Acoplador e linha de lâmina unilateral e bilateral com substrato fotônico

The aim of this work is to characterize and use the characteristic parameters of the planar structures constructed with fin lines looking for their applications in devices, using PBG Photonic Band Gap photonic materials as substrate, operating in the millimeter and optic wave bands.The PBG theory will be applied for the relative permittivity attainment for the PBG photonic substrate s and p polarizations. The parameters considered in the structures characterization are the complex propagation constant and the characteristic impedance of unilateral and bilateral fin lines that were obtained by the use of the TTL Transverse Transmission Line Method, together with the Method of the Moments. The final part of this work comprises studies related to the behavior of the asymmetric unilateral fin line coupler with photonic substrate. This research opens perspectives for new works in this modern area. Numerical results are shown by means of bi-dimensional and three-dimensional graphics. Conclusions and suggestions for future works are also presented

Otimização do controle eletrônico do diagrama de radiação de arranjos de antenas usando algoritmos genéticos com codificação real

Antenna arrays are able to provide high and controlled directivity, which are suitable for radiobase stations, radar systems, and point-to-point or satellite links. The optimization of an array design is usually a hard task because of the non-linear characteristic of multiobjective, requiring the application of numerical techniques, such as genetic algorithms. Therefore, in order to optimize the electronic control of the antenna array radiation pattem through genetic algorithms in real codification, it was developed a numerical tool which is able to positioning the array major lobe, reducing the side lobe levels, canceling interference signals in specific directions of arrival, and improving the antenna radiation performance. This was accomplished by using antenna theory concepts and optimization methods, mainly genetic algorithms ones, allowing to develop a numerical tool with creative genes codification and crossover rules, which is one of the most important contribution of this work. The efficiency of the developed genetic algorithm tool is tested and validated in several antenna and propagation applications. 11 was observed that the numerical results attend the specific requirements, showing the developed tool ability and capacity to handle the considered problems, as well as a great perspective for application in future works.

Predicao de campo em comunicacao sem fio

Even living in the XXI century are still some difficulties in access to broadband Internet in several Brazilian cities, due to the purchasing power of people and lack of government investment. But even with these difficulties, we seek to encourage the use of wireless technology, which is based on the IEEE 802.11b protocol - also known as Wi-Fi (Wireless Fidelity) Wireless Fidelity Communications, having wide range of commercial applications in the world market, nationally and internationally. In Brazil, this technology is in full operation in major cities and has proved attractive in relation to the access point to multipoint and point-to-point. This paper is a comparative analysis of prediction field, using models based on the prediction of propagation loss. To validate the techniques used here, the Okumura-Hata models, modified Okumura-Hata, Walfisch-Ikegami model, were applied to a wireless computer network, located in the neighborhood of Cajupiranga in the city of Melbourn, in Rio Grande do Norte . They are used for networking wireless 802.11b, using the Mobile Radio to measure signal levels, beyond the heights of the antennas and distances from the transmitter. The performance data versus distance are added to the graphs generated and compared with results obtained through calculations of propagation models

Análise espectral de reflectarrays com substratos de duas camadas dielétricas anisotrópicas uniaxiais

Recently, an amazing development has been observed in telecommunication systems. Two good examples of this development are observed in mobile communication and aerospace systems. This impressive development is related to the increasing need for receiving and transmitting communication signals. Particularly, this development has required the study of new antennas and filters. This work presents a fullwave analysis of reflectarrays. The considered structures are composed by arrays of rectangular conducting patches printed on multilayer dieletric substrates, that are mounted on a ground plane. The analysis is developed in the spectral domain, using an equivalent transmission line method in combination with Galerkin method. Results for the reflection coefficient of these structures are presented and compared to those available in the literature. A good agreement was observed. Particularly, the developed analysis uses the transmission lines theory in combination with the incident potentials and the field continuity equations, at the structures interfaces, for obtaining the scattered field components expressions as function of the patch surface currents and of the incident field. Galerkin method is used to determine the unknown coefficients in the boundary value problem. Curves for the reflection coefficient of several reflectarray geometries are presented as function of frequency and of the structural parameters

Análise do espalhamento espectral em superfícies de estruturas complexas para comunicações móveis

In this work, the transmission line method is explored on the study of the propagation phenomenon in nonhomogeneous walls with finite thickness. It is evaluated the efficiency and applicability of the method, considering materials like gypsum, wood and brick, found in the composition of the structures of walls in question. The results obtained in this work are compared to those available in the literature, for several particular cases. A good agreement is observed, showing that the performed analysis is accurate and efficient in modeling, for instance, the wave propagation through building walls and integrated circuit layers in mobile communication and radar system applications. Later, simulations of resistive sheets devices such as Salisbury screens and Jaumann absorbers and of transmission lines made of metal-insulator-semiconductor (MIS) are made. Thereafter, it is described a study on frequency surface selective structures (FSS). It is proposed the development of devices and microwave integrated circuits (MIC) of such structures, for the accomplishment of experiments. Finally, future works are suggested, for instance, on the development of reflectarrays, frequency selective surfaces with dissimilar elements, and coupled frequency selective surfaces with elements located on different layers

Efeito de diferentes porta-enxertos no vigor e produtividade da laranjeira 'pera' (Citrus sinensis L.) Osbeck)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Avaliação da época de estaquia e uso de bioregulador no enraizamento de estacas de figueira

O trabalho objetivou avaliar a propagação da figueira com estacas semilenhosas, empregando-se concentrações de ácido indolbutírico, em diferentes épocas de coleta. O material propagativo utilizado foi proveniente de figueiras da cv. Roxo de Valinhos, com 5 anos de idade. As estacas foram retiradas por ocasião da poda hibernal, no final dos meses de agosto, setembro e outubro, as quais foram tratadas com AIB preparado em pó, nas seguintes concentrações: 0 (testemunha); 2.500; 5.000; 7.500 e 10.000 mg kg-1. Posteriormente, foram colocadas para enraizar em bandejas de polipropileno, tendo como substrato vermiculita e mantidas sob nebulização intermitente por 70 dias. Decorrido esse período, avaliaram-se a porcentagem de estacas enraizadas (%), o comprimento da maior raiz (cm) e a massa seca das raízes (g). O delineamento experimental utilizado foi o inteiramente casualizado, em esquema fatorial 3 x 5. Observou-se que estacas provenientes do tratamento-testemunha e da poda de agosto apresentaram baixa porcentagem de enraizamento (20%), menor comprimento e massa seca de raiz, necessitando de tratamento com AIB na concentração de 2.500 mg kg-1, que aumentou significativamente esta porcentagem (90%). Estacas oriundas da poda de setembro e outubro não necessitaram de tratamento com AIB para conseguirem um elevado enraizamento. O mês de setembro foi o mais viável para a coleta de estacas de figueira, pois houve maior porcentagem de enraizamento das estacas (95-100%). As estacas tratadas com 7.500 e 10.000 mg kg-1 de AIB apresentaram as mais baixas porcentagens de enraizamento nos meses de agosto e outubro.

Aplicação do método LTT às estruturas retangulares e triangulares em multicamadas e empilhadas em substratos PBG para comunicações móveis

Recently the planar antennas have been studied due to their characteristics as well as the advantages that they offers when compared with another types of antennas. In the mobile communications area, the need for this kind of antennas have became each time bigger due to the intense increase of the mobile communications that needs of antennas which operate in multifrequency and wide bandwidth. The microstrip antennas presents narrow bandwidth due the loss in the dielectric generated by radiation. Another limitation is the radiation pattern degradation due the generation of surface waves in the substrate. In this work some used techniques to minimize the disadvantages (previously mentioned) of the use of microstrip antennas are presented, those are: substrates with PBG material - Photonic Bandgap, multilayer antennas and with stacked patches. The developed analysis in this work used the TTL - Transverse Transmission Line method in the domain of Fourier transform, that uses a component of propagation in the y direction (transverse to the direction real of propagation z), treating the general equations of electric and magnetic field as functions of y and y . This work has as objective the application of the TTL method to microstrip structures with single and multilayers of rectangular and triangular patches, to obtaining the resonance frequency and radiation pattern of each structure. This method is applied for the treatment of the fields in stacked structures. The Homogenization theory will be applied to obtaining the effective permittivity for s and p polarizations of the substrate composed of PBG material. Numerical results for the triangular and rectangular antennas with single layer, multilayers resonators with triangular and rectangular patches are presented (in photonic and isotropic substrates). Conclusions and suggestions for continuity of this work are presented

Enraizamento de estacas lenhosas e semilenhosas de cultivares de ameixeira com várias concentrações de ácido indolbutírico

Para avaliar o potencial de enraizamento de estacas de ramos lenhosos e semilenhosos de cultivares de ameixeira (Carmesin, Gema de Ouro, Januária e Reubennel), utilizou-se aplicação exógena de ácido indolbutírico (IBA) em diferentes concentrações (0; 1000; 2000 e 3000mg L-1). O trabalho foi desenvolvido na Universidade Federal de Lavras (UFLA) (Lavras-MG), em 1997. Após os tratamentos, as estacas foram plantadas em areia lavada e colocadas em casa de sombreamento (lenhosas) e em casa de vegetação (semilenhosas) para enraizar. Foram avaliadas as variáveis porcentagem de enraizamento, número e comprimento de raízes. As maiores porcentagens de enraizamento foram obtidas com estacas semilenhosas da cultivar Januária (54,62%). A aplicação de IBA favoreceu o enraizamento, a formação de maior número de raízes e o comprimento de raízes nas estacas semilenhosas.

Utilização do Linux como ferramanenta antivírus em redes corporativas

Apresentamos um sistema implementado em Linux® com o intuito de proteger redes contendo estações de trabalho Windows® contra agentes maliciosos. O sistema, denominado LIV - Linux® Integrated Viruswall, agrega características existentes em outras soluções e acrescenta novas funcionalidades. Uma das funcionalidades implementadas é a capacidade de detecção de estações de trabalho contaminadas tendo como base a análise do tráfego de rede. Outra é o uso de uma técnica denominada compartilhamento armadilha para identificar agentes maliciosos em propagação na rede local. Uma vez detectado um foco de contaminação, o LIV é capaz de isolá-lo da rede, contendo a difusão do agente malicioso. Resultados obtidos pelo LIV na proteção de uma rede corporativa demonstram a eficácia da análise do tráfego de rede como instrumento de detecção de agentes maliciosos, especialmente quando comparada a mecanismos tradicionais de detecção, baseados exclusivamente em assinaturas digitais de códigos maliciosos