Injuries due to sharp trauma detected by post-mortem multislice computed tomography (MSCT): a feasibility study

Modern cross-sectional imaging techniques are being increasingly implemented in forensic pathology. In order to assess the practicability of such a method, namely post-mortem multislice computed tomography (MSCT) in cases of fatal cut and stab injuries, 12 corpses underwent such an examination prior to forensic autopsy. The questions regarding detection of foreign bodies, wound channels, skeletal and organ injuries, as well as the cause of death were addressed at MSCT and autopsy. The results of the two techniques revealed that post-mortem MSCT a useful tool in the assessment of such injuries.

Angiofil-mediated visualization of the vascular system by microcomputed tomography: a feasibility study

Visualization of the vascular systems of organs or of small animals is important for an assessment of basic physiological conditions, especially in studies that involve genetically manipulated mice. For a detailed morphological analysis of the vascular tree, it is necessary to demonstrate the system in its entirety. In this study, we present a new lipophilic contrast agent, Angiofil, for performing postmortem microangiography by using microcomputed tomography. The new contrast agent was tested in 10 wild-type mice. Imaging of the vascular system revealed vessels down to the caliber of capillaries, and the digital three-dimensional data obtained from the scans allowed for virtual cutting, amplification, and scaling without destroying the sample. By use of computer software, parameters such as vessel length and caliber could be quantified and remapped by color coding onto the surface of the vascular system. The liquid Angiofil is easy to handle and highly radio-opaque. Because of its lipophilic abilities, it is retained intravascularly, hence it facilitates virtual vessel segmentation, and yields an enduring signal which is advantageous during repetitive investigations, or if samples need to be transported from the site of preparation to the place of actual analysis, respectively. These characteristics make Angiofil a promising novel contrast agent; when combined with microcomputed tomography, it has the potential to turn into a powerful method for rapid vascular phenotyping.

High precision range estimation techniques for multi-path wireless environments

Range estimation is the core of many positioning systems such as radar, and Wireless Local Positioning Systems (WLPS). The estimation of range is achieved by estimating Time-of-Arrival (TOA). TOA represents the signal propagation delay between a transmitter and a receiver. Thus, error in TOA estimation causes degradation in range estimation performance. In wireless environments, noise, multipath, and limited bandwidth reduce TOA estimation performance. TOA estimation algorithms that are designed for wireless environments aim to improve the TOA estimation performance by mitigating the effect of closely spaced paths in practical (positive) signal-to-noise ratio (SNR) regions. Limited bandwidth avoids the discrimination of closely spaced paths. This reduces TOA estimation performance. TOA estimation methods are evaluated as a function of SNR, bandwidth, and the number of reflections in multipath wireless environments, as well as their complexity. In this research, a TOA estimation technique based on Blind signal Separation (BSS) is proposed. This frequency domain method estimates TOA in wireless multipath environments for a given signal bandwidth. The structure of the proposed technique is presented and its complexity and performance are theoretically evaluated. It is depicted that the proposed method is not sensitive to SNR, number of reflections, and bandwidth. In general, as bandwidth increases, TOA estimation performance improves. However, spectrum is the most valuable resource in wireless systems and usually a large portion of spectrum to support high performance TOA estimation is not available. In addition, the radio frequency (RF) components of wideband systems suffer from high cost and complexity. Thus, a novel, multiband positioning structure is proposed. The proposed technique uses the available (non-contiguous) bands to support high performance TOA estimation. This system incorporates the capabilities of cognitive radio (CR) systems to sense the available spectrum (also called white spaces) and to incorporate white spaces for high-performance localization. First, contiguous bands that are divided into several non-equal, narrow sub-bands that possess the same SNR are concatenated to attain an accuracy corresponding to the equivalent full band. Two radio architectures are proposed and investigated: the signal is transmitted over available spectrum either simultaneously (parallel concatenation) or sequentially (serial concatenation). Low complexity radio designs that handle the concatenation process sequentially and in parallel are introduced. Different TOA estimation algorithms that are applicable to multiband scenarios are studied and their performance is theoretically evaluated and compared to simulations. Next, the results are extended to non-contiguous, non-equal sub-bands with the same SNR. These are more realistic assumptions in practical systems. The performance and complexity of the proposed technique is investigated as well. This study’s results show that selecting bandwidth, center frequency, and SNR levels for each sub-band can adapt positioning accuracy.

DIFFERENTIATING PATH AND SOURCE PROCESSES IN COMPLEX GEOLOGIC STRUCTURE THROUGH PASSIVE SEISMIC STUDIES: BERING GLACIER, ALASKA AND VILLARRICA VOLCANO, CHILE

Measuring shallow seismic sources provides a way to reveal processes that cannot be directly observed, but the correct interpretation and value of these signals depend on the ability to distinguish source from propagation effects. Furthermore, seismic signals produced by a resonating source can look almost identical to those produced by impulsive sources, but modified along the path. Distinguishing these two phenomena can be accomplished by examining the wavefield with small aperture arrays or by recording seismicity near to the source when possible. We examine source and path effects in two different environments: Bering Glacier, Alaska and Villarrica Volcano, Chile. Using three 3-element seismic arrays near the terminus of the Bering Glacier, we have identified and located both terminus calving and iceberg breakup events. We show that automated array analysis provided a robust way to locate icequake events using P waves. This analysis also showed that arrivals within the long-period codas were incoherent within the small aperture arrays, demonstrating that these codas previously attributed to crack resonance were in fact a result of a complicated path rather than a source effect. At Villarrica Volcano, seismometers deployed from near the vent to ~10 km revealed that a several cycle long-period source signal recorded at the vent appeared elongated in the far-field. We used data collected from the stations nearest to the vent to invert for the repetitive seismic source, and found it corresponded to a shallow force within the lava lake oriented N75°E and dipping 7° from horizontal. We also used this repetitive signal to search the data for additional seismic and infrasonic properties which included calculating seismic-acoustic delay times, volcano acoustic-seismic ratios and energies, event frequency, and real-time seismic amplitude measurements. These calculations revealed lava lake level and activity fluctuations consistent with lava lake level changes inferred from the persistent infrasonic tremor.

Individual versus standard quality of life assessment in a phase II clinical trial in mesothelioma patients: feasibility and responsiveness to clinical changes

In patients with malignant pleural mesothelioma undergoing a multimodality therapy, treatment toxicity may outweigh the benefit of progression-free survival. The subjective experience across different treatment phases is an important clinical outcome. This study compares a standard with an individual quality of life (QoL) measure used in a multi-center phase II trial.

A STUDY ON THE FEASIBILITY OF UNIVERSAL CHIP CONTROL IN MACHINING

A novel solution to the long standing issue of chip entanglement and breakage in metal cutting is presented in this dissertation. Through this work, an attempt is made to achieve universal chip control in machining by using chip guidance and subsequent breakage by backward bending (tensile loading of the chip's rough top surface) to effectively control long continuous chips into small segments. One big limitation of using chip breaker geometries in disposable carbide inserts is that the application range is limited to a narrow band depending on cutting conditions. Even within a recommended operating range, chip breakers do not function effectively as designed due to the inherent variations of the cutting process. Moreover, for a particular process, matching the chip breaker geometry with the right cutting conditions to achieve effective chip control is a very iterative process. The existence of a large variety of proprietary chip breaker designs further exacerbates the problem of easily implementing a robust and comprehensive chip control technique. To address the need for a robust and universal chip control technique, a new method is proposed in this work. By using a single tool top form geometry coupled with a tooling system for inducing chip breaking by backward bending, the proposed method achieves comprehensive chip control over a wide range of cutting conditions. A geometry based model is developed to predict a variable edge inclination angle that guides the chip flow to a predetermined target location. Chip kinematics for the new tool geometry is examined via photographic evidence from experimental cutting trials. Both qualitative and quantitative methods are used to characterize the chip kinematics. Results from the chip characterization studies indicate that the chip flow and final form show a remarkable consistency across multiple levels of workpiece and tool configurations as well as cutting conditions. A new tooling system is then designed to comprehensively break the chip by backward bending. Test results with the new tooling system prove that by utilizing the chip guidance and backward bending mechanism, long continuous chips can be more consistently broken into smaller segments that are generally deemed acceptable or good chips. It is found that the proposed tool can be applied effectively over a wider range of cutting conditions than present chip breakers thus taking possibly the first step towards achieving universal chip control in machining.

Governor Tom Judge: Early Years - The Path to Becoming Montana's 18th Governor -- Sidney Armstrong, Larry Pettit & Kent Kleinkopf “In the Crucible of Change”

The dramatic period of progressive change in Montana that is documented "In the Crucible of Change" series really exploded with the election of Governors Forrest Anderson and Tom Judge. Anderson's single term saw the dispatching of the sales tax as an issue for a long period, the reorganization of the executive branch of state government and the revision of Montana's Constitution. As a former legislator, county attorney, Supreme Court justice, and Attorney General, Anderson brought unmatched experience to the governorship when elected. Tom Judge, although much younger (elected MT’s youngest governor at age 38 immediately following Anderson), also brought serious experience to the governorship: six years as a MT State Representative, two years as a MT State Senator, four years is Lieutenant Governor and significant business experience. The campaign and election of John F. Kennedy in 1960 spurred other young Americans to service, including Tom Judge. First elected in 1960, he rose rapidly through MT’s political-governmental hierarchy until he took over the governorship in time to implement many of the changes started in Governor Anderson’s term. But as a strong progressive leader in his own right, Governor Judge sponsored and implemented significant advancements of his own for Montana. Those accomplishments, however, are the subject of other films in this series. This film deals with Tom Judge’s early years – his rise to the governorship from when he returned home after college at Notre Dame and newspaper experience in Kentucky to his actual election in November 1972. That story is discussed in this episode by three major players in the effort, all directly involved in Tom Judge’s early years and path to the governorship: Sidney Armstrong, Larry Pettit and Kent Kleinkopf. Their recollections of the early Tom Judge and the period of his advancement to the governorship provide an insider’s perspective of the growth of this significant leader of the important period of progressive change documented “In the Crucible of Change.” Sidney Armstrong, President of Sidney Armstrong Consulting, serves on the board and as the Executive Director of the Greater Montana Foundation. Formerly Executive Director of the Montana Community Foundation (MCF), she has served on national committees and participated in national foundation initiatives. While at MCF, she worked extensively with MT Governors Racicot and Martz on the state charitable endowment tax credit and other endowed philanthropy issues. A member of MT Governor Thomas L. Judge’s staff in the 1970s, she was also part of Governor Brian Schweitzer’s 2004 Transition Team, continuing to serve as a volunteer advisor during his term. In the 1980s, Sidney also worked for the MT State AFL-CIO and the MT Democratic Party as well as working two sessions with the MT Senate as Assistant Secretary of the Senate and aide to the President. A Helena native, and great granddaughter of pioneer Montanans, Sidney has served on numerous nonprofit boards, and is currently a board member for the Montana History Foundation. Recently she served on the board of the Holter Museum of Art and was a Governor’s appointee to the Humanities Montana board. She is a graduate of the International School of Geneva, Switzerland and the University of Montana. Armstrong's Irish maternal immigrant great-grandparents, Thomas and Maria Cahill Cooney, came to Virginia City, MT in a covered wagon in 1865, looking for gold. Eventually, they settled on the banks of the Missouri River outside Helena as ranchers. She also has roots in Butte, MT, where her journalist father's family, both of whom were newspaper people, lived. Her father, Richard K. O’Malley, is also the author of a well-known book about Butte, Mile High, Mile Deep, recently re-published by Russell Chatham. She is the mother of four and the grandmother of eight. Dr. Lawrence K. Pettit (Larry Pettit) (b. 5/2/1937) has had a dual career in politics and higher education. In addition to being Montana’s first Commissioner of Higher Education (the subject of another film in this series); Pettit, of Lewistown, served as legislative assistant to U.S. Senators James E. Murray and Lee Metcalf, campaign manager, head of transition team and assistant to Montana Governor Thomas L. Judge; taught political science at The Pennsylvania State University (main campus), was chair of political science at Montana State University, Deputy Commissioner for Academic Programs at the Texas Higher Education Coordinating Board, Chancellor of the University System of South Texas (since merged with Texas A&M University), President of Southern Illinois University, and President of Indiana University of Pennsylvania from where he retired in 2003. He has served as chair of the Commission on Leadership for the American Council on Education, president of the National Association of (University) System Heads, and on many national and state boards and commissions in higher education. Pettit is author of “If You Live by the Sword: Politics in the Making and Unmaking of a University President.” More about Pettit is found at http://www.lawrencekpettit.com… Kent Kleinkopf of Missoula is co-founder of a firm with a national scope of business that specializes in litigation consultation, expert vocational testimony, and employee assistance programs. His partner (and wife of 45 years) Kathy, is an expert witness in the 27 year old business. Kent received a BA in History/Education from the University of Idaho and an MA in Economics from the University of Utah. The Kleinkopfs moved to Helena, MT in 1971 where he was Assistant to the Commissioner of State Lands (later Governor) Ted Schwinden. In early 1972 Kent volunteered full time in Lt. Governor Tom Judge’s campaign for Governor, driving the Lt. Governor extensively throughout Montana. After Judge was elected governor, Kent briefly joined the staff of Governor Forrest Anderson, then in 1973 transitioned to Judge’s Governor’s Office staff, where he became Montana’s first “Citizens’ Advocate.” In that capacity he fielded requests for assistance from citizens with concerns and information regarding State Agencies. While on the Governor’s staff, Kent continued as a travel aide with the governor both in Montana and nationally. In 1977 Kent was appointed Director of the MT Department of Business Regulation. That role included responsibility as Superintendent of Banking and Chairman of the State Banking Board, where Kent presided over the chartering of many banks, savings and loans, and credit unions. In 1981 the Kleinkopfs moved to Missoula and went into the business they run today. Kent was appointed by Governor Brian Schweitzer to the Board of the Montana Historical Society in 2006, was reappointed and continues to serve. Kathy and Kent have a daughter and son-in-law in Missoula.