Review on atomization and sprays of biofuels for IC engine applications

Ever increasing energy requirements, environmental concerns and energy security needs are strongly influencing engine researchers to consider renewable biofuels as alternatives to fossil fuels. Spray process being important in IC engine combustion, existing literature on various biofuel sprays is reviewed and summarized. Both experimental and computational research findings are reviewed in a detailed manner for compression ignition (CI) engine sprays and briefly for spark ignition (SI) engine sprays. The physics of basic atomization process of sprays from various injectors is included to highlight the most recent research findings followed by discussion highlighting the effect of physico-chemical properties on spray atomization for both biofuels and fossil fuels. Biodiesel sprays are found to penetrate faster and haw narrow spray plume angle and larger droplet sizes compared to diesel. Results of analytical and computational models are shown to be useful in shedding light on the actual process of atomization. However, further studies on understanding primary atomization and the effect of fuel properties on primary atomization are required. As far as secondary atomization is concerned, changes in regimes are observed to occur at higher air-jet velocities for biodiesel compared to those of diesel. Evaporating sprays revealed that the liquid length is longer for biodiesel. Pure plant oil sprays with potential use in CI engines may require alternative injector technology due to slower breakup as compared to diesel. Application of ethanol to gasoline engines may be feasible without any modifications to port fuel injection (PFI) engines. More studies are required on the application of alternative fuels to high pressure sprays used in Gasoline Direct Injection (GDI) engines.

Universal flame propagation behavior in packed bed of biomass

This article aims at seeking the universal behavior of propagation rate variation with air superficial velocity (V-s) in a packed bed of a range of biomass particles in reverse downdraft mode while also resolving the differing and conflicting explanations in the literature. Toward this, measurements are made of exit gas composition, gas phase and condensed phase surface temperature (T-g and T-s), and reaction zone thickness for a number of biomass with a range of properties. Based on these data, two regimes are identified: gasificationvolatile oxidation accompanied by char reduction reactions up to 16 +/- 1cm/s of V-s and above this, and char oxidationsimultaneous char oxidation and gas phase combustion. In the gasification regime, the measured T-s is less than T-g; a surface heat balance incorporating a diffusion controlled model for flaming combustion gives and matches with the experimental results to within 5%. In the char oxidation regime, T-g and T-s are nearly equal and match with the equilibrium temperature at that equivalence ratio. Drawing from a recent study of the authors, the ash layer over the oxidizing char particle is shown to play a critical role in regulating the radiation heat transfer to fresh biomass in this regime and is shown to be crucial in explaining the observed propagation behavior. A simple model based on radiation-convection balance that tracks the temperature-time evolution of a fresh biomass particle is shown to support the universal behavior of the experimental data on reaction front propagation rate from earlier literature and the present work for biomass with ash content up to 10% and moisture fraction up to 10%. Upstream radiant heat transfer from the ash-laden hot char modulated by the air flow is shown to be the dominant feature of this model.

Studies on microscopic structure of diesel sprays under atmospheric and high gas pressures

In the present work, the spray structure of diesel from a 200-mu m, single-hole solenoid injector is studied using microscopic imaging at injection pressures of 700, 1000 and 1400 bar for various gas pressures. A long-distance microscope with a high resolution camera is used for spray visualization with a direct imaging technique. This study shows that even at very high injection pressures, the spray structure in an ambient environment of atmospheric pressure reveals presence of entangled ligaments and non-spherical droplets during the injection period. With increase in the injection pressure, the ligaments tend to get smaller and spread radially. The spray structure studies are also conducted at high gas pressures in a specially designed high pressure chamber with optical access. The near nozzle spray structure at the end of the injection shows that the liquid jet breakup is improved with increase in gas density. The droplet size measurement is possible only late in the injection duration when the breakup appears to be complete and mostly spherical droplets are observed. Hence, droplet size measurements are performed after 1.3 ms from start of the injection pulse. Spatial and temporal variation in Sauter Mean `Diameter (SMD) is observed and reported for the case corresponding to an injection pressure of 700 bar. Overall, this study has highlighted the importance of verifying the extentof atomization and droplet shape even in dense sprays before using conventional dropsizing methods such as PDPA.

Surface Tension and Its Temperature Coefficient of Molten Tin Determined with the Sessile Drop Method at Different Oxygen Partial Pressures

The surface tension of molten tin has been determined by the sessile drop method at The surface tension of molten tin has been determined by the sessile drop method at temperatures ranging from 523 to 1033 K and in the oxygen partial pressure (P-O2) range from 2.85 x 10(-19) to 8.56 x 10(-6) MPa, and its dependence on temperature and oxygen partial pressure has been analyzed. At P-O2 = 2.85 x 10(-19) and 1.06 x 10(-15) MPa, the surface tension decreases linearly with the increase of temperature and its temperature coefficients are -0.151 and -0.094 mNm(-1) K-1, respectively. However, at high P-O2 (3.17 x 10(-10), 8.56 x 10(-6) MPa), the surface tension increases with the temperature near the melting point (505 K) and decreases above 723 K. The surface tension decrease with increasing P-O2 is much larger near the melting point than at temperatures above 823 K. The contact angle between the molten tin and the alumina substrate is 158-173degrees, and the wettability is poor.

Determinación del efecto de inclusión de canavalia (Canavalia ensiformis) sobre parámetros productivos de cerdos en crecimiento

Se realizó un experimento con 18 cerdos en la etapa de crecimiento, con una duración de 8 semanas (56 días) con el objetivo de determinar el efecto de inclusión de canavalia en la dieta base, sobre consumo, ganancia media diaria (GMD), conversión alimenticia y utilidad económica. Las dietas de los diferentes tratamientos consistieron en: T1: 0% de inclusión de canavalia o sea 100% dieta base; T2: 5% de inclusión de canavalia con 95% dieta base y T3: 10% de inclusión de canavalia y 90% dieta base. Se emplearon cerdos con 45 días de edad de pesos similares, cada tratamiento estuvo conformado por tres repeticiones de 2 cerdos cada una. Se utilizó un Diseño Completamente al Azar (D.C.A). Se obtuvieron ganancias medias diarias de TI: 21.30; T2: 40.30; T3:25.32 gr/día/cerdo no resultando significativo al P< 0.05. El análisis económico evidencia que las mejores utilidades se obtuvieron con el tratamiento T2. Se concluye que se puede suministrar raciones para la alimentación de cerdos incluyendo leguminosa (canavalia) con el fin de disminuir los costos de alimento.

Sapientia, 1997, Vol. LII, nº 201 (número completo)

Contenido: El aristotelismo y el tomismo frente al egoísmo psicológico / María L. Lukac de Stier – El deseo natural de ver a Dios en la Summa contra Gentiles / Guillermo Jorge Cambiasso – La creación como encuentro del ser y de la nada en la teología del maestro Eckhart de Hochheim O.P. (1260-1327) / Brian J. Farrelly – Malebranche y el libertinage érudit / Francisco Leocata – The problem of person and Jean Mouroux / John M. McDermott ; Glenn J. Comandini – Los fundamentos de la Bioética de H. Tristram Engelhardt / Jorge Martínez Barrera – Cuando las contradictorias son verdaderas / Marisa Villalba de Tablón – Examen del escepticismo moral y del relativismo moral / Camilo Tale – Saint Thomas et le mystère de la création : une réponse aux interrogations de l’homme d’aujourd’hui / Marie-Dominique Philippe – La finalidad de la naturaleza humana : alcance y actualidad de la cuestión / Beatriz Eugenia Reyes Oribe – La providencia y el gobierno del mundo / Alberto Caturelli – Saint Thomas et le problème de la possibilité d’un univers créé éternel / Alain-Marie de Lassus – La causalidad material de los elementos en la generación de los cuerpos mixtos / Mario Enrique Sacchi -- Bibliografía

Square wine glass mode resonator with quality factor of 4 million

We report on the experimental characterization of a single crystal silicon square-plate microresonator. The resonator is excited in the square wine glass (SWG) mode at a mechanical resonance frequency of 2.065 MHz. The resonator displays quality factor of 9660 in air and an ultra-high quality factor of Q = 4.05 × 106 in 12 mtorr vacuum. The SWG mode may be described as a square plate that contracts along one axis in the fabrication plane, while simultaneously extending along an orthogonal axis in the same plane. The resonant structure is addressed in a 2-terminal configuration by utilizing equal and opposite drive polarities on surrounding capacitor electrodes, thereby decreasing the motional resistance of the resonator. The resonant micromechanical device has been fabricated in a commercial silicon-on-insulator process through the MEMSCAP foundry utilising a minimum electrostatic gap of 2 μm. © 2008 IEEE.

Desborde y herida de amor en la poesía mística de Hadewijch de Amberes

La autora ofrece un estudio sobre la voz místico-poética de Hadewijch de Amberes, una de las representantes más destacadas del movimiento beguinense del siglo XIII. Su finalidad es la reconstrucción de la interioridad cristiana desde la estética medieval en proyección hacia nuestro presente a partir de las figuras del “desborde” y la “herida” de amor, por coincidir en ellas la mística medieval y la actual.

Tropical river fisheries valuation: background papers to a global synthesis

This report is a compilation of five regional reviews that document the global status of tropical rivers and inland fisheries in three continents: Latin America, Africa and Asia. It explores the role of ‘valuation’ methods and their contribution to policy-making and river fishery management. From the compilation, the best estimate of the global value of inland fisheries for those three continents is US$ 5.58 billion (gross market value), which is equivalent to 19 percent of the current value of annual fish exports from developing countries (US$ 29 billion) for 2004. The compilation shows that there is a general shortage of information on inland fisheries, especially derived from conventional economic valuation methods, though information from economic impact assessment methods and socio-economic and livelihood analysis methods is more widely available. The status of knowledge about the impact of changes in river management on the value of tropical river fisheries is weak and patchy. Although the impacts of large dams on the hydrology, ecology and livelihood support attributes of tropical rivers are well-recognized, there have been only few valuation studies of these issues. The document highlights the need for further valuation studies of tropical river and inland fisheries in developing countries. It underlines how vital it is for policy-makers and other stakeholders to understand the importance of these natural resources in order to make appropriate decisions concerning their role in development policy and illustrates why capacity building in valuation should become a major priority for agencies concerned with fisheries management and policy-making.

A radio frequency field guide using field induced adiabatic potential

We study the behaviour of atoms in a field with both static magnetic field and radio frequency (rf) magnetic field. We calculate the adiabatic potential of atoms numerically beyond the usually rotating wave approximation, and it is pointed that there is a great difference between using these two methods. We find the preconditions when RWA is valid. In the extreme of static field almost parallel to rf field, we reach an analytic formula. Finally, we apply this method to Rb-87 and propose a guide based on an rf field on atom chip.

Bismuth-activated luminescent materials for broadband optical amplifier in WDM system

New broadband near infrared luminescence covering the whole work windows (1260-1625 nm) of the current wavelength division multiplexing (WDM) system was found from bismuth-activated M2O-Al2O3-SiO2 (M = Li, Na) and Li2O-Ta2O5-SiO2 glasses at room temperature in the case of 808 nm-laser excitation. But the near infrared luminescence mechanism of the bismuth-activated glasses is not well understood up to now. The figure-of-merits of bandwidth and gain of the glasses are better than those of Er3+-doped silicate glasses and Ti3+ doped sapphire, implying they are the promising gain-medium candidates for the broadband amplifiers and the widely tunable laser sources. (c) 2007 Elsevier B.V. All rights reserved.

Broadband infrared luminescence from bismuth-doped GeS2-Ga2S3 chalcogenide glasses

Near-infrared luminescence is observed from bismuth-doped GeS2-Ga2S3 chalcogenide glasses excited by an 808 nm laser diode. The emission peak with a maximum at about 1260 nm is observed in 80GeS(2)-20Ga(2)S(3):0.5Bi glass and it shifts toward the long wavelength with the addition of Bi gradually. The full width of half maximum (FWHM) is about 200 nm. The broadband infrared luminescence of Bi-doped GeS2-Ga2S3 chalcogenide glasses may be predominantly originated from the low valence state of Bi, such as Bi+. Raman scattering is also conducted to clarify the structure of glasses. These Bi-doped GeS2-Ga2S3 chalcogenide glasses can be applied potentially in novel broadband optical fibre amplifiers and broadly tunable laser in optical communication system.

激光尘埃粒子计数器微型光学传感器的研究

研制成功便携式激光尘埃粒子计数器的核心部件——微型光学传感器。该传感器采用直角散射光收集形式。以高功率半导体激光器作为光源，同时采用高性能的PIN型光电二极管作为光电探测器。散射光收集系统为单一大数值孔径的球面反射镜，其对粒子散射光的收集角范围从20°到160°。粒子散射光信号是脉冲信号，其频谱成份主要在高频段，所以在PIN型光电二极管后用一个带通式前置放大器来消除外界的低频噪声．根据米氏散射理论计算了该光学传感器的光散射响应特性，并用聚苯乙烯标准粒子实测了该光学传感器的性能。结果表明，该系统具有高的信噪

Superbroadband 1310 nm emission from bismuth and tantalum codoped germanium oxide glasses

Near-infrared broadband emission from bismuth-tantalum-codoped germanium oxide glasses was observed at room temperature when the glasses were pumped by an 808 nm laser diode. The emission band covered the 0, E, S, C, and L bands (1260-1625 nm), with a maximum peak at similar to 1310 nm, a FWHM broader than 400 nm, and a lifetime longer than 200 lis. The observed broadband luminescence was attributed to bismuth clusters in the glasses. Bismuth-tantalum-codoped germanium oxide glass might be promising as amplification media for broadly tunable lasers and wideband amplifiers in optical communications. (c) 2005 Optical Society of America.

Planejamento ambiental da bacia hidrográfica do Rio Guapi-Macacu: estudo da paisagem e qualidade ecológica

Os estudos de relação entre a paisagem e a água doce vêm sendo aprofundados pela comunidade científica e pelos propositores de políticas públicas, principalmente, para atender às demandas sobre as maneiras que este sistema ambiental pode ser alterado e na identificação das implicações políticas e ecológicas destas mudanças. Quanto mais se torna intenso e diversificado o uso dos corpos hídricos e da paisagem em bacias hidrográficas maior é a necessidade de se definir formas de planejamento, gerenciamento e gestão ecológica desses ecossistemas. O completo entendimento do funcionamento e dos processos ecológicos que ocorrem em uma bacia hidrográfica exige conhecimento simultâneo de seus sistemas aquáticos e terrestres, da biodiversidade, da fisiografia, da geologia e de sua conservação, temporal e espacial. Este entendimento e conhecimento da área de interesse são vitais para proposições de instrumentos ambientais legais, como Unidades de Conservação (UCs). É muito importante que a fundamentação destas propostas tenha como eixo principal o funcionamento dos ecossistemas e das paisagens, de forma a garantir uma maior conectividade e integração entre água (doce, salobra e salgada) e terra, e seus múltiplos usos. A presente tese foi desenvolvida com base neste contexto, apresentando e aplicando metodologias integradoras, seja na ecologia de paisagem (EP), seja na relação entre os ambientes dulcícola e terrestre. O objetivo principal deste trabalho foi o desenvolvimento de processos para planejamento ambiental em BHs, através do diagnóstico, compreensão e análise do funcionamento e dinâmica da paisagem e de ecossistemas de rios e córregos, apoiados no uso de geotecnologias. De acordo com os resultados obtidos, a BHGM ocupa uma área de 1260,36 km e 204,69 km de perímetro. É uma bacia com forma mais alongada que circular (KC = 1,6144e IC =0,4747 km/km) que indica uma menor susceptibilidade a enchentes em condições normais de precipitação exceto em eventos de intensidades anômalas. O mapeamento base (2007) realizado indicou que a bacia possuía 34,86% de uso antrópico e 64,04 % de remanescente florestal. Os dados de fitofisionomia potencial indicaram predominância da classe Florestas Ombrófila Densa Submontana (40%) e de Terras Baixas (39%). Foram estabelecidas para bacia 269 unidades de paisagem (integração da geomorfologia, geologia, fitofisionomia e uso da terra e cobertura vegetal (2007)) que junto com os dados de métrica de paisagem constituíram a proposta integrativa da tese para ecologia de paisagem. Em relação à qualidade ambiental foram adotados o índice de avaliação visual (IAV), o índice multimétrico físico-químico bacteriológico e o índice biótico estendido (IBE). A comparação entre estes índices demonstrou a confirmação entre os seus resultados para a maioria dos pontos amostrados nas áreas de referência e de pelo menos dois índices para os pontos intermediários e impactados. Foram propostos também dois cenários para a bacia: um considerando as condicionantes e medidas compensatórias vinculadas à licença prévia do complexo petroquímico do Estado do Rio de Janeiro (COMPERJ); e outro, sem considerar estas condições. O primeiro indicou a realização da restauração ecológica, seguindo as diretrizes do mapa síntese, integrada para restauração da paisagem.