Estimations des potentiels de pêche des stocks démersaux ivoiriens par les modèles globaux. Effets de la prolifération du Baliste (Balistes capriscus)

Statistical data (1959-1977) of the trawling fishery off the continental shelf of Côte d'Ivoire has been fitted to the Fox (PRODFIT) global model. Owing to the proliferation of baliste (B. capriscus) since the years 1971-1972, data were divided into two groups. Maximum Sustainable Yield MSY: PMMC in the text), for the whole of commercial species in the continental shelf, decreased from 8800t to 5900t between the two periods; the difference represents balistes potentialities at bottom level. The model has also been fitted to data which concern Sciaenidae coastal community and Sparidae community which are parts by the 50 m isobathe. Deep layer (50-120m) MSY is at 2350t during the whole period of study. Until 1977, this potentiality was never reached, because of the low productivity of the Sparidae community.

Laser conditioning and multi-shot laser damage accumulation effects of HfO2/SiO2 antireflective coatings

Laser conditioning effects of the HfO2/SiO2 antireflective (AR) coatings at 1064 nm and the accumulation effects of multishot laser radiation were investigated. The HfO2/SiO2 AR coatings were prepared by E-beam evaporation (EBE). The singleshot and multi-shot laser induced damage threshold was detected following ISO standard 11254-1.2, and the laser conditioning was conducted by three-step raster scanning method. It was found that the single-shot LIDT and multi-shot LIDT was almost the same. The damage mostly > 80% occurred in the first shot under multi-shot laser radiation, and after that the damage occurring probability plummeted to < 5%. There was no obvious enhancement of the laser damage resistance for both the single-shot and multi-shot laser radiation of the AR coatings after laser conditioning. A Nomarski microscope was employed to map the damage morphology, and it found that the damage behavior is defect-initiated for both unconditioned and conditioned samples. © 2004 Elsevier B.V. All rights reserved.

Design and properties analysis of multi-layer dielectric used in pulse compressor gratings

Used in chirped-pulse amplification system and based on multi-layer thin film stack, pulse compressor gratings (PCG) are etched by ion-beam and holographic techniques. Diffraction efficiency and laser-induced damage threshold rely on the structural parameters of gratings. On the other hand, they depend greatly on the design of multi-layer. A theoretic design is given for dielectric multi-layer, which is exposed at 413.1 nm and used at 1053 nm. The influences of coating design on optical characters are described in detail. The analysis shows that a coating stack of H3L (H2L) (boolean AND) 9H0.5L2.01H meets the specifications of PCG well. And there is good agreement of transmission between experimental and the theoretic design. (c) 2005 Elsevier GmbH. All rights reserved.