Elucidating the Regulon of the Multidrug Resistance Regulator RarA in Klebsiella pneumoniae

RarA is an AraC-type regulator in Klebsiella pneumoniae, which, when overexpressed, confers a low-level multidrug-resistant (MDR) phenotype linked to the upregulation of both the acrAB and oqxAB efflux genes. Increased rarA expression has also been shown to be integral in the development of tigecycline resistance in the absence of ramA in K. pneumoniae. Given its phenotypic role in MDR, microarray analyses were performed to determine the RarA regulon. Transcriptome analysis was undertaken using strains Ecl8?rarA/pACrarA-2 (rarA-expressing construct) and Ecl8?rarA/pACYC184 (vector-only control) using bespoke microarray slides consisting of probes derived from the genomic sequences of K. pneumoniae MGH 78578 (NC_009648.1) and Kp342 (NC_011283.1). Our results show that rarA overexpression resulted in the differential expression of 66 genes (42 upregulated and 24 downregulated). Under the COG (clusters of orthologous groups) functional classification, the majority of affected genes belonged to the category of cell envelope biogenesis and posttranslational modification, along with genes encoding the previously uncharacterized transport proteins (e.g., KPN_03141, sdaCB, and leuE) and the porin OmpF. However, genes associated with energy production and conversion and amino acid transport/metabolism (e.g., nuoA, narJ, and proWX) were found to be downregulated. Biolog phenotype analyses demonstrated that rarA overexpression confers enhanced growth of the overexpresser in the presence of several antibiotic classes (i.e., beta-lactams and fluoroquinolones), the antifungal/antiprotozoal compound clioquinol, disinfectants (8-hydroxyquinoline), protein synthesis inhibitors (i.e., minocycline and puromycin), membrane biogenesis agents (polymyxin B and amitriptyline), DNA synthesis (furaltadone), and the cytokinesis inhibitor (sanguinarine). Both our transcriptome and phenotypic microarray data support and extend the role of RarA in the MDR phenotype of K. pneumoniae.

Identifying Economically Vulnerable Groups as the Economic Crisis Emerged

A frequent refrain during recent debates on welfare cuts and tax increases has related to the need to "protect the vulnerable". However, it is far from clear that a consensus exists on which individuals or groups are to be included under this heading with a consequent lack of clarity for the policy implications of pursuing this goal. In this paper, operating with a conception of social exclusion that incorporates notions of dynamics and multidimensionality, we make use of EU-SILC 2008 data for Ireland to clarify the distinction between income poverty and economic vulnerability. We then proceed to consider the relationship between these outcomes and multiple deprivation, financial pressures and perceptions of recent and future economic prospects. Our analysis is then extended to compare patterns of risk for poverty and vulnerability in relation to key socio-economic groups. Finally, we will consider the relationship between poverty and vulnerability and the distribution of welfare dependence. Our analysis suggests that the vulnerable but non-poor group may need to be a key focus of policy attention in the future.

The 'Europeanization' of Reference Groups

In this paper we address the question of the relative importance of within and between country differences in income and material deprivation in the European Union in the context of recent suggestions that insufficient attention has been paid to the latter. In particular, we respond to the argument that the 'state bounded' relative income approach obscures the significance of EU-wide reference groups. Making use of EU-SILC 2004, we have sought to quantify the magnitude of relevant within and between country differences and their relative impact. Overall, our analysis supports the view that the predominant frame of reference is a national one. The limited impact of European reference groups observed in our analysis does not require explanation in terms of the emergence of a European social stratification system. Furthermore, the significance of such comparisons depends not only on the expectations of those affected by European inequalities but on the degree of legitimacy afforded to ensuing demands. While an EU-wide income-threshold can provide information regarding progress of the Union towards greater social cohesion, its usage for this purpose does not require a strong sense of European identity. Given the current status of the European Social Model, it would seem unwise to attribute an undue degree of policy relevance to the relatively modest impact of EU-wide reference groups revealed in our analysis.

Assessing synchrony in groups:Are you measuring what you think you are measuring?

Behavioural synchrony has been a popular topic of research in group living animals, but has so far lacked a standard approach. Previous studies have varied greatly in the number of behavioural states they have considered and the size of groups investigated. Here, a model of behavioural synchrony was used to test four measures of synchrony commonly used (proportion observations 100% conforming, mean proportion of conforming individuals, Ruckstuhl's group mean and the kappa coefficient). The model used scan samples of the behaviour of laying hens, originally categorised in 10 different behavioural states, as a basis for determining the agents' probability of performing behaviour states. We systematically varied the group size and the number of behavioural states in the model. The measures calculated from the behaviour of the model agents were compared against a synchrony factor that determined the 'motivation' of agents in the model to conform to the behaviour of other agents, for model runs with different group sizes and behavioural categories. The results of the model suggest that, of the measures considered, the kappa coefficient is the most suitable measure of synchrony. The kappa coefficient was the only measure of the four tested to control for expected levels of synchrony. Expected levels of synchrony are sensitive to both the number of behaviour states being examined and the size of the group, therefore observed levels of synchrony should be compared against expected levels to provide meaningful standardised measures. © 2012 Elsevier B.V.

Cycloidal magnetic order in the compound IrMnSi

A new compound, IrMnSi, has been synthesized, and its crystal structure and magnetic properties have been investigated by means of neutron powder diffraction, magnetization measurements, and first-principles theory. The crystal structure is found to be of the TiNiSi type (ordered Co2P, space group Pnma). The Mn-projected electronic states are situated at the Fermi level, giving rise to metallic binding, whereas a certain degree of covalent character is observed for the chemical bond between the It and Si atoms. A cycloidal, i.e., noncollinear, magnetic structure was observed below 460 K, with the propagation vector q=[0,0,0.4530(5)] at 10 K. The magnetism is dominated by large moments on the Mn sites, 3.8 mu(B)/atom from neutron diffraction. First-principles theory reproduces the propagation vector of the experimental magnetic structure as well as the angles between the Mn moments. The calculations further result in a magnetic moment of 3.21 mu(B) for the Mn atoms, whereas the Ir and Si moments are negligible, in agreement with observations. A calculation that more directly incorporates electron-electron interactions improves the agreement between the theoretical and experimental magnetic moments. A band mechanism is suggested to explain the observed magnetic order.

Reactions of nitrogen and oxygen surface groups in nanoporous carbons under inert and reducing atmospheres

The reactions of surface functional groups have an important role in controlling conversion of char nitrogen to NOx during coal combustion. This study involved an investigation of the thermal stability and reactions of nitrogen surface functional groups in nanoporous carbons. Four suites of carbons, which were used as models for coal chars, were prepared with a wide range of nitrogen and oxygen contents and types of functional groups. The porous structures of the carbons were characterized by gas adsorption methods while chemical analysis, X-ray photoelectron spectroscopy, and X-ray near edge structure spectroscopy were used to characterize the surface functional groups. Temperature programmed desorption and temperature programmed reduction methods were used to study the reactivity of the surface functional groups during heat treatment under inert and reducing conditions. Heat treatment studies show that the order of stability of the functional groups is quaternary nitrogen > pyridinic > pyrrolic > pyridine N-oxide. Pyridine N-oxide surface groups desorb NO and form N-2 via surface reactions at low temperature. Pyrrolic and pyridinic functional groups decompose and react with surface species to give NH3, HCN, and N-2 as desorption products, but most pyrrolic groups are preferentially converted to pyridinic and quaternary nitrogen. The main desorption product is N-2. Approximately 15-40 wt % of the original nitrogen was retained in the carbons mainly as quaternary nitrogen after heat treatment to 1673 K. The results are discussed in terms of decomposition ranges for surface functional groups and reaction mechanisms of surface species.

Adsorption of metal ions on nitrogen surface functional groups in activated carbons

A commercially available coconut-shell-derived active carbon was oxidized with nitric acid, and both the original and oxidized active carbons were treated with ammonia at 1073 K to incorporate nitrogen functional groups into the carbon. An active carbon with very high nitrogen content (similar to9.4 wt % daf) was also prepared from a nitrogen-rich precursor, polyacrylonitrile (PAN). These nitrogen-rich carbons had points of zero charge (pH(pzc)) similar to H-type active carbons. X-ray absorption near-edge structure (XANES) spectroscopy, Fourier transform infrared (FTIR) spectroscopy, and temperature-programmed desorption (TPD) were used to characterize the nitrogen functional groups in the carbons. The nitrogen functional groups present on the carbon surface were pyridinic, pyrrolic (or indolic), and pyridonic structures. The adsorption of transition metal cations Cd2+, Ni2+, and Cu2+ from aqueous solution on the suite of active carbons showed that adsorption was markedly higher for carbons with nitrogen functional groups present on the surface than for carbons with similar pH(pzc) values. In contrast, the adsorption characteristics of Ca2+ from aqueous solution were similar for all the carbons studied. Flow microcalorimetry (FMC) studies showed that the enthalpies of adsorption of Cd2+(aq) on the active carbons with high nitrogen contents were much higher than for nitric acid oxidized carbons studied previously, which also had enhanced adsorption characteristics for metal ion species. The enthalpies of adsorption of Cu2+ were similar to those obtained for Cd2+ for specific active carbons. The nitrogen functional groups in the carbons act as surface coordination sites for the adsorption of transition metal ions from aqueous solution. The adsorption characteristics of these carbons are compared with those of oxidized carbons.