辽宁植烟土壤pH值状况及其与烟叶主要品质指标的相关分析

以辽宁省7个植烟县为对象,采集了154个土壤和中部烟叶样品,在测定土壤pH值的基础上,测定烟叶中的烟碱含量、还原糖含量、总糖含量以及氮钾含量。通过数理统计的方法分析了土壤pH值与烟叶内在质量指标之间的关系,结果表明:辽宁烟区植烟土壤的pH值大多比较适合烟叶生长,但是仍有12%的植烟土壤pH值过高或过低,需要进行改良。土壤pH值与烟叶总氮含量、烟碱含量、钾含量两两之间均呈显著或极显著的曲线相关关系,即当土壤pH值从4.0变化到6.5时土壤pH值与烟碱含量之间为负效应关系,当土壤pH值从6.5变化到9.0时土壤pH值与烟碱含量之间为正效应关系,土壤pH值与总氮含量、钾含量、总糖含量之间为负效应关系。

融合株SPSC发酵生产酒精的工艺研究Ⅰ.絮凝速率、发酵过程的最适温度和pH值

酿酒酵母属(S. cereviae)变异株和粟酒裂殖酵母属(S. pombe)变异株进行属间原生质体融合得到融合株SPSC,该融合株比S. cereviae具有强的自身絮凝能力。以葡萄糖浓度150g/L的底物在30～44℃的温度范围内进行摇瓶厌氧发酵,获得最佳温度范围为34～38℃,最高发酵温度为40℃。在有效容积2.35L悬浮床反应器中,在pH值3.0～5.0范围内进行连续发酵,获得最适发酵pH为3.5～4.5。

树木根际pH环境与氧化还原状况

以3年生红松、核桃楸、水曲柳、椴树苗木为试材，运用琼脂─指示剂法对长白山地区有代表性的4种苗木的根际pH环境与氧化还原状况进行了研究，试验结果表明：红松和核桃楸根际的pH值在5.2和6.0之间，呈酸性；水曲柳和椴树根际呈碱性（pH值大于7.5）。红松根系分泌质子的部位，主要表现在根尖以上4.5～8.0cm的范围内，这是反映根系吸收养分的部位，也是根系生命活动最旺盛的区域，4种苗木根际均为氧化型（态）。

温度、pH及干旱胁迫对沙地樟子松外生菌根菌生长影响

通过对采集于沙地樟子松人工林内的3种外生菌根真菌(牛肝菌Boletussp.、乳菇Lactariussp.、高环柄菇Macrolepiota procera)进行纯培养,在不同温度、pH值和PEG模拟干旱胁迫条件下,观测了外生菌根菌的生长发育状况。结果表明,3种外生菌根菌生物量在不同pH范围(3~7)内存在着显著差异(P<0.05);在低于5℃和高于37℃时,3种外生菌根菌均不能生长,其最适生长温度分别为:牛肝菌,25℃高环柄菇,25~28℃,乳菇,25~30℃;在低浓度PEG胁迫处理条件下(10%,-0.20MPa),3种外生菌根菌的生长均有所增加,当PEG胁迫达到30%(-1.53 MPa)时,3种外生菌根菌的生长均受到抑制。与上述结果比较,沙地樟子松人工林地土壤的实际pH值在外生菌根菌的最适生长范围内;林地最高气温值远远超过3种外生菌根菌的最适生长值的时间在每年的生长季都会出现;在极端干旱年份(如1996年),林地土壤的实际含水量在生长季节(5~9月)远远低于抑制外生菌根菌生长的土壤含水量,可能影响到外生菌根菌的生存。因此,可以推断,沙地樟子松人工林地的外生菌根菌的生长与发育,在干旱胁迫及高温作用下受到很大程度的影响,如果仅从微生物角度分析,外生菌根菌在干旱和高温条件下不能生长或已经死亡是导致沙地樟子松人工林衰退的一个原因。

Surface modelling of soil pH

In addition to classical methods, namely kriging, Inverse Distance Weighting (IDW) and splines, which have been frequently used for interpolating the spatial patterns of soil properties, a relatively more accurate surface modelling technique is being developed in recent years, namely high accuracy surface modelling (HASM). It has been used in the numerical tests, DEM construction and the interpolation of climate and ecosystem changes. In this paper, HASM was applied to interpolate soil pH for assessing its feasibility of soil property interpolation in a red soil region of Jiangxi Province, China. Soil pH was measured on 150 samples of topsoil (0-20 cm) for the interpolation and comparing the performance of HASM, kriging. IDW and splines. The mean errors (MEs) of interpolations indicate little bias of interpolation for soil pH by the four techniques. HASM has less mean absolute error (MAE) and root mean square error (RMSE) than kriging, IDW and splines. HASM is still the most accurate one when we use the mean rank and the standard deviation of the ranks to avoid the outlier effects in assessing the prediction performance of the four methods. Therefore, HASM can be considered as an alternative and accurate method for interpolating soil properties. Further researches of HASM are needed to combine HASM with ancillary variables to improve the interpolation performance and develop a user-friendly algorithm that can be implemented in a GIS package. (C) 2009 Elsevier B.V. All rights reserved.

VGIS-COLLIDE: an effective collision detection algorithm for

Collision detection is an important component in simulation applications which are based on virtual geographic information system (VGIS). In this paper, an effective collision detection algorithm for multiple objects in VGIS, VGIS-COLLIDE, is presented. The algorithm firstly integrates existing quadtree, which is the global hierarchical structure of VGIS, with axis-aligned bounding box of object to perform the broad-phase of collision detection. After that, exact collision detection between two objects which have passed the broad-phase of collision detection is performed. The algorithm makes no assumption about input primitives or object's motion and is directly applicable to all triangulated models. It can be applicable to both rigid and deformable objects without preprocessing. The performance of the algorithm has been demonstrated in several environments consisting of a high number of objects with hundreds of thousands of triangles.