Poly (vinyl alcohol) / silica nanocomposites: morphology and thermal degradation kinetics

The morphology of self-assembled poly(vinyl alcohol)/silica (PVA/SiO₂) nanocomposites is investigated with atomic force microscopy (AFM) and transmission electron microscopy (TEM). It is found that the SiO₂ nanoparticles are homogenously distributed throughout the PVA matrix in a form of spherical nano-cluster. The average size of the SiO₂ clusters is below 50 nm at the low contents (SiO₂ ≤ 5 wt%), while particle aggregations are clearly observed and their average size markedly increases to 110 nm when 10 wt% SiO₂ is loaded. The thermogravimetric analysis (TGA) shows that the nanocomposite significantly outperforms the pure PVA in the thermal resistance. By using a multi-heating-rate method, the thermal degradation kinetics of the nanocomposite with a SiO₂ content of 5 wt% is compared to the PVA host. The reaction activation energy (E) of the nanocomposite, similar to the pure PVA, is divided into two main stages corresponding to two degradation steps. However, at a given degradation temperature, the nanocomposite presents much lower reaction velocity constants (k), while its E is 20 kJ/mol higher than that of the PVA host.

Effects of aging bake hardenable steel in sheet metal forming

Bake hardening steels are being used as body panels in modern cars. These steels are stronger through an ageing process after baking in the paint ovens, which allows the thickness of the steel to be reduced without reducing the denting performance. The current study examined whether the steel ages at room temperature prior to forming which would deteriorate the formability. The work developed a new test and provided insight into acceptable levels of natural ageing which could be tolerated in the manufacturing process.

Thermodynamics and kinetics of the formation of Al2 O3/ MgAl2O4/MgO in Al-Silica metal matrix composite

The formation of Al₂O₃, MgAl₂O₄, and MgO has been widely studied in different Al base metal matrix composites, but the studies on thermodynamic aspects of the Al₂O₃/ MgAl₂O₄/MgO phase equilibria have been limited to few systems such as Al/Al₂O₃ and Al/SiC. The present study analyzes the Al₂O₃/MgAl₂O₄ and MgAl₂O₄/MgO equilibria with respect to the temperature and the Mg content in Al/SiO2 system using an extended Miedema model. There is a linear and parabolic variation in Mg with respect to the temperature for MgAl₂O₄/MgO and Al₂O₃/MgAl₂O₄ equilibria, respectively, and the influence of Si and Cu in the two equilibria is not appreciable. The experimental verification has been limited to MgAl₂O₄/MgO equilibria due to the high Mg content (≥0.5 wt pct) required for composite processing. The study has been carried out on two varieties of Al/SiO₂ composites, i.e., Al/Silica gel and Al/Micro silica processed by liquid metallurgy route (stir casting route). MgO is found to be more stable compared to MgAl₂O₄ at Mg levels ≥5 and 1 wt pct in Al/Silica gel and Al/Micro silica composites, respectively, at 1073 K. MgO is also found to be more stable at lower Mg content (3 wt pct) in Al/Silica gel composite with decreasing particle size of silica gel from 180 micron to submicron and nanolevels. The MgO to MgAl₂O₄ transformation has taken place through a series of transition phases influenced by the different thermodynamic and kinetic parameters such as holding temperature, Mg concentration in the alloy, holding time, and silica particle size.

Deformation behaviour of ultrafine grained steel produced by cold rolling of martensite

An ultrafine grained Nb microalloyed steel was produced by cold rolling of martensite followed by annealing heat treatments at different times to study its effect on the microstructure and mechanical behaviour of the ultrafine grained steel. High strength was achieved by this thermomechanical processing due to the formation of cell and subgrain dislocation substructure; however annealing reduced both strength and elongation.

63Cu NMR investigation of effect of small additions of Sn to Al-1.7 at.%Cu in promoting accelerated phase transformations on aging

Very recently 63Cu NMR has been shown to be extremely sensitive in detecting and differentiating between the precipitate phases that form in Al-Cu alloys during heat treatment. This technique is now used to quantify the effectiveness of small additions of Sn to the alloy Al-1.7 at.% Cu in promoting the rapid nucleation and growth of the θ'-phase precipitate. Two parallel series of 63Cu NMR spectra were recorded for Al-1.7 at.% Cu and Al-1.7 at.% Cu-0.01 at.% Sn: (i) aged at 130° C to observe the comparative rate of phase evolution and (ii) aged at 200° C to observe the rate of growth of θ'-phase and to compare with the Vickers hardness of the alloys aged at 200° C for similar periods. Evidence is presented that a metastable precursor phase to θ' (labelled TPHM2757math001) is formed in Al-Cu-Sn which transforms to θ' on further aging.

Exercise performance and V0₂ kinetics during upright and recumbent high-intensity cycling exercise

This study investigated cycling performance and oxygen uptake (VO₂) kinetics between upright and two commonly used recumbent (R) postures, 65ºR and 30ºR. On three occasions, ten young active males performed three bouts of high-intensity constant-load (85% peak workload achieved during a graded test) cycling in one of the three randomly assigned postures (upright, 65ºR or 30ºR). The first bout was performed to fatigue and second and third bouts were limited to 7 min. A subset of seven subjects performed a final constant-load test to failure in the supine posture. Exercise time to failure was not altered when the body inclination was lowered from the upright (13.1 ± 4.5 min) to 65ºR (10.5 ± 2.7 min) and 30ºR (11.5 ± 4.6 min) postures; but it was significantly shorter in the supine posture (5.8 ± 2.1 min) when compared with the three inclined postures. Resulting kinetic parameters from a tri-exponential analysis of breath-by-breath VO₂ data during the first 7 min of exercise were also not different between the three inclined postures. However, inert gas rebreathing analysis of cardiac output revealed a greater cardiac output and stroke volume in both recumbent postures compared with the upright posture at 30 s into the exercise. These data suggest that increased cardiac function may counteract the reduction of hydrostatic pressure from upright ~25 mmHg; to 65ºR ~22 mmHg; and 30ºR ~18 mmHg such that perfusion of active muscle presumably remains largely unchanged, and also therefore, VO₂ kinetics and performance during high-intensity cycling.

Studies on the properties and the thermal decomposition kinetics of natural rubber prepared with calcium chloride

To evaluate calcium chloride coagulation technology, two kinds of raw natural rubber samples were produced by calcium chloride and acetic acid respectively. Plasticity retention index (PRI), thermal degradation process, thermal degradation kinetics and differential thermal analysis of two samples studied. Furthermore, thermal degradation activation energy, pre-exponential factor and rate constant were calculated. The results show that natural rubber produced by calcium chloride possesses good mechanical property and poor thermo-stability in comparison to natural rubber produced by acetic acid.

Oxygen (O2) kinetics during early recovery from peak exercise in patients with type 2 diabetes

Aims To examine the oxygen (O₂) kinetics during early recovery from peak exercise in patients with Type 2 diabetes and to examine whether oxygen O₂ recovery is associated with fasting glucose and HbA_1c in this population.

Methods Eighty-nine participants (52 men) aged 51.8 ± 7.1 years (mean ± sd) were divided into three groups: normal weight (BMI ≤ 25.0 kg/m²), overweight/obese without diabetes (BMI ≥ 26 kg/m²) and overweight/obese with Type 2 diabetes. Participants were assessed for their aerobic power (VO_2peak) on a cycle ergometer, provided a fasting blood sample and underwent a series of anthropometric measurements. Early recovery period was measured for 60 s from cessation of exercise and expressed as percentage of VO_2peak (higher percentage represents slower recovery).

Results No significant differences were observed for age between the three study groups. Both the overweight/obese groups without diabetes and with Type 2 diabetes had higher BMI than the normal weight group, with no significant differences between overweight/obese participants without diabetes and those with diabetes. Participants with Type 2 diabetes had lower VO_2peak than overweight/obese participants without diabetes and normal weight individuals (19.6 ± 4.8, 22.6 ± 5.4 and 25.7 ± 5.3 ml kg⁻¹ min⁻¹, respectively, P < 0.004 for overall trends). Participants with Type 2 diabetes also had slower recovery in oxygen O₂ kinetics after exercise, compared with both normal weight and overweight/obese individuals without diabetes (56.5 ± 7.7, 49.2 ± 7.2, 47.7 ± 7.4%, P < 0.004 for overall trends). Multiple regression analysis revealed that percentage of oxygen O₂ recovery was a stronger predictor than VO_2peak, BMI or age for fasting glucose and HbA_1c.

Conclusions Patients with Type 2 diabetes have lower VO_2peak and prolonged oxygen O₂ recovery from peak exercise. However, only prolonged oxygen O₂ recovery was associated with fasting glucose and HbA_1c.