Reconstructing the origins of high-alpine niches and cushion life form in the genus Androsace S.L. (Primulaceae).

Relatively, few species have been able to colonize extremely cold alpine environments. We investigate the role played by the cushion life form in the evolution of climatic niches in the plant genus Androsace s.l., which spreads across the mountain ranges of the Northern Hemisphere. Using robust methods that account for phylogenetic uncertainty, intraspecific variability of climatic requirements and different life-history evolution scenarios, we show that climatic niches of Androsace s.l. exhibit low phylogenetic signal and that they evolved relatively recently and punctually. Models of niche evolution fitted onto phylogenies show that the cushion life form has been a key innovation providing the opportunity to occupy extremely cold environments, thus contributing to rapid climatic niche diversification in the genus Androsace s.l. We then propose a plausible scenario for the adaptation of plants to alpine habitats.

Imaging molasse and quaternary sediments in Lake Geneva, Switzerland, with 3-D high-resolution seismic reflection methods: A case study

A high-resolution three-dimensional (3-D) seismic reflection survey was conducted in Lake Geneva, near the city of Lausanne, Switzerland, as part of a project for developing such seismic techniques. Using a single 48-channel streamer, the 3-D site with an area of 1200 m x 600 m was surveyed in 10 days. A variety of complex geologic structures (e.g. thrusts, folds, channel-fill) up to similar to150 m below the water bottom were obtained with a 15 in.(3) water gun. The 3-D data allowed the construction of an accurate velocity model and the distinction of five major seismic facies within the Lower Freshwater Molasse (Aquitanian) and the Quaternary sedimentary units. Additionally, the Plateau Molasse (PM) and Subalpine Molasse (SM) erosional surface, "La Paudeze" thrust fault (PM-SM boundary) and the thickness of Quaternary sediments were accurately delineated in 3-D.

Use of combined suspension laryngoscopy, flexible bronchoscopy and high frequency jet ventilation for Y-shaped airway stents delivery

La trachée et les bronches proximales sont de fins conduits subtils, ingénieusement structurés par une partie cartilagineuse antérieure résistante aux variations de pression et une partie membraneuse postérieure souple. Par leurs faibles volumes (espace mort) ils délivrent un grand pourcentage de l'air inspiré aux voies distales, puis au parenchyme pulmonaire, permettant les échanges de gaz. Cette belle harmonie respiratoire peut être rapidement mise à mal dès qu'un processus atteint ces voies respiratoires proximales, soit en les comprimant, processus sténosant, soit en affaiblissant leur structure, trachéo-bronchomalacie, soit en ouvrant leur paroi sur les structures médiastinales, fistule trachéo/broncho-médiastinales, pleurales ou autres. Le pronostic vital est alors rapidement engagé au vu de l'absolue nécessité du bon fonctionnement de ces fins conduits, une petite diminution du calibre de leurs fines lumières provoquant une baisse importante de leurs surfaces. Dans ces situations à haut potentiel de complication majeure les interventions endoscopiques pour restaurer l'intégrité de ces conduits sont alors fort risquées, et il est primordial de pouvoir les effectuer dans un cadre sécurisé au maximum. La réalisation de ces gestes par la technique décrite dans notre article « Use of combined suspension laryngoscopy, flexible bronchoscopy and high frequency jet ventilation forY-shaped airway stents delivery" permet la sécurité nécessaire à ces situations instable, en effet -la laryngoscopie en suspension expose les voies proximales en offrant un accès le plus large possible à l'arbre trachéobronchique ce qui permet l insertion de multiples instruments parfois volumineux, -la Jet ventilation assure une oxygénation et une ventilation adéquate par un fin cathéter placé soit dans le poumon sain, soit en distalité de la lésion -la bronchoscopie souple, passant au travers d'endroits exigus et courbes permet le déploiement sous vision direct, au millimètre près, de divers dispositifs. Cette association remplace avantageusement la technique traditionnelle qui insère les stents à l'aveugle, et en apnée, ce qui représente de haut risque de mauvais positionnement des stents avec des conséquences immédiates sur l'oxygénation et la ventilation souvent déjà bien altérées. Perspective et conclusion : cette technique est utile pour l'insertion des stents en Y, centraux, comme décrit dans notre article, et les indications peuvent être étendues aux stents distaux pour lesquels l'accès n'est parfois pas aisé avec le bronchoscope rigide, et pour d'autres interventions endoscopiques, laser, cryothérapie, radiofréquence ou l'insertion de nouveaux dispositifs.

Expression of the gene encoding the high-Km glucose transporter 2 by the early postimplantation mouse embryo is essential for neural tube defects associated with diabetic embryopathy.

AIMS/HYPOTHESIS: Excess glucose transport to embryos during diabetic pregnancy causes congenital malformations. The early postimplantation embryo expresses the gene encoding the high-Km GLUT2 (also known as SLC2A2) glucose transporter. The hypothesis tested here is that high-Km glucose transport by GLUT2 causes malformations resulting from maternal hyperglycaemia during diabetic pregnancy. MATERIALS AND METHODS: Glut2 mRNA was assayed by RT-PCR. The Km of embryo glucose transport was determined by measuring 0.5-20 mmol/l 2-deoxy[3H]glucose transport. To test whether the GLUT2 transporter is required for neural tube defects resulting from maternal hyperglycaemia, Glut2+/- mice were crossed and transient hyperglycaemia was induced by glucose injection on day 7.5 of pregnancy. Embryos were recovered on day 10.5, and the incidence of neural tube defects in wild-type, Glut2+/- and Glut2-/- embryos was scored. RESULTS: Early postimplantation embryos expressed Glut2, and expression was unaffected by maternal diabetes. Moreover, glucose transport by these embryos showed Michaelis-Menten kinetics of 16.19 mmol/l, consistent with transport mediated by GLUT2. In pregnancies made hyperglycaemic on day 7.5, neural tube defects were significantly increased in wild-type embryos, but Glut2+/- embryos were partially protected from neural tube defects, and Glut2-/- embryos were completely protected from these defects. The frequency of occurrence of wild-type, Glut2+/- and Glut2-/- embryos suggests that the presence of Glut2 alleles confers a survival advantage in embryos before day 10.5. CONCLUSIONS/INTERPRETATIONS: High-Km glucose transport by the GLUT2 glucose transporter during organogenesis is responsible for the embryopathic effects of maternal diabetes.

Acidic ribosomal proteins and histone H3 from Leishmania present a high rate of divergence

Another additional peculiarity in Leishmania will be discussed about of the amino acid divergence rate of three structural proteins: acidic ribosomal P1 and P2b proteins, and histone H3 by using multiple sequence alignment and dendrograms. These structural proteins present a high rate of divergence regarding to their homologous protein in Trypanosoma cruzi. At this regard, L. (V.) peruviana P1 and T. cruzi P1 showed 57.4% of divergence rate. Likewise, L. (V.) braziliensis histone H3 and acidic ribosomal P2 protein exhibited 31.8% and 41.7% respectively of rate of divergence in comparison with their homologous in T. cruzi.

Alcohol drinking and cardiovascular risk in a population with high mean alcohol consumption.

Moderate alcohol consumption has been associated with lower coronary artery disease (CAD) risk. However, data on the CAD risk associated with high alcohol consumption are conflicting. The aim of this study was to examine the impact of heavier drinking on 10-year CAD risk in a population with high mean alcohol consumption. In a population-based study of 5,769 adults (aged 35 to 75 years) without cardiovascular disease in Switzerland, 1-week alcohol consumption was categorized as 0, 1 to 6, 7 to 13, 14 to 20, 21 to 27, 28 to 34, and > or =35 drinks/week or as nondrinkers (0 drinks/week), moderate (1 to 13 drinks/week), high (14 to 34 drinks/week), and very high (> or =35 drinks/week). Blood pressure and lipids were measured, and 10-year CAD risk was calculated according to the Framingham risk score. Seventy-three percent (n = 4,214) of the participants consumed alcohol; 16% (n = 909) were high drinkers and 2% (n = 119) very high drinkers. In multivariate analysis, increasing alcohol consumption was associated with higher high-density lipoprotein cholesterol (from a mean +/- SE of 1.57 +/- 0.01 mmol/L in nondrinkers to 1.88 +/- 0.03 mmol/L in very high drinkers); triglycerides (1.17 +/- 1.01 to 1.32 +/- 1.05 mmol/L), and systolic and diastolic blood pressure (127.4 +/- 0.4 to 132.2 +/- 1.4 mm Hg and 78.7 +/- 0.3 to 81.7 +/- 0.9 mm Hg, respectively) (all p values for trend <0.001). Ten-year CAD risk increased from 4.31 +/- 0.10% to 4.90 +/- 0.37% (p = 0.03) with alcohol use, with a J-shaped relation. Increasing wine consumption was more related to high-density lipoprotein cholesterol levels, whereas beer and spirits were related to increased triglyceride levels. In conclusion, as measured by 10-year CAD risk, the protective effect of alcohol consumption disappears in very high drinkers, because the beneficial increase in high-density lipoprotein cholesterol is offset by the increases in blood pressure levels.

High Growth Firms and Innovation: an empirical analysis for Spanish firms

This paper analyzes the effect of firms’ innovation activities on their growth performance. In particular, we observe how important innovation is for high-growth firms (HGFs) for an extensive sample of Spanish manufacturing and services firms. The panel data used comprises diverse waves of Spanish CIS over the the period 2004-2008. First, a probit analysis determines whether innovation affects the probability of being a high-growth firm. And second, a quantile regression technique is applied to explore the determinants and characteristics of specific groups of firms (manufacturing versus service firms and high-tech versus low-tech firms). It is revealed that R&D plays a significant role in the probability of becoming a HGF. Investment in internal and external R&D per employee has a positive impact on firm growth (although internal R&D presents a significant impact in the last quantiles, external R&D is significant up to the median). Furthermore, we show evidence that there is a positive impact of employment (sales) growth on the sales (employment) growth. Keywords: high-growth firms, firm growth, innovation activity JEL Classifications: L11, L25, O30

Determinants of high-growth firms:why do some countries have more high-growth firms than others?

High-growth firms have been shown to be a key factor for economic growth and structural change. This paper analyses the determinants of the number of high-growth firms in a country for 17 OECD countries between 1999 and 2005, using the Amadeus data set, the GEM data set, and others. The first contribution of this paper is that it is – as far as we know – the first empirical analysis of high-growth firms at the country level on the basis of actual measured growth. Second, we find indicative empirical evidence for three driving forces of high growth, viz. entrepreneurship, institutional settings, and opportunities for growth, all in accordance with theory and empirical findings in related fields of research. Third, the paper gives a tentative explanation of the differences in the average percentage of high-growth firms between countries. Finally, the paper gives some clues for policy makers how to promote high-growth firms. Keywords: high-growth firms, fast growing firms, entrepreneurship, institutional obstacles, opportunities for growth