Airborne concentration of Volatile Organic Compounds in school environment in Brisbane

Traffic emissions are considered as a major source of pollutants, particularly ultrafine particles, in the urban environment. There is an increased concern about airborne particles not only because of their environmental effects but also due to their potential adverse health effects on humans. There have been a number of studies related to the number concentration and size distribution of these particles but studies on the chemical composition of aerosols, especially in the school environment, are very limited. Mejia et. al (2011) reviewed studies on the exposure to and impact of air pollutants on school children and found that there were only a handful of studies on this topic. Therefore, the main focus of this research is on an analysis of the chemical composition of airborne particles, as well as source apportionment and the quantification of ambient concentrations of organic pollutants in the vicinity of schools, as a part of “Ultrafine Particles from Traffic Emissions on Children’s Health” (UPTECH) project. The aim of the present study was to find out the concentrations of different Volatile Organic Compounds (VOCs) in both outdoor and indoor locations from six different schools in Brisbane.

Atmospheric deposition as a source of heavy metals in urban stormwater

Atmospheric deposition is one of the most important pathways of urban stormwater pollution. Atmospheric deposition which can be in the form of either wet or dry deposition have distinct characteristics in terms of associated particulate sizes, pollutant types and influential parameters. This paper discusses the outcomes of a comprehensive research study undertaken to identify important traffic characteristics and climate factors such as antecedent dry period and rainfall characteristics which influences the characteristics of wet and dry deposition of solids and heavy metals. The outcomes confirmed that Zinc (Zn) is correlated with traffic volume whereas Lead (Pb), Cadmium (Cd), Nickel (Ni), and Copper (Cu) are correlated with traffic congestion. Consequently, reducing traffic congestion will be more effective than reducing traffic volume for improving air quality particularly in relation to Pb, Cd, Ni, and Cu. Zn was found to have the highest atmospheric deposition rate compared to other heavy metals. Zn in dry deposition is associated with relatively larger particle size fractions (>10 µm), whereas Pb, Cd, Ni and Cu are associated with relatively smaller particle size fractions (<10 µm). The analysis further revealed that bulk (wet plus dry) deposition which is correlated with rainfall depth and contains a relatively higher percentage of smaller particles compared to dry deposition which is correlated with the antecedent dry period. As particles subjected to wet deposition are smaller, they disperse over a larger area from the source of origin compared to particles subjected to dry deposition as buoyancy forces become dominant for smaller particles compared to the influence of gravity. Furthermore, exhaust emission particles were found to be primarily associated with bulk deposition compared to dry deposition particles which mainly originate from vehicle component wear.

Environmental sustainability of urban road transport : an integrated analysis for life cycle emission impact

Despite of significant contributions of urban road transport to global economy and society, it is one of the largest sources of local and global emission impact. In order to address the environmental concerns of urban road transport it is imperative to achieve a holistic understanding of contributory factors causing emissions which requires a complete look onto its whole life cycle. Previous studies were mainly based on segmental views which mostly studied environmental impacts of individual transport modes and very few considered impacts other than operational phase. This study develops an integrated life cycle inventory model for urban road transport emissions from a holistic modal perspective. Singapore case was used to demonstrate the model. Results show that total life cycle greenhouse gas emission from Singapore’s road transport sector is 7.8 million tons per year. The total amount of criteria air pollutants are also estimated in this study.

Maternal exposure to heatwave and preterm birth in Brisbane, Australia

Objective To quantify the short-term effects of maternal exposure to heatwave on preterm birth. Design An ecological study. Setting: A population-based study in Brisbane, Australia. Population All pregnant women who had a spontaneous singleton live birth in Brisbane between November and March in 2000–2010 were studied. Methods Daily data on pregnancy outcomes, meteorological factors, and ambient air pollutants were obtained. The Cox proportional hazards regression model with time-dependent variables was used to examine the short-term impact of heatwave on preterm birth. A series of cut-off temperatures and durations were used to define heatwave. Multivariable analyses were also performed to adjust for socio-economic factors, demographic factors, meteorological factors, and ambient air pollutants. Main outcome measure Spontaneous preterm births. Results The adjusted hazard ratios (HRs) ranged from 1.13 (95% CI 1.03–1.24) to 2.00 (95% CI 1.37–2.91) by using different heatwave definitions, after controlling for demographic, socio-economic, and meteorological factors, and air pollutants. Conclusions Heatwave was significantly associated with preterm birth: the associations were robust to the definitions of heatwave. The threshold temperatures, instead of duration, could be more likely to influence the evaluation of birth-related heatwaves. The findings of this study may have significant public health implications as climate change progresses.

Prediction of CO concentrations based on a hybrid Partial Least Square and Support Vector Machine model

Due to the health impacts caused by exposures to air pollutants in urban areas, monitoring and forecasting of air quality parameters have become popular as an important topic in atmospheric and environmental research today. The knowledge on the dynamics and complexity of air pollutants behavior has made artificial intelligence models as a useful tool for a more accurate pollutant concentration prediction. This paper focuses on an innovative method of daily air pollution prediction using combination of Support Vector Machine (SVM) as predictor and Partial Least Square (PLS) as a data selection tool based on the measured values of CO concentrations. The CO concentrations of Rey monitoring station in the south of Tehran, from Jan. 2007 to Feb. 2011, have been used to test the effectiveness of this method. The hourly CO concentrations have been predicted using the SVM and the hybrid PLS–SVM models. Similarly, daily CO concentrations have been predicted based on the aforementioned four years measured data. Results demonstrated that both models have good prediction ability; however the hybrid PLS–SVM has better accuracy. In the analysis presented in this paper, statistic estimators including relative mean errors, root mean squared errors and the mean absolute relative error have been employed to compare performances of the models. It has been concluded that the errors decrease after size reduction and coefficients of determination increase from 56 to 81% for SVM model to 65–85% for hybrid PLS–SVM model respectively. Also it was found that the hybrid PLS–SVM model required lower computational time than SVM model as expected, hence supporting the more accurate and faster prediction ability of hybrid PLS–SVM model.

Determinants of eco-efficiency in the Chinese industrial sector

This study measures productive inefficiency within the context of multi-environmental pollution (eco-efficiency) in the Chinese industrial sector. The weighted Russell directional distance model is applied to measure eco-efficiency using production technology. The objective is to clarify how external factors affect eco-efficiency. The major findings are that both foreign direct investment and investment for pollution abatement improve eco-efficiency as measured by air pollutant substances. A levy system for wastewater discharge improves eco-efficiency as measured by wastewater pollutant substances. However, an air pollutant levy does not significantly affect eco-efficiency as measured by air pollutants.

Biological monitoring and Biological Limit Values (BLV): the strategy of the European Union

Occupational standards concerning allowable concentrations of chemical compounds in the ambient air of workplaces have been established in several countries worldwide. With the integration of the European Union (EU), there has been a need of establishing harmonised Occupational Exposure Limits (OEL). The European Commission Directive 95/320/EC of 12 July 1995 has given the tasks to a Scientific Committee for Occupational Exposure Limits (SCOEL) to propose, based on scientific data and where appropriate, occupational limit values which may include the 8-h time-weighted average (TWA), short-term limits/excursion limits (STEL) and Biological Limit Values (BLVs). In 2000, the European Union issued a list of 62 chemical substances with Occupational Exposure Limits. Of these, 25 substances received a "skin" notation, indicating that toxicologically significant amounts may be taken up via the skin. For such substances, monitoring of concentrations in ambient air may not be sufficient, and biological monitoring strategies appear of potential importance in the medical surveillance of exposed workers. Recent progress has been made with respect to formulation of a strategy related to health-based BLVs.

Occurrence of urinary tract tumors in miners highly exposed to dinitrotoluene

Between 1984 and 1997, six cases of urothelial cancer and 14 cases of renal cell cancer occurred in a group of 500 underground mining workers in the copper-mining industry of the former German Democratic Republic, with high exposures to explosives containing technical dinitrotoluene. Exposure durations ranged from 7 to 37 years, and latency periods ranged from 21 to 46 years. The incidences of both urothelial and renal cell tumors in this group were much higher than anticipated on the basis of the cancer registers of the German Democratic Republic by factors of 4.5 and 14.3, respectively. The cancer cases and a representative group of 183 formerly dinitrotoluene- exposed miners of this local industry were interviewed for their working history and grouped into four exposure categories. This categorization of the 14 renal cell tumor cases revealed no dose-dependency concerning explosives in any of the four exposure categories and was similar to that of the representative group of employees, whereas the urothelial tumor cases were predominantly confined to the high-exposure categories. Furthermore, all identified tumor patients were genotyped by polymerase chain reaction, using lymphocyte DNA, regarding their genetic status of the polymorphic xenobiotic metabolizing enzymes, including the N-acetyltransferase 2 and the glutathione-S-transferases M1 and T1. This genotyping revealed remarkable distributions only for the urothelial tumor cases, who were exclusively identified as 'slow acetylators.' This points to the possibility of human carcinogenicity of dinitrotoluene, with regard to the urothelium as the target tissue.

Ozone-induced signaling in Arabidopsis thaliana

Tropospheric ozone (O3) is one of the most common air pollutants in industrialized countries, and an increasing problem in rapidly industrialising and developing countries in Asia, Africa and South America. Elevated concentrations of tropospheric O3 can lead to decrease in photosynthesis rate and therefore affect the normal metabolism, growth and seed production. Acute and high O3 episodes can lead to extensive damage leading to dead tissue in plants. Thus, O3 derived growth defects can lead to reduction in crop yield thereby leading to economical losses. Despite the extensive research on this area, many questions remain open on how these processes are controlled. In this study, the stress-induced signaling routes and the components involved were elucidated in more detail starting from visual damage to changes in gene expression, signaling routes and plant hormone interactions that are involved in O3-induced cell death. In order to elucidate O3-induced responses in Arabidopsis, mitogen-activated protein kinase (MAPK) signaling was studied using different hormonal signaling mutants. MAPKs were activated at the beginning of the O3 exposure. The activity of MAPKs, which were identified as AtMPK3 and AtMPK6, reached the maximum at 1 and 2 hours after the start of the exposure, respectively. The activity decreased back to clean air levels at 8 hours after the start of the exposure. Both AtMPK3 and AtMPK6 were translocated to nucleus at the beginning of the O3 exposure where they most likely affect gene expression. Differences were seen between different hormonal signaling mutants. Functional SA signaling was shown to be needed for the full protein levels and activation of AtMPK3. In addition, AtMPK3 and AtMPK6 activation was not dependent on ethylene signaling. Finally, jasmonic acid was also shown to have an impact on AtMPK3 protein levels and AtMPK3 activity. To further study O3-induced cell death, an earlier isolated O3 sensitive Arabidopsis mutant rcd1 was mapped, cloned and further characterized. RCD1 was shown to encode a gene with WWE and ADP-ribosylation domains known to be involved in protein-protein interactions and cell signaling. rcd1 was shown to be involved in many processes including hormonal signaling and regulation of stress-responsive genes. rcd1 is sensitive against O3 and apoplastic superoxide, but tolerant against paraquat that produces superoxide in chloroplast. rcd1 is also partially insensitive to glucose and has alterations in hormone responses. These alterations are seen as ABA insensitivity, reduced jasmonic acid sensitivity and reduced ethylene sensitivity. All these features suggest that RCD1 acts as an integrative node in hormonal signaling and it is involved in the hormonal regulation of several specific stress-responsive genes. Further studies with the rcd1 mutant showed that it exhibits the classical features of programmed cell death, PCD, in response to O3. These include nuclear shrinkage, chromatin condensation, nuclear DNA degradation, cytosol vesiculation and accumulation of phenolic compounds and eventually patches of HR-like lesions. rcd1 was found to produce extensive amount of salicylic acid and jasmonic acid in response to O3. Double mutant studies showed that SA independent and dependent processes were involved in the O3-induced PCD in rcd1 and that increased sensitivity against JA led to increased sensitivity against O3. Furthermore, rcd1 had alterations in MAPK signature that resembled changes that were previously seen in mutants defective in SA and JA signaling. Nitric oxide accumulation and its impact on O3-induced cell death were also studied. Transient accumulation of NO was seen at the beginning of the O3 exposure, and during late time points, NO accumulation coincided with the HR-like lesions. NO was shown to modify defense gene expression, such as, SA and ethylene biosynthetic genes. Furthermore, rcd1 was shown to produce more NO in control conditions. In conclusion, NO was shown to be involved in O3-induced signaling leading to attenuation of SA biosynthesis and other defense related genes.

Environmental remediation by photocatalysis

Photocatalysis refers to the oxidation and reduction reactions on semiconductor surfaces, mediated by the valence band holes and conduction band electrons, which are generated by the absorption of ultraviolet or visible light radiation. Photocatalysis is widely being practiced for the degradation and mineralization of hazardous organic compounds to CO2 and H2O, reduction of toxic metal ions to their non-toxic states, deactivation and destruction of water borne microorganisms, decomposition of air pollutants like volatile organic compounds, NOx, CO and NH3, degradation of waste plastics and green synthesis of industrially important chemicals. This review attempts to showcase the well established mechanism of photocatalysis, the use of photocatalysts for water and air pollution control,visible light responsive modified-TiO2 and non-TiO2 based materials for environmental and energy applications, and the importance of developing reaction kinetics for a comprehensive understanding and design of the processes.

Avaliação das propriedades físico-químicas do biodiesel de soja, algodão e mamona e da mistura de biodiesel de soja e algodão

Uma das maiores atividades humanas que gera impacto ao meio ambiente é o setor de transportes automotores, especialmente veículos que utilizam óleo diesel mineral como forma de combustível. Independente do conforto ou objetivos que levem a utilização deste tipo de transporte, estes produzem emissões que contém diversos tipos de poluentes atmosféricos. A substituição de óleo diesel mineral pelo biodiesel vegetal, vem se apresentando como uma alternativa para este setor, especialmente para o Brasil, que com base em sua imensa biodiversidade com plantas oleaginosas deverá se constituir em um dos maoires produtores mundiais de biodiesel vegetal. Este trabalho apresenta um estudo comparativo entre três tipos de oleaginosas (soja, algodão e mamona) e uma msitura binária v/v soja e algodão. Os resultados obtidos neste estudo foram comparados as especificações definidas pelas normas: Brasileira (RANP 07/2008), Européia (EN/14214) e Americana (ASTM D-6751). Entre todas as amostras estudadas, o óleo de mamona não atende algumas propiedades físico-químicas das normas em questão. As amostras de biodiesel de soja e algodão, individualmente e combinadas, com caracteristicas, aplicações, zoneamento agroclimático e sazonalidade de produção regionalmente diferente apresentam propiedades físico-químicas semelhantes, podendo ser considerada uma fonte renovavél de energia.

Qualidade do ar e atendimentos médicos de emergência por sintomas respiratórios em crianças residentes em Jacarepaguá, Rio de Janeiro

Apesar da cidade do Rio de Janeiro ser uma das mais importantes metrópoles brasileiras são muito pouco conhecidos os efeitos da exposição aos poluentes atmosféricos na saúde da população carioca. Este trabalho foi idealizado para suprir uma parte desta carência. Os poluentes investigados foram PM10, SO2, NO2, CO e O3 e os desfechos envolveram os atendimentos pediátricos de emergência por sintomas respiratórios em três unidades públicas de saúde de Jacarepaguá, entre abril de 2002 e março de 2003. As variáveis de confusão foram a tendência temporal, sazonalidade, temperatura, umidade relativa do ar, precipitação de chuva e infecções respiratórias. Também foram ajustados os efeitos do calendário, isto é, determinados dias do ano que apresentaram comportamentos anormais como feriados e finais de semana. Houve inúmeras falhas no monitoramento de todos os poluentes e devido ao reduzido volume de dados, optou-se por não incluir o SO2 nas análises. Uma vez que os determinantes e as conseqüências clínicas das exposições aos poluentes atmosféricos são bastante distintos nas vias aérias superiores e nas vias aéreas inferiores, um dos estudos verificou a associação dos poluentes do ar com transtornos nestes dois segmentos. Embora de pequena magnitude, somente o O3 apresentou resultado positivo e estatisticamente significativo, tanto com todos os atendimentos de emergência por queixas respiratórias como com os atendimentos motivados por sintomas nas vias aéreas inferiores. O efeito foi no mesmo dia da exposição (lag 0). No outro estudo, investigou-se a associação dos poluentes do ar com os atendimentos de emergência por sintomas de obstrução brônquica. Neste caso, as crianças foram categorizadads em três faixas etárias. Somente as crianças com idades menores que 2 anos tiveram um resultado positivo e estatisticamente significativo, de expressiva magnitude com PM10. Semelhante efeito foi visto com o O3, embora com significado estatístico limítrofe (p<0,06). Também neste estudo o efeito ocorreu no mesmo dia da exposição. Apesar das falhas no monitoramento, nos dois estudos, os parâmetros da poluição ambiental estiveram associados ao aumento do número de atendimentos pediátricos de emergência por motivos respiratórios em Jacarepaguá. Durante o período de estudos, os níveis de todos os poluentes monitorados permaneceram abaixo dos limites recomendados.

Modelagem e simulação da formação de hidrocarbonetos na combustão do gás natural

A exaustão de um veículo de motor a diesel é uma importante fonte de poluentes atmosféricos, pois forma uma matriz complexa composta de poluentes regulados e não regulados pelos órgãos governamentais. Dentre os poluentes regulados podemos citar óxidos de nitrogênio (NOx) e material particulado. Os poluentes não regulados são pouco estudados até hoje e dentre estes encontra-se a classe dos hidrocarbonetos policíclicos aromáticos e seus derivados nitrados (nitro-HPA). Estes são encontrados na exaustão do diesel na forma gasosa ou agregados ao material particulado. Hoje, o interesse em estudos destes compostos vem aumentando, devido às suas atividades carcinogênicas e mutagênicas às quais estão sujeitas as populações dos centros urbanos. O impacto causado pelos nitro-HPA emitidos por motores a ciclo diesel ao ambiente não está ainda completamente estabelecido. Este estudo consiste na modelagem e simulação do processo de combustão de hidrocarbonetos na faixa de C1 a C4 com o objetivo de descrever a formação de compostos aromáticos, principalmente HPA, e óxidos de nitrogênio a partir de modelos cinéticos de combustão propostos na literatura como referência e fazendo uso do software de simulação Kintecus. Este projeto tem como objetivo em longo prazo propor um modelo cinético para combustão do óleo Diesel. Foi iniciada a construção de um modelo cinético de combustão a partir de modelos de hidrocarbonetos simples de C1 a C4, com formação de aromáticos, HPA e óxidos de nitrogênio. Os modelos originais foram avaliados e modificados a fim de estudar como parâmetros do modelo afetam a concentração das espécies de interesse. Foi observado a tendência de formação de benzeno e fulveno em baixas temperaturas e a tendência de formação de antraceno, pireno, fenantreno a temperaturas mais altas. Foi avaliado que a conversão NO-NO2 ocorre em maiores proporções em reações iniciadas a baixas temperaturas, 600 K. Os resultados indicam que propano é o maior responsável por esta conversão. O modelo final obtido resultou da união dos modelos de combustão Hori e Marinov mais inclusão do GRI-Mech 3.0 e reações adicionais de NOx retiradas da base de dados NIST

Temperatura atmosférica e internações hospitalares por doenças cardíacas no município do Rio de Janeiro.

Os efeitos das temperaturas elevadas na saúde humana representam um problema de grande magnitude na saúde pública. A temperatura atmosférica e a poluição do ar são fatores de risco para as doenças crônicas não transmissíveis, em particular as doenças isquêmicas do coração. O estudo teve como objetivo analisar a associação entre a temperatura atmosférica e internações hospitalares por doenças cardíacas isquêmicas no município do Rio de Janeiro entre os anos de 2009 e 2013. Utilizaram-se modelos de séries temporais, via modelos aditivos generalizados, em regressão de Poisson, para testar a hipótese de associação. Como variáveis de controle de confusão foram utilizadas as concentrações de poluentes atmosféricos (ozônio e material particulado) e umidade relativa o ar; utilizou-se método de defasagem simples e distribuída para avaliar o impacto da variação de 1oC nas internações hospitalares diárias. No modelo de defasagem simples foram encontradas associações estatisticamente significativas para as internações por DIC no dia concorrente a exposição ao calor, tanto para a temperatura média quanto para a máxima. No modelo de defasagem distribuída polinomial, essa associação foi observada com 1 e 2 dias de defasagem e no efeito acumulado tanto para a temperatura média quanto para a máxima. Ao estratificarmos por faixa etária, as associações para as internações por DIC e exposição ao calor não foram estatisticamente significativas no modelo de defasagem simples para as temperaturas média e máxima. Em contrapartida, no modelo de defasagem distribuída polinomial, a correlação entre internações por DIC e exposição ao calor foi observada na faixa de 30 a 60 anos no efeito acumulado para a temperatura média; e com defasagem de 1 e 2 dias para 60 anos ou mais de idade para a temperatura média. Estes resultados sugerem associação positiva entre as internações hospitalares por doença cardíaca isquêmica e temperatura na cidade do Rio de Janeiro. Os resultados do presente estudo fornecem informações para o planejamento de investimentos de áreas urbanas climatizadas e para a preparação dos hospitais para receber emergências relacionadas aos efeitos de calor que é uma das consequências mais importantes das mudanças climáticas.