1000 resultados para Planejamento Ambiental


Relevância:

20.00% 20.00%

Publicador:

Resumo:

Mercury kept in a garage of a residencial building in Rio de Janeiro was accidentally released and caused local (environmental and human) contamination. The concentration of mercury in indoor air of the most critical site reached 15.5 mg/m³. Outdoor air samples showed concentrations ranging from 0.37 to 6.6 mg/m³ . Seventy five per cent of the urine samples collected from 22 residents in the contaminated building showed levels of mercury higher than those observed in non exposed individuals (>6.9 mg/L); in 30% of these samples, the concentration was higher than 20 mg/L. These values show a high level of human contamination and the final consequences were not so serious owing to the quick action taken by one of the residents.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This article gives some basic principles of heterogeneous photocatalysis using titanium dioxide as photocatalyst and the state of art of its applications to the abatement of aqueous and atmospheric pollutants.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Short review about the main aspects of prodrug design, as its objectives, applicability and importance, showing the new trends in the research for selective latent forms, namely targeted drugs.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This work considers mainly the problem of environmental pollution due to the production of energy by burning fossil fuels, particularly in urban vehicles. Electrochemical energy conversion is proposed as a partial solution to this problem, through the use of hydrogen in fuel cells. In both the production of hydrogen by electrolysis and in the electrochemical processes in fuel cells, the key factor is electrocatalysis. The concept of electrocatalysis, the production of catalysts and supported catalysts and their use in practical systems for the conversion of energy is discussed.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Phenols are widely used in many areas and commonly found as industrial by-products. A great number of agricultural and industrial activities realise phenolic compounds in the environmental. Waste phenols are produced mainly by the wood-pulp industry and during production of synthetic polymers, drugs, plastics, dyes, pesticides and others. Phenols are also released into the environmental by the degradation of pesticides with phenolic skeleton. The phenols level control is very important for the environmental protection. Amperometric biosensor has shown the feasibility to complement laboratory-based analytical methods for the determination of phenolic compounds, providing alternatives to conventional methods which have many disadvantages. This brief review considers the evolution of an approach to amperometric measurement using the catalytic properties of some enzymes for phenolic compounds monitoring.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

In the area of drug discovery, natural products represent a myriad of templates for new lead discovery. It is, however, most unlikely that the bioactive principle itself shall become a drug; it is much more likely that a medicinal chemistry project needs to be initiated as soon the potency or selectivity or specificity of the new natural product candidate has been disclosed. Brazil has an enormous biodiversity where just a few has been disclosed. Nevertheless, it urges to initiate a joint collaboration in order to circumvent a major breakdown linking between natural products and medicinal chemistry in this country. This paper is intended to encourage people to follow up one of the most pushing forward enterprise that needs to be settled: the pharmaceutical industry.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Pollen allergy has a remarkable clinical impact all over Europe, and there are evidences that the prevalence of allergic respiratory induced reactions by pollen in Europe has been increasing in recent decades. The presence of potentially allergenic ornamental species in the town of Tiana, representing 41% of total species recorded. Approximately 28% of these species are Platanus acerifolia. This study attempts to relate the effect it has on the people’s health, the presence of certain urban ornamental plants by identifying and locating the ornamental trees in the town.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This work describes a factorial design for the optimization of pyrolysis and atomization temperatures in ETAAS. As examples, Cd and Pb were determined using lower pyrolysis and atomization temperatures and Al and Mo with higher pyrolysis and atomization temperatures. Good results were obtained for Cd employing Rh (m o = 1.4 pg) as a permanent modifier with pyrolysis and atomization temperatures of 640 and 1500 °C, respectively. For Zr, W or Zr+W, the Cd pyrolysis and atomization temperatures were 500 and 1500 °C, respectively, with m o = 1.4 pg using Zr or W and 1.5 pg using Zr+W. The best results for Pb were those using Rh, Zr, W and Zr+Rh, obtaining characteristic masses of 42, 37, 34 and 36 pg, respectively. Pyrolysis and atomization temperatures of 910 and 1850 °C, respectively, were achieved for this metal. For Al, the best results were obtained when Zr or Zr+W were used. Mo was also tested as a possible permanent modifier for Al, but the results were not satisfactory. The results obtained for Mo without modifier were similar to those with conventional modifiers (Mg or Pd+Mg) and the results obtained using permanent chemical modifiers were not satisfactory. In all situations, the experiments were performed faster than those using the univariate procedure.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The oxidation process of sulfur(IV) species by oxygen, ozone and nitrogen oxides, catalysed by trace metal ions, can play an important role in atmospheric chemistry processes like acid rain, visibility degradation and health hazard. An overview of the more relevant investigations on emissions sources, aqueous phase conversion process and environmental impact is presented.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

El actual incremento de medusas en las costas mediterráneas, percibido como un factor negativo en la calidad de las playas, supone un factor reductor de la demanda turística en las ubicaciones costeras, sobre todo en aquellas más afectadas por éstas proliferaciones. Debido a que la época de mayor presencia de fitoplacton disponible (principal fuente de alimento de las medusas), relacionada a la alta incidencia lumínica, coincide con la temporada alta de turismo en el verano; las notificaciones de incidencias por picaduras de medusa en esta época son frecuentes. Ejemplo de ello, es el caso de Denia (Alicante, España) donde, desde 2008, se ha detectado un considerable aumento de incidencias sanitarias a causa de picaduras de medusa, paralela a la aparición de la especie invasora de cubomedusa Carybdea marsupialis (Bordehore et al, 2011). En este estudio se ha realizado una valoración económica de la playa como un bien ambiental recreativo, mediante encuestas semi-estructuradas elaboradas por Paulo Nunes (CIESM), aplicadas a una muestra inicial de 300 individuos; y evaluado cual sería el impacto social y económico en la valoración ambiental de Denia, si las proliferaciones de medusa no se estabilizaran. Se ha estimado el valor económico del impacto sicial causado por las bioinvasiones marinas en las playas recreacionistas según Nunes and Van den Bergh (2004) y Nunes and Markandya (2008); el método que también ha sido aplicado en el mismo estudio aplicado en Israel (B. Galil, J. Gowdy and P. Nunes 2012) y en Cataluña (2013, Paulo Nunes, M. Loureiro, L. Piñol, S. Sastre, L. Voltaire). En ambos casos los resultados en el impacto económico son considerables pero menores a los esperados, al igual que en los resultados obtenidos en Denia (Alicante).