Comparisons between Bio-Oss® and Straumann® Bone Ceramic in immediate and staged implant placement in dogs mandible bone defects

Objective: To compare immediate and staged approach implant placement in circumferential defects treated with deproteinized bovine bone mineral (DBBM); hidroxyapatite/tricalcium phosphate (HA/TP); autogenous bone (Ab); and coagulum (Cg); upon implant stability, osseointegration and alveolar crest maintenance. Materials and methods: Six dogs underwent extractions of lower premolars, bilaterally. Twelve weeks later four bone defects (6 mm wide/4 mm long) were drilled at one side and randomly filled with DBBM; HA/TP; Ab; and Cg, respectively, and left to heal (staged approach). Eight weeks later one implant (Osseospeed™, AstraTech) was placed in experimental sites. At the same session four defects were drilled on contra-lateral side and implants were inserted immediately after biomaterials grafting (immediate approach). Animals were euthanized 8 weeks later. Implant stability was measured by resonance frequency analysis (RFA) at installation and after sacrifice. Ground sections were prepared for bone contact (BIC); bone area (BA); distance implant shoulder-bone crest (IS-C); distance implant shoulder first bone contact (IS-B); and areas occupied by soft tissue. Results: The BA and BIC were superior in the staged approach. The Cg exhibited higher BIC and BA as compared with other materials at the total implant body (P = 0.004 and 0.012, respectively). The DBBM, HA/TP and Ab groups rendered similar BA and BIC. The immediate approach resulted in less crest resorption compared to staged approach. The biomaterials did not affect the IS-C and IS-B measurements. Particles area tended to be higher in DBBM group than HA/TP (P = 0.15), while soft tissue infiltrate was higher in DBBM group when used in the immediate approach (P = 0.04). The RFA indicated gain in stability in the staged approach (P = 0.002). The correlation test between RFA vs. BIC and BA demonstrated inferior stability for DBBM group in immediate approach (P = 0.01). Conclusions: Implants placed in healed defects resulted in better stability as a consequence of higher BIC and BA. The Cg alone rendered increased BIC compared to other materials in both approaches. Immediate approach should be preferable to staged approach in terms of alveolar crest maintenance. The BIC and BA values did not vary between micro and macro-threads in this experimental model. Implants installed in sites filled with DBBM in immediate approach were less stable. © 2011 John Wiley & Sons A/S.

Nilpotent orbits and codimension-2 defects of 6d N = (2, 0)theories

We study the local properties of a class of codimension-2 defects of the 6d N = (2, 0) theories of type J = A, D, E labeled by nilpotent orbits of a Lie algebra $g, where g is determined by J and the outer-automorphism twist around the defect. This class is a natural generalization of the defects of the six-dimensional (6d) theory of type SU(N) labeled by a Young diagram with N boxes. For any of these defects, we determine its contribution to the dimension of the Higgs branch, to the Coulomb branch operators and their scaling dimensions, to the four-dimensional (4d) central charges a and c and to the flavor central charge k. © 2013 World Scientific Publishing Company.

Triangular arrangement of defects in a mesoscopic superconductor

By solving the time dependent Ginzburg-Landau equations, we investigated the influence of an internal triangular arrangement of point-like defects on the vortex configurations in a thin mesoscopic sample. The effect of the number of internal defects and their nature on the entrance position of the vortex is studied for a very thin circular sample. We found that the interplay between the vortex-vortex repulsion, the vortex-defect interaction and the interaction with the sample border leads to non-commensurate vortex configurations. © 2012 Elsevier B.V. All rights reserved.

Edible coatings from native and modified starches retain carotenoids in pumpkin during drying

The goal of this study was to evaluate the effect of edible coating pre-treatments on the retention of provitamin A during pumpkin drying. The coatings used were based on native and modified maize and cassava starch. To evaluate the effects of these coatings, slices of 'Dry Rajada' pumpkin were dried at 70 °C both with and without starch coatings applied at 30 and 80-90 °C. Carotenoid content was determined through HPLC using a C 30 column. Significant losses (12-15%) of trans-α-carotene and trans-β-carotene were observed when slices were dried without the coating. Significant improvement of carotenoid content was observed for dehydrated slices that were previously coated with a native maize starch solution at 90 °C, as well as with a modified maize starch solution at 30 °C and also with a modified cassava starch solution at 90 °C. The application of these starch solutions probably produced a more uniform film that adhered to the slices, minimizing carotenoid degradation during pumpkin drying and, as a consequence, resulting in a product that can be considered a good source of provitamin A. © 2012 Elsevier Ltd.

Healing of buccal dehiscence defects at implants installed immediately into extraction sockets - an experimental study in dogs

Aim: To evaluate the influence of implant positioning into extraction sockets on bone formation at buccal alveolar dehiscence defects. Material and Methods: In six Labrador dogs the pulp tissue of the mesial roots of 4P4 was removed and the root canals were filled. Flaps were elevated bilaterally, the premolars hemi-sectioned and the distal roots removed. The implants were placed in contact with either the buccal (test site) or with the lingual (control site) bony wall of the extraction sockets. Healing abutments were affixed and triangular buccal bony dehiscence defects, about 2.7 mm deep and 3.5 mm wide, were then prepared. No regenerative procedures were done and a non-submerged healing was allowed. After 4 months of healing, block sections of the implant sites were obtained for histological processing and peri-implant tissue assessment. Results: After 4 months of healing, the bony crest and the coronal border of osseointegration at the test sites were located 1.71 ± 1.20 and 2.50 ± 1.21 mm apically to the implant shoulder, respectively. At the control sites, the corresponding values were 0.68 ± 0.63 and 1.69 ± 0.99 mm, respectively. The differences between test and control reached statistical significance (P < 0.05). Residual marginal bone defects were found both at the test and control sites. A statistically significant difference between test and control sites was only found at the lingual aspects (depth 2.09 ± 1.01 and 1.01 ± 0.48 mm, respectively). Similar heights of the buccal biological width were observed at both sites (about 5.1 mm). Conclusions: The placement of implants in a lingual position of the extraction sockets allowed a higher degree of bone formation at buccal alveolar dehiscence defects compared with a buccal positioning. © 2012 John Wiley & Sons A/S.

Frugivorous flies (diptera: Tephritidae and lonchaeidae) and native parasitoids (hymenoptera) associated with pouteria caimito (sapotaceae) in Brazil

This study presents new reports on frugivorous flies and their parasitoids associated with the fruits of Pouteria caimito Radlk. (Sapotaceae), a plant native to the Amazon region. In addition to the new reports, this study also presents the infestation and parasitism rates, for dipterous and hymenopteran parasitoids, respectively.

Mite (Acari; Arachnida) diversity of two native plants in fragments of a semideciduous seasonal forest in Brazil

Studies to determine mite species richness in natural environments are still scarce, and have been conducted mainly in tropical ecosystems. The aim of this study was to determine the species richness of mites on two common native plants in fragments of the semideciduous seasonal forest in the Northwest of São Paulo State, Brazil. In each of eight fragments, 10 specimens of Actinostemon communis (Euphorbiaceae) and 10 of Trichilia casaretti (Meliaceae) were selected and marked. In total, 124 species of mites belonging to 21 families were found on the two plants. Tarsonemidae had the highest diversity (34 species), followed by Phytoseiidae (31), Tetranychidae (9) and Tenuipalpidae (8). Species accumulation curves for the two sampled plants did not reach an asymptote, even with the large sampling effort. Hence, it is estimated that a greater sampling effort may lead to an increase in species richness compared with what was found in this study. The richness of this mite fauna suggests that preservation of these plant species is important to maintain the mite diversity in these forest fragments. © 2013 Taylor & Francis Group, LLC.

Tissue engineering: Using collagen type i matrix for bone healing of bone defects

Among the many tissues in the human body, bone has been considered as a powerful marker for regeneration and its formation serves as a prototype model for tissue engineering based on morphogenesis. Therefore, collagen type I is one of the most useful biomaterials used in tissue engineering as extracellular matrix components capable to promote bone healing. The literature reveals excellent biocompatibility and safety due to its biological characteristics, such as biodegradability and weak antigenicity, making collagen type I the primary resource in medical applications. Thus, it was also used for tissue engineering including skin replacement, bone substitutes, and artificial blood vessels and valves. The authors describe the treatment of an abscessed apical periodontal cyst and show good outcomes of bone healing, using tissue engineering, as collagen type I matrix. © 2013 by Mutaz B. Habal, MD.

Seed germination of two Syagrus species native to Brazil

Palm species native to Brazil such as Syagrus picrophylla and S. schizophylla have great ornamental value and for this reason are much demanded for use in landscape. Its propagation is by seeds and often presents considerable problems to nursery managers because their seed has a hard and impermeable shell. Temperature is one of the factors that influence the seed germination process; however, the information for these species is scarce. Thus, this work aimed to study the effects of temperature regimes on the germination of S. picrophylla and S. schizophylla seeds and develop some recommendations in which temperature will obtain high rates of seed germination. The experimental design was entirely randomized with six temperatures and four replications of 25 seeds for each species. Germination and germination rate were evaluated. Higher and faster germination of S. picrophylla and S. schizophylla seeds were verified at constant temperature of 30°C and 35°C; and alternated temperature at 25-35°C.

Propagation of Camptosema grandiflorum native to Brazil by seeds and cuttings

Camptosema grandiflorum Benth., belonging to Fabaceae, is a voluble climber plant native to Brazil. Plants bloom in autumn-winter, producing long and hanging inflorescences with showy red flowers, which are much visited by hummingbirds. The leaves are also attractive, composed by three leaflets. It can be propagated by seeds or cuttings, but both seed germination and cutting rooting percentages are very low. Thus, the objective of this work was to study the effect of different temperatures on seed germination and of different indolebutyric acid (IBA) concentrations on the rooting of cuttings of C. grandiflorum. The experiment was set up at the São Paulo State University, located in Jaboticabal, São Paulo State, Brazil. The germination study was conducted in an entirely randomized design with six different temperatures (constant at 20, 25, 30 and 35°C; and alternated at 20-30 and 25-35°C, with a photoperiod of 12 hours) and four replications of 25 seeds each, placed in plastic boxes with vermiculite. The percentage of germination and the speed germination index (SGI) were evaluated. An entirely randomized block design was adopted for the cutting rooting evaluation, with four IBA concentrations (0; 1,000; 2,000; and 3,000 mg kg-1) and five replications of ten cuttings each, comprising 200 cuttings. After 30 days from the beginning of the rooting experiment, data referring to rooting percentage, number and length of roots and dry weight of roots were collected. For the seed germination experiment, fastest germination and highest germination percentage (87%) were obtained when seeds were maintained under the constant temperature of 30°C. For the cutting experiment, the concentrations of 2,000 and 3,000 mg kg-1 of IBA promoted the highest rooting percentages (98.5 and 94.1%, respectively) and number of roots. There were no statistical differences among the IBA concentrations for length of roots and dry weight of roots.