Oral tolerance induction with altered forms of ovalbumin

As a T cell-dependent phenomenon, oral tolerance is not expected to depend necessarily on native configuration of antigens. We investigated the induction of oral tolerance with modified ovalbumin (Ova). Oral administration of heat-denatured (HD-Ova) and cyanogen bromide-degraded ovalbumin was less effective than native Ova in inducing oral tolerance in B6D2F1 mice. HD-Ova was effective in suppressing delayed-type hypersensitivity (DTH) reactions but did not suppress specific antibody formation. Injection of Ova directly into the stomach, but not into the ileum or cecum, suppressed subsequent immunization to DTH reactions. Gavage with protease inhibitors (aprotinin or ovomucoid) before gavage with Ova was ineffective in blocking tolerance induction. Treatment with hydroxyurea to destroy cycling cells 24 h before gavage with Ova blocked oral tolerance induction and also the possibility to passively transfer tolerance to naive recipients with the serum of mice gavaged with Ova 1 h before. The implications of these findings about oral tolerance induction are discussed

Interrelationship between adipocytes and fibroblasts during acute damage to the subcutaneous adipose tissue of rats: an ultrastructural study

Ultrastructural phenotypic transitional features were noted between adult adipocytes and fibroblasts in the subcutaneous adipose tissue of the dorsal pad of normal adult Wistar rats of both sexes, weighing 180-260 g, after acute injury either by the implantation of small (1.8 x 1 x 0.4 cm) perforated plastic boxes or by local heat application. Soon after the inflicted damage, fat-containing cells presented variable shapes. Early after damage, some of these cells were round, adipocyte-like, with numerous and large cytoplasmic fat droplets. A few days later, fat-containing cells became elongated, with the fat droplets in their cytoplasm becoming smaller and less numerous. The cells also showed a prominent active rough endoplasmic reticulum and newly formed collagenous matrix accumulated in the interstices. Although current views consider adult adipocytes to be terminal cells, the present findings, in their time sequence, strongly suggest the transformation of adipocytes into fibroblasts after acute injury to adipose tissue.

Liquid cooling solutions for rotating permanent magnet synchronous machines

In the design of electrical machines, efficiency improvements have become very important. However, there are at least two significant cases in which the compactness of electrical machines is critical and the tolerance of extremely high losses is valued: vehicle traction, where very high torque density is desired at least temporarily; and direct-drive wind turbine generators, whose mass should be acceptably low. As ever higher torque density and ever more compact electrical machines are developed for these purposes, thermal issues, i.e. avoidance of over-temperatures and damage in conditions of high heat losses, are becoming of utmost importance. The excessive temperatures of critical machine components, such as insulation and permanent magnets, easily cause failures of the whole electrical equipment. In electrical machines with excitation systems based on permanent magnets, special attention must be paid to the rotor temperature because of the temperature-sensitive properties of permanent magnets. The allowable temperature of NdFeB magnets is usually significantly less than 150 ˚C. The practical problem is that the part of the machine where the permanent magnets are located should stay cooler than the copper windings, which can easily tolerate temperatures of 155 ˚C or 180 ˚C. Therefore, new cooling solutions should be developed in order to cool permanent magnet electrical machines with high torque density and because of it with high concentrated losses in stators. In this doctoral dissertation, direct and indirect liquid cooling techniques for permanent magnet synchronous electrical machines (PMSM) with high torque density are presented and discussed. The aim of this research is to analyse thermal behaviours of the machines using the most applicable and accurate thermal analysis methods and to propose new, practical machine designs based on these analyses. The Computational Fluid Dynamics (CFD) thermal simulations of the heat transfer inside the machines and lumped parameter thermal network (LPTN) simulations both presented herein are used for the analyses. Detailed descriptions of the simulated thermal models are also presented. Most of the theoretical considerations and simulations have been verified via experimental measurements on a copper tooth-coil (motorette) and on various prototypes of electrical machines. The indirect liquid cooling systems of a 100 kW axial flux (AF) PMSM and a 110 kW radial flux (RF) PMSM are analysed here by means of simplified 3D CFD conjugate thermal models of the parts of both machines. In terms of results, a significant temperature drop of 40 ̊C in the stator winding and 28 ̊C in the rotor of the AF PMSM was achieved with the addition of highly thermally conductive materials into the machine: copper bars inserted in the teeth, and potting material around the end windings. In the RF PMSM, the potting material resulted in a temperature decrease of 6 ̊C in the stator winding, and in a decrease of 10 ̊C in the rotor embedded-permanentmagnets. Two types of unique direct liquid cooling systems for low power machines are analysed herein to demonstrate the effectiveness of the cooling systems in conditions of highly concentrated heat losses. LPTN analysis and CFD thermal analysis (the latter being particularly useful for unique design) were applied to simulate the temperature distribution within the machine models. Oil-immersion cooling provided good cooling capability for a 26.6 kW PMSM of a hybrid vehicle. A direct liquid cooling system for the copper winding with inner stainless steel tubes was designed for an 8 MW directdrive PM synchronous generator. The design principles of this cooling solution are described in detail in this thesis. The thermal analyses demonstrate that the stator winding and the rotor magnet temperatures are kept significantly below their critical temperatures with demineralized water flow. A comparison study of the coolant agents indicates that propylene glycol is more effective than ethylene glycol in arctic conditions.

Coupling of palmitate to ovalbumin inhibits the induction of oral tolerance

Oral tolerance is a phenomenon that may occur in animals exposed to protein antigens for the first time by the oral route. They become unable to produce immune responses at the levels normally observed when they are immunized parenterally with antigen in the presence of adjuvants. Lipids have been used as adjuvants for both parenteral and oral immunization. In the present study we coupled ovalbumin with palmitate residues by incubating the protein with the N-hydroxysuccinimide palmitate ester and tested the preparation for its ability to induce oral tolerance. This was performed by giving 20 mg of antigen to mice by the oral route 7 days prior to parenteral immunization in the presence of Al(OH)3. Mice were bled one week after receiving a booster that was given 2 weeks after primary immunization. Specific antibodies were detected by ELISA. Despite the fact that the conjugates are as immunogenic as the unmodified protein when parenterally injected in mice, they failed to induce oral tolerance. This discrepancy could be explained by differences in the intestinal absorption of the two forms of the antigen. In fact, when compared to the non-conjugated ovalbumin, a fast and high absorption of the lipid-conjugated form of ovalbumin was observed by "sandwich" ELISA.