Electrical conduction and rheological behaviour of composites of poly(epsilon-caprolactone) and MWCNTs

Two mechanisms of conduction were identified from temperature dependent (120 K-340 K) DC electrical resistivity measurements of composites of poly(c-caprolactone) (PCL) and multi-walled carbon nanotubes (MWCNTs). Activation of variable range hopping (VRH) occurred at lower temperatures than that for temperature fluctuation induced tunneling (TFIT). Experimental data was in good agreement with the VRH model in contrast to the TFIT model, where broadening of tunnel junctions and increasing electrical resistivity at T > T-g is a consequence of a large difference in the coefficients of thermal expansion of PCL and MWCNTs. A numerical model was developed to explain this behavior accounting for a thermal expansion effect by supposing the large increase in electrical resistivity corresponds to the larger relative deformation due to thermal expansion associated with disintegration of the conductive MWCNT network. MWCNTs had a significant nucleating effect on PCL resulting in increased PCL crystallinity and an electrically insulating layer between MWCNTs. The onset of rheological percolation at similar to 0.18 vol% MWCNTs was clearly evident as storage modulus, G' and complex viscosity, vertical bar eta*vertical bar increased by several orders of magnitude. From Cole-Cole and Van Gurp-Palmen plots, and extraction of crossover points (G(c)) from overlaying plots of G' and G '' as a function of frequency, the onset of rheological percolation at 0.18 vol% MWCNTs was confirmed, a similar MWCNT loading to that determined for electrical percolation. 

Relationship between Laves phase and the impact brittleness of P92 steel reevaluated

Laves phase has been widely accepted to cause the impact brittleness of 9–12Cr martensitic heat-resistant steels after long time aging at elevated temperatures. However, in the present research, the impact toughness of the already brittle P92 steel aged at 600 °C for 2035 h could be restored to the original level by reheating at 700 °C for 1 h, with Laves phase barely changed. This interesting result strongly indicated that the presence of Laves phase might not be the real reason for the impact brittleness.

Self-referencing thermometry in the nanoscale

Na ´ultima d´ecada emergiu uma linha de investiga¸c˜ao muito activa em term´ometros n˜ao invasivos e precisos que possam determinar temperatura `a escala nanom´etrica. Esta investiga¸c˜ao foi fortemente estimulada pelas numerosas solicita¸c˜oes da nanotecnologia e da biomedicina, por exemplo. Uma das abordagens mais promissoras prop˜oe o uso de i˜oes trivalentes de lantan´ıdeos que apresenta propriedades fotoluminescentes que dependem da temperatura. Neste trabalho demonstra-se que esta t´ecnica combina as vantagens de te um limite de detec¸c˜ao de 0.5 graus com sensibilidade at´e 4.5 % · K−1. Este term´ometro molecular pode ser processado em filmes finos ou nanopart´ıculas, abrindo os campos de aplica¸c˜ao a diferentes utiliza¸c˜oes. As nanopart´ıculas de s´ılica produzidas s˜ao caracterizadas na presen¸ca e na ausˆencia de i˜oes lantan´ıdeos. Sem o metal, as nanopart´ıculas de APTES/TEOS demonstram ser luminescentes sob excita¸c˜ao UV sem necessidade de utilizar qualquer tratamento t´ermico. O rendimento quˆantico de emiss˜ao depende apenas da propor¸c˜ao dos silanos e pode atingir o valor de 0.15 ± 0.02. A co-dopagem destas nanopart´ıculas com Eu3+ e Tb3+ permite obter sondas com resposta raciom´etrica, com a possibilidade de ajustar a gama de temperaturas de opera¸c˜ao e a sensibilidade, via desenho inteligente da matriz de suporte e dos ligandos de β-dicetona que est˜ao coordenados ao i˜ao met´alico. Quando processados como filmes, este term´ometro permite o mapeamento de temperaturas com resolu¸c˜ao espacial 1.8 μm. A racionaliza¸c˜ao da dependˆencia de temperatura ´e uma ferramenta ´util para desenvolver term´ometros que operam em gamas de temperatura espec´ıficos (e.g. gama de temperatura fisiol´ogica, 290-340 K) com sensibilidade acima de 0.5 % · K−1. A combina¸c˜ao de esfor¸cos de um grande n´umero de diversas disciplinas ir´a previsivelmente permitir o surgimento de term´ometros moleculares novos e sofisticados, preenchendo os principais requisitos das nanociencias.

Robotics and Development of Intellectual Abilities in Children

It is necessary to transform the educative experiences into the classrooms so that they favor the development of intellectual abilities of children and teenagers. We must take advantage of the new opportunities that offer information technologies to organize learning environments which they favor those experiences. We considered that to arm and to program robots, of the type of LEGO Mind Storms or the so called “crickets”, developed by M. Resnik from MIT, like means so that they children them and young people live experiences that favor the development of their intellectual abilities, is a powerful alternative to the traditional educative systems. They are these three tasks those that require a reflective work from pedagogy and epistemology urgently. Robotics could become in the proper instrument for the development of intelligence because it works like a mirror for the intellectual processes of each individual, its abilities like epistemologist and, therefore, is useful to favor those processes in the classroom.

Face recognition by cortical multi-scale line and edge representations

Empirical studies concerning face recognition suggest that faces may be stored in memory by a few canonical representations. Models of visual perception are based on image representations in cortical area V1 and beyond, which contain many cell layers for feature extraction. Simple, complex and end-stopped cells provide input for line, edge and keypoint detection. Detected events provide a rich, multi-scale object representation, and this representation can be stored in memory in order to identify objects. In this paper, the above context is applied to face recognition. The multi-scale line/edge representation is explored in conjunction with keypoint-based saliency maps for Focus-of-Attention. Recognition rates of up to 96% were achieved by combining frontal and 3/4 views, and recognition was quite robust against partial occlusions.