质谱动力学方法在手性分析中的应用

质谱动力学方法采用电喷雾离子化的方法获得含有手性化合物、并由过渡金属离子连接的复合物,然后进行碰撞诱导解离,两种解离途径的解离速率与混合物的对映体组成相关,进而可进行手性化合物光学纯度的测定。与其它常见手性测定方法相比,质谱动力学方法无需湿法化学处理和色谱分离步骤,操作简单、快速、灵敏,因而被广泛应用。本文对质谱动力学方法用于手性化合物对映体过量值测定的原理、改进方法、应用领域进行了评述。

Deoxyribonucleic acid sample preparation in scanning probe microscope

The process of deoxyribonucleio acid (DNA) sample preparation in scanning tunneling microscope (STM) and atomic force microscope (AFM) is reviewed. The main discussions are devoted to the methods, advantages or drawbacks and improvement of the DNA sample's immobilization and spreading.

扫描探针显微技术中脱氧核糖核酸样品的设备

评述了近年来原子力显微镜和扫描隧道显微镜应用于脱氧核糖核酸研究领域的样品制备过程。主要内容涉及基底的选择与处理、样品的固定与展开方法、优缺点以及改进过程

Induction of triploidy in large yellow crocker Pseudosciaena crocea (Richardson, 1846): effects of pressure shocks and growth performance in the first rearing year

The precociously sexual maturation in large yellow crocker Pseudosciaena crocea has become a serious problem. In an attempt to solve this problem, the production of sterile triploids could be an effective strategy. In this study, triploid P. crocea was obtained by subjecting fertilized eggs to pressure shock. Flow-cytometry analysis was used to assess ploidy level. In terms of triploid rate and hatching rate, the optimal conditions of pressure shock for triploidy induction in P. crocea were 7500 psi for 3 min shock at 3 min after fertilization at 20 degrees C. With the application of these parameters, 100% triploid fish were produced. During the first rearing year, triploid P. crocea had a similar growth performance compared with its diploid counterpart before the age of 8 months and showed a significant advantage at the age of 10 and 12 months in body weight and body length (P < 0.05). At the age of 12 months, the carcass weight of triploids was markedly higher than that of diploid control, and gonadal somatic index was significantly lower than that of their diploid control. During the first rearing year, survival in triploid group was 76.44%, inferior to its diploid control (83.21%).

Mineral chemistry and its genetic significance of olivine in Cenozoic basalts from the South China Sea

We dredged lots of Cenozoic basalts from areas covered from the northern sub-slope to the southern sub- slope of the South China Sea. Based on the study on mineral chemistry of clinopyroxenes in these Cenozoic hasalts, this paper indicates that pyroxenes are mostly enstatite and a few of augite, sahlite and Ca-rich pyroxene. Pyroxene microlite has higher content in, Ca, Ti and Fe than pyroxene phenocryst, it may reflect that the evolution trend of host magma of pyroxene is coincidence with that of alkali rock series. The depth of magma chambers which calculated from equilibrium temperatures and pressures between clinopyroxene and melt are as follows, that of magma of tephrite is about 49km, that of magma of trachybasalt is about 25km, and that of magma of basalt is about 15km. Correspondingly, Equilibrium temperatures( K) of three types rocks mentioned above gradually decrease from 1535 1498 to 1429 to 1369. By using discriminant plot which developed from pyroxene and alkali discriminant diagram of host rock, Cenozoic basalt from the South China Sea belongs to intraplate alkali basalt. The results suggest that alkali basalt series in the study area may be the products of continuous evolution of mantle plume, which result from some physical and chemistry process including partial melting and fractional crystallization of mantle plume during the course of its ascent to the surface.

南海新生代碱性玄武岩的特征及其地球动力学意义

南海是西太平洋最大的边缘海之一，位于欧亚板块、印-澳板块以及太平洋板块之间。南海海底扩张停止(15.5Ma, Briais et al., 1993) 后的板内火山作用，影响着中国南部、中南半岛、大洋基底和分裂的微大陆片段的广大地区。对南海新生代玄武岩进行地球化学研究，不仅对于理解南海板内火山作用的深部地幔过程有着重要意义，而且对南海形成演化及含油气盆地形成的深部动力学机制有着深远意义。 南海新生代玄武岩K-Ar/Ar-Ar年龄为3.8-7.9Ma, 表明为晚中新世以来的岩浆活动产物，与周边地区的碱性火山岩在年龄上的一致性。岩石学特征表明，南海新生代玄武岩的矿物组合为橄榄石、单斜辉石、斜长石，与特征的碱性玄武岩的矿物组合一致。由橄榄石所计算的南海底潜在地幔温度(Tp)平均值为1661℃, 暗示南海地区下的地幔可能存在热量异常，为海南地区存在地幔柱的观点提供了证据。单斜辉石富钙、钛，由单斜辉石-熔体平衡温压计计算的岩浆房深度分别为：碱玄岩岩浆房深度约49km（对应压力为1.46～1.48 GPa）；粗面玄武岩岩浆房约25km（对应压力为0.76 GPa）；玄武岩岩浆房约15km（对应压力为0.44GPa）。由碱玄岩→粗面玄武岩→玄武岩，平衡温度(K)依次降低:从1535～1498→1429→1369。由斜长石微晶所计算的岩浆喷出地表的温度为989℃。 主量元素特征表明，岩石类型主要为碱玄岩，有少量的粗面玄武岩和玄武岩，属于碱性系列。微量元素方面，大离子亲石元素(LILE)以及高场强元素（HFSE）特别是Nb、Ta、Ti、Y等元素均呈现富集现象，Yb、Sc、Sr以及K、U、Th等生热元素相对亏损，微量元素及稀土元素分布岩石类似板内OIB微量元素的全球平均值。同位素地球化学研究表明，源区存在两个混合端员并具Dupal Pb异常：一个为DMM，位于软流圈或岩石圈地幔中；另一个为EM2源区，可能来自位于核-幔边界处的海南地幔柱而非大陆底岩石圈地幔。研究表明，南半球Dupal异常不存在全球范围内的地区专属性，本区存在的Dupal异常与南半球Dupal异常可能不存在联系。在南海新生代玄武岩的成因过程中，海南地幔柱在为岩石圈地幔的部分熔融作用提供所需的热量同时，也在物质上作出了贡献。南海盆新生代碱性玄武岩由不同程度的部分熔融作用，以及岩浆在上升期间或者在高位岩浆房中的橄榄石等矿物分离结晶作用所形成，同时还可能发生了堆晶作用。构造环境判别表明，玄武岩浆在上升到地表过程中几乎未受到地壳混染。 南海新生代玄武岩的地球化学研究表明，在玄武质岩浆的深部地幔演化过程中，海南地幔柱可能起着重要的作用。通过引入海南岛地幔柱这个概念，本文建立了一个新的有关南海形成演化的初步的概念性模型：（1）50-32Ma，印度洋板块-欧亚板块碰撞及其所导致的太平洋板块后退的综合效应为南海地区提供了一个伸展环境，此伸展环境为地幔柱物质的上升提供了通道；（2）32-21Ma，当地幔柱柱头到达软流圈时, 通过侧向物质流开始同扩张中心发生相互作用，促进了南海的扩张，并在26-24Ma期间发生了洋脊重新就位事件，使扩张中心从原来的18°N附近(即现今西北海盆的中心)调整到15.5°N附近（即现今的东部亚盆）；（3）21-15.5Ma, 随着地幔柱效应的逐渐增强，热点-洋脊相互作用越来越强烈，在大约21Ma发生了洋脊的再次重新就位事件，诱发了西南海盆的扩张；（4）15.5-现在，由于印澳板块前缘与巽他大陆碰撞，使得南海大约在15.5Ma停止扩张,并沿着南沙海槽及吕宋海沟向菲律宾岛弧及巴拉望地块之下俯冲，而南海热点继续活动，在地表处直到第四纪还有碱性玄武岩喷出。

南黄海浮游植物的固碳强度与污染物胁迫下海水碳源/汇格局的变化

本论文在解析了南黄海生态环境的基础上，首次研究揭示了浮游植物固碳强度的年际变化及生态反馈机制，获得了东中国近海浮游植物固碳强度及对海域源/汇格局的影响程度；同时，用室内模拟实验探讨了重金属和有机污染物胁迫下海水无机碳体系和源汇格局的变化过程，获得了一些新的认识。主要结论如下： 1. 南黄海浮游植物固碳强度具有明显的时空变化特征，与海域光照、流系和水团变化、海水磷的浓度等因素密切相关，并在一定程度上决定海区碳源/汇的性质。2005年秋季浮游植物日固碳量达9.5万吨，1983-2005年间，南黄海浮游植物固碳强度有降低的趋势，与海水关键营养盐－磷的限制有关。东中国近海浮游植物年总固碳量约为2.2亿吨，约占全球近海浮游植物的年固碳量的2.0%。 在综合分析秋季南黄海水文、化学、生物背景的基础上，系统阐明了海域浮游植物固碳体系的生物地球化学机制。结果表明，2005年秋季南黄海浮游植物固碳强度，即初级生产力变化在 97−701 mgC m-2 d-1之间，平均为307 mg C m-2 d-1；与其关系比较密切的环境因子为海水透明度、盐度、pH、氨氮 (NH4-N)、磷酸盐 (PO4-P) 以及Chl a。在这些因素中，PO4-P对初级生产力的影响最大，显然11月份南黄海的磷是浮游植物生长的限制因子，次之的影响因素是Chl a和NH4-N。 对南黄海源汇格局的研究发现，如果除去涌升流较为活跃的站位（A9、B7、B8、B9、C8、C9、 D9和A1），2005年秋季表层海水pCO2与浮游植物固碳强度明显负相关（r=-0.8，n=23, p<0.001）。在南黄海东部浮游植物固碳强度较高，pCO2值较低；而在西部海区浮游植物固碳强度较低的区域，其pCO2值较高。碳源/汇转折点浮游植物固碳强度为230 mgC m-2 d-1，即小于此值，海区为大气二氧化碳的源，反之为汇，并且CO2汇区浮游植物固碳强度平均值约是CO2源区的2倍多；浮游植物固碳作用，在某一时间和空间尺度内，基本决定了海区的源汇格局。估算结果显示，东中国近海浮游植物固碳量约为222×106t a-1，约为东中国近海通过海－气界面总表观碳汇强度每年1369万吨的16.2倍，仅就浮游植物的年固碳量而言，东中国近海约占全球近海浮游植物的年固碳量的2.0%。 研究揭示了近年来南黄海浮游植物固碳强度具有区域与年际变化明显这一显著特点。一般，近岸区（由黄海沿岸水和表层水控制）内，光照是浮游植物固碳的主要限制因子；从2001年后的大多数年份中，中央区（黄海冷水团控制）的浮游植物固碳强度均与磷酸盐浓度显著正相关，但与氮浓度的相关性不大，说明南黄海生态系统普遍存在着磷限制而非氮限制；混合区终年受黄、东海混合水控制，受到光照条件和营养盐浓度同时影响。根据本次观测所获数据，结合以前研究者的调查资料，我们发现从1983年到2005年，南黄海浮游植物优势种由Bacillariophyta变为Pyrrophyta，浮游植物细胞丰度和Chl a明显下降，浮游植物固碳强度几乎下降了二分之一 （由569.50 mgC m-2 d-1下降至306.83 mgC m-2 d-1），说明南黄海在世界边缘海固碳过程中的作用在降低。经过相关水质参数及生态环境变化的分析，以上现象是对关键营养盐磷的限制以及光限制响应的缘故。此外，研究还发现，由于南黄海初级生产者产量下降所引起的一些生态反馈信息，如浮游动物固碳量的下降和鱼类产量的锐减。 2. 室内模拟实验显示，重金属（铅、铜、镉和锌）及有机污染物（乙醇、丙酮、尿素和多灭磷）对水体生物固碳体系有重要影响，较低浓度时可提高水体的固碳能力，相应水体中的DIC、HCO3-和 Pco2 与对照组相比都明显下降 (P<0.01)；当污染物达到一定浓度后，水体生物的固碳能力明显下降，其有机碳可降解转化为无机碳。当污染物小于转折浓度水体为大气二氧化碳的汇，反之为源。 水体固碳体系对于不同种类、不同浓度的污染物质所表现的受胁迫情况不同，低浓度各污染物（包括重金属和有机污染物）添加组中（对于重金属为0.1和1µmol•L-1，醇和酮分别为<0.5 mol L-1和<0.75 mol L-1），藻干重及固碳量均要大于初始值，说明适量的外源污染可能会促进藻类生长，提高水体的固碳能力，相应水体中的DIC、HCO3- 和PCO2与对照组相比都明显下降 (P<0.01)。当污染物达到一定浓度后，由于其毒害作用，使得水体内生物的固碳能力下降，甚至分解并转化为无机碳，从会引起DIC、HCO3- 和PCO2含量的升高，其含量上升幅度会因固碳体系对不同种类污染物耐受程度的差异而不同。对于尿素和多灭磷，二者浓度分别达到80和20mgL-1时，水体中二氧化碳各参数仍呈现下降趋势，说明在该浓度范围内，大型藻类（如石莼）仍可利用添加物中的氮和磷，将其做为氮源或磷源，促进水体总固碳量的增加。 污染物胁迫对水体碳源汇能力及格局可起到一定的调控作用，与污染物的浓度密切相关，污染物存在着一转折浓度，分别为5µmol L-1（铜）、20µmol L-1（镉） 0.75mol L-1（酮），当污染物添加小于转折浓度并排除其他影响因素时，水体表现为大气CO2的汇，并且适量的增加污染物浓度会使海洋碳汇能力有所增强；而当污染物超出转折浓度时，水体成为CO2的源，其CO2的释放量是随着污染物浓度的增加而增大。对与研究中其他种类的污染物，在实验室设计范围内，水体始终表现为大气CO2的汇。

Effects of La3+ on the active oxygen-scavenging enzyme activities in cucumber seedling leaves

The effects of La3+ on the antioxidant enzyme activities and the relative indices of cellular damage in cucumber seedling leaves were studied. When cucumber seedlings were treated with low concentrations of LaCl3 (0.002 and 0.02 mM), peroxidase (PO) activity increased, and catalase (CAT) activity was similar to that of control leaves at 0.002 mM La3+ and increased at 0.02 mM La3+, whereas superoxide dismutase (SOD) activity did not change significantly. The increase in the contents of chlorophyll (including chlorophylls a and b), carotenoids in parallel with the decrease in the level of malondialdehyde (MDA) suggested that low concentration of La3+ promoted plant growth. However, except the increase in SOD activity at 2 mM La3+, CAT and PO activities and the contents of pigments decreased at high concentrations of La3+ (0.2 and 2 mM), leading to the increase of MDA content and the inhibition of plant growth. It is suggested that lanthanum ion is involved in the regulation of active oxygen-scavenging enzyme activities during plant growth.

小襟翼对自治式水下机器人潜浮运动的影响

无动力大纵倾角的下潜和上浮方式对自治式水下机器人具有很大的意义．但是这种潜浮方式却无法满足自治式水下机器人潜浮位置范围及航向控制的要求．采用在稳定翼上加装小襟翼的方法，即可以解决这一难题．本文介绍了小襟翼对自治式水下机器人无动力潜浮运动轨迹的影响，并通过自治式水下机器人的运动方程，结合“ＣＲ－０１”６０００ｍ自治式水下机器人的深海试验结果，对这一影响作了定性地分析．为通过试验找出最佳小襟翼提供了理论基础

Intellectual Property in Computing: (How) Should Software Be Protected? An Industry Perspective

The future of the software industry is today being shaped in the courtroom. Most discussions of intellectual property to date, however, have been frames as debates about how the existing law --- promulgated long before the computer revolution --- should be applied to software. This memo is a transcript of a panel discussion on what forms of legal protection should apply to software to best serve both the industry and society in general. After addressing that question we can consider what laws would bring this about.

SOUND PROPAGATION AND SCATTERING IN BUBBLY LIQUIDS

In the ocean, natural and artificial processes generate clouds of bubbles which scatter and attenuate sound. Measurements have shown that at the individual bubble resonance frequency, sound propagation in this medium is highly attenuated and dispersive. Theory to explain this behavior exists in the literature, and is adequate away from resonance. However, due to excessive attenuation near resonance, little experimental data exists for comparison. An impedance tube was developed specifically for exploring this regime. Using the instrument, unique phase speed and attenuation measurements were made for void fractions ranging from 6.2 × 10^−5 to 2.7 × 10^−3 and bubble sizes centered around 0.62 mm in radius. Improved measurement speed, accuracy and precision is possible with the new instrument, and both instantaneous and time-averaged measurements were obtained. Behavior at resonance was observed to be sensitive to the bubble population statistics and agreed with existing theory, within the uncertainty of the bubble population parameters. Scattering from acoustically compact bubble clouds can be predicted from classical scattering theory by using an effective medium description of the bubbly fluid interior. Experimental verification was previously obtained up to the lowest resonance frequency. A novel bubble production technique has been employed to obtain unique scattering measurements with a bubbly-liquid-filled latex tube in a large indoor tank. The effective scattering model described these measurements up to three times the lowest resonance frequency of the structure.

First principles modelling of nucleation and growth during atomic layer deposition onto III-V substrates

Atomic layer deposition (ALD) is now used in semiconductor fabrication lines to deposit nanometre-thin oxide films, and has thus enabled the introduction of high-permittivity dielectrics into the CMOS gate stack. With interest increasing in transistors based on high mobility substrates, such as GaAs, we are investigating the surface treatments that may improve the interface characteristics. We focus on incubation periods of ALD processes on III-V substrates. We have applied first principles Density Functional Theory (DFT) to investigate detailed chemistry of these early stages of growth, specifically substrate and ALD precursor interaction. We have modelled the ‘clean-up’ effect by which organometallic precursors: trimethylaluminium (TMA) or hafnium and titanium amides clean arsenic oxides off the GaAs surface before ALD growth of dielectric commences and similar effect on Si3N4 substrate. Our simulations show that ‘clean-up’ of an oxide film strongly depends on precursor ligand, its affinity to the oxide and the redox character of the oxide. The predominant pathway for a metalloid oxide such as arsenic oxide is reduction, producing volatile molecules or gettering oxygen from less reducible oxides. An alternative pathway is non-redox ligand exchange, which allows non-reducible oxides (e.g. SiO2) to be cleaned-up. First principles study shows also that alkylamides are more susceptible to decomposition rather than migration on the oxide surface. This improved understanding of the chemical principles underlying ‘clean-up’ allows us to rationalize and predict which precursors will perform the reaction. The comparison is made between selection of metal chlorides, methyls and alkylamides precursors.

Local likelihood smoothing of sample extremes

Trends in sample extremes are of interest in many contexts, an example being environmental statistics. Parametric models are often used to model trends in such data, but they may not be suitable for exploratory data analysis. This paper outlines a semiparametric approach to smoothing example extremes, based on local polynomial fitting of the generalized extreme value distribution and related models. The uncertainty of fits is assessed by using resampling methods. The methods are applied to data on extreme temperatures and on record times for the womens 3000m race.

Computer modelling analysis of the globtop's effects on aluminium wirebond reliability

In power electronics modules, heavy aluminium wires, i.e. wire diameters greater than 100 microns, are bonded to the active semiconductor devices and conductor metallization to form electric circuits of the power electronic module. Due to the high currents that may flow through these wires, a single connection usually contains several wires and thus, a large number of wires are used in a power electronics module. Under normal operation or test condition, a significant amount of stresses and strains induced in the wire and bonding interfaces, resulting in failure over time. In this paper, computer modelling techniques are used to analyse the effect of globtop design on the reliability of aluminium wirebonds under cyclic thermal-mechanical loading conditions. The results will show the sensitivity of the reliability of the wirebonds to the changes in the geometry and the material properties of the wirebond globtop.