Screening of resistance to egyptian broomrape infection in tomato varieties

Parasitic weed species of the genus Orobanche are serious threat for the production of several crops in Europe, Africa and Asia. Research on resistant host plant varieties is one of the most effective management strategies for this parasitic weed. In this study, the susceptibility of twenty-nine tomato varieties to broomrape infection (Orobanche aegyptiaca) under greenhouse conditions was investigated. The employed experimental design was completely randomized with three replications. Differences in susceptibility to infection were monitored among tomato varieties based on their difference in the number of emerged shoots of broomrape and broomrape dry weight (shoots and tubercles). Date of Orobanche emergence varied over a period of 3 to 30 days between varieties. Very late infection was monitored for varieties of Cal-jN3, Viva, Caligen 86, Packmor, CSX 5013, Hyb. PS 6515 and Hyb Petopride5. Differences in the growth and fruit yield among tomato varieties were also found in response to broomrape infestation. Moderate levels of resistance were obtained in Viva, Caligen 86, Hyb. PS 6515, Hyb.Firenze (PS 8094) and Cal-jN3 among other tomato varieties. In contrast, varieties of Kimia-Falat, Hyb. Petopride II and Hyb.AP865 were the most susceptible hosts to Orobanche aegyptiaca.

Resistance of Raphanus raphanistrum to the herbicide metsulfuron-methyl

The ALS-inhibiting herbicides, especially metsulfuron-methyl, are widely used for weed control, mainly wheat and barley in southern Brazil. Raphanus raphanistrum is a major weed of winter crops. However, in recent years, R.raphanistrum, after being treated with metsulfuron, has shown no symptoms of toxicity, possibly due to herbicide resistance. Aiming to evaluate the existence of R.raphanistrum biotypes resistant to metsulfuron, an experiment was conducted in a greenhouse, in a completely randomized design with four replications. The plots consisted of pots with six plants. The treatments consisted of the interaction of resistant R. raphanistrum (biotype R) and susceptible R. raphanistrum (biotypes S) with ten doses of the herbicide (0.0; 0.6; 1.2; 2.4; 4.8; 9.6; 19.2; 38.4; 76.8 and 153.6 g i.a. ha-1). The application of the test herbicides occurred when the crop was at the stage of 3 to 4 true leaves. The variables analyzed were control and dry matter accumulation. Statistical analysis of dose-response curves was performed by non linear regression. Biotype S was susceptible to the herbicide even at doses below the recommended. Biotype R was insensitive to the herbicide obtaining values of resistance factor (F) higher than 85. The dose-response curve confirmed the existence of R. raphanistrum biotypes with high level of resistance to metsulfuron-methyl.

Does the resistance to glyphosate herbicide affect the competitive ability of ryegrass with soybean?

The objective this work was to investigate the competitive ability between resistant and susceptible ryegrass biotypes and of these with soybean crop. Four experiments were carried under greenhouse, in a completely randomized design with four replications, in 2011 and 2012. Treatments were arranged in additive series and replacement series assay. In each series, the proportions among ryegrass resistant and susceptible plants related to soybean were: 100:0, 75:25, 50:50, 25:75 e 0:100. Leaf area and shoot dry mass were evaluated. Competitiveness statistical analysis consisted in applying diagrams to the replacement series and alternative interpretations of the competitiveness indexes. The soybean crop had equivalent competitiveness to the susceptible ryegrass biotype and inferior to the resistant biotype, while the biotypes, both susceptible and resistant to glyphosate, present equivalent competitive ability. In general, the intraspecific competition is more harmful to ryegrass when in competition with soybean, while interspecific competition is predominant for culture.

Multiple resistance of Conyza sumatrensis to Chlorimuron­ethyl and to Glyphosate

Weed resistance to herbicides has been a major issue in Brazil, mainly due to the inefficiency of the herbicides used in no-till areas and to the high cost of these herbicide treatments. Failures in controlling the weed Conyza have been reported in Western and Northern grain crop areas in Paraná (Brazil). This work aimed to evaluate the potential occurrence of C. sumatrensis biotypes resistant to the herbicides chlorimuron-ethyl and glyphosate. Experiments were carried out under greenhouse conditions with four biotypes (Cascavel-2, Toledo-4, Tupãssi-6, and Assis Chateaubriand-7) possibly resistant to, as well as a population considered susceptible to chlorimuron-ethyl and glyphosate. To obtain dose-response curves, eight herbicide doses of chlorimuron-ethyl (0, 2.5, 5, 10, 20, 40, 80 and 160 g ha-1) and glyphosate (0, 90, 180, 360, 720, 1,440, 2,880 and 5,760 g e.a. ha-1) were applied and weed control and shoot biomass evaluations were made. Results provided evidence that two biotypes (Cascavel-2 and Tupãssi-6) were resistant to glyphosate and four biotypes (Cascavel-2, Toledo-4, Tupãssi-6 and Assis Chateaubriand-7) were resistant to chlorimuron­ethyl. Multiple resistance to glyphosate and chlorimuron was confirmed for biotypes Cascavel­2 and Tupãssi 6. This is the first report on multiple resistance in Conyza sumatrensis, worldwide.

Resistance of Amaranthus retroflexus to acetolactate synthase inhibitor herbicides in Brazil

When in competition with cotton, Amaranthus retroflexus can cause high yield losses. Due to the limited availability of selective herbicides registered for post emergence control of this weed, the same herbicides have been used repeated times over the last few years, which may have selected resistant biotypes. Biotypes of A. retroflexus collected from the main areas of cotton cultivation in Brazil were submitted to dose-response trials, by applying the herbicides trifloxysulfuron-sodium and pyrithiobac-sodium in doses equivalent to 0, ¼, ½, 1, 2 and 4 times the recommended rates. Resistance to ALS inhibitors was confirmed in biotypes of A. retroflexus. Biotype MS 2 from Mato Grosso do Sul, was cross-resistant to both trifloxysulfuron-sodium and pyrithiobac-sodium, while biotype MS 1 was resistant to trifloxysulfuron-sodium only. Likewise, singular and cross resistance was also confirmed in biotypes from Goiás (GO 3, GO 4 and GO 6), in relation to trifloxysulfuron­sodium and pyrithiobac-sodium. One biotype from Mato Grosso (MT 13) was not resistant to any of the ALS inhibitors evaluated in this work.

Reducing contact resistance in graphene devices

In this thesis, the contact resistance of graphene devices was investigated because high contact resistance is detrimental to the performance of graphene field-effect transistors (GFET). Method for increasing so-called edge-contact area was applied in device fabrication process, as few nanometers thick Ni layer was used as a catalytic etchant during the annealing process. Finally, Ni was also used as a metal for contact. GFETs were fabricated using electron beam lithography using graphene fabricated by chemical vapor deposition (CVD). Critical part of the fabrication process was to preserve the high quality of the graphene channel while etching the graphene at contact areas with Ni during the annealing. This was achieved by optimizing the combination of temperature and gas flows. The structural properties of graphene were studied using scanning electron microscopy, scanning confocal μ-Raman spectroscopy and optical microscopy. Evaluation of electric transport properties including contact resistance was carried out by transmission line method and four-probe method. The lowest contact resistance found was about at 350 Ωμm. In addition, different methods to transfer CVD graphene synthesized on copper were studied. Typical method using PMMA as a supporting layer leaves some residues after its removal, thus effecting on the performance of a graphene devices. In a metal assisted transfer method, metal is used as an interfacial layer between PMMA and graphene. This allows more effective removal of PMMA. However, Raman spectra of graphene transferred by metal assisted method showed somewhat lower quality than the PMMA assisted method

First report of Amaranthus viridis resistance to herbicides

Due to the limited number of herbicides registered for the control of dicot weeds in cotton crops, ALS inhibitors have been used on an intensive and recurrent basis. Given that, cases of poor weed control have been described after application of these herbicides in the main cotton producing areas in Brazil, the purpose of the present work was to evaluate the occurrence of resistance to ALS herbicides in Amaranthus viridis biotypes from those areas. Dose-response curves were prepared after pre-emergence applications of trifloxysulfuron-sodium (0; 1.8; 3.7; 7.5; 15 and 30 g ha-1) and pyrithiobac-sodium (0; 35; 70; 140; 280 and 560 g ha-1), equivalent to 0, ¼, ½, 1, 2 and 4 times the recommended commercial rates. The selection of trifloxysulfuron-sodium resistant biotypes of A. viridis was confirmed in samples from Bahia (BA 7, BA 8, BA 9 and BA 11). However, no resistance to pyrithiobac-sodium was found for biotypes either from Bahia or from Mato Grosso do Sul.