Influence of preoperative leg pain and radiculopathy on outcomes in mono-segmental lumbar total disc replacement: results from a nationwide registry.

PURPOSE: Currently, many pre-conditions are regarded as relative or absolute contraindications for lumbar total disc replacement (TDR). Radiculopathy is one among them. In Switzerland it is left to the surgeon's discretion when to operate if he adheres to a list of pre-defined indications. Contraindications, however, are less clearly specified. We hypothesized that, the extent of pre-operative radiculopathy results in different benefits for patients treated with mono-segmental lumbar TDR. We used patient perceived leg pain and its correlation with physician recorded radiculopathy for creating the patient groups to be compared. METHODS: The present study is based on the dataset of SWISSspine, a government mandated health technology assessment registry. Between March 2005 and April 2009, 577 patients underwent either mono- or bi-segmental lumbar TDR, which was documented in a prospective observational multicenter mode. A total of 416 cases with a mono-segmental procedure were included in the study. The data collection consisted of pre-operative and follow-up data (physician based) and clinical outcomes (NASS form, EQ-5D). A receiver operating characteristic (ROC) analysis was conducted with patients' self-indicated leg pain and the surgeon-based diagnosis "radiculopathy", as marked on the case report forms. As a result, patients were divided into two groups according to the severity of leg pain. The two groups were compared with regard to the pre-operative patient characteristics and pre- and post-operative pain on Visual Analogue Scale (VAS) and quality of life using general linear modeling. RESULTS: The optimal ROC model revealed a leg pain threshold of 40 ≤ VAS > 40 for the absence or the presence of "radiculopathy". Demographics in the resulting two groups were well comparable. Applying this threshold, the mean pre-operative leg pain level was 16.5 points in group 1 and 68.1 points in group 2 (p < 0.001). Back pain levels differed less with 63.6 points in group 1 and 72.6 in group 2 (p < 0.001). Pre-operative quality of life showed considerable differences with an 0.44 EQ-5D score in group 1 and 0.29 in group 2 (p < 0.001, possible score range -0.6 to 1). At a mean follow-up time of 8 months, group 1 showed a mean leg pain improvement of 3.6 points and group 2 of 41.1 points (p < 0.001). Back pain relief was 35.6 and 39.1 points, respectively (p = 0.27). EQ-5D score improvement was 0.27 in group 1 and 0.41 in group 2 (p = 0.11). CONCLUSIONS: Patients labeled as having radiculopathy (group 2) do mostly have pre-operative leg pain levels ≥ 40. Applying this threshold, the patients with pre-operative leg pain do also have more severe back pain and a considerably lower quality of life. Their net benefit from the lumbar TDR is higher and they do have similar post-operative back and leg pain levels as well as the quality of life as patients without pre-operative leg pain. Although randomized controlled trials are required to confirm these findings, they put leg pain and radiculopathy into perspective as absolute contraindications for TDR.

Factor analysis of the North American Spine Society outcome assessment instrument: a study based on a spine registry of patients treated with lumbar and cervical disc arthroplasty.

BACKGROUND CONTEXT: Studies involving factor analysis (FA) of the items in the North American Spine Society (NASS) outcome assessment instrument have revealed inconsistent factor structures for the individual items. PURPOSE: This study examined whether the factor structure of the NASS varied in relation to the severity of the back/neck problem and differed from that originally recommended by the developers of the questionnaire, by analyzing data before and after surgery in a large series of patients undergoing lumbar or cervical disc arthroplasty. STUDY DESIGN/SETTING: Prospective multicenter observational case series. PATIENT SAMPLE: Three hundred ninety-one patients with low back pain and 553 patients with neck pain completed questionnaires preoperatively and again at 3 to 6 and 12 months follow-ups (FUs), in connection with the SWISSspine disc arthroplasty registry. OUTCOME MEASURES: North American Spine Society outcome assessment instrument. METHODS: First, an exploratory FA without a priori assumptions and subsequently a confirmatory FA were performed on the 17 items of the NASS-lumbar and 19 items of the NASS-cervical collected at each assessment time point. The item-loading invariance was tested in the German version of the questionnaire for baseline and FU. RESULTS: Both NASS-lumbar and NASS-cervical factor structures differed between baseline and postoperative data sets. The confirmatory analysis and item-loading invariance showed better fit for a three-factor (3F) structure for NASS-lumbar, containing items on "disability," "back pain," and "radiating pain, numbness, and weakness (leg/foot)" and for a 5F structure for NASS-cervical including disability, "neck pain," "radiating pain and numbness (arm/hand)," "weakness (arm/hand)," and "motor deficit (legs)." CONCLUSIONS: The best-fitting factor structure at both baseline and FU was selected for both the lumbar- and cervical-NASS questionnaires. It differed from that proposed by the originators of the NASS instruments. Although the NASS questionnaire represents a valid outcome measure for degenerative spine diseases, it is able to distinguish among all major symptom domains (factors) in patients undergoing lumbar and cervical disc arthroplasty; overall, the item structure could be improved. Any potential revision of the NASS should consider its factorial structure; factorial invariance over time should be aimed for, to allow for more precise interpretations of treatment success.

Early stage disc degeneration does not have an appreciable affect on stiffness and load transfer following vertebroplasty and kyphoplasty.

Vertebroplasty and kyphoplasty have been reported to alter the mechanical behavior of the treated and adjacent-level segments, and have been suggested to increase the risk for adjacent-level fractures. The intervertebral disc (IVD) plays an important role in the mechanical behavior of vertebral motion segments. Comparisons between normal and degenerative IVD motion segments following cement augmentation have yet to be reported. A microstructural finite element model of a degenerative IVD motion segment was constructed from micro-CT images. Microdamage within the vertebral body trabecular structure was used to simulate a slightly (I = 83.5% of intact stiffness), moderately (II = 57.8% of intact stiffness), and severely (III = 16.0% of intact stiffness) damaged motion segment. Six variable geometry single-segment cement repair strategies (models A-F) were studied at each damage level (I-III). IVD and bone stresses, and motion segment stiffness, were compared with the intact and baseline damage models (untreated), as well as, previous findings using normal IVD models with the same repair strategies. Overall, small differences were observed in motion segment stiffness and average stresses between the degenerative and normal disc repair models. We did however observe a reduction in endplate bulge and a redistribution in the microstructural tissue level stresses across both endplates and in the treated segment following early stage IVD degeneration. The cement augmentation strategy placing bone cement along the periphery of the vertebra (model E) proved to be the most advantageous in treating the degenerative IVD models by showing larger reductions in the average bone stresses (vertebral and endplate) as compared to the normal IVD models. Furthermore, only this repair strategy, and the complete cement fill strategy (model F), were able to restore the slightly damaged (I) motion segment stiffness above pre-damaged (intact) levels. Early stage IVD degeneration does not have an appreciable effect in motion segment stiffness and average stresses in the treated and adjacent-level segments following vertebroplasty and kyphoplasty. Placing bone cement in the periphery of the damaged vertebra in a degenerative IVD motion segment, minimizes load transfer, and may reduce the likelihood of adjacent-level fractures.

The Besançon Galaxy Model renewed. I. Constraints on the Galactic thin disc evolution from Tycho data

Context. The understanding of Galaxy evolution can be facilitated by the use of population synthesis models, which allow to test hypotheses on the star formation history, star evolution, as well as chemical and dynamical evolution of the Galaxy. Aims. The new version of the Besanc¸on Galaxy Model (hereafter BGM) aims to provide a more flexible and powerful tool to investigate the Initial Mass Function (IMF) and Star Formation Rate (SFR) of the Galactic disc. Methods. We present a new strategy for the generation of thin disc stars which assumes the IMF, SFR and evolutionary tracks as free parameters. We have updated most of the ingredients for the star count production and, for the first time, binary stars are generated in a consistent way. We keep in this new scheme the local dynamical self-consistency as in Bienayme et al (1987). We then compare simulations from the new model with Tycho-2 data and the local luminosity function, as a first test to verify and constrain the new ingredients. The effects of changing thirteen different ingredients of the model are systematically studied. Results. For the first time, a full sky comparison is performed between BGM and data. This strategy allows to constrain the IMF slope at high masses which is found to be close to 3.0, excluding a shallower slope such as Salpeter"s one. The SFR is found decreasing whatever IMF is assumed. The model is compatible with a local dark matter density of 0.011 M pc−3 implying that there is no compelling evidence for significant amount of dark matter in the disc. While the model is fitted to Tycho2 data, a magnitude limited sample with V<11, we check that it is still consistent with fainter stars. Conclusions. The new model constitutes a new basis for further comparisons with large scale surveys and is being prepared to become a powerful tool for the analysis of the Gaia mission data.

SEM evidence for existence of an apical disc on the scolex of Clestobothrium crassiceps (Rudolphi, 1819): comparative results of various fixation techniques

The scolex of the bothriocephalidean cestode Clestobothrium crassiceps was studied by means of scanning electron microscopy (SEM). The comparative results of various fixation procedures and techniques are presented. The scolex of C. crassiceps is oval to globular and exhibits two deep bothria which appear in the form of two lobes separated by a longitudinal groove. At the apex of the scolex, resembling a beret, an apical disc is present (oval, flattened and with a sinuous edge). Our results are compared with those previously reported in other species of Clestobothrium. This study represents the first report which highlights the presence of an apical disc in the scolex of C. crassiceps. It describes the effects of different procedures applied to our material during preparation and a comparative analysis results obtained using these various methods.

SEM evidence for existence of an apical disc on the scolex of Clestobothrium crassiceps (Rudolphi, 1819): comparative results of various fixation techniques

The scolex of the bothriocephalidean cestode Clestobothrium crassiceps was studied by means of scanning electron microscopy (SEM). The comparative results of various fixation procedures and techniques are presented. The scolex of C. crassiceps is oval to globular and exhibits two deep bothria which appear in the form of two lobes separated by a longitudinal groove. At the apex of the scolex, resembling a beret, an apical disc is present (oval, flattened and with a sinuous edge). Our results are compared with those previously reported in other species of Clestobothrium. This study represents the first report which highlights the presence of an apical disc in the scolex of C. crassiceps. It describes the effects of different procedures applied to our material during preparation and a comparative analysis results obtained using these various methods.

STUDY ON THE SUGAR-ACID RATIO AND RELEVANT METABOLIZING ENZYME ACTIVITIES IN NAVEL ORANGE FRUITS FROM DIFFERENT ECO-REGIONS

ABSTRACT The flavor quality of citrus fruits is largely determined by the sugar-acid ratio, but it remains uncertain how sugar- and/or acid-metabolizing enzymes regulate the sugar-acid ratio of navel oranges and further affect the fruit quality. In the present study, Robertson navel oranges (Citrus sinesis Osb.) were collected from six representative habitats in three eco-regions of Sichuan, China. The changes in the sugar-acid ratio and the activities of sucrose phosphate synthase (SPS), sucrose synthase (SS), cytosolic cio-aconitase (ACO), and isocitrate dehydrogenase (IDH) were examined in navel oranges during fruit development. The results indicated that the sugar-acid ratio of fruits in different eco-regions changed significantly from 150 days after full bloom. The SPS and cytosolic ACO fruit activities had minor changes among different ecoregions throughout the experimental periods, whereas the activities of SS and IDH changed significantly in fruits among three eco-regions. Furthermore, the sugar-acid ratio and the activities of SS in the synthetic direction and IDH were the highest in south subtropics and the lowest in north mid-subtropics, probably due to the effects of climate conditions and/or other relevant eco-factors. It demonstrated that SS in the synthetic direction and IDH were of greater importance in regulating the sugar-acid ratio of navel oranges in different eco-regions, which provided new insights into the factors that determine the flavor quality of navel oranges and valuable data for guiding relevant agricultural practices.

The Besançon Galaxy Model renewed. I. Constraints on the Galactic thin disc evolution from Tycho data

Context. The understanding of Galaxy evolution can be facilitated by the use of population synthesis models, which allow to test hypotheses on the star formation history, star evolution, as well as chemical and dynamical evolution of the Galaxy. Aims. The new version of the Besanc¸on Galaxy Model (hereafter BGM) aims to provide a more flexible and powerful tool to investigate the Initial Mass Function (IMF) and Star Formation Rate (SFR) of the Galactic disc. Methods. We present a new strategy for the generation of thin disc stars which assumes the IMF, SFR and evolutionary tracks as free parameters. We have updated most of the ingredients for the star count production and, for the first time, binary stars are generated in a consistent way. We keep in this new scheme the local dynamical self-consistency as in Bienayme et al (1987). We then compare simulations from the new model with Tycho-2 data and the local luminosity function, as a first test to verify and constrain the new ingredients. The effects of changing thirteen different ingredients of the model are systematically studied. Results. For the first time, a full sky comparison is performed between BGM and data. This strategy allows to constrain the IMF slope at high masses which is found to be close to 3.0, excluding a shallower slope such as Salpeter"s one. The SFR is found decreasing whatever IMF is assumed. The model is compatible with a local dark matter density of 0.011 M pc−3 implying that there is no compelling evidence for significant amount of dark matter in the disc. While the model is fitted to Tycho2 data, a magnitude limited sample with V<11, we check that it is still consistent with fainter stars. Conclusions. The new model constitutes a new basis for further comparisons with large scale surveys and is being prepared to become a powerful tool for the analysis of the Gaia mission data.

On the Use of a Test to Exhaustion Specific to Tennis (TEST) with Ball Hitting by Elite Players

PURPOSE: We aimed to a) introduce a new Test to Exhaustion Specific to Tennis (TEST) and compare performance (test duration) and physiological responses to those obtained during the 20-m multistage shuttle test (MSST), and b) determine to which extent those variables correlate with performance level (tennis competitive ranking) for both test procedures. METHODS: Twenty-seven junior players (8 males, 19 females) members of the national teams of the French Tennis Federation completed MSST and TEST, including elements of the game (ball hitting, intermittent activity, lateral displacement), in a randomized order. Cardiorespiratory responses were compared at submaximal (respiratory compensation point) and maximal loads between the two tests. RESULTS: At the respiratory compensation point oxygen uptake (50.1 +/- 4.7 vs. 47.5 +/- 4.3 mL.min-1.kg-1, p = 0.02), but not minute ventilation and heart rate, was higher for TEST compared to MSST. However, load increment and physiological responses at exhaustion did not differ between the two tests. Players' ranking correlated negatively with oxygen uptake measured at submaximal and maximal loads for both TEST (r = -0.41; p = 0.01 and -0.55; p = 0.004) and MSST (r = -0.38; P = 0.05 and -0.51; p = 0.1). CONCLUSION: Using TEST provides a tennis-specific assessment of aerobic fitness and may be used to prescribe aerobic exercise in a context more appropriate to the game than MSST. Results also indicate that VO2 values both at submaximal and maximal load reached during TEST and MSST are moderate predictors of players competitive ranking.

Ball Bearing Model Performance on Various Sized Rotors with and without Centrifugal and Gyroscopic Forces

Bearing performance signi cantly a ects the dynamic behaviors and estimated working life of a rotating system. A common bearing type is the ball bearing, which has been under investigation in numerous published studies. The complexity of the ball bearing models described in the literature varies. Naturally, model complexity is related to computational burden. In particular, the inclusion of centrifugal forces and gyroscopic moments signi cantly increases the system degrees of freedom and lengthens solution time. On the other hand, for low or moderate rotating speeds, these e ects can be neglected without signi cant loss of accuracy. The objective of this paper is to present guidelines for the appropriate selection of a suitable bearing model for three case studies. To this end, two ball bearing models were implemented. One considers high-speed forces, and the other neglects them. Both models were used to study a three structures, and the simulation results were.

The influence of recreational ball hockey play on cardiovascular risk factors in sedentary males

Introduction: The prevalence of coronary artery disease (CAD) is ever increasing in western industrialized societies. An individuals overall risk for CAD may be quantified by integrating a number of factors including, but not limited to, cardiorespiratory fitness, body composition, blood lipid profile and blood pressure. It might be expected that interventions aimed at improving any or all of these independent factors might improve an individual 's overall risk. To this end, the influence of standard endurance type exercise on cardiorespiratory fitness, body composition, blood lipids and blood pressure, and by extension the reduction of coronary risk factors, is well documented. On the other hand, interval training (IT) has been shown to provide an extremely powerful stimulus for improving indices of cardiorespiratory function but the influence of this training type on coronary risk factors is unknown. Moreover, the vast majority of studies investigating the effects of IT on fitness have used laboratory type training protocols. As a result of this, the influence of participation in interval-type recreational sports on cardiorespiratory fitness and coronary risk factors is unknown. Aims: The aim of the present study was to evaluate the effectiveness of recreational ball hockey, a sport associated with interval-type activity patterns, on indices of aerobic function and coronary risk factors in sedentary men in the approximate age range of 30 - 60 years. Individual risk factors were compiled into an overall coronary risk factor score using the Framingham Point Scale (FPS). Methods: Twenty-four sedentary males (age range 30 - 60) participated in the study. Subject activity level was assessed apriori using questionnaire responses. All subjects (experimental and control) were assessed to have been inactive and sedentary prior to participation in the study. The experimental group (43 ± 3 years; 90 ± 3 kg) (n = 11) participated in one season of recreational ball hockey (our surrogate for IT). Member of this group played a total of 16 games during an 11 week span. During this time, the control group (43 ± 2 years; 89 ± 2 kg) (n = 11) performed no training and continued with their sedentary lifestyle. Prior to and following the ball hockey season, experimental and control subjects were tested for the following variables: 1) cardiorespiratory fitness (as V02 Max) 2) blood lipid profile 3) body composition 5) waist to hip ratio 6) blood glucose levels and 7) blood pressure. Subject V02 Max was assessed using the Rockport submaximal walking test on an indoor track. To assess body composition we determined body mass ratio (BMI), % body fat, % lean body mass and waist to hip ratio. The blood lipid profile included high density lipoprotein, low density lipoprotein and total cholesterol levels; in addition, the ratio of total cholesterol to high density was calculated. Blood triglycerides were also assessed. All data were analyzed using independent t - tests and all data are expressed as mean ± standard error. Statistical significance was accepted at p :S 0.05. Results: Pre-test values for all variables were similar between the experimental and control group. Moreover, although the intervention used in this study was associated with changes in some variables for subjects in the experimental group, subjects in the control group did not exhibit any changes over the same time period. BODY COMPOSITION: The % body fat of experimental subjects decreased by 4.6 ± 0.5%, from 28.1 ± 2.6 to 26.9 ± 2.5 % while that of the control group was unchanged at 22.7 ± 1.4 and 22.2 ± 1.3 %. However, lean body mass of experimental and control subjects did not change at 64.3 ± 1.3 versus 66.1 ± 1.3 kg and 65.5 ± 0.8 versus 64.7 ± 0.8 kg, respectively. In terms of body mass index and waist to hip ratio, neither the experimental nor the control group showed any significant change. Respective values for the waist to hip ratio and body mass index (pre and post) were as follows: 1 ± 0.1 vs 0.9 ± 0.1 (experimental) and 0.9 ± 0.1 versus 0.9 ± 0.1 (controls) while for BMI they were 29 ± 1.4 versus 29 ± 1.2 (experimental) and 26 ± 0.7 vs. 26 ± 0.7 (controls). CARDIORESPIRATORY FITNESS: In the experimental group, predicted values for absolute V02 Max increased by 10 ± 3% (i.e. 3.3 ± 0.1 to 3.6 ± 0.1 liters min -1 while that of control subjects did not change (3.4 ± 0.2 and 3.4 ± 0.2 liters min-I). In terms of relative values for V02 Max, the experimental group increased by 11 ± 2% (37 ± 1.4 to 41 ± 1.4 ml kg-l min-I) while that of control subjects did not change (41 ± 1.4 and 40 ± 1.4 ml kg-l min-I). BLOOD LIPIDS: Compared to pre-test values, post-test values for HDL were decreased by 14 ± 5 % in the experiment group (from 52.4 ± 4.4 to 45.2 ± 4.3 mg dl-l) while HDL data for the control group was unchanged (49.7 ± 3.6 and 48.3 ± 4.1 mg dl-l, respectively. On the other hand, LDL levels did not change for either the experimental or control group (110.2 ± 10.4 versus 112.3 ± 7.1 mg dl-1 and 106.1 ± 11.3 versus 127 ± 15.1 mg dl-1, respectively). Further, total cholesterol did not change in either the experimental or control group (181.3 ± 8.7 mg dl-1 versus 178.7± 4.9 mg dl-l) and 190.7 ± 12.2 versus 197.1 ± 16.1 mg dl-1, respectively). Similarly, the ratio of TC/HDL did not change for either the experimental or control group (3.8 ± 0.4 versus 4.5 ± 0.5 and 4 ± 0.4 versus 4.2 ± 0.4, respectively). Blood triglyceride levels were also not altered in either the experimental or control group (100.3 ± 19.6 versus 114.8 ± 15.3 mg dl-1 and 140 ± 23.5 versus 137.3 ± 17.9 mg dl-l, respectively). BLOOD GLUCOSE: Fasted blood glucose levels did not change in either the experimental or control group. Pre- and post-values for experimental and control groups were 92.5 ± 4.8 versus 93.3 ± 4.3 mg dl-l and 92.3 ± 11.3 versus 93.2 ± 2.6 mg dl-1 , respectively. BLOOD PRESSURE: No aspect of blood pressure was altered in either the experimental or control group. For example, pre- and post-test systolic blood pressures were 131 ± 2 versus 129 ± 2 mmHg (experimental) and 123 ± 2 and 125 ± 2 mmHg (controls), respectively. Pre- and post-test diastolic blood pressures were 84 ± 2 and 83 ± 2 mmHg (experimental) and 81 ± 1 versus 82 ± 1 mmHg, respectively. Similarly, calculated pulse pressure was not altered in the experimental or control as pre- and post-test values were 47 ± 1 versus 47 ± 2 mmlHg and 42 ± 2 versus 43 ± 2 mmHg, respectively. FRAMINGHAM POINT SCORE: The concerted changes reported above produced an increased risk in the Framingham Point Score for the subjects in the experimental group. For example, the pre- and post-test FPS increased from 1.4 ± 0.9 to 2.7 ± 0.7. On the other hand, pre- and post-test scores for the control group were 1.8 ± 1 versus 1.8 ± 0.9. Conclusions: Our data confirms previous studies showing that interval-type exercise is a useful intervention for increasing aerobic fitness. Moreover, the increase in V02 Max we found in response to limited participation in ball hockey (i.e. 16 games) suggests that recreational sport may help reduce this aspect of coronary risk in previously sedentary individual. On the other hand, our results showing little or no positive change in body composition, blood lipids or blood pressures suggest that one season of recreational sport in not in of itself a powerful enough stimulus to reduce the overall risk of coronary artery disease. In light of this, it is recommended that, in addition to participation in recreational sport, the performance of regular physical activity is used as an adjunct to provide a more powerful overall stimulus for decreasing coronary risk factors. LIMITATIONS: The increase in the FPS we found for the experimental group, indicative of an increased risk for coronary disease, was largely due to the large decrease in HDL we observed after compared to above one season of ball hockey. In light of the fact that cardiorespiratory fitness was increased and % body fat was decreased, as well as the fact that other parameters such as blood pressure showed positive (but non statistically significant) trends, the possibility that the decrease in HDL showed by our data was anomalous should be considered. FUTURE DIRECTIONS: The results of this study suggesting that recreational sport may be a potentially useful intervention in the reduction of CAD require to be corroborated by future studies specifically employing 1) more rigorous assessment of fitness and fitness change and 2) more prolonged or frequent participants.

Studies on the Effect of High Energy Ball Milling On the Structural, Electrical and Magnetic Properties of Some Normal Spinets in the Ultrafine Regime

The present work is an attempt to understand the characteristics of high energy ball milling on the structural, electrical and magnetic properties of some normal spinets in the ultra fine regime, Magnetism and magnetic materials have been a fascinating subject for the mankind ever since the discovery of lodestone. Since then, man has been applying this principle of magnetism to build devices for various applications. Magnetism can be classified broadly into five categories. They are diamagnetic, paramagnetic, ferromagnetic antiferromagnetic and ferrimagnetic. Of these, ferro and ferri magnetic materials assume great commercial importance due to their unique properties like appropriate magnetic characteristics, high resistivity and low eddy current losses. The emergence of nanoscience and nanotechnology during the last decade had its impact in the field of magnetism and magnetic materials too. Now, it is common knowledge that materials synthesized in the nanoregime exhibit novel and superlative properties with respect to their coarser sized counterparts in the micron regime. These studies reveal that dielectric properties can be varied appreciably by high-energy ball milling in nanosized zinc ferrites produced by coprecipitation method. A semi conducting behaviour was observed in these materials with the Oxygen vacancies acting as the main charge carrier for conduction, which was produced at the time of coprecipitation and milling. Thus through this study, it was possible to successfully investigate the finite size effects on the structural, electrical and magnetic properties of normal spinels in the ultra fine regime