Fabrication of an organic field effect transistor using nano imprinting of Ag inks and semiconducting polymers

A simple and cheap procedure for flexible electronics fabrication was demonstrated by imprinting metallic nanoparticles (NPs) on flexible substrates. Silver NPs with an average diameter of 10 nm were prepared via an improved chemical approach and Ag Np ink was produced in α-terpineol with a concentration up to 15%. Silver micro/nanostructures with a dimension varying from nanometres to microns were produced on a flexible substrate (polyimide) by imprinting the as-prepared silver ink. The fine fluidic properties of an Ag NP/α-terpineol solution and low melting temperatures of silver nanoparticles render a low pressure and low temperature procedure, which is well suited for flexible electronics fabrication. The effects of sintering and mechanical bending on the conductivity of imprinted silver contacts were also investigated. Large area organic field effect transistors (OFET) on flexible substrates were fabricated using an imprinted silver electrode and semiconducting polymer. The OFET with silver electrodes imprinted from our prepared oleic acid stabilized Ag nanoparticle ink show an ideal ohmic contact; therefore, the OFET exhibit high performance (Ion/Ioff ratio: 1 × 103; mobility: 0.071 cm2 V-1 s-1). © 2010 IOP Publishing Ltd.

Water quality of two semi-closed areas in the United Arab Emirates Coast along the Arabian Gulf:a comparative study

A comparative study was carried out between the two biggest creeks along the Arabian Gulf coast of the United Arab Emirates to evaluate impacts of sewage and industrial effluents on their hydrochemical characteristics. Surface and bottom water samples were collected from Abu Dhabi and Dubai creeks during the period from October 1994 to September 1995. The hydrochemical parameters studied were: temperature (21.10-34.00°C), salinity (37.37-47.09%), transparency (0.50-10.0 m), pH (7.97-8.83), dissolved oxygen (1.78-13.93 mg/l) and nutrients ammonia (ND- 13.12,ug-at N/1), nitrite (ND-6.66 ,ug-at N/1), nitrate (ND- 41.18 ,ug-at N/1), phosphate (ND- 13.06 ,ug-at P/1), silicate (0.68-32.50 ,ug-at Si/1), total phosphorus (0.26- 21.48 ,ug-at P/1), and total silicon (0.95- 40.32 ,ug-at Si/1). The present study indicates clearly that seawater of Abu-Dhabi Creek was warmer (28.l2°C) than Dubai (27.56°C) resulting in a higher rate of evaporation. Owing to more evaporation, salinity levels showed higher levels at Abu Dhabi (43.33%) compared to Dubai (39.03%) seawater. The study also revealed higher secchi disc readings at Abu Dhabi Creek (4.68 m) as compared to Dubai Creek (2.60 m) suggesting more transparency at Abu Dhabi Creek. Whereas, seawater of Dubai exhibited higher levels of pH (1.03 times), and dissolved oxygen (1.05 times) than Abu Dhabi seawater due to an increase in productivity. Meantime, seawater of Dubai showed higher tendency to accumulate ammonia (8.22 times), nitrite (10.93 times), nitrate (5.85 times), phosphate (10.64 times), silicate (1.60 times), total phosphorus (3.19 times), and total silicon (1.54 times) compared to Abu Dhabi seawater due to the enrichment of seawater at Dubai with domestic sewage waters which has distinctly elevated the levels of the nutrient salts particularly in inner-most parts of the creek leading to eutrophication signs. The changes occurred in the receiving creek water of Dubai as a result of waste-water disposal that have also reflected on the atomic ratios of nit: Effect of pollution rogen: phosphorus: silicon.

Larval development of a semi terrestrial mangrove sesarmine crab Chasmagnathus convexus (Crustacea: Decapoda: Brachyura: Grapsidae) reared in laboratory

Four zoeal stages and one megalopal stage were identified in laboratory reared semiterrestrial mangrove sesarmine crab Chasmagnathus convexus. At an average salinity and temperature of 20±1% and 19.2±0.2°C, the megalopa was attained 24 days after hatching. Morphologically, the first zoae of C. convexz1s is very similar to those of other species of the genus Chasmagnathus as well as species of the genus Helice, in that view all share the following characteristics: lateral spine on the carapace, three pairs of setae on the posterior margin of the telson furca, one plus five setae on the endopod of the maxillule, and two plus two setae on the endopod of the maxilla. The differences between the first zoea and megalopa of and those of its congeners are discussed.

Culture potentials of bata, Labeo bata under semi-intensive management system

Small indigenous fish species (SIS) provide food, nutrition, subsistence and supplemental income to a great majority of the people particularly the poor and disadvantaged people of Bangladesh. To date nobody explored the possibilities of culturing these species in combination with the indigenous major carps viz. catla, Catla catla; rohu, Labeo rohita, and mrigal Cirrhinus cirrhosus and grass carp, Ctenopharyngodon idellus. An experiment on the polyculture of carps with a popular SIS, bata (Labeo bata) was carried out to evaluate the production performance of carp-SIS culture in on-farm condition during 15 March to 15 September 2003. Three treatments each having three replications with different stocking densities of bata were tested keeping the carp species combination and stocking density similar in all the treatments viz. treatment 1 (T1), bata (5,000/ha) + catla, rohu and mrigal (5,000/ha at the ratio of 1:1:1) + grass carp (250/ha); treatment 2 (T2), bata (7,500/ha) + catla, rohu and mrigal (5,000/ha at the ratio of 1:1:1) + grass carp (250/ha); and treatment 3 (T3), bata (1 0,000/ha) + catla, rohu and mrigal (5,000/ha at the ratio of 1:1:1) + grass carp (250/ha). After six months rearing, the production obtained were 2,466±77, 2,395±85 and 2,074±72 kg/ha from T1, T2 and T3, respectively. The highest production was obtained from T1, where the stocking density of bata was the minimum (5,000/ha) while the lowest production was obtained from T1 [sic], where the stocking density of bata was maximum (10,000/ha). Significant difference (P<0.05) exists in the production levels as obtained from different treatments. The contribution of bata to total production was 10.31%, 13.96% and 14.38% in case of T1, T2 and T3, respectively.