Modelling water adsorption on Au(210) surfaces: II. Monte Carlo simulations

Canonical Monte Carlo simulations for the Au(210)/H(2)O interface, using a force field recently proposed by us, are reported. The results exhibit the main features normally observed in simulations of water molecules in contact with different noble metal surfaces. The calculations also assess the influence of the surface topography on the structural aspects of the adsorbed water and on the distribution of the water molecules in the direction normal to the metal surface plane. The adsorption process is preferential at sites in the first layer of the metal. The analysis of the density profiles and dipole moment distributions points to two predominant orientations. Most of the molecules are adsorbed with the molecular plane parallel to surface, while others adsorb with one of the O-H bonds parallel to the surface and the other bond pointing towards the bulk liquid phase. There is also evidence of hydrogen bond formation between the first and second solvent layers at the interface. (c) 2007 Elsevier B.V. All rights reserved.

Axial ligand influence on geometries, charge distributions and electronic structures of iron tetraazamacrocycle [Fe((II))TIM(X)(Y)](2+) complexes assessed by Density Functional Theory

We employed the Density Functional Theory along with small basis sets, B3LYP/LANL2DZ, for the study of FeTIM complexes with different pairs of axial ligands (CO, H(2)O, NH(3), imidazole and CH(3)CN). These calculations did not result in relevant changes of molecular quantities as bond lengths, vibrational frequencies and electronic populations supporting any significant back-donation to the carbonyl or acetonitrile axial ligands. Moreover, a back-donation mechanism to the macrocycle cannot be used to explain the observed changes in molecular properties along these complexes with CO or CH(3)CN. This work also indicates that complexes with CO show smaller binding energies and are less stable than complexes with CH(3)CN. Further, the electronic band with the largest intensity in the visible region (or close to this region) is associated to the transition from an occupied 3d orbital on iron to an empty pi* orbital located at the macrocycle. The energy of this Metal-to-Ligand Charge Transfer (MLCT) transition shows a linear relation to the total charge of the macrocycle in these complexes as given by Mulliken or Natural Population Analysis (NPA) formalisms. Finally, the macrocycle total charge seems to be influenced by the field induced by the axial ligands. (C) 2011 Elsevier Ltd. All rights reserved.

Extern Web-service-lösning vid SSAB Tunnplåt i Borlänge- för kommunikation med sina distributions lager

Detta examensarbete har utförts på SSAB- Tunnplåt i Borlänge under vårterminen 2004 och omfattar 10 veckors arbete.SSAB sköter idag sin kommunikation med distributionslagren via fax, telefon eller e-post. Eftersom detta är ett ganska tidskrävande kommunikationssätt, vill SSAB ha en smidigare och snabbare kommunikationslösning. Den lösning som SSAB vill ha är en extern Web-service-lösning för att upprätta en säker kommunikation med sina distributionslager.Parallellt med byggandet av Web-service-lösningen arbetades en förvaltningsmodell fram. Den beskriver hur förvaltningsorganisationen med dess rutiner kan se ut vid implementering av lösningen.För att skapa en säker förbindelse med Web-servicen skall en webbklient användas som i sin tur anropar en COM+ komponent. Detta för att kunna skicka med certifikatet ifrån webbklienten till webbservern där Web-servicen ligger. COM+ komponenten måste få tillgång till en användarprofil när den kommunicerar med Web-servicen. Detta för att kunna upprätta en SSL-förbindelse i det inledande skedet. SSL-förbindelsen skall läggas i den VPN-tunnel som mVPN tillhandahåller via WSSAL.

Methodological and conceptual issues in the search for a relationship between animal body-size distributions and benthic habitat architecture

Benthic ecologists have studied the distribution of animal body sizes because it is a form of ‘taxon-free’ classification that may be a useful metric for describing variation within and between ecological communities. In particular, the idea that the allometry of physiological and life-history traits may control species composition and relative abundances implies a functional link between body-size distributions and communities. The physical structure of aquatic habitats has often been cited as the mechanism by which habitat may determine body-size distributions in communities. However, further progress is hindered by a lack of theoretical clarity regarding the mechanisms that connect body size to the characteristics of ecological communities, leading to methods that may obscure interesting trends in body-size data. This review examines the methodological and conceptual issues hindering progress in the search for a relationship between animal body size and habitat architecture and suggests ways to resolve these issues. Problems are identified with current methods for the measurement of animal body size, the data and measures used to quantify body-size distributions and the methods used to identify patterns therein. Fundamentally, renewed emphasis on the mechanisms by which animal body sizes are influenced by habitat architecture is required to refine methodology and synthesise results from pattern-seeking and mechanistic studies.

Near-surface distributions of soil water and water repellency under three effluent irrigation schemes in a blue gum (Eucalyptus globulus) plantation

Water repellent soils are difficult to irrigate and susceptible to preferential flow, which enhances the potential for accelerated leaching to groundwater of hazardous substances. Over 5 Mha of Australian soil is water repellent, while treated municipal sewage is increasingly used for irrigation. Only if a critical water content is exceeded will repellent soils become wettable. To avoid excessive loss of water from the root zone via preferential flow paths, irrigation schemes should therefore aim to keep the soil wet enough to maintain soil wettability. Our objective was to monitor the near-surface water content and water repellency in a blue gum (Eucalyptus globulus) plantation irrigated with treated sewage. The plantation's sandy soil surface was strongly water repellent when dry. For 4 months, three rows of 15 blue gum trees each received no irrigation, three other rows received 50% of the estimated potential water use minus rainfall, and three more rows received 100%. During this period, 162 soil samples were obtained in three sampling rounds, and their water content (% dry mass) and degree of water repellency determined. Both high and low irrigation effectively wetted up the soil and eliminated water repellency after 2 (high) or 4 (low) months. A single-peaked distribution of water contents was observed in the soil samples, but the water repellency distribution was dichotomous, with 44% extremely water-repellent and 36% wettable. This is consistent with a threshold water content at which a soil sample changes from water repellent to wettable, with spatial variability of this threshold creating a much wider transition zone at the field scale. We characterized this transition zone by expressing the fraction of wettable samples as a function of water content, and demonstrated a way to estimate from this the wettable portion of a field from a number of water content measurements. To keep the plantation soil wettable, the water content must be maintained at a level at which a significant downward flux is likely, with the associated enhanced leaching. At water contents with negligible downward flux, the field is water repellent, and leaching through preferential flow paths is likely. Careful management is needed to resolve these conflicting requirements.

Spatial and temporal distribution of solute leaching in heterogeneous soils: analysis and application to multisampler lysimeter data

Accurate assessment of the fate of salts, nutrients, and pollutants in natural, heterogeneous soils requires a proper quantification of both spatial and temporal solute spreading during solute movement. The number of experiments with multisampler devices that measure solute leaching as a function of space and time is increasing. The breakthrough curve (BTC) can characterize the temporal aspect of solute leaching, and recently the spatial solute distribution curve (SSDC) was introduced to describe the spatial solute distribution. We combined and extended both concepts to develop a tool for the comprehensive analysis of the full spatio-temporal behavior of solute leaching. The sampling locations are ranked in order of descending amount of total leaching (defined as the cumulative leaching from an individual compartment at the end of the experiment), thus collapsing both spatial axes of the sampling plane into one. The leaching process can then be described by a curved surface that is a function of the single spatial coordinate and time. This leaching surface is scaled to integrate to unity, and termed S can efficiently represent data from multisampler solute transport experiments or simulation results from multidimensional solute transport models. The mathematical relationships between the scaled leaching surface S, the BTC, and the SSDC are established. Any desired characteristic of the leaching process can be derived from S. The analysis was applied to a chloride leaching experiment on a lysimeter with 300 drainage compartments of 25 cm2 each. The sandy soil monolith in the lysimeter exhibited fingered flow in the water-repellent top layer. The observed S demonstrated the absence of a sharp separation between fingers and dry areas, owing to diverging flow in the wettable soil below the fingers. Times-to-peak, maximum solute fluxes, and total leaching varied more in high-leaching than in low-leaching compartments. This suggests a stochastic–convective transport process in the high-flow streamtubes, while convection–dispersion is predominant in the low-flow areas. S can be viewed as a bivariate probability density function. Its marginal distributions are the BTC of all sampling locations combined, and the SSDC of cumulative solute leaching at the end of the experiment. The observed S cannot be represented by assuming complete independence between its marginal distributions, indicating that S contains information about the leaching process that cannot be derived from the combination of the BTC and the SSDC.

Distributions of caregiving tasks among family members: the place of gender and availability.

To extend family-oriented approaches to caregiving, participants in 2 studies were asked to distribute tasks among a set of adult children, first with information only about gender and then with systematically varied information about commitments to paid work, marriage, and/or parenting. Making the distributions, using a computer-based program, were 2 groups of older adults (ages 60 to 90 years). In Study 1, gender composition was kept constant (2 sons and 2 daughters). In Study 2, it was varied. The results showed several ways in which people combine attention to gender and to availability. The results also pointed to the need to consider both the number and type of tasks allocated. The results are discussed in terms of implications for the way caregiving is regarded, the development of multiple-factor models for variations among family members, and the possible replications and extensions to other circumstances and populations.

Using Excel to generate empirical sampling distributions

Teachers in many introductory statistics courses demonstrate the Central Limit Theorem by using a computer to draw a large number of random samples of size n from a population distribution and plot the resulting empirical sampling distribution of the sample mean. There are
many computer applications that can be used for this (see, for example, the Rice Virtual Lab in Statistics: http://www.ruf.rice.edu/~lane/rvls.html). The effectiveness of such demonstrations has been questioned (see delMas et al (1999))) but in the work presented in this paper we do not rely on sampling distributions to convey or teach statistical concepts; only that the sampling distribution is independent of the distribution of the population, provided the sample size is sufficiently large.

We describe a lesson that starts out with a demonstration of the CTL, but sample from a (finite) population where actual census data is provided; doing this may help students more easily relate to the concepts – they can see the original data as a column of numbers and if the samples are shown they can also see random samples being taken. We continue with this theme of sampling from census data to teach the basic ideas of inference. We end up with standard resampling/bootstrap procedures.

We also demonstrate how Excel can provide a tool for developing a learning objects to support the program; a workbook called Sampling.xls is available from www.deakin.edu.au/~rodneyc/PS > Sampling.xls.