Trace and rare elements and factors at DSDP Hole 71-511

The distribution of paragenetic assemblages of trace and rare elements, as revealed by factor analysis (R-mode, Q-mode), the ratios of elements to Zr and the interpretation of these data in the context of the known mineralogy, lithology, and geology of the region, provide the bases for the outline of the geochemical history of sedimentation in the study area that forms the subject of this chapter. Two stages may be discerned. 1. Late-Middle Jurassic-Early Cretaceous (160-106? Ma). The sediments that accumulated in relatively shallow water (shelf) were predominantly clay, with dispersed sapropelic organic matter, plant fragments, pyrite, admixtures of acid-medium volcanic glass, and epigenetic crystals of gypsum. The bottom water layers of the basin are notably stagnant. The sediments are characterized by higher amounts of V, Zn, Cu, Cr, Rb, and Be associated with organic matter. Lower Cretaceous sediments, separated from those of the Upper Jurassic by a hiatus, accumulated in a deepened and enlarging basin. These Lower Cretaceous deposits are chemically similar to those of the Upper Jurassic, but contain diagenetic concentrations of Zn, Ni, and La. 2. Early-middle Albian (Unit 5)-middle Maestrichtian (1067-66.6Ma). The prevailing regime was that of an open ocean basin that tended to expand and deepen. During the second half of the early-middle Albian, the biogenic components Ba, Sr, and CaCO3 accumulated. By the end of this interval, Ti/Zr values had increased. In conjunction data on mineral composition, they testify to an outburst of basaltoid volcanism related to tectonic activity before an erosional hiatus (late Albian-Cenomanian). At the end of the Cenomanian-Turonian, residual deposits of predominantly clay sediments with relatively high amounts of Ti and Zr and associated rare alkalis (Li, Rb) accumulated. Clay sediments deposited during the Coniacian-Santonian were characterized by higher concentrations of Ti, Zr, Li, and Rb, by diagenetic carbonate phases of Ni, Zn, and La, and by sulphides and Fe-oxides with an admixture of Ni and Co. The latter half of the interval saw the deposition of fine basaltoid volcanoclastic material, diagenetically altered by zeolitization and carbonatization and enriched with Se, Pb, Ti, Sr, Ba, Y, and Yb. Sediments with a similar chemistry accumulated in the Campanian-middle Maestrichtian. Strong current activity preceding a global hiatus at the Mesozoic/Cenozoic boundary is reflected in both lower sedimentation rates and the presence of higher residual concentrations of Ti, Zr, Ba, Sr, and other elements studied in this chapter.

Geochemistry of glass shards in the volcanic ash layers of the Izu-Bonin Arc

To examine the processes and histories of arc volcanism and of volcanism associated with backarc rifting. 130 samples containing igneous glass shards were taken from the Plioccne-Quatemai^ succession on the rift Hank (Site 788) and the Quaternary fill in the basin fill of the Sumisu Rift (Sites 790 and 791). These samples were subsequently analyzed at the University of Illinois at Chicago and Shizuoka University. The oxides determined by electron probe do not account for the total weight of the material; differences between summed oxides and 100% arise from the water contents, probably augmented by minor losses thai result from alkali vaporization during analysis. Weight losses in colorless glasses are up to 9%; those in brown glasses (dacitcs to basalts) arc no more than 4.5%; shards from the rift-flank (possibly caused by prolonged proximity to ihc scafloor) generally have higher values than those from the rift-basin fill How much of the lost water is magmatic, and how much is hydrated is uncertain; however, although the shards absorb potassium, calcium, and magnesium during hydration in the deep sea, they do so only to a minor extent that does not significantly alter their major element compositions. Therefore, the electron-probe results are useful in evaluating the magmatism recorded by the shards. Pre- and syn-rift Izu-Bonin volcanism were overwhelmingly dominated by rhyolile explosions, demonstrating that island arcs may experience significant silicic volcanism in addition to the extensive basaltic and basaltic andestic activity, documented in many arcs since the 1970s, that occurs in conjunction with the andesitic volcanism formerly thought to be dominant. Andesitic eruptions also occurred before rifting, but the andesitic component in our samples is minor. All the pre- and syn-rift rhyolites and andesites belong to the low-alkali island-arc tholeiitic suite, and contrast markedly with the alkali products of Holocene volcanism on the northernmost Mariana Arc that have been attributed to nascent rifting. The Quaternary dacites and andesites atop the rift flank and in the rift-basin fill are more potassic than those of Pliocene age, as a result of assimilation from the upper arc crust, or from variations in degrees of partial melting of the source magmas, or from metasomatic fluids. All the glass layers from the rift-flank samples belong to low-K arc-tholeiitic suites. Half of those in the Pliocene succession are exclusively rhyolitic: the others contain minor admixtures of dacite and andesite, or andesite and either basaltic andesite or basalt. In Contrast, the Quaternary (syn-rift) volcaniclastics atop the rift-flank lack basalt and basaltic andesite shards. These youngest sediments of the rift flank show close compositional affinities with five thick layers of coarse, rhyolitic pumice deposits in the basin fill, the two oldest more silicic than the younger ones. The coarse layers, and most thin ash layers that occur in hemipelagites below and intercalated between them, are low-K rhyolites and therefore probably came from sources in the arc. However, several thin rhyolitic ash beds in the hemipelagites are abnormally enriched in potassium and must have been provided by more distal sources, most likely to the west in Japan. Remarkably, the Pliocene-Pleistocene geochemistry of the volcanic front does not appear to have been influenced by the syn-rift basaltic volcanism only a few kilometers away. Rare, thin layers of basaltic ash near the bases of the rift-basin successions are not derived from the arc. They deviate strongly from trends that the arc-derived glasses display on oxide-oxide plots, and show close affinities to the basalts empted all over the Sumisu Rift during rifting. These basalts, and the basaltic ashes in the basal rift-basin fill, arc compositionally similar to those erupted from mature backarc basins elsewhere.

Results of micropaleontological examination and age of dredge samples collected from the lower slopes of the Kuril Basin, Sea of Okhotsk

An integrated (petrographical and micropaleontological) study of sedimentary cover samples dredged from the lower slopes of the Kuril deep-sea basin was carried out. Pliocene-Pleistocene sediments are mainly represented by tuffaceous sedimentary rocks (tuffites, tuffaceous muds, tuffaceous diatomites, tuffaceous silts, tuffaceous sandstones, etc.). Significant admixtures of pyroclastic matter, especially of volcanic glasses, indicates that sedimentation process was accompanied by explosive volcanism. The data obtained give evidence about intensification of tectonomagmatic regime within the region under study during Pliocene-Pleistocene time. By the beginning of Pliocene, a deep-sea basin with a well-manifested continental and/or island slope and a narrow shelf already existed. Pliocene-Pleistocene deposits accumulated in a cold well-aerated deep-sea basin under oxic conditions and downslope sediment transport.

Lipid analyses of ODP Leg 117 samples

The solvent-extractable organic fractions of sediment samples from six Ocean Drilling Program Leg 117 sites were investigated by gas chromatography and gas chromatography-mass spectrometry. Sediments deposited in the Indus Fan (Site 720) as well as Miocene sediments from the Owen Ridge (Sites 722 and 731) contain almost exclusively organic matter of terrigenous origin. The organic matter in sediments from the Oman Margin (Sites 723, 725, and 728) and in the Pliocene/Pleistocene sections from the Owen Ridge is mainly of a marine origin with variable admixtures of terrigenous material. In these latter samples strong variations of the lipid composition and distribution are noted. However, the interpretation of the relation to potential biological sources is hampered by a lack of information on the possible lipid composition of appropriate organisms.

Calcareous-nannofossil biostratigraphy at DSDP Leg 57 Holes

As a continuation of the Japan Trench transect commenced by DSDP Leg 56, 10 holes were drilled and 273 cores were recovered while occupying Sites 438, 439, 440, and 441 during Leg 57. At Sites 438 and 439, near the top of the trench inner wall, a principal biostratigraphic objective was to establish a Neogene reference section overlying a pronounced acoustic basement thought to represent continental crust extending outward to this slope environment. At Sites 440 and 441, prime objectives were to distinguish, if present, admixtures of accreted oceanic and non-accreted slope materials, and to recognize repeated or missing sections resulting from the accretionary process. This report summarizes the nannofossil biostratigraphy of the upper lower Miocene to Pleistocene sequences of Leg 57 cores. Insufficient occurrences in the lowermost Miocene, presumed upper Oligocene, and upper Cretaceous sequences at Sites 438 and 439 precluded age determinations for these intervals based on nannoliths. All but a few samples from Site 441 were barren, and in general Leg 57 nannofossil assemblages were too modified by dissolution and diagenesis to permit meaningful paleoclimatologic or paleobiogeographic conclusions to be drawn.

Middle Miocene to Quaternary diatoms in the Nankai Trough and Japan Trench

During Leg 87 of the Deep Sea Drilling Project, eleven holes were drilled at Sites 582 and 583 in the Nankai Trough, off Shikoku, southwestern Honshu, and three holes at Site 584 in the Japan Trench, off northeastern Honshu, Japan. In the former area, a low-latitude diatom zone called the Pseudoeunotia doliolus Zone is recognized in thick upper Quaternary sediments, which yield rare but characteristic admixtures of marine planktonic, marine tychopelagic-tobenthic, and nonmarine diatoms. In the latter area, all the sediments recovered contain abundant to common diatoms, allowing recognition of 12 continuous diatom zones from upper Quaternary through lower middle Miocene. Three hiatuses occur in this area around the Pleistocene/Pliocene boundary and in the upper and middle Miocene. In addition, 19 modified diatom zones for a lower Miocene through upper Quaternary interval are proposed. These middle-to-highlatitude zones are numerically coded (NPD1-NPD12) and represent the entire North Pacific. The establishment of these zones is based primarily on Leg 87 data and other DSDP materials and partially on several Japanese subaerial sequences. Correlation of the new zonal framework with previously established frameworks is attempted by the evaluation of operational usefulness of previously used datums. Resting spores of Chaetoceros and its related forms are recorded with specific intent for the first time, and possible ramifications of its frequency variation are presented. Nine new species are proposed: Delphineis sheshukovae Akiba n. sp., Denticulopsis praelauta Akiba and Koizumi n. sp., Kisseleviella ezoensis Akiba n. sp., Nitzschia umaoiensis Akiba n. sp., Thalassiosira jouseae Akiba n. sp., T. praenidulus Akiba n. sp., T. sancettae Akiba n. sp., T. umaoiensis Akiba n. sp., and T. urahoroensis Akiba n. sp. Transfers of systematic positions of the following four taxa are also proposed: Delphineis simonsenii (Mertz) Akiba n. comb., Ikebea tenuis (Brun) Akiba n. comb., Thalassiosira delicata (Barron) Akiba n. stat., and Thalassiothrixrobusta (Schrader) Akiba n. comb.

Study of the Influence of Fines on a Self-Compacting Concrete

The paper presents the results of the tests of a self-compacting concrete made with fines which include Portland cement and three fillers: hornfels, limestone and metakaolin, in a weight proportion between 23% and 45% of the admixtures. The first mix proportions were designed with a high proportion of Portland cement (720-750kg/m3), and are compared to those having a smaller content of cement and more fillers. The results obtained show that the limestone filler percentage should be higher than the hornfels one, and both of them significantly higher than that of the metakaolin so as to facilitate the fluidity and self-compactability. AIso, the higher proportion of fillers causes a rounded porosity in the mixing which has a bearing on better compressive strength results.