Population dynamics and stock assessment of the spider prawn, Nematopalaemon tenuipes Henderson along the Maharashtra coast

Nematopalaemon tenuipes is an important component of non-penaeid prawn resources of the northwest coast of India. During 1979-82 period, it contributed 29.9% to the non-penaeid prawn and 5.6% to the total fish landings of Maharashtra. The von Bertalanffy growth parameter L∞, K and t(sub)0 were 77.38 mm, 1.31 and -0.02 year for the males while for the females these parameters were respectively 87.23 mm, 1.30 and -0.01 year. The natural mortality coefficient (M) was 3.54 and 3.52 and the average total mortality coefficient (Z) during the period was 9.09 and 7.79 for the males and females respectively. With the exploitation rates of 0.61 and 0.55 for the males and females during the period, the total stock of the species was 26,270 tonnes and the standing stock was 3,418 tonnes. The maximum sustainable yield (MSY) of the species under the prevailing fishing conditions was 15,744 tonnes which is close to the average yield of 14,726 tonnes from the nets. Hence further increase in effort is not suggested.

Multi-dimensional conditional moment closure modelling applied to a heavy-duty common-rail diesel engine

A multi-dimensional combustion code implementing the Conditional Moment Closure turbulent combustion model interfaced with a well-established RANS two- phase flow field solver has been employed to study a broad range of operating conditions for a heavy duty direct-injection common-rail Diesel engine. These conditions include different loads (25%, 50%, 75% and full load) and engine speeds (1250 and 1830 RPM) and, with respect to the fuel path, different injection timings and rail pressures. A total of nine cases have been simulated. Excellent agreement with experimental data has been found for the pressure traces and the heat release rates, without adjusting any model constants. The chemical mechanism used contains a detailed NOx sub-mechanism. The predicted emissions agree reasonably well with the experimental data considering the range of operating points and given no adjustments of any rate constants have been employed. In an effort to identify CPU cost reduction potential, various dimensionality reduction strategies have been assessed. Furthermore, the sensitivity of the predictions with respect to resolution in particular relating to the CMC grid has been investigated. Overall, the results suggest that the presented modelling strategy has considerable predictive capability concerning Diesel engine combustion without requiring model constant calibration based on experimental data. This is true particularly for the heat release rates predictions and, to a lesser extent, for NOx emissions where further progress is still necessary. © 2009 SAE International.

Effects of gelatin on mechanical properties of hydroxyapatite-gelatin nano-composltes

A biomimetic reactor has been developed to synthesize hydroxyapatite- gelatin (HAP-GEL) nanocomposites that mimic ultra-structures of natural bone. We hypothesize that in the reactor, gelatin concentration controls morphology and packing structures of HAP crystals. To test the hypothesis, three types of mechanical tests were conducted, including nanoindentation, compression, and fracture tests. Nanoindentation tests in conjunction with computer modeling were used to assess effects on gelatin-induced microstructures of HAP. The results showed that increasing gelatin content increased both the plane strain modulus and the fracture toughness. The gelatin appeared to shorten the HAP crystal distance, which consolidated the internal structure of the composite and made the material more rigid. The fracture toughness KIC increased partially due to the effect of fiber bridging between gelatin molecules. The highest fracture toughness (1.12 MPa·1/2) was equivalent to that of pure hydroxyapatite. The compressive strength of the HAP-GEL (107.7±26.8 MPa) was, however, less sensitive to microstructural changes and was within the range of natural cortical bone (human 170 MPa, pig: 100 MPa). The compression strength was dominated by void inclusions while the nanoindentation response reflected ultra-structural arrangement of the crystals. The gelatin concentration is likely to modify crystal arrangement as demonstrated in TEM experiments but not void distribution at macroscopic levels. © 2006 Materials Research Society.

Effects of stocking density on growth and survival of Mystus gulio in nursery ponds

A study on the effect of stocking density on growth and survival of nona tengra (Mystus gulio) was carried out in brackishwater earthen nursery ponds (2 decimal each) for a period of 42 days. Five-day old captive bred tengra post-larvae (ABL: 4.53±0.83 mm and ABW:3.33 mg) were stocked at four different densities of 200/m² (Treatment-1), 250/m² (Treatment-2), 350/m² (Treatment-3) and 450/m² (Treatment-4). Fries were fed twice a day with a mixture of fine rice bran, mustard oil cake and fishmeal at the ratio of 2:1:1. The specific growth rate (SGR) of larvae did not vary significantly (p>0.05) between T1 (5.096% mg/day) and T2 (5.08% mg/day), but it was found significantly (p<0.05) higher from T3 (4.98% mg/day) and T4 (4.91% mg/day), respectively. The final survival rates of 89.25±5.41% in T1 and 88.72±6.09% in T2 were found similar (p>0.05), but significantly higher (p<0.05) than those of, 76.20±4.77% in T3 and 70.34±5.71% in T4. The results indicate that 5-day old hatchery bred nona tengra post-larvae can be nursed in earthen pond at a stocking density of 200-250/m².

Glycine receptor activation regulates short-term plasticity in CA1 area of hippocampal slices of rats

Functional glycine receptors (GlyRs) are enriched in the hippocampus, but their roles in synaptic transmission are unclear. In this study, we examined the effect of GlyR activation on paired-pulse stimulation of the whole-cell postsynaptic currents (PSCs)

饵料鱼大小对乌鳢捕食的影响

测量了乌鳢口裂形态,以泥鳅(Misgurnus anguillicaudatus)作为饵料鱼,估算了不同规格乌鳢的摄食率,研究了饵料鱼大小对乌鳢捕食的影响。乌鳢口宽(MW,cm)、口高(MH,cm)和口面积(MA,cm2)与其全长(TL,cm)的回归方程分别为:MW=1.65e0.0242TL;MH=1.64e0.022TL;MA=2.12e0.0462TL。当水温保持在22~23℃时,4个规格组的乌鳢对泥鳅的摄食率无显著的差别(ANOVA,P>0.05),均值为1.68%。乌鳢对泥鳅的捕食具有明显的大小

Cd~(2+)和Cu~(2+)对美人蕉的氧化胁迫及抗性机理研究

通过测定植物的丙二醛(MDA)含量、酸溶性SH含量以及两种抗氧化酶(超氧化物歧化酶SOD和愈创木酚过氧化物酶GPX)的酶活,研究了重金属镉(Cd)和铜(Cu)对美人蕉(Cannaindica Linn.)的氧化胁迫。结果表明,20μmol·L~(-1)和100μmol·L~(-1)的Cd~(2+)和Cu~(2+)均使其根部MDA含量显著增加,但除了100μmol·L~(-1)的Cd~(2+),叶部MDA含量无明显变化。与Cu~(2+)相比,Cd~(2+)能引起植物根部GSH的明显提高,并能诱导PCs的产生

狐尾藻断枝上不定根与芽发生的初步研究

本文比较研究了不同节位和不同长度狐尾藻断枝的不定根和芽的发生时间及其形成幼苗的频率(本文中的幼苗指最终形成了不定根和芽的断枝)。结果表明:在狐尾藻顶芽以下叶已完全展开的茎段部分,不定根和芽的发生时间呈现出随着节位下降而逐渐缩短的趋势,而幼苗形成频率呈现出随着节位下降而增高的趋势;断枝的长度(用断枝所含的茎节数表示)对不定根和芽的发生时间及幼苗形成频率也有明显的影响。断枝长度增加,不定根和芽的发生时间缩短,形成幼苗的频率升高。另外与抛掷方式相比,扦插延长多节断枝的不定根和芽形成时间,但提高幼苗的形成频率。这

HLA-DRB1、-DQB1基因多态性与食管鳞癌遗传关联性

目的　从基因水平探讨食管鳞癌HLA DRB1 , DQB1等位基因的遗传易感性 ,以阐述其免疫遗传学特征。方法　运用序列特异性引物聚合酶链反应技术 ,检测无亲缘关系湖北汉族健康人 1 36例、食管鳞癌患者 42例的HLA DRB1 , DQB1等位基因。结果　湖北汉族人食管鳞癌患者与正常人比较 ,HLA DRB1 0 90 1等位基因分布频率显著增高 (0 .2 50 0比 0 .1 397,P =0 .0 2 8,OR =2 .0 53 ,病因分数 =0 .1 2 82 ) ,HLA DQB1 0 30

Lock-in and quasiperiodicity in a forced hydrodynamically self-excited jet

The ability of hydrodynamically self-excited jets to lock into strong external forcing is well known. Their dynamics before lock-in and the specific bifurcations through which they lock in, however, are less well known. In this experimental study, we acoustically force a low-density jet around its natural global frequency. We examine its response leading up to lock-in and compare this to that of a forced van der Pol oscillator. We find that, when forced at increasing amplitudes, the jet undergoes a sequence of two nonlinear transitions: (i) from periodicity to T{double-struck}2 quasiperiodicity via a torus-birth bifurcation; and then (ii) from T{double-struck}2 quasiperiodicity to 1:1 lock-in via either a saddle-node bifurcation with frequency pulling, if the forcing and natural frequencies are close together, or a torus-death bifurcation without frequency pulling, but with a gradual suppression of the natural mode, if the two frequencies are far apart. We also find that the jet locks in most readily when forced close to its natural frequency, but that the details contain two asymmetries: the jet (i) locks in more readily and (ii) oscillates more strongly when it is forced below its natural frequency than when it is forced above it. Except for the second asymmetry, all of these transitions, bifurcations and dynamics are accurately reproduced by the forced van der Pol oscillator. This shows that this complex (infinite-dimensional) forced self-excited jet can be modelled reasonably well as a simple (three-dimensional) forced self-excited oscillator. This result adds to the growing evidence that open self-excited flows behave essentially like low-dimensional nonlinear dynamical systems. It also strengthens the universality of such flows, raising the possibility that more of them, including some industrially relevant flames, can be similarly modelled. © 2013 Cambridge University Press.

The acoustic analogy in an annular duct with swirling mean flow

This paper is concerned with modelling the effects of swirling flow on turbomachinery noise. We develop an acoustic analogy to predict sound generation in a swirling and sheared base flow in an annular duct, including the presence of moving solid surfaces to account for blade rows. In so doing we have extended a number of classical earlier results, including Ffowcs Williams & Hawkings' equation in a medium at rest with moving surfaces, and Lilley's equation for a sheared but non-swirling jet. By rearranging the Navier-Stokes equations we find a single equation, in the form of a sixth-order differential operator acting on the fluctuating pressure field on the left-hand side and a series of volume and surface source terms on the right-hand side; the form of these source terms depends strongly on the presence of swirl and radial shear. The integral form of this equation is then derived, using the Green's function tailored to the base flow in the (rigid) duct. As is often the case in duct acoustics, it is then convenient to move into temporal, axial and azimuthal Fourier space, where the Green's function is computed numerically. This formulation can then be applied to a number of turbomachinery noise sources. For definiteness here we consider the noise produced downstream when a steady distortion flow is incident on the fan from upstream, and compare our results with those obtained using a simplistic but commonly used Doppler correction method. We show that in all but the simplest case the full inclusion of swirl within an acoustic analogy, as described in this paper, is required. © 2013 Cambridge University Press.