1000 resultados para 671299 Computer hardware and electronic equipment not elsewhere classified
Resumo:
A microgrid may be supplied from inertial (rotating type) and non-inertial (converter-interfaced) distributed generators (DGs). However the dynamic response of these two types of DGs is different. Inertial DGs have a slower response due to their governor characteristics while non inertial DGs have the ability to respond very quickly. The focus of this paper is to propose better controls using droop characteristics to improve the dynamic interaction between different DG types in an autonomous microgrid. The transient behavior of DGs in the microgrid is investigated during the DG synchronization and load changes. Power sharing strategies based on frequency and voltage droop are considered for DGs. Droop control strategies are proposed for DGs to improve the smooth synchronization and dynamic power sharing minimizing transient oscillations in the microgrid. Simulation studies are carried out on PSCAD for validation.
Resumo:
This paper presents channel measurements and weather data collection experiments conducted in a rural environment for an innovative Multi-User-Single-Antenna (MUSA) MIMO-OFDM technology, proposed for rural areas. MUSA MIMO-OFDM uplink channels are established by placing six user terminals (UT) around one access point (AP). Generated terrain profiles and relative received power plots are presented based on the experimental data. According to the relative received signal, MUSA-MIMO-OFDM uplink channels experience temporal fading. Moreover, the correlation between the relative received power and weather variables are presented. Results show that all weather variables exhibit a negative average correlation with received power. Wind speed records the highest average negative correlation coefficient of -0.35. Local maxima of negative correlation, ranging from 0.49 to 0.78, between the weather variables and relative received signals were registered between 5-6 a.m. The highest measured correlation (-0.78) of this time of the day was exhibited by wind speed. These results show the extend of time variation effects experienced by MUSA-MIMO-OFDM channels deployed in rural environments.
Resumo:
Protection of a distribution network in the presence of distributed generators (DGs) using overcurrent relays is a challenging task due to the changes in fault current levels and reverse power flow. Specifically, in the presence of current limited converter interfaced DGs, overcurrent relays may fail to isolate the faulted section either in grid connected or islanded mode of operation. In this paper, a new inverse type relay is presented to protect a distribution network, which may have several DG connections. The new relay characteristic is designed based on the measured admittance of the protected line. The relay is capable of detecting faults under changing fault current levels. The relay performance is evaluated using PSCAD simulation and laboratory experiments.
Resumo:
A microgrid provides economical and reliable power to customers by integrating distributed resources more effectively. Islanded operation enables a continuous power supply for loads during a major grid disturbance. Reliability of a microgrid can be further increased by forming a mesh configuration. However, the protection of mesh microgrids is a challenging task. In this paper, protection schemes are discussed using current differential protection of a microgrid. The protection challenges associated with bi-directional power flow, meshed configuration, changing fault current level due to intermittent nature of DGs and reduced fault current level in an islanded mode are considered in proposing the protection solutions. Relay setting criterion and current transformer (CT) selection guidelines are also discussed. The results are verified using MATLAB calculations and PSCAD simulations.
Resumo:
Sequences with optimal correlation properties are much sought after for applications in communication systems. In 1980, Alltop (\emph{IEEE Trans. Inf. Theory} 26(3):350-354, 1980) described a set of sequences based on a cubic function and showed that these sequences were optimal with respect to the known bounds on auto and crosscorrelation. Subsequently these sequences were used to construct mutually unbiased bases (MUBs), a structure of importance in quantum information theory. The key feature of this cubic function is that its difference function is a planar function. Functions with planar difference functions have been called \emph{Alltop functions}. This paper provides a new family of Alltop functions and establishes the use of Alltop functions for construction of sequence sets and MUBs.
Resumo:
Information and communication technologies (ICTs) had occupied their position on knowledge management and are now evolving towards the era of self-intelligence (Klosterman, 2001). In the 21st century ICTs for urban development and planning are imperative to improve the quality of life and place. This includes the management of traffic, waste, electricity, sewerage and water quality, monitoring fire and crime, conserving renewable resources, and coordinating urban policies and programs for urban planners, civil engineers, and government officers and administrators. The handling of tasks in the field of urban management often requires complex, interdisciplinary knowledge as well as profound technical information. Most of the information has been compiled during the last few years in the form of manuals, reports, databases, and programs. However frequently, the existence of these information and services are either not known or they are not readily available to the people who need them. To provide urban administrators and the public with comprehensive information and services, various ICTs are being developed. In early 1990s Mark Weiser (1993) proposed Ubiquitous Computing project at the Xerox Palo Alto Research Centre in the US. He provides a vision of a built environment which digital networks link individual residents not only to other people but also to goods and services whenever and wherever they need (Mitchell, 1999). Since then the Republic of Korea (ROK) has been continuously developed national strategies for knowledge based urban development (KBUD) through the agenda of Cyber Korea, E-Korea and U-Korea. Among abovementioned agendas particularly the U-Korea agenda aims the convergence of ICTs and urban space for a prosperous urban and economic development. U-Korea strategies create a series of U-cities based on ubiquitous computing and ICTs by a means of providing ubiquitous city (U-city) infrastructure and services in urban space. The goals of U-city development is not only boosting the national economy but also creating value in knowledge based communities. It provides opportunity for both the central and local governments collaborate to U-city project, optimize information utilization, and minimize regional disparities. This chapter introduces the Korean-led U-city concept, planning, design schemes and management policies and discusses the implications of U-city concept in planning for KBUD.
Resumo:
This paper examines three functions of music technology in the study of music. Firstly, as a tool, secondly, as an instrument and, lastly, as a medium for thinking. As our societies become increasingly embroiled in digital media for representation and communication, our philosophies of music education need to adapt to integrate these developments while maintaining the essence of music. The foundation of music technology in the 1990s is the digital representation of sound. It is this fundamental shift to a new medium with which to represent sound that carries with it the challenge to address digital technology and its multiple effects on music creation and presentation. In this paper I suggest that music institutions should take a broad and integrated approach to the place of music technology in their courses, based on the understanding of digital representation of sound and these three functions it can serve. Educators should reconsider digital technologies such as synthesizers and computers as music instruments and cognitive amplifiers, not simply as efficient tools.
Resumo:
A teaching and learning development project is currently under way at Queens-land University of Technology to develop advanced technology videotapes for use with the delivery of structural engineering courses. These tapes consist of integrated computer and laboratory simulations of important concepts, and behaviour of structures and their components for a number of structural engineering subjects. They will be used as part of the regular lectures and thus will not only improve the quality of lectures and learning environment, but also will be able to replace the ever-dwindling laboratory teaching in these subjects. The use of these videotapes, developed using advanced computer graphics, data visualization and video technologies, will enrich the learning process of the current diverse engineering student body. This paper presents the details of this new method, the methodology used, the results and evaluation in relation to one of the structural engineering subjects, steel structures.
Resumo:
This book disseminates current information pertaining to the modulatory effects of foods and other food substances on behavior and neurological pathways and, importantly, vice versa. This ranges from the neuroendocrine control of eating to the effects of life-threatening disease on eating behavior. The importance of this contribution to the scientific literature lies in the fact that food and eating are an essential component of cultural heritage but the effects of perturbations in the food/cognitive axis can be profound. The complex interrelationship between neuropsychological processing, diet, and behavioral outcome is explored within the context of the most contemporary psychobiological research in the area. This comprehensive psychobiology- and pathology-themed text examines the broad spectrum of diet, behavioral, and neuropsychological interactions from normative function to occurrences of severe and enduring psychopathological processes
Resumo:
In this globalized environment, Taiwanese firms have been very successful in achieving growth via international market expansion. In particular, the Taiwanese electronics industry has shown a dynamism lacking in comparable industries around the world. However, in recent years there has been a move by many of the larger Taiwanese manufacturing firms to outsource their manufacturing to low-cost producers such as China in order to remain competitive. Conversely, most Taiwanese small- to medium-sized enterprises (SMEs) have retained their production facilities in Taiwan. These SMEs seek to expand their sales beyond the domestic market by employing an export strategy, making a significant socioeconomic contribution to the domestic and regional economies. This paper highlights the key dimensions such as enhancing factors (benefits/advantages), inhibiting factors (barriers/costs), and managerial factors (characteristics/commitment) that play an important role in the internationalization of SMEs located within the Taiwanese electronics industry. A logistic regression model is used to predict the probability of a firm being an exporter.
Resumo:
Objective: To describe the reported impact of Pandemic (H1N1) 2009 on EDs, so as to inform future pandemic policy, planning and response management. Methods: This study comprised an issue and theme analysis of publicly accessible literature, data from jurisdictional health departments, and data obtained from two electronic surveys of ED directors and ED staff. The issues identified formed the basis of policy analysis and evaluation. Results: Pandemic (H1N1) 2009 had a significant impact on EDs with presentation for patients with ‘influenza-like illness’ up to three times that of the same time in previous years. Staff reported a range of issues, including poor awareness of pandemic plans, patient and family aggression, chaotic information flow to themselves and the public, heightened stress related to increased workloads and lower levels of staffing due to illness, family care duties and redeployment of staff to flu clinics. Staff identified considerable discomfort associated with prolonged times wearing personal protective equipment. Staff believed that the care of non-flu patients was compromised during the pandemic as a result of overwork, distraction from core business and the difficulties associated with accommodating infectious patients in an environment that was not conducive. Conclusions: This paper describes the breadth of the impact of pandemics on ED operations. It identifies a need to address a range of industrial, management and procedural issues. In particular, there is a need for a single authoritative source of information, the re-engineering of EDs to accommodate infectious patients and organizational changes to enable rapid deployment of alternative sources of care.
Resumo:
This book develops tools and techniques that will help urban residents gain access to urban computing. Metaphorically speaking, it is taking computing to the street by giving the general public – rather than just researchers and professionals – the power to leverage available city infrastructure and create solutions tailored to their individual needs. It brings together five chapters that are based on presentations given at the Street Computing Workshop held on 24 November 2009 in Melbourne in conjunction with the Australian Computer-Human Interaction Conference (OZCHI 2009). This book focuses on applying urban informatics, urban and community sensing and open application programming interfaces (APIs) to the public space through the delivery of online services, on demand and in real time. It then offers a case study of how the city of Singapore has harnessed the potential of an online infrastructure so that residents and visitors can access services electronically. This book was published as a special issue of the Journal of Urban Technology, 19(2), 2012.