High-Speed Solid-Rotor Induction Machine – Electromagnetic Calculation and Design

Within the latest decade high-speed motor technology has been increasingly commonly applied within the range of medium and large power. More particularly, applications like such involved with gas movement and compression seem to be the most important area in which high-speed machines are used. In manufacturing the induction motor rotor core of one single piece of steel it is possible to achieve an extremely rigid rotor construction for the high-speed motor. In a mechanical sense, the solid rotor may be the best possible rotor construction. Unfortunately, the electromagnetic properties of a solid rotor are poorer than the properties of the traditional laminated rotor of an induction motor. This thesis analyses methods for improving the electromagnetic properties of a solid-rotor induction machine. The slip of the solid rotor is reduced notably if the solid rotor is axially slitted. The slitting patterns of the solid rotor are examined. It is shown how the slitting parameters affect the produced torque. Methods for decreasing the harmonic eddy currents on the surface of the rotor are also examined. The motivation for this is to improve the efficiency of the motor to reach the efficiency standard of a laminated rotor induction motor. To carry out these research tasks the finite element analysis is used. An analytical calculation of solid rotors based on the multi-layer transfer-matrix method is developed especially for the calculation of axially slitted solid rotors equipped with wellconducting end rings. The calculation results are verified by using the finite element analysis and laboratory measurements. The prototype motors of 250 – 300 kW and 140 Hz were tested to verify the results. Utilization factor data are given for several other prototypes the largest of which delivers 1000 kW at 12000 min-1.

The initial oxidation of transition metal surfaces

Due to their numerous novel technological applications ranging from the example of exhaust catalysts in the automotive industry to the catalytic production of hydro- gen, surface reactions on transition metal substrates have become to be one of the most essential subjects within the surface science community. Although numerous applications exist, there are many details in the different processes that, after many decades of research, remain unknown. There are perhaps as many applications for the corrosion resistant materials such as stainless steels. A thorough knowledge of the details of the simplest reactions occuring on the surfaces, such as oxidation, play a key role in the design of better catalysts, or corrosion resistant materials in the future. This thesis examines the oxidation of metal surfaces from a computational point of view mostly concentrating on copper as a model material. Oxidation is studied from the initial oxidation to the oxygen precovered surface. Important parameters for the initial sticking and dissociation are obtained. The saturation layer is thoroughly studied and the calculated results arecompared with available experimental results. On the saturated surface, some open questions still remain. The present calculations demonstrate, that the saturated part of the surface is excluded from being chemically reactive towards the oxygen molecules. The results suggest, that the reason for the chemical activity of the saturated surface is due to a strain effect occuring between the saturated areas of the surface.

Facilitating coordination improvement efforts in cross-functional process development programs

Business process improvement is a common approach in increasing the effectiveness of an organization. It can be seen as an effort to increase coordination between units. Process improvement has proved to be challenging, and most management consultation firms facilitate organizations in this kind of initiatives. Cross-functional improvement is one of the main areas for internal consultants as well. However, the needs, challenges and means of cross-functional help have been rarely discussed in the literature. The objective of this thesis is on one hand to present a conceptual and descriptive framework to help understand the challenges of facilitating coordination improvement efforts in cross-functional improvement programs, and on the other hand to develop and test feasible solutions for some facilitation situations. The research questions are: 1. Why and in what kind of situations do organizations need help in developing coordination in cross-functional processes? 2. How can a facilitator help organizations in improving coordination to develop cross-functional processes? The study consists of two parts. The first part is an overview of the dissertation, and the second part comprises six research publications. The theoretical background for the study are the differentiation causing challenges in cross-functional settings, the coordination needed to improve processes, change management principles, methods and tools, and consultation practises. Three of the publications introduce tools for helping in developing prerequisites, planning responsibilities and supporting learning during the cross-functional program. The three other papers present frameworks to help understand and analyse the improvement situation. The main methodological approaches used in this study are design science research, action research and case research. The research data has been collected from ten cases representing different kinds of organizations, processes and developing situations. The data has been collected mainly by observation, semi-structured interviews and questionnaires. The research contributes to the rare literature combining coordination theories and process improvement practises. It also provides additional understanding of a holistic point of view in process improvement situations. The most important contribution is the addition to the theories of facilitating change in process improvement situations. From the managerial point of view, this study gives advice to managers and consultants in planning and executing cross-functional programs. The main factors increasing the need for facilitation are the challenges for differentiation, challenges of organizational change in general, and the novelty of initiatives and improvement practices concerning process development. Organizations need help in creating the prerequisites to change, in planning initiatives, easing conflict management and collaboration between groups, as well as supporting the learning of cross-functional improvement. The main challenges of facilitation are combining the different roles as a consultant, maintaining the ownership for the improvement project with the client, and supporting learning in the client organization.

Flexible Multibody Simulation Approach in the Dynamic Analysis of Bone Strains Activity

The objective of this study is to show that bone strains due to dynamic mechanical loading during physical activity can be analysed using the flexible multibody simulation approach. Strains within the bone tissue play a major role in bone (re)modeling. Based on previous studies, it has been shown that dynamic loading seems to be more important for bone (re)modeling than static loading. The finite element method has been used previously to assess bone strains. However, the finite element method may be limited to static analysis of bone strains due to the expensive computation required for dynamic analysis, especially for a biomechanical system consisting of several bodies. Further, in vivo implementation of strain gauges on the surfaces of bone has been used previously in order to quantify the mechanical loading environment of the skeleton. However, in vivo strain measurement requires invasive methodology, which is challenging and limited to certain regions of superficial bones only, such as the anterior surface of the tibia. In this study, an alternative numerical approach to analyzing in vivo strains, based on the flexible multibody simulation approach, is proposed. In order to investigate the reliability of the proposed approach, three 3-dimensional musculoskeletal models where the right tibia is assumed to be flexible, are used as demonstration examples. The models are employed in a forward dynamics simulation in order to predict the tibial strains during walking on a level exercise. The flexible tibial model is developed using the actual geometry of the subject’s tibia, which is obtained from 3 dimensional reconstruction of Magnetic Resonance Images. Inverse dynamics simulation based on motion capture data obtained from walking at a constant velocity is used to calculate the desired contraction trajectory for each muscle. In the forward dynamics simulation, a proportional derivative servo controller is used to calculate each muscle force required to reproduce the motion, based on the desired muscle contraction trajectory obtained from the inverse dynamics simulation. Experimental measurements are used to verify the models and check the accuracy of the models in replicating the realistic mechanical loading environment measured from the walking test. The predicted strain results by the models show consistency with literature-based in vivo strain measurements. In conclusion, the non-invasive flexible multibody simulation approach may be used as a surrogate for experimental bone strain measurement, and thus be of use in detailed strain estimation of bones in different applications. Consequently, the information obtained from the present approach might be useful in clinical applications, including optimizing implant design and devising exercises to prevent bone fragility, accelerate fracture healing and reduce osteoporotic bone loss.

Russian Enterprise Restructuring - the Effect of Privatisation and Market Liberalisation on the Performance of Large Enterprises

The fundamental question in the transitional economies of the former Eastern Europe and Soviet Union has been whether privatisation and market liberalisation have had an effect on the performance of former state-owned enterprises. This study examines the effect of privatisation, capital market discipline, price liberalisation and international price exposure on the restructuring of large Russian enterprises. The performance indicators are sales, profitability, labour productivity and stock market valuations. The results do not show performance differences between state-owned and privatised enterprises. On the other hand, the expansion of the de novo private sector has been strong. New enterprises have significantly higher sales growth, profitability and labour productivity. However, the results indicate a diminishing effect of ownership. The international stock market listing has a significant positive effect on profitability, while the effect of domestic stock market listing is insignificant. The international price exposure has a significant positive increasing effect on profitability and labour productivity. International enterprises have higher profitability only when operating on price liberalised markets, however. The main results of the study are strong evidence on the positive effects of international linkages on the enterprise restructuring and the higher than expected role of new enterprises in the Russian economy.

Supplier's position in project marketing networks

The present study explores relationships between project marketers and their customers in project marketing context. The purpose of the study is to increase the understanding on supplier’s position in project marketing networks. Project marketing is representing a high volume in the international business, and the industrial network approach and the project marketing research cannot fully explain a supplier’s position in project marketing networks. Increased knowledge on project networks can also contribute to industrial marketing research more generally. Data for the present study was collected firstly during the pilot case study from project buyers in the paper and the steel industry in interviews. Secondly an entire project marketing case concerning a steel industry case was used as a data source. The data included interviews, correspondence between the supplier and the buyer, and project documents. The data of the pilot case was analysed with contents analysis, and in the case a deeper analysis based on the developed Stage Dimension framework was used. Supplier’s position in project marketing networks is a hierarchical and dynamic concept including a supplier’s position on the highest level. The dimensions of the position concept are the intermediate level, and the dimensions are based on the underlying components. Supplier’s position is composed from four organization related dimensions, and two individual actor related dimensions. The composition of the supplier’s position varies during the project marketing process, and consequently the relative importance of the dimensions is changing over the process. Supplier’s position in project marketing networks is shaped by incremental and radical changes. Radical changes are initiated by critical events. The study contributes to the research of industrial networks and project marketing. The theoretical contribution of the study is threefold: firstly it proposes a structure of the position concept in project marketing networks, secondly it proposes the Position Stage Dimension Component (PSDC) model for the development of supplier’s position during the project marketing process, and thirdly the study widens the critical event concept to cover the project marketing process both on the organizational and individual level. In addition to the theoretical contributions there are several managerial implications for planning and implementing marketing strategies in the project context.

The use of future-oriented knowledge in regional innovation processes: Research on knowledge generation, transfer and conversion

The importance of the regional level in research has risen in the last few decades and a vast literature in the fields of, for instance, evolutionary and institutional economics, network theories, innovations and learning systems, as well as sociology, has focused on regional level questions. Recently the policy makers and regional actors have also began to pay increasing attention to the knowledge economy and its needs, in general, and the connectivity and support structures of regional clusters in particular. Nowadays knowledge is generally considered as the most important source of competitive advantage, but even the most specialised forms of knowledge are becoming a short-lived resource for example due to the accelerating pace of technological change. This emphasizes the need of foresight activities in national, regional and organizational levels and the integration of foresight and innovation activities. In regional setting this development sets great challenges especially in those regions having no university and thus usually very limited resources for research activities. Also the research problem of this dissertation is related to the need to better incorporate the information produced by foresight process to facilitate and to be used in regional practice-based innovation processes. This dissertation is a constructive case study the case being Lahti region and a network facilitating innovation policy adopted in that region. Dissertation consists of a summary and five articles and during the research process a construct or a conceptual model for solving this real life problem has been developed. It is also being implemented as part of the network facilitating innovation policy in the Lahti region.

Validation of plant dynamic model by online and laboratory measurements – a tool to predict online COD loads out of production of mechanical printing papers

COD discharges out of processes have increased in line with elevating brightness demands for mechanical pulp and papers. The share of lignin-like substances in COD discharges is on average 75%. In this thesis, a plant dynamic model was created and validated as a means to predict COD loading and discharges out of a mill. The assays were carried out in one paper mill integrate producing mechanical printing papers. The objective in the modeling of plant dynamics was to predict day averages of COD load and discharges out of mills. This means that online data, like 1) the level of large storage towers of pulp and white water 2) pulp dosages, 3) production rates and 4) internal white water flows and discharges were used to create transients into the balances of solids and white water, referred to as “plant dynamics”. A conversion coefficient was verified between TOC and COD. The conversion coefficient was used for predicting the flows from TOC to COD to the waste water treatment plant. The COD load was modeled with similar uncertainty as in reference TOC sampling. The water balance of waste water treatment was validated by the reference concentration of COD. The difference of COD predictions against references was within the same deviation of TOC-predictions. The modeled yield losses and retention values of TOC in pulping and bleaching processes and the modeled fixing of colloidal TOC to solids between the pulping plant and the aeration basin in the waste water treatment plant were similar to references presented in literature. The valid water balances of the waste water treatment plant and the reduction model of lignin-like substances produced a valid prediction of COD discharges out of the mill. A 30% increase in the release of lignin-like substances in the form of production problems was observed in pulping and bleaching processes. The same increase was observed in COD discharges out of waste water treatment. In the prediction of annual COD discharge, it was noticed that the reduction of lignin has a wide deviation from year to year and from one mill to another. This made it difficult to compare the parameters of COD discharges validated in plant dynamic simulation with another mill producing mechanical printing papers. However, a trend of moving from unbleached towards high-brightness TMP in COD discharges was valid.

Many valued algebraic structures as measures of comparison

This thesis studies the properties and usability of operators called t-norms, t-conorms, uninorms, as well as many valued implications and equivalences. Into these operators, weights and a generalized mean are embedded for aggregation, and they are used for comparison tasks and for this reason they are referred to as comparison measures. The thesis illustrates how these operators can be weighted with a differential evolution and aggregated with a generalized mean, and the kinds of measures of comparison that can be achieved from this procedure. New operators suitable for comparison measures are suggested. These operators are combination measures based on the use of t-norms and t-conorms, the generalized 3_-uninorm and pseudo equivalence measures based on S-type implications. The empirical part of this thesis demonstrates how these new comparison measures work in the field of classification, for example, in the classification of medical data. The second application area is from the field of sports medicine and it represents an expert system for defining an athlete's aerobic and anaerobic thresholds. The core of this thesis offers definitions for comparison measures and illustrates that there is no actual difference in the results achieved in comparison tasks, by the use of comparison measures based on distance, versus comparison measures based on many valued logical structures. The approach has been highly practical in this thesis and all usage of the measures has been validated mainly by practical testing. In general, many different types of operators suitable for comparison tasks have been presented in fuzzy logic literature and there has been little or no experimental work with these operators.

Trigger and data link system for CMS Resistive Plate Chambers at the LHC accelerator

The purpose of the work was to realize a high-speed digital data transfer system for RPC muon chambers in the CMS experiment on CERN’s new LHC accelerator. This large scale system took many years and many stages of prototyping to develop, and required the participation of tens of people. The system interfaces to Frontend Boards (FEB) at the 200,000-channel detector and to the trigger and readout electronics in the control room of the experiment. The distance between these two is about 80 metres and the speed required for the optic links was pushing the limits of available technology when the project was started. Here, as in many other aspects of the design, it was assumed that the features of readily available commercial components would develop in the course of the design work, just as they did. By choosing a high speed it was possible to multiplex the data from some the chambers into the same fibres to reduce the number of links needed. Further reduction was achieved by employing zero suppression and data compression, and a total of only 660 optical links were needed. Another requirement, which conflicted somewhat with choosing the components a late as possible was that the design needed to be radiation tolerant to an ionizing dose of 100 Gy and to a have a moderate tolerance to Single Event Effects (SEEs). This required some radiation test campaigns, and eventually led to ASICs being chosen for some of the critical parts. The system was made to be as reconfigurable as possible. The reconfiguration needs to be done from a distance as the electronics is not accessible except for some short and rare service breaks once the accelerator starts running. Therefore reconfigurable logic is extensively used, and the firmware development for the FPGAs constituted a sizable part of the work. Some special techniques needed to be used there too, to achieve the required radiation tolerance. The system has been demonstrated to work in several laboratory and beam tests, and now we are waiting to see it in action when the LHC will start running in the autumn 2008.

The Pursuit of Efficient Copyright Licensing : How Some Rights Reserved Attempts to Solve the Problems of All Rights Reserved

This dissertation analyses the growing pool of copyrighted works, which are offered to the public using Creative Commons licensing. The study consist of analysis of the novel licensing system, the licensors, and the changes of the "all rights reserved" —paradigm of copyright law. Copyright law reserves all rights to the creator until seventy years have passed since her demise. Many claim that this endangers communal interests. Quite often the creators are willing to release some rights. This, however, is very difficult to do and needs help of specialized lawyers. The study finds that the innovative Creative Commons licensing scheme is well suited for low value - high volume licensing. It helps to reduce transaction costs on several le¬vels. However, CC licensing is not a "silver bullet". Privacy, moral rights, the problems of license interpretation and license compatibility with other open licenses and collecting societies remain unsolved. The study consists of seven chapters. The first chapter introduces the research topic and research questions. The second and third chapters inspect the Creative Commons licensing scheme's technical, economic and legal aspects. The fourth and fifth chapters examine the incentives of the licensors who use open licenses and describe certain open business models. The sixth chapter studies the role of collecting societies and whether two institutions, Creative Commons and collecting societies can coexist. The final chapter summarizes the findings. The dissertation contributes to the existing literature in several ways. There is a wide range of prior research on open source licensing. However, there is an urgent need for an extensive study of the Creative Commons licensing and its actual and potential impact on the creative ecosystem.

Drivers and Barriers of Collaboration in the Value Chain of Paperboard-Packed Consumer Goods

Value chain collaboration has been a prevailing topic for research, and there is a constantly growing interest in developing collaborative models for improved efficiency in logistics. One area of collaboration is demand information management, which enables improved visibility and decrease of inventories in the value chain. Outsourcing of non-core competencies has changed the nature of collaboration from intra-enterprise to cross-enterprise activity, and this together with increasing competition in the globalizing markets have created a need for methods and tools for collaborative work. The retailer part in the value chain of consumer packaged goods (CPG) has been studied relatively widely, proven models have been defined, and there exist several best practice collaboration cases. The information and communications technology has developed rapidly, offering efficient solutions and applications to exchange information between value chain partners. However, the majority of CPG industry still works with traditional business models and practices. This concerns especially companies operating in the upstream of the CPG value chain. Demand information for consumer packaged goods originates at retailers' counters, based on consumers' buying decisions. As this information does not get transferred along the value chain towards the upstream parties, each player needs to optimize their part, causing safety margins for inventories and speculation in purchasing decisions. The safety margins increase with each player, resulting in a phenomenon known as the bullwhip effect. The further the company is from the original demand information source, the more distorted the information is. This thesis concentrates on the upstream parts of the value chain of consumer packaged goods, and more precisely the packaging value chain. Packaging is becoming a part of the product with informative and interactive features, and therefore is not just a cost item needed to protect the product. The upstream part of the CPG value chain is distinctive, as the product changes after each involved party, and therefore the original demand information from the retailers cannot be utilized as such – even if it were transferred seamlessly. The objective of this thesis is to examine the main drivers for collaboration, and barriers causing the moderate adaptation level of collaborative models. Another objective is to define a collaborative demand information management model and test it in a pilot business situation in order to see if the barriers can be eliminated. The empirical part of this thesis contains three parts, all related to the research objective, but involving different target groups, viewpoints and research approaches. The study shows evidence that the main barriers for collaboration are very similar to the barriers in the lower part of the same value chain; lack of trust, lack of business case and lack of senior management commitment. Eliminating one of them – the lack of business case – is not enough to eliminate the two other barriers, as the operational model in this thesis shows. The uncertainty of the future, fear of losing an independent position in purchasing decision making and lack of commitment remain strong enough barriers to prevent the implementation of the proposed collaborative business model. The study proposes a new way of defining the value chain processes: it divides the contracting and planning process into two processes, one managing the commercial parts and the other managing the quantity and specification related issues. This model can reduce the resistance to collaboration, as the commercial part of the contracting process would remain the same as in the traditional model. The quantity/specification-related issues would be managed by the parties with the best capabilities and resources, as well as access to the original demand information. The parties in between would be involved in the planning process as well, as their impact for the next party upstream is significant. The study also highlights the future challenges for companies operating in the CPG value chain. The markets are becoming global, with toughening competition. Also, the technology development will most likely continue with a speed exceeding the adaptation capabilities of the industry. Value chains are also becoming increasingly dynamic, which means shorter and more agile business relationships, and at the same time the predictability of consumer demand is getting more difficult due to shorter product life cycles and trends. These changes will certainly have an effect on companies' operational models, but it is very difficult to estimate when and how the proven methods will gain wide enough adaptation to become standards.

Offshore Sourcing in Software Development: Case Studies of Finnish-Russian Cooperation

The study examines international cooperation in product development in software development organisations. The software industry is known for its global nature and knowledge-intensity, which makes it an interesting setting to examine international cooperation in. Software development processes are increasingly distributed worldwide, but for small or even medium-sized enterprises, typical for the software industry, such distribution of operations is often possible only in association with crossing the company’s boundaries. The strategic decision-making of companies is likely to be affected by the characteristics of the industry, and this includes decisions about cooperation or sourcing. The objective of this thesis is to provide a holistic view on factors affecting decisions about offshore sourcing in software development. Offshore sourcing refers to a cooperative mode of offshoring, where a firm does not establish its own presence in a foreign country, but utilises a local supplier. The study examines product development activities that are distributed across organisational and geographical boundaries. The objective can be divided into two subtopics: general reasons for international cooperation in product development and particular reasons for cooperation between Finnish and Russian companies. The focus is on the strategic rationale at the company level, in particular in small and medium-sized enterprises. The theoretical discourse of the study builds upon the literature on international cooperation and networking, with particular focus on cooperation with foreign suppliers and within product development activities. The resource-based view is also discussed, as heterogeneity and interdependency of the resources possessed by different firms are seen as factors motivating international cooperation. Strategically, sourcing can be used to access resources possessed by an industrial network, to enhance the product development of a firm, or to optimise its cost structure. In order to investigate the issues raised by the theoretical review, two empirical studies on international cooperation in software product development have been conducted. The emphasis of the empirical part of the study is on cooperation between Finnish and Russian companies. The data has been gathered through four case studies on Finnish software development organisations and four case studies on Russian offshore suppliers. Based on the material from the case studies, a framework clarifying and grouping the factors that influence offshore sourcing decisions has been built. The findings indicate that decisions regarding offshore sourcing in software development are far more complex than generally assumed. The framework provides a holistic view on factors affecting decisions about offshore sourcing in software development, capturing the multidimensionality of motives for entering offshore cooperation. Four groups of factors emerged from the data: A) strategy-related aspects, B) aspects related to resources and capabilities, C) organisation-related aspects, and D) aspects related to the entrepreneur or management. By developing a holistic framework of decision factors, the research offers in-depth theoreticalunderstanding of offshore sourcing rationale in product development. From the managerial point of view, the proposed framework sums up the issues that a firm should pay attention to when contemplating product development cooperation with foreign suppliers. Understanding different components of sourcing decisions can lead to improved preconditions for strategising and engaging in offshore cooperation. A thorough decisionmaking process should consider all the possible benefits and risks of product development cooperation carefully.

Knowledge sharing in virtual communities

The Internet has transformed the scope, boundaries and dynamics of social and economic interactions. It is argued to have broadened the notion of the community from physical, colocated groups towards collectives that are able to transcend time and space, i.e. virtual communities. Even if virtual communities have been on the academic agenda for a couple of decades, there is still surprisingly little research on knowledge sharing within them. In addition, prior research has largely neglected the complex dynamics between Internet-based communication channels and the surrounding communities in which they are embedded. This thesis aims at building a better understanding of knowledge sharing supported by conversational technologies in intra-organisational virtual communities and external virtual communities supporting relationships with customers. The focus is thus on knowledge sharing in types of virtual communities that seem to be of relevance to business organisations. The study consists of two parts. The first part introduces the research topic and discusses the overall results. The second part comprises seven research publications. Qualitative research methods are used throughout the study. The results of the study indicate that investigation of the processes of knowledge sharing in virtual communities requires a socio-technical perspective, combining the individual, social and technological levels, and understanding the interplay between them. It is claimed that collective knowledge in virtual communities creates the enabling structure for knowledge sharing, and forms the invisible structure of the community on the basis of which it operates. It consists of a shared context, social capital and a unique community culture. The Internet does not inevitably erode social interaction: it seems that supporting social relationships by means of communication technology is a matter of quantity rather than quality. In order to provide access to external knowledge and expertise, firms need to open themselves up to an array of Internet-based conversations, and to consider the relevance of virtual communities to their businesses.

Modeling reaction kinetics and mass transfer in ozonation in water solutions

This dissertation is based on four articles dealing with modeling of ozonation. The literature part of this considers some models for hydrodynamics in bubble column simulation. A literature review of methods for obtaining mass transfer coefficients is presented. The methods presented to obtain mass transfer are general models and can be applied to any gas-liquid system. Ozonation reaction models and methods for obtaining stoichiometric coefficients and reaction rate coefficients for ozonation reactions are discussed in the final section of the literature part. In the first article, ozone gas-liquid mass transfer into water in a bubble column was investigated for different pH values. A more general method for estimation of mass transfer and Henry’s coefficient was developed from the Beltrán method. The ozone volumetric mass transfer coefficient and the Henry’s coefficient were determined simultaneously by parameter estimation using a nonlinear optimization method. A minor dependence of the Henry’s law constant on pH was detected at the pH range 4 - 9. In the second article, a new method using the axial dispersion model for estimation of ozone self-decomposition kinetics in a semi-batch bubble column reactor was developed. The reaction rate coefficients for literature equations of ozone decomposition and the gas phase dispersion coefficient were estimated and compared with the literature data. The reaction order in the pH range 7-10 with respect to ozone 1.12 and 0.51 the hydroxyl ion were obtained, which is in good agreement with literature. The model parameters were determined by parameter estimation using a nonlinear optimization method. Sensitivity analysis was conducted using object function method to obtain information about the reliability and identifiability of the estimated parameters. In the third article, the reaction rate coefficients and the stoichiometric coefficients in the reaction of ozone with the model component p-nitrophenol were estimated at low pH of water using nonlinear optimization. A novel method for estimation of multireaction model parameters in ozonation was developed. In this method the concentration of unknown intermediate compounds is presented as a residual COD (chemical oxygen demand) calculated from the measured COD and the theoretical COD for the known species. The decomposition rate of p-nitrophenol on the pathway producing hydroquinone was found to be about two times faster than the p-nitrophenol decomposition rate on the pathway producing 4- nitrocatechol. In the fourth article, the reaction kinetics of p-nitrophenol ozonation was studied in a bubble column at pH 2. Using the new reaction kinetic model presented in the previous article, the reaction kinetic parameters, rate coefficients, and stoichiometric coefficients as well as the mass transfer coefficient were estimated with nonlinear estimation. The decomposition rate of pnitrophenol was found to be equal both on the pathway producing hydroquinone and on the path way producing 4-nitrocathecol. Comparison of the rate coefficients with the case at initial pH 5 indicates that the p-nitrophenol degradation producing 4- nitrocathecol is more selective towards molecular ozone than the reaction producing hydroquinone. The identifiability and reliability of the estimated parameters were analyzed with the Marcov chain Monte Carlo (MCMC) method. @All rights reserved. No part of the publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior permission of the author.