Novel B-site ordered double perovskite Ba2Bi0.1Sc0.2Co1.7O6-x for highly efficient oxygen reduction reaction

Double perovskite Ba₂Bi_0.1Sc_0.2Co_1.7O_6-x (BBSC) demonstrates low polarization resistance between 600 and 750 °C due to the high oxygen reduction rate of BBSC as reflected by its large D_V and k values, which are derived from the face centered cubic structure and high cobalt content.

High performance cobalt-free perovskite cathode for intermediate temperature solid oxide fuel cells

Bi doping of SrFeO3d results in the formation of a structure with high symmetry and extraordinary electrochemical performance for Bi0.5Sr0.5FeO3-d, which is capable of competing effectively with the current Co-based cathode benchmark with additional advantages of lower thermal expansion and cost.

Physical, chemical and biological characterization of membrane fouling

In this chapter, advanced characterization of membrane fouling as a diagnostic tool has been summarized to prevent membrane fouling. Physical, chemical and biological analyses as membrane autopsies are mainly utilized to better understand membrane foulant. The physical characterization gives structure, roughness, charge effect, strength and hydrophobicity of membrane fouling. The chemical methods provide qualitative and quantitative measurements of different inorganic and organic matter. The biological properties present the spatial biofilm distribution, structure of dominant microorganisms and isolation and identification of microorganisms. In addition, detailed membrane foulant types are reviewed in terms of structure, roughness, hydrophobicity, charge effect, strength, calcium, magnesium, aluminum, iron, silicate, particle, functional group, biopolymer, humic acid, polysaccharide, structural composition, biofilm structure, microorganism and foulant interaction.

Modelling based design of a pilot-scale membrane bioreactor for combined nutrient removal from domestic wastewater

A three stage-treatment of domestic wastewater including anaerobic, anoxic and aerobic phases is employed in this study while a clarifier unit is replaced with a submerged membrane in the aerobic unit. The effects of operational parameters on the performance of a pilot scale submerged membrane bioreactor (SMBR) namely hydraulic retention time (HRT), ratio of return activated sludge (QRS), ratio of internal recycle (QIR), solid retention time (SRT) and dissolved oxygen (DO) are evaluated by simulations, using a hybrid model composed of TUDP model, oxygen transfer model, biofouling model due to extra-cellular polymeric substances (EPS) and turbulent shear model. The results showed that anaerobic HRT of 3 hours, anoxic HRT of 6 hours, QRS of 20% and QIR of 300 % are satisfactory in obtaining a high removal efficiency (>90%) of COD, NH4-N, P04-P as well as a less sludge production. An increase of sludge production causes an increase in EPS, which fouls the membrane surface and increase the cleaning cycle of membrane. Operation of 5MBR system at 2 mg/I of DO and 30 days of SRT can extend the membrane cleaning cycle dramatically. The membrane cleaning cycle however is strongly dependent on the initial and terminal specific fluxes and displays inverse power relationships to those fluxes.

Reclaiming spent liquor from cotton reactive dyebaths using nanofiltration membrane for possible reuse of water and salt

During dyeing, salts are placed in a dyebath to aid the fixation of various dyes on to the fabric while bases are added to raise the pH from around neutral to pH 11. Afterwards, the used dyebath solution, called dyebath spent liquor, is discharged with almost all the salts and bases added as well as unfixed dyes. Consequently, a lot of raw materials are lost in the waste stream ending up in the environment as pollutants. In this study, possibilities of reusing water and salts of dyebathes were investigated, using a nanofiltration membrane. When the salt concentration in the spent liquor was increased from 10 to 80 g/L, the salt rejection by membrane was found to decrease initially; however, the salt rejection increased over the time, which was not expected. The aggregation of dye was also studied and found to decrease in the concentrate when the salt concentration was increased. This may be due to the aggregation of salt in the concentrate, which explains the increase in salt rejection. This information is useful for the textile industry in evaluating the treated water quality for the purpose of reuse.