Effect of different proportions of brea gum in the functional characteristics of wheat flour starch: impact on the physical quality of bread

The aim of this work was to study the changes induced by BG in the behaviour of wheat starch, and observe the influence of these variations on the quality of a basic white bread. The effect of four BG addition levels in the wheat flour functional characteristics (WAI, WSI, and pasting properties) and bread quality (physical parameters, crumb grain structure, moisture and hardness) was investigated. The highest levels of BG (1% and 2%) decreased the peak viscosity, and increased the stability and setback of the flour. This was due to a lower gelatinization of the starch granules, caused by a competition for water between the hydrocolloid and starch. These changes influenced the bread quality. The loaves added with 1% and 2% of BG presented smaller alveoli: this resulted in more compact, hard and less airy crumbs. Nevertheless, the moisture of the samples at 1% and 2% of added gum was higher than the control bread. However, the incorporation of BG at 0.5% did not affect the pasting parameters and bread quality, but increased moisture of crumb, so this concentration would be most recommended for baking, since higher humidity could favour the shelf- life of the product.

Heating effects on physicochemical characteristics and antioxidant activity of flaxseed hull oil (Linum usitatissimum L)

The aim of this study was to analyze the effects of heating on some quality characteristics and antioxidant activity of flaxseed hull oil. Polyunsaturated fatty acids (PUFA) and Cox value decreased during heating. Heating process led to considerable increase in saponification value (SV), peroxide value (PV), p-anisidine value (p-AnV), oxidative value (OV) and specific extinction at 232 and 270 nm. There was a significant decrease in oil stability during heating process (1.4-1.0 h). Fuel properties of flaxseed hull oil were also changed after heating treatment. Heating process caused loss of total phenolic acids, total flavanoids, carotenoids and chlorophyll pigments. Phospholipids (PL) content were less changed compared to other bioactive compounds. Antioxidant activity of flaxseed hull oil decreased during heating process.

Effect of adding flours from marolo fruit (Annona crassiflora Mart) and jerivá fruit (Syagrus romanzoffiana Cham Glassm) on the physicals and sensory characteristics of food bars

Abstract The marolo (Annona crassiflora Mart.) and jerivá (Syagrus romanzoffiana Cham Glassm) fruits grow in the Cerrado biome, and have important sensory and nutritional characteristics. These fruits are eaten fresh or processed and embedded in ice cream, candy, juices, and liquors. However, their use is very limited and is localized exclusively to their native region. The aim of this study was to evaluate the use of these fruits in food consumer products to improve the nutritional patterns of consumers and extend knowledge thereof. To do this, different levels (0%, 5%, 10%, 15%, and 20%) of flour derived from the marolo and jerivá fruits were incorporated into food bars, which were then characterized in terms of their physical of the texture (TPA), porosity, color and sensorial properties. The food bars enriched with marolo and jerivá flours had an intense yellow color and increased hardness relative to the control bars; the porosity of the bars progressively decreased as the amount of flour added increased. The sensorial analysis in the snack bars developed added with the fruits flour no was influence by incorporation this component, showed good averages for the scores evaluated.

Effects of oil-water mixed frying and pure-oil frying on the quality characteristics of soybean oil and chicken chop

Abstract The effects of oil-water mixed frying (OWF) and pure-oil frying (POF) on changes in quality characteristics of soybean oil and chicken chop during six days of frying were comparatively investigated. The results showed that the changes in specific extinction coefficients, p-anisidine value, carbonyl value, viscosity and color of soybean oil were more pronounced in the case of POF, indicating that oil oxidative and polymeric degradation was retarded by OWF. Concerning fat content of chicken chop, lower (p<0.05) values were observed in the last three days in the case of OWF than POF. Meanwhile, OWF led to lower acrylamide formation in chops during the six days. Sensory evaluation showed that OWF provided chops with five attributes similar to those of chops fried by POF on the first day. As frying days increased, the decreases in scores for color, odor, flavor and overall acceptability were less in the case of OWF. In conclusion, OWF could be a worthwhile alternative for retarding oil deterioration and producing healthier and higher quality fried meat products.

Sensory response and physical characteristics of gluten-free and gum-free bread with chia flour

Abstract The aim of this study was to evaluate the physical quality and sensory acceptance of gluten-free breads with different percentages of chia flour (Salvia Hispanica L .). The chia flour was used to substitute rice flour and soy flour in order to replace the gum required in this type of bread. Four formulations were developed; a standard made with gum, and three formulations with 2.5%, 5.0% and 7.5% of chia flour. Analyses of specific volume, cooking losses and the rise in dough of the breads were performed. Sensory analysis included tests for affective acceptability and purchase intent. The results showed that the bread with 2.5% chia flour had specific volume and cooking losses similar to the standard. In terms of the rise in dough, the standard showed the highest values, followed by the bread made with 5.0% chia flour. The substitution of soy and rice flour with 2.5% of chia flour produced bread with sensory characteristics similar to the standard in all of the analyzed attributes; it also received higher purchase intent. Using chia flour at a concentration of 2.5%, compared to rice flour and soy flour, proved that it was possible to replace gum in the bread formulation.

Effect of incorporation of nutraceutical capsule waste of safflower oil in the mechanical characteristics of corn starch films

Abstract Biodegradable films blends made of safflower oil nutraceutical capsules waste corn starch (20:4, 30:4, 40:4 and 50:4) were prepared. The objective of this study was to evaluate the influence of addition of different concentrations of safflower oil nutraceutical capsule waste in the mechanical properties (tensile strength, elongation at break, Young’s modulus) and thickness of corn starch films. A decrease in tensile strength and Young’s modulus and an increase in elongation at break were observed with the increase in the content of the nutraceutical capsule waste. The results showed that the blends of safflower oil capsules waste-corn starch films demonstrated promising characteristics to form biodegradable films with different mechanical characteristics.

Physicochemical characteristics and sensory acceptability of ready-to-eat sliced frozen roast beef with partial reduction of sodium chloride

Abstract Sodium chloride in meat products provides microbiological stability and desirable technological and sensory effects. Therefore, the reduction of this ingredient is a challenge for the meat industry. The objective of this study was to evaluate the physicochemical and sensory characteristics of ready-to-eat sliced frozen roast beef with partial replacement of sodium chloride by a commercial additive mostly composed of potassium chloride. The analyses performed were chemical composition, cooking yield and post defrosting loss, microbiological evaluation and sensory analysis. There was higher moisture content (p < 0.05) in the control treatment (without the presence of the replacement additive) and all treatments were not different (p ≥ 0.05) in the cooking yield and in post-defrosting loss. The results of microbiological analysis are according to Brazilian Legislation. The sensory evaluation showed no difference between the control treatment and the T1 treatment (with the reduction of 35% of NaCl), while the T2 treatment (with reduction of 70% of NaCl) had the lowest average values in all attributes. The study showed that the reduction of 35% NaCl for commercial additive, mostly composed of potassium chloride, in roast beef is feasible since no changes were observed in sensory and technological characteristics evaluated.

Spectral characteristics of bacteriorhodopsin water solution

The object of the study is bacteriorhodopsin. This light-sensitive protein have been selected as perspective substance for optical and optoelectronic applications. Bacteriorhodopsin carries out pumping protons through the cell membrane. Biomolecule converts light into an electric signal when sandwiched between electrodes. These properties were utilized in this research to implement photosensors on the basis of BR layers. These properties were utilized in this research to the bR water solution. According to the absorption spectra and using Kramers – Kronig relation the extinction coefficient has been calculated, as well as the related change of the refractive index value.

The feasibility of torrefaction for the co-firing of wood in pulverised-fuel boilers

Torrefaction is the partial pyrolysis of wood characterised by thermal degradation of predominantly hemicellulose under inert atmosphere. Torrefaction can be likened to coffee roasting but with wood in place of beans. This relatively new process concept makes wood more like coal. Torrefaction has attracted interest because it potentially enables higher rates of co-firing in existing pulverised-coal power plants and hence greater net CO2 emission reductions. Academic and entrepreneurial interest in torrefaction has sky rocketed in the last decade. Research output has focused on the many aspects of torrefaction – from detailed chemical changes in feedstock to globally-optimised production and supply scenarios with which to sustain EU emission-cutting directives. However, despite its seemingly simple concept, torrefaction has retained a somewhat mysterious standing. Why hasn’t torrefied pellet production become fully commercialised? The question is one of feasibility. This thesis addresses this question. Herein, the feasibility of torrefaction in co-firing applications is approached from three directions. Firstly, the natural limitations imposed by the structure of wood are assessed. Secondly, the environmental impact of production and use of torrefied fuel is evaluated and thirdly, economic feasibility is assessed based on the state of the art of pellet making. The conclusions reached in these domains are as follows. Modification of wood’s chemical structure is limited by its naturally existing constituents. Consequently, key properties of wood with regards to its potential as a co-firing fuel have a finite range. The most ideal benefits gained from wood torrefaction cannot all be realised simultaneously in a single process or product. Although torrefaction at elevated pressure may enhance some properties of torrefied wood, high-energy torrefaction yields are achieved at the expense of other key properties such as heating value, grindability, equilibrium moisture content and the ability to pelletise torrefied wood. Moreover, pelletisation of even moderately torrefied fuels is challenging and achieving a standard level of pellet durability, as required by international standards, is not trivial. Despite a reduced moisture content, brief exposure of torrefied pellets to water from rainfall or emersion results in a high level of moisture retention. Based on the above findings, torrefied pellets are an optimised product. Assessment of energy and CO2-equivalent emission balance indicates that there is no environmental barrier to production and use of torrefied pellets in co-firing. A long product transport distance, however, is necessary in order for emission benefits to exceed those of conventional pellets. Substantial CO2 emission reductions appear possible with this fuel if laboratory milling results carry over to industrial scales for direct co-firing. From demonstrated state-of-the-art pellet properties, however, the economic feasibility of torrefied pellet production falls short of conventional pellets primarily due to the larger capital investment required for production. If the capital investment for torrefied pellet production can be reduced significantly or if the pellet-making issues can be resolved, the two production processes could be economically comparable. In this scenario, however, transatlantic shipping distances and a dry fuel are likely necessary for production to be viable. Based on demonstrated pellet properties to date, environmental aspects and production economics, it is concluded that torrefied pellets do not warrant investment at this time. However, from the presented results, the course of future research in this field is clear.