 months, the higher number of changes from score Alfa to Bravo was observed for marginal discolouration (32.5% CV and 39.5% FV) and colour match (15% CV and 31.6% FV), followed by proximal contact (25% CV and 23.7% FV) and marginal adaptation (20% CV and 21.1% FV). For wear, surface texture and postoperative sensitivity the changes were very small. Just two restorations were lost during the 24-month follow up. Less than 5% of all restorations showed postoperative sensitivity. Chi-square test showed no significant differences between the two materials for all parameters analysed.Conclusion: After 2 years of clinical service, no significant differences were observed between GrandioSO conventional and GrandioSO Heavy Flow for the parameters analysed. Both materials provided acceptable clinical behaviour in class II restorations. Clinical Significance: This study presents the possibility of using a flowable composite with high filler content, for performing class II restorations. (C) 2014 Elsevier Ltd. All rights reserved.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Aim: to evaluate the association of the long face pattern and the mouth breathing, correlating them with the intraoral characteristics. Methods: the sample was composed of 60 Caucasian Brazilian descendents patients, divided in two groups according to the subjective of their facial pattern. The patients were clinically evaluated to determine their respiratory pattern and the diagnosed of malocclusion. The lateral teleradiographies were drawn in standard to verification facial cephalometric pattern. Chi-Square analysis evaluated the association between subjective facial pattern and type of breathing; facial pattern subjective and cephalometric facial pattern. It was also the chi-square with yates correction to evaluate the associations between subjective facial pattern, type of breathing and posterior cross bite; facial subjective standard, type of breathing and anterior open bite; facial pattern between subjective, type breathing and type of Angle´s malocclusion. Results: it showed that long face pattern (group 1) was associated with mouth breathing habit and facial cephalometric standard. Moreover, the long-face pattern (group 1) presented that mouth breathing was associated with a posterior crossbite and Angle Class II malocclusion. Conclusion: the long face pattern - evaluated with subjective facial analyses - was associated with mouth breathing. The long face pattern and patients with mouth breathing was associated with a posterior crossbite and Class II Angle's malocclusion.
Resumo:
Malocclusion class II-1, is represented by a high prevalence in Brazil, being something common in orthodontic practice. One of the main characteristics of this malocclusion is jaw retrusion, by what many devices of jaw advance are presented in the literature. Being one of them Herbst's device, which is a functional and fixed device created by Emil Herbst (1905) and updated by Hans Pancherz in the decade of 80s.This device is characterized by keeping the jaw advance in a continuous way, while presenting a less active treatment, leading to an immediate aesthetic impact, and the patient cooperation is not required. To improve the anchoring and prevent the collapse of the apparatus was set up last amended version of it by Dr Raveli quoted as Herbst splint. Recent research indicates the use of this device after the peak pubertal growth, creating an appropriate response condylar. The aim of this work is to show the orthodontist a choice of how to use the splint Herbst in Class malocclusions II-1.
Resumo:
Objectives: natural dentofacial changes and that induced by the Thurow modified extra oral appliance (TMEOA) were evaluated in this prospective study. Methodology: the data consisted of fifteen Class II division 1 children 7 to 10 years old, with anterior open bite and hiperdivergent facial pattern treated with the Thurow appliance and of fifteen Class II division 1 children followed longitudinally from 6 to 12 years of age without treatment (Burlington Growth Centre, Toronto University, Canada). The analyses were based in traditional measurements obtained in lateral cephalometric radiographs scanned with the aid of the software Radiocef Studio®. Radiographs were taken in the beginning and after 1 year of treatment for the treated group and at the 6, 9 and 12 years of age for the control group. Results: the data analysis showed that the TMEOA significantly reduced the SNA, ANB, AOBO, SNPOc SNPM, SGO/NMe, OJ e OB. On the other hand the appliance did not interfere with the SNB e SNPP. The natural growth promoted significant change in the ANB, AOBO, SNPOc, OJ e OB from 6 to 9 years and in the SNB, SNPOc e SGo/NMe from 9 to 12 years. The restriction of the maxillary growth (SNA), reduction of the skeletal discrepancy (ANB) and the reduction of the overjet (OJ) were significant with the treatment considering the natural growth as verified in the control group. Conclusion: the TMEOA corrected the skeletal Class II malocclusion by maxillary restriction, reducing the overjet, closing the anterior open bite and decreasing both the hyper divergent facial pattern and mandible plane inclination.
Resumo:
Two treatment options are available for adult patients with skeletal Class II malocclusion caused by mandibular deficiency: combined mandibular advancement surgery and orthodontic treatment or mandibular advancement appliance. This study aimed to analyze the effects of two therapeutic modalities of Class II malocclusion treatment with mandibular deficiency. Two distinct individuals with Class II malocclusion division 1 and mandibular deficiency were treated after growth spurt. The first individual used the Herbst appliance as a therapeutic option and the second individual was treated with bilateral sagittal osteotomy. The cephalometric, occlusion and face results were evaluated for both individuals. Correction of Class II malocclusion was observed on both Herbst and surgery patients resulting on a normal occlusal relationship with normal overjet and overbite. Therefore it was concluded that Herbst appliance can be used to treat borderline skeletal Class II in adult patients.
Resumo:
The aim of this study was to evaluate the facial profile changes due to natural growth and induced by Herbst appliance and Bionator in the treatment of Class II, division 1 malocclusion. In order to do that, we used a sample of 90 lateral radiographs of 45 individuals in pre-pubertal stage, divided up in two experimental groups and one control. The first group, composed of 15 brazilian individuals, with initial mean age of 9.4 years, was treated with the Herbst appliance for a period of seven months. The second experimental group consisting of 15 brazilian individuals, initial mean age of 9.9 years has gone through bionator therapy for an average period of 21 months. The control group of 15 individuals, who were not treated orthodontically, comes up from the Burlington Growth Centre, University of Toronto, Canada. The intragroup comparison was performed using the Student t test and intergroup comparisons by ANOVA complemented by the Bonferroni test. The results have shown that only the group treated with the Herbst appliance presented significant changes in facial profile with improvement of its convexity and lower lip protrusion.
Resumo:
Due to its high prevalence in general population, Angle Class II malocclusion has been widely studied by several authors, as well as the methods for its treatment. Among the possible treatment methods stands out the Herbst appliance. Reintroduced more than three decades ago in the orthodontics community, it became the most utilized appliance because it does not require patient compliance, and provides continued action through bilateral telescopic tubes. The objective of the present article was to demonstrate the early treatment of Class II Division 1 malocclusion with mandibular retrusion using Herbst appliance.
Resumo:
The current reports the case of a young patient with malocclusion Class II division 1 on permanent dentition treated in two stages, rthopedics and orthodontics, respectively. At first, the banded Herbst appliance was used duringa 7 months period, followed by a T4K appliance, Trainer for Kids used as retention, and on the second stage the corrective Orthodontics was performed. The results showed the acquirement of a Class I dental relationship, which was kept stable, with excellent intercuspation, even after 5 years of the removal of the Herbst appliance, as well as the correction of the overjet and the reduction of the facial profile convexity. It can be concluded that the Herbst appliance was very efficient in correcting the Class II malocclusion, long term, also providing a very favorable effect on the facial profile.
Resumo:
The aim of this retrospective study was to evaluate mandibular and maxillary changes induced by the use of Herbst applianceand by natural growth through oblique cephalometric radiographs in children with Class II division 1 malocclusion with mandibular retrusion. A sample of 49 individuals with age ranging from 8 to 10 years old (before growth peak) with Class II division 1, were into two groups: Herbst treated group (n=24) and control group (n=25). Both groups were paired for gender and chronological age. Statistical analysis was performed through Student’s t test. The Herbst appliance promoted the Class II correction in a 7 months period by mesialization of lower permanent first molars and distalization of upper permanent first molars. The Herbst appliance had no influence over the mandibular structure or the mandibular length. It was concluded that early treatment with Herbst appliance corrected the Class II malocclusion by means of dentoalveolar changes.
Resumo:
Patients with Class II division 2 malocclusion and mandibular retrusion have limited treatment options after the growth peak, such as surgical-orthodontic treatment or mandibular advancement devices. Among bite-jumping devices, the Herbst appliance allows greater increase of mandibular growth since it does not require patient compliance and allows continuous use. This case report presents the treatment of a Class II division 2 malocclusion in a patient after growth peak, performed in two stages. The first stage included the upper incisors proclination and overjet increase with multibracket appliance to benefit next stage. The second stage involved mandibular advancement using Herbst appliance aiming to correct the Class II molar relationship. The treatment resulted in a stable occlusion with periodontal health, normal functions and facial aesthetics improvement. Dental and skeletal changes arising from treatment could be assessed by cephalometric analysis and superimposition of pretreatment and post-treatment cephalometric tracings. Antero-posterior discrepancy was corrected by means of dental movement as well as by mandibular growth increment stimulated by the Herbst appliance.
Resumo:
This work had aim to present two clinical cases with open bite Class II malocclusion that treated in the phase of the mixed dentition with the modified Thurow appliance and in the permanent dentition with fixed appliance. The dentoskeletal effects of these appliances were carefully analyzed with the aid of metallic implants inserted in both maxilla and mandible. The correction of the malocclusion and the improvement of the skeletal, dental and facial relationship were observed in both cases. The modified Thurow appliance followed by fixed-appliance as a two-phase treatment protocol revealed to be an effective treatment approach for the two young people that initially presented a Class II division 1 malocclusion associated to anterior open bite presented.
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Objectives: The aim of this study is to report on the treatment of mandibular Class II furcation defects with enamel matrix protein derivative (EMD) combined with a beta TCP/HA (beta-tricalcium phosphate/hydroxyapatite) alloplastic material. Method and Materials: Thirteen patients were selected. All patients were nonsmokers, systemically healthy, and diagnosed with chronic periodontitis; had not taken medications known to interfere with periodontal tissue health and healing; presented one Class II mandibular furcation defect with horizontal probing equal to or greater than 4 mm at buccal site. The clinical parameters evaluated were probing depth (PD), relative gingival margin position (RGMP), relative vertical clinical attachment level (RVCAL), and relative horizontal clinical attachment level (RHCAL). A paired Student t test was used to detect differences between the baseline and 6-month measurements, with the level of significance of .05. Results: After 6 months, the treatment produced a statistically significant reduction in PD and a significant gain in RVCAL and RHCAL, but no observable change in RGMP. RVCAL ranged from 13.77 (+/- 1.31) at baseline to 12.15 (+/- 1.29) after 6 months, with a mean change of -1.62 +/- 1.00 mm (P<.05). RHCAL ranged from 5.54 (+/- 0.75) to 2.92 (+/- 0.92), with a mean change of -2.62 +/- 0.63 mm (P<.05). After 6 months, 76.92% of the patients improved their diagnosis to Class I furcation defects while 23.08% remained as Class II. Conclusion: The present study has shown that positive clinical results may be expected from the combined treatment of Class II furcation defects with EMD and beta TCP/HA, especially considering the gain of horizontal attachment level. Despite this result, controlled clinical studies are needed to confirm our outcomes.
Resumo:
Phospholipases D (PLDs), the major dermonecrotic factors from brown spider venoms, trigger a range of biological reactions both in vitro and in vivo. Despite their clinical relevance in loxoscelism, structural data is restricted to the apo-form of these enzymes, which has been instrumental in understanding the functional differences between the class I and II spider PLDs. The crystal structures of the native class II PLD from Loxosceles intermedia complexed with myo-inositol 1-phosphate and the inactive mutant H12A complexed with fatty acids indicate the existence of a strong ligand-dependent conformation change of the highly conserved aromatic residues, Tyr 223 and Trp225 indicating their roles in substrate binding. These results provided insights into the structural determinants for substrate recognition and binding by class II PLDs.