A desistência de alunos na licenciatura em física no Instituto Federal de Educação, Ciência e Tecnologia do Rio Grande do Norte (IFRN): causas e sugestões para o combate

This dissertation proposes studying the issue of withdrawal undergraduate in physics at the Instituto Federal de Educação, Ciência e Tecnologia do Rio Grande do Norte (IFRN) and collaborate with suggestions for dealing with this problem. The first chapter begins with an overview of two significant problems in the Brazilian educational system: the high dropout rates in degrees in physics and the lack of teachers with specific training in this science. Then, we discuss the relevance of this research to the area of physics teaching, as well as justify its completion as part of a professional master's degree. After, we present a proper definition for the term withdrawal, which is based on the existing problem in the IFRN. And, in the same chapter, we explicitly the focus, the objectives and the methodological aspects of this work. The results obtained in our investigation are presented in next four chapters. In the second chapter of this dissertation, we present: a brief history of the creation of IFRN degree in physics, the functioning of this course and the foundation of classrooms 2004.2 and 2006.1. We also show a kind of map of the withdrawal of the groups investigated (the dropout rate was 84.4% in both groups) and an analysis of the relationship between the curricula of each of them and the number of dropouts. In the third chapter, we display a descriptive statistics of the students which dropout and found that the largest dropout occurred with students who are women, married, parents of one kid; workers, joined with a minimum age of 23 years and completed high school at least 6 years. Then in the fourth chapter, we reveal and discuss the students' reports on the causes of their dropout. From the data presented, we can say that the answer to the question "What was the main reason for your dropout?" Is mainly in personal injury claims: another option for upper-level course and lack of time to devote to the course. In the fifth chapter, we show the results related to teacher s opinions about the phenomenon in question. We detected three main causes for the abandonment, according to teachers: the lack of dedication, the lack of interest and lack of integration in the course. In the sixth and final chapter, we discuss the results and present our conclusion and the proposed report - the product of this dissertation, presented as Annex. This report contains mainly suggestions for curricular and institutional actions that can contribute to reducing the dropout degree in Physics in the IFRN. The main actions suggested are: implementation of the curriculum in disciplines, implementation of programs or actions to combat this poor content of basic training, implementation of specific programs or actions for the student worker, and dissemination of IFRN degree in physics in schools through seminars or workshops

Práticas de leitura e escrita na formação em ciências e tecnologia

The discussion about the need of improving the reading and the writing practices of professionals from the most different knowledge areas has caused, in Brazilian and foreign institutions of higher education, a movement of insertion of curricula components whose focus is the reading and the writing in academic formation. To contributing with the reflection about that discussion, this master s degree dissertation has as object of study the situated linguistic formation. Our general objective is to analyze a linguistic formation proposal to graduating students from the Bachelor s degree in Science and Technology (BCT) of the Federal University of Rio Grande do Norte (UFRN). To constructing that analysis, we have established four specific objectives: a) verifying if the ten brazilian Institutions of Higher Education which offer the BCT have curricula components of reading and writing directed to that formation; b) describing how these Bachelor s degree reading and writing curricula components are presented; c) examining differences and similarities which, in general, exist among curricula components related to reading and writing in each one of the researched institutions; d) revealing which categories delineate the linguistic formation developed in the BCT of the UFRN. In order to reaching our goals, this work has been based on the dialogical conception of the language (BAKHTIN [1952-1953] 2010), on the literacy studies (KLEIMAN [1995] 2008; TINOCO, 2008) and on the critical pedagogy (FREIRE, 1980; 2007). Methodologically, this qualitative research of ethnographic direction (ANDRÉ, 1995) is grounded in Applied Linguistics (PEREIRA; ROCA, 2009; PASCHOAL; CELANI (Orgs.), 1992). This research has the contribution of professors, scholars and monitors of the field of Reading and Writing Practices (PLE) and also graduating students from the UFRN BCT which had already studied PLE-I and/or PLE-II. The tools used for data collection/generation were: curricula components programs related to reading and writing in the BCT in the researched higher education institutions (IES), questionnaires, semi-structured interviews and profiles. The generated data allowed us to establish the following analysis categories: situationality (real situation, thematic contemporaneity and thematic focalization) and literacy projects (learning community and protagonism). The results achieved show that most IES which offer BCT worry about improving the reading and writing competences of their graduating students; however, there is still a lot to be done (increase of the number of class hours, contents and methodological aspects review, theoretical referential sophistication) so that the curricula components can be configured as a situated and significant linguistic formation. Finally, we make some suggestions for improving the work which has been made in the BCT of the UFRN, making then the mother tongue teaching in courses of the area of exact and technological sciences stronger

Pressupostos ontológicos para se pensar a nova tecnologia: técnica, informação e ser e tempo

La recherche presentée, realisée sur le domaine de la méthaphysique, s´agit de rassembler des pressupositions pour une fondamentation ontologique de la technologie de l´Information, basé sur la philophie de Martin Heidegger; foncièrement, sur l´analytique existentiel du Dasein dans l´ouvrage Être et Temps. À partir de la pensée sur ce qui est aujourd´hui , il s´agit d´investiguer sur quels fondaments la Nouvelle Tecnologie se fut érigée de façon a que nous sommes engajés au projet de numérisation des étants que en même temps que destine l´homme a l´oubli de l´Être, l´offre la possibilité de transformation. Le rapport entre la question de l´Être et la question de la technique est analysé comme des chemins croisés et dans ce carrefour il devient possible penser ce qui est technique, ce qui est information pour Heidegger et de quel façon les modes existentiels du Dasein sont prêtes pour caractériser l ´homme au sein de la tecnologie de l´information. Par cette appropriation, il reste penser comment c´est possible l´ouverture d´une perspective de reconduction de l´homme à la vérité de l´Être. Finalement, la structuration des fondements rends possible la réflexion discursive général: avec qui nous nous ocuppons, comme nous sommes, dans quelle direction nous nous acheminons, les thèmes générales, respectivement, des trois chapitres. Les points d´investigation du premier chapitre son: a) La caractérisation précise du Dasein, appuyé sur des considerations de Benedito Nunes, Hans-Georg Gadamer, Jacques Derrida et Rüdiger Safränski; b) Le concept de technique et son essence chez Heidegger; c) la distinction entre technique et technologie, appuyé sur le pensée de J. Ellul, Michel Séris, Otto Pöggeler, Michel Haar, Dominique Janicaud; c) Le concept de cibernetique chez Heidegger et chez Norbert Wiener; d) La caractérisation preliminaire d´information, l´analyse étimologique e philosophique, l´avis de Heidegger te les théories de Rafael Capurro; f) L´Analyse du phénomène de la numérisation des étants, des considérations de Virilio, et l´analyse d´un concept de virtuel avec Henri Bergson et Gilles Deleuze. Dans le deuxième chapitre, l´analyse des existentiels du Dasein vers le sommaire des fondements de base pour la caractérisation de la technologie de l´information comme un problème philosophique. Finalement, aprés avoir presenté les concepts introdutoires que délimitent le questionement, suivi par les indications et pressupositions ontologiques trouvés sur Être et Temps, le troisième chapitre disserte sur le péril, ce qui sauve et la sérénité, les trois mots-clés de la pensée heideggerienne sur la technique que permettent l´approche conclusif de la question

Uma nova tecnologia no pensamento de Herbert Marcuse: arte e técnica na sociedade unidimensional

This dissertation addresses the issue of technology in the work of Herbert Marcuse, explaning the merger between technology and domination that result in a totalitarian technological apparatus. Thus, technological civilization is supported and justified by a rational technological apparatus in the society, we have come not only the philosophy of Marcuse, but other great thinkers too, like Heidegger, Hegel, Marx. We also present a debate involving the philosophy of science, logic and linguage. Marcuse points to the need for a new technological rationality that emerge from a new sensibility, where the technique would allow a new relationship between man and nature. From then on, would emerge the need for a new subject. This transition would be possible by means of sensitivity, where art would become the art of live. With the link between art and technique made possible by new sensitivity, the author leaves one of its main contribution: he leaves open the possibility for the subject to choose new targests for technological development

Uma nova tecnologia no pensamento de Herbert Marcuse: arte e técnica na sociedade unidimensional

This dissertation addresses the issue of technology in the work of Herbert Marcuse, explaning the merger between technology and domination that result in a totalitarian technological apparatus. Thus, technological civilization is supported and justified by a rational technological apparatus in the society, we have come not only the philosophy of Marcuse, but other great thinkers too, like Heidegger, Hegel, Marx. We also present a debate involving the philosophy of science, logic and linguage. Marcuse points to the need for a new technological rationality that emerge from a new sensibility, where the technique would allow a new relationship between man and nature. From then on, would emerge the need for a new subject. This transition would be possible by means of sensitivity, where art would become the art of live. With the link between art and technique made possible by new sensitivity, the author leaves one of its main contribution: he leaves open the possibility for the subject to choose new targests for technological development

Diagnóstico do usuário no aprimoramento dos serviços de tecnologia da informação: um projeto de intervenção para o Ministério Público do Estado do Rio Grande do Norte

The information tecnology (IT) has, over the years, gaining prominence as a strategic element and competitive edge in organizations, public or private. In the judiciary, with the implementation of actions related to Judiciário Eletrônico, information technology (IT), definitely earns its status as a strategic element and significantly raises the level of dependence of the organs of their services and products. Increasingly, the quality of services provided by IT has direct impact on the quality of services provided by the agency as a whole. The Ministério Público do Estado do Rio Grande do Norte (MPRN) deployments shares of Electronic Government, along with an administrative reform, beyond these issues raised, caused a large increase in institutional demand for products and services provided by the Diretoria de Tecnologia da Informação (DTI), a sector responsible for the provision of IT services. Taking as starting point strategic goal set by MPRN to reach a 85% level of user satisfaction in four years, we seek to propose a method that assists in meeting the goal, respecting the capacity constraints of the IT sector. To achieve the proposed objective, we conducted a work in two distinct and complementary stages. In the first step we conducted a case study in MPRN, in which, through an internal and external diagnosis of DTI, accomplished by an action of internal consulting and one research of the user satisfaction, we seek to identify opportunities of change seeking to raise the quality perceived of the services provided by the DTI , from the viewpoint of their customers. The situational report, drawn from the data collected, fostered changes in DTI, which were then evaluated with the managers. In the second stage, with the results obtained in the initial process, empirical observation, evaluation of side projects of quality improvement in the sector, and validation with the managers, of the initial model, we developed an improved process, gazing beyond the identification of gaps in service a strategy for the selection of best management practices and deployment of these, in a incremental and adaptive way, allowing the application of the process in organs with little staff allocated to the provision of information technology services

Prospecção e formação no domínio das competências e habilidades em tecnologia da informação: o caso do projeto metrópole digital em Natal/RN

This study deals with cognitive competences and abilities that are relevant to selection and education regarding Information Technology (IT). These competences relate to problem solving, decision making, and practical intelligence that regard scholar and extracurricular knowledge mobilization. The research aimed to contribute for the improvement of a selection instrument, consisting of five arrays of skills (dealing with objectives and prospection), as well as the development and comprehension of those skills that are involved in IT education. This is done by means of an analysis on the selection instrument used in the first selective process that occurred at Metropole Digital an Institute at the Federal University of Rio Grande do Norte in Brazil. This was evaluated aiming to acknowledge IT education (with basic training and emphasis on Web programming and electronics). The methodology used was of quantitative method involving performance scores relating education delivery. An Anova analysis of variance was done along with descriptive analysis involving socioeconomic data that was not observed in the meaningful relations between parental instruction and student performance in the graduate course. These analyses were able to point out the importance and need of the policies for vacancy reservation on behalf of public school students. A Spearman correlation analysis was done considering the instrument selection performance in the training course. The instrument is presented as a predictor that is significantly moderate and presents a good performance in the course as a whole. A Cluster and Regression analysis was also realized in the process. The first analysis allowed finding performance groups (Clusters) that ranged from medium and inferior. The regression analysis was able to point out association amongst criterion variables and the (average performance in basic and advanced modules) and explanatory (five matrixes). Regression analysis indicated that matrix 1 and matrix 3 were pointed out as being the strongest ones. In all the above analysis, the correlation between the instrument and the course was considered moderate. Thus this can be related in some of the aspects present in the course such as emphasis on evaluation itself as well as in technical contents and practical skills (educational ones) and competences and selection skills. It is known that the mediation of technological artifact in cultural context can foster the development of skills and abilities relevant to IT training. This study provides subsidies to reflect on the adoption of selection instrument and IT training in the Institute. Thus the research offers means to achieve a interdisciplinary discussion and enriching of areas such as Psychology and Information Technology; all of which regarding competencies and skills relevant in IT training

Tecnologia eletroquímica como tratamento alternativo de efluentes têxteis sintéticos utilizando ânodos de platina e diamante

In this work, the treatment of synthetic wastewaters containing Remazol Red BR (RRB) and Novacron Blue C-D (NB) by anodic oxidation using boron doped diamond anodes (BDD) and Novacron Yellow (YN) using BDD and Platinum (Pt) anodes was investigated. Galvanostatic electrolyses of RRB and NB synthetic wastewaters have led to the complete decolorization removal at different operating conditions (current density, pH and temperature). The influence of these parameters was investigated in order to find the best conditions for dyestuff colour removal. According to the experimental results obtained, the electrochemical oxidation process is suitable for decolorizing wastewaters containing these textile dyes, due to the electrocatalytic properties of BDD and Pt anode. Energy requirements for removing colour during galvanostatic electrolyses of RRB, NB and YN synthetic solutions depends mainly on the operating conditions; for example for RRB, it passes from 3.30 kWh m-3 at 20 mA cm-2 to 4.28 kWh m-3 at 60 mA cm-2 (pH = 1); 15.23 kWh m-3 at 20 mA cm-2 to 24.75 kWh m-3 at 60 mA cm-2 (pH = 4.5); 10.80 kWh m-3 at 20 mA cm-2 to 31.5 kWh m-3 at 60 mA cm-2 (pH = 8) (data estimated per volume of treated effluent). In order to verify the Brazilian law regulations of NB and RRB synthetic solutions after electrochemical decolourisation treatment, Hazen Units values were determined and the total colour removal was achieved; remaining into the regulations. Finally, electrical energy cost for removing colour was estimated

Aplicação da tecnologia eletroquímica como alternativa para a remoção de corante têxteis em efluentes sintéticos e reais utilizando anodos de platina e diamante

In this work, electrochemical technology was used to treat synthetic wastewater containing Methyl Red (MR) and Blue Novacron (BN) by anodic oxidation using anodes platinum (Pt) and real samples of textile effluents using DDB anodes and platinum (Pt). The removal of color from the galvanostatic electrolysis of synthetic wastewater MR and BN, and the actual sample has been observed under different conditions (different current densities and temperature variation). The investigation of these parameters was performed in order to establish the best conditions for removal of color and chemical oxygen demand (BOD). According to the results obtained in this study, the electrochemical oxidation processes suitable for the degradation process of color and COD in wastewater containing such textile dyes, because the electrocatalytic properties of Pt and BDD anodes consumption energy during the electrochemical oxidation of synthetic solutions AN and MR and real sample, mainly depend on the operating parameters of operation, for example, the synthetic sample of MR, energy consumption rose from 42,00kWhm-3 in 40 mAcm-2 and 25 C to 17,50 kWhm-3 in 40mAcm-2 and 40 C, from the BN went 17,83 kWhm-3 in 40mAcm and 40°C to 14,04 kWhm- 3 in 40mAcm-2 and 40 C (data estimated by the volume of treated effluent). These results clearly indicate the applicability of electrochemical treatment for removing dyes from synthetic solutions and real industrial effluents

Passividade na interface prótese/pilar intermediário de infraestrutura implantossuportadas confeccionadas pela tecnologia CAD/CAM e método convencional

The objective of this research was to evaluate the passivity and strain induced in infrastructures screwed on abutments, made by CAD/CAM technology, and to compare these samples with parts manufactured by conventional casting. Using CAD/CAM technology, 4 samples were made from zirconia (Zircad) and 4 samples were manufactured from cobaltchrome (CoCrcad). The control groups were 4 specimens of cobalt-chrome, made by onepiece casting (CoCrci), for a total of 12 infrastructures. To evaluate the passivity, the infraestructures were installed on the abutments. One end was tightened and the vertical gap between the infrastructure and the prosthetic abutment was measured with scanning electron microscopy (250×). The mean strain in these infrastructures was analyzed via the photoelasticity test. A significant difference (p = 0.000) in passivity was observed between the control (CoCrci) and sample groups (CoCrcad and CoCrci). CoCrcad exhibited the best value of passivity (48.76 ± 13.45 μm) and CoCrci the worst (187.55 ± 103.63 μm), Zircad presented an intermediate value (103.81 ± 43.15 μm). When compared to the other groups, CoCrci showed the highest mean strain around the implants (17.19 ± 7.22 kPa). It was concluded that the zirconia infrastructure made by CAD / CAM showed a higher vertical marginal misfit than those made in cobalt-chromium alloy with the same methodology, however, the tension generated in the implants was similar. The CAD/CAM technology is more accurate for passivity and mean strain of infrastructure screwed on abutments than conventional manufacturing techniques

Sociedade da Informação: avanços e retrocessos no acesso e no uso da informação

The Information Society (IS) may be taken as a geopolitical organization which started after the Third Industrial Revolution, having direct impact on the use of information and Information and Communication Technologies (ICT). The expression arose as techno-social paradigm change in the post-industrial society, aiming to use information as currency to the society-in-progress at that time. In Brazil it has become stronger with the Programa Sociedade da Informação no Brasil-Livro Verde, lunched by the Ministerio da Ciência e Tecnologia, in September 2000 without any discussion with the civil society to formulate the main document. Our main goal in this article is to discuss the Information Society in contemporary times, and also the organized and conscious use of information, looking for key-concepts to a better understanding of it, from some topics as digital inclusion-exclusion to the use of digital informational resources.

Uma abordagem para promover o alinhamento entre a estratégia de negócio e a tecnologia de informação

Currently with the increase in complexity in doing business, organizations are seeking information systems that help to quickly respond to new demands in the processes of production of products and services. An information system is no longer just a support tool and has become an integral part of doing business. However, in spite of significant technological evolution in recent years, information systems that support business do not respond efficiently to the constant alterations that occur in many organizations. One of the main problems faced by information systems currently is the lack of strategic alignment between business strategy and information technology. The concept of strategic alignment can be defined as a way between business strategies and objectives and the strategies, objectives and functions of information technology in such as way as to contribute to the increase in competitivity of the organization over time. Strategic alignment together with strategic planning are important management instruments. Approaches for operationalizing this alignment are being developed currently but are still in their initial stages due to the fact that it is a relatively new concept in the literature. Another point that needs to be taken into consideration during the strategic alignment is the question of trackability between the business elements and IT. Trackability (Tracking) is necessary for example when one wishes to know exactly which goal defined in the business strategy was left out or not accepted due to a modification made in the IT strategy. Very few proposals present concrete ways supported by software systems in order to obtain strategic alignement while taking into consideration this trackability. Therefore the objective of this work is to propose the creation of a strategic alignment process supported by a software system which is capable of permitting trackability between the organizational objectives and the business processes based on formalization standards defined through a model oriented approach

Tecnologia educacional no contexto do ensino de histologia: pesquisa e desenvolvimento de um ambiente virtual de ensino e aprendizagem

Discutem-se as mudanças constatadas no ensino da Histologia, como a tecnologia tem sido empregada nos contextos de aprendizagem, os aspectos pedagógicos inerentes à utilização de recursos, tais como atlas digitais e microscópios virtuais, e apresenta-se pesquisa sobre o desenvolvimento de um ambiente virtual de ensino-aprendizagem de Histologia, que contou com a participação de alunos e professores em sua construção. Verificou-se que os ambientes virtuais e outros recursos didáticos baseados nas Tecnologias da Informação e da Comunicação (TICs) procuram atender à atual tendência de complementar a educação presencial com ferramentas de educação a distância, que podem ser utilizadas facultativamente no estudo extraclasse continuado. Concluiu-se que, embora as novas tecnologias possam contribuir para o ensino de Histologia, os materiais didáticos baseados em TICs devem se adequar às expectativas docentes e discentes e aos aspectos pedagógicos e ergonômicos, e precisam ser adotados pelos professores não como ferramentas isoladas, mas integrados às estratégias de ensino- -aprendizagem

As múltiplas faces da evasão na educação superior a distância: a experiência do curso de tecnologia em gestão ambiental do IFRN em dois pólos de apoio presencial

This research presents a reflection on the dropout rates in higher education courses available through distance education in a context marked by deep changes in various spheres of society and by the uncontrolled growth of this educational method. For this, the object of analysis is related to the reality of students of Technology in Environmental Management offered by the Instituto Federal de Educação, Ciência e Tecnologia, Rio Grande do Norte (RN), Brazil, through the distance education in presence support poles located in Mossoró (RN) and Martins (RN). In this field research development several strategies of data collection are used, such as participant observation of reality; analysis of documents related to distance education and to the classes in Technology in Environmental Management; questionnaires answered by students who dropped the course. The results of such research enable us to say that the dropout rates in distance higher education is mainly referred to the consequences of a combination of aspects involved in the course development, personal difficulties faced by students during the period they attend the lessons and elements inherent in the context in which the course and students are inserted. Nevertheless there are specific situations in which the student may drop the program due to the influence of a single aspect, whether it is inherent in the development of the course, a personal situation, or even a factor determined by the context in which the course or the student belongs to

O papel da tecnologia cênica e seus desdobramentos para uma economia da produção cultural no nordeste

O papel da tecnologia na produção contemporânea em artes cênicas vem influenciando profundamente as formas de recepção e produção de Teatro, Dança, espetáculos de Circo, shows musicais, entre outras manifestações espetaculares organizadas. Sua aplicação se estende amplamente a outras áreas que necessitam enfatizar o caráter cênico de seus processos de fruição como é o caso dos museus, feiras de ciências, exibições e mostras em artes visuais e o aparato tecnológico de luz, som e configuração espacial usados para estes fins. Neste sentido, o desenvolvimento deste tipo de tecnologia vem gerando e alimentando cadeias produtivas que movimentam uma economia da produção cultural e criam uma rede de relações articuladas em diferentes níveis de atuação, envolvendo produtores de equipamento, fornecedores, lighting designers, cenógrafos, profissionais de sonorização, arquitetos, técnicos de montagem e operação, instituições ensino especializadas, associações de área, entre outros. O foco deste trabalho se concentra em demonstrar como a análise de demandas de tecnologia cênica articuladas pelos sistemas de produção cultural, em particular na região Nordeste do Brasil, possibilitam compreender modelos de organização em curso, contribuindo para o desenvolvimento de uma reflexão multidisciplinar acerca dos processos de produção artística de natureza cênica e como esta produção é afetada pelos limites e possibilidades dos aspectos que caracterizam uma economia destas produções