Virtual reality Post Traumatic Stress Disorder (PTSD) exposure therapy results with active duty Iraq war combatants

Post Traumatic Stress Disorder (PTSD) is reported to be caused by traumatic events that are outside the range of usual human experience including (but not limited to) military combat, violent personal assault, being kidnapped or taken hostage and terrorist attacks. Initial data suggests that at least 1 out of 6 Iraq War veterans are exhibiting symptoms of depression, anxiety and PTSD. Virtual Reality (VR) delivered exposure therapy for PTSD has been used with reports of positive outcomes. The aim of the current paper is to present the rationale and brief description of a Virtual Iraq PTSD VR therapy application and present initial findings from its use with PTSD patients. Thus far, Virtual Iraq consists of a series of customizable virtual scenarios designed to represent relevant Middle Eastern VR contexts for exposure therapy, including a city and desert road convoy environment. User-centered design feedback needed to iteratively evolve the system was gathered from returning Iraq War veterans in the USA and from a system deployed in Iraq and tested by an Army Combat Stress Control Team. Results from an open clinical trial at San Diego Naval Medical Center of the first 18 treatment completers indicate that 14 no longer meet PTSD diagnostic criteria at post-treatment, with only one not maintaining treatment gains at 3 month follow-up. Clinical tests are also currently underway at Ft. Lewis, Emory University, Weill Cornell Medical College, Walter Reed Army Medical Center and 10 other sites. Other sites are preparing to use the application for a variety of PTSD and VR research purposes.

3D surface point and wireframe reconstruction from multiview photographic images

This paper describes a new method for reconstructing 3D surface points and a wireframe on the surface of a freeform object using a small number, e.g. 10, of 2D photographic images. The images are taken at different viewing directions by a perspective camera with full prior knowledge of the camera configurations. The reconstructed surface points are frontier points and the wireframe is a network of contour generators. Both of them are reconstructed by pairing apparent contours in the 2D images. Unlike previous works, we empirically demonstrate that if the viewing directions are uniformly distributed around the object's viewing sphere, then the reconstructed 3D points automatically cluster closely on a highly curved part of the surface and are widely spread on smooth or flat parts. The advantage of this property is that the reconstructed points along a surface or a contour generator are not under-sampled or under-represented because surfaces or contours should be sampled or represented with more densely points where their curvatures are high. The more complex the contour's shape, the greater is the number of points required, but the greater the number of points is automatically generated by the proposed method. Given that the viewing directions are uniformly distributed, the number and distribution of the reconstructed points depend on the shape or the curvature of the surface regardless of the size of the surface or the size of the object. The unique pattern of the reconstructed points and contours may be used in 31) object recognition and measurement without computationally intensive full surface reconstruction. The results are obtained from both computer-generated and real objects. (C) 2007 Elsevier B.V. All rights reserved.

Optimal 3D surface reconstruction from a small number of conventional 2D X-ray images

This paper describes a method for reconstructing 3D frontier points, contour generators and surfaces of anatomical objects or smooth surfaces from a small number, e. g. 10, of conventional 2D X-ray images. The X-ray images are taken at different viewing directions with full prior knowledge of the X-ray source and sensor configurations. Unlike previous works, we empirically demonstrate that if the viewing directions are uniformly distributed around the object's viewing sphere, then the reconstructed 3D points automatically cluster closely on a highly curved part of the surface and are widely spread on smooth or flat parts. The advantage of this property is that the reconstructed points along a surface or a contour generator are not under-sampled or under-represented because surfaces or contours should be sampled or represented with more densely points where their curvatures are high. The more complex the contour's shape, the greater is the number of points required, but the greater the number of points is automatically generated by the proposed method. Given that the number of viewing directions is fixed and the viewing directions are uniformly distributed, the number and distribution of the reconstructed points depend on the shape or the curvature of the surface regardless of the size of the surface or the size of the object. The technique may be used not only in medicine but also in industrial applications.

Effects of biologically active tumour-promoting and non-promoting phorbol esters on in vivo growth of melanocytic cells

Sapintoxin A (SAP A), a naturally occurring biologically active but non-promoting phorbol ester, acts as an effective in vitro mitogen for freshly derived human melanocytes. Seven days after addition of 50 nM SAP A there was a four to fivefold increase in melanocyte number over that observed in untreated control cultures comparable to that achieved with a 50 nM concentration of 12-0-tetradecanoylphorbol 13-acetate (TPA). The fluorescent stage 2 promoter sapintoxin D (SAP D) also supported the growth of these cells, with a 50 nM dose producing an increase in cell number comparable to that observed with 200 nM TPA. Similar results were obtained with an established, but non-tumorigenic, line of murine melanocytes. The same compounds exerted a potent anti-proliferative effect against transformed melanocyte lines of murine and human origin associated with morphological alterations and an increase in melanin production consistent with induced cytodifferentiation.

Extracts of tropical African spices are active against Plutella xylostella

Extracts from Piper guineense, Aframomum melegueta, Aframomum citratum and Afrostyrax kamerunensis were investigated for their antifeedant, lethal and developmental effects against Plutella xylostella larvae through laboratory dual-choice tests and topical application. Water and ethanol extracts of P. guineense were dose-dependent antifeedants at concentrations ≥300 and 500 ppm, respectively, whilst methanol extracts required ≥1,000 ppm. Methanol and hexane extracts of A. melegueta acted at ≥100 ppm and water extracts at ≥300 ppm, but ethanol extracts were deterring feeding only slightly at ≥1,000 ppm. Hexane and methanol extracts of A. citratum inhibited feeding at ≥300 ppm and water extracts did so at ≥500 ppm. None of the Afrostyrax kamerunensis extracts deterred feeding at any of the concentrations tested. No mortality was observed at any of the concentrations after topical application of the extracts on the larvae. However, the effects on larval development varied with extract concentration and larval age. Ingestion of the water and ethanol extracts of P. guineense caused 100% mortality of second instars at ≥100 ppm two to three days after infestation (DAI). Methanol and water extracts of A. melegueta and A. citratum, respectively, achieved ≥80% mortality of larvae at concentrations of ≥500 ppm and ≥1,000 ppm, respectively. With third instars, the mortalities were significantly lower; however, the P. guineense water or ethanol extracts caused 100% mortality two to four DAI. Larvae that survived till pupation had significantly longer larval periods compared with the control after application of A. melegueta extracts. We concluded that potent extracts from Aframomum melegueta, Aframomum citratum and especially P. guineense could be used as complementary measures in the management of P. xylostella by subsistence farmers.

Electronic transitions and bonding properties in a series of five-coordinate “16-electron” complexes [Mn(CO)3(L2)]− (L2=chelating redox-active π-donor ligand)

In this article we present for the first time accurate density functional theory (DFT) and time-dependent (TD) DFT data for a series of electronically unsaturated five-coordinate complexes [Mn(CO)(3)(L-2)](-), where L-2 stands for a chelating strong pi-donor ligand represented by catecholate, dithiolate, amidothiolate, reduced alpha-diimine (1,4-dialkyl-1,4-diazabutadiene (R-DAB), 2,2'-bipyridine) and reduced 2,2'-biphosphinine types. The single-crystal X-ray structure of the unusual compound [Na(BPY)][Mn(CO)(3)(BPY)]center dot Et2O and the electronic absorption spectrum of the anion [Mn(CO)(3)(BPY)](-) are new in the literature. The nature of the bidentate ligand determines the bonding in the complexes, which varies between two limiting forms: from completely pi-delocalized diamagnetic {(CO)(3)Mn-L-2}(-) for L-2 = alpha-diimine or biphosphinine, to largely valence-trapped {(CO)(3)Mn-1-L-2(2-)}(-) for L-2(2-) = catecholate, where the formal oxidation states of Mn and L-2 can be assigned. The variable degree of the pi-delocalization in the Mn(L-2) chelate ring is indicated by experimental resonance Raman spectra of [Mn(CO)(3)(L-2)](-) (L-2=3,5-di-tBu-catecholate and iPr-DAB), where accurate assignments of the diagnostically important Raman bands have been aided by vibrational analysis. The L-2 = catecholate type of complexes is known to react with Lewis bases (CO substitution, formation of six-coordinate adducts) while the strongly pi-delocalized complexes are inert. The five-coordinate complexes adopt usually a distorted square pyramidal geometry in the solid state, even though transitions to a trigonal bipyramid are also not rare. The experimental structural data and the corresponding DFT-computed values of bond lengths and angles are in a very good agreement. TD-DFT calculations of electronic absorption spectra of the studied Mn complexes and the strongly pi-delocalized reference compound [Fe(CO)(3)(Me-DAB)] have reproduced qualitatively well the experimental spectra. Analyses of the computed electronic transitions in the visible spectroscopic region show that the lowest-energy absorption band always contains a dominant (in some cases almost exclusive) contribution from a pi(HOMO) -> pi*(LUMO) transition within the MnL2 metallacycle. The character of this optical excitation depends strongly on the composition of the frontier orbitals, varying from a partial L-2 -> Mn charge transfer (LMCT) through a fully delocalized pi(MnL2) -> pi*(MnL2) situation to a mixed (CO)Mn -> L-2 charge transfer (LLCT/MLCT). The latter character is most apparent in the case of the reference complex [Fe(CO)(3)(Me-DAB)]. The higher-lying, usually strongly mixed electronic transitions in the visible absorption region originate in the three lower-lying occupied orbitals, HOMO - 1 to HOMO - 3, with significant metal-d contributions. Assignment of these optical excitations to electronic transitions of a specific type is difficult. A partial LLCT/MLCT character is encountered most frequently. The electronic absorption spectra become more complex when the chelating ligand L-2, such as 2,2'-bipyridine, features two or more closely spaced low-lying empty pi* orbitals.