Os ativos na contabilidade pública: conceito e critérios de reconhecimento

Com a reforma da Contabilidade Pública em Portugal, e consequentemente a implementação de planos de contabilidade pública sectoriais, a contabilidade patrimonial ganhou importância neste sistema contabilístico, sendo necessário definir a composição e o valor do património de cada entidade pública. A classificação dos elementos patrimoniais como activos tornou-se uma das preocupações destas entidades, sendo necessário definir critérios precisos para o seu reconhecimento. Estes critérios juntamente com um conjunto de conceitos dos elementos das demonstrações financeiras fazem parte da estrutura conceptual tão necessária para a Contabilidade Pública em Portugal. Partindo do conceito de activo das empresas e dos seus critérios de reconhecimento, e atendendo às particularidades das entidades públicas poderemos definir um conceito de activo público bem como critérios para o seu reconhecimento, aos quais um elemento deverá necessariamente obedecer para que possa constar no balanço de uma determinada entidade pública, compondo dessa forma o seu património.

Energy harvesting performance of piezoelectric electrospun polymer fibers and polymer/ceramic composites

The energy harvesting efficiency of electrospun poly(vinylidene fluoride), its copolymer vinylidene fluoride-trifluoroethylene and composites of the later with piezoelectric BaTiOon interdigitated electrodes has been investigated. Further, a study of the influence of the electrospinning processing parameters on the size and distribution of the composites fibers has been performed. It is found that the best energy harvesting performance is obtained for the pure poly(vinylidene fluoride) fibers, with power outputs up to 0.03 W and 25 W under low and high mechanical deformation. The copolymer and the composites show reduced power output due to increased mechanical stiffness. The obtained values, among the largest found in the literature, the easy processing and the low cost and robustness of the polymer, demonstrate the applicability of the developed system.

Thermal degradation of Pb(Zr0.53Ti0.47)O3/poly(vinylidene fluoride) composites as a function of ceramic grain size and concentration

Poly(vinylidene fluoride)/Pb(Zr0.53Ti0.47)O3,([PVDF]1−x/[PZT]x) composites of volume fractions x and (0–3) type connectivity were prepared in the form of thin films. PZT powders with average grain sizes of 0.2, 0.84, and 2.35 μm in different volume fraction of PZT up to 40 % were mixed with the polymeric matrix. The influence of the inorganic particle size and its content on the thermal degradation properties of the composites was then investigated by means of thermo-gravimetric analysis. It is observed that filler size affects more than filler concentration the degradation temperature and activation energy of the polymer. In the same way and due to their larger specific area, smaller particles leave larger solid residuals after the polymer degradation. The polymer degradation mechanism is not significantly modified by the presence of the inorganic fillers. On the other hand, an inhibition effect occurs due to the presence of the fillers, affecting particularly the activation energy of the process.

Piezoresistive sensors for force mapping of hip-prostheses

The success of artificial prosthetic replacements depends on the fixation of the artificial prosthetic component after being implanted in the thighbone. The materials for fixation are subject to mechanical stresses, which originate permanent deformations, incipient cracks and even fatigue fractures. This work shows the possibility of monitoring the mechanical stress over time in prosthesis. In this way, highly sensitive silicon thin-film piezoresistive sensors were developed attached to prosthesis and their results compared with commercial strain gauge sensors. Mechanical stress-strain experiments were performed in compressive mode, during 10,000 cycles. Experimental data was acquired at mechanical vibration frequencies of 0.5 Hz, 1 Hz and 5 Hz, and sent to a computer by means of a wireless link. The results show that there is a decrease in sensitivity of the thin-film silicon piezoresistive sensors when they are attached to the prosthesis, but this decrease does not compromise its monitoring performance. The sensitivity, compared to that of commercial strain gauges, is much larger due to their higher gauge factors (-23.5), when compared to the GFs of commercial sensors (2).

A Wireless EEG Acquisition Platform based on Embedded Systems

This paper proposes a wireless EEG acquisition platform based on Open Multimedia Architecture Platform (OMAP) embedded system. A high-impedance active dry electrode was tested for improving the scalp- electrode interface. It was used the sigma-delta ADS1298 analog-to-digital converter, and developed a “kernelspace” character driver to manage the communications between the converter unit and the OMAP’s ARM core. The acquired EEG signal data is processed by a “userspace” application, which accesses the driver’s memory, saves the data to a SD-card and transmits them through a wireless TCP/IP-socket to a PC. The electrodes were tested through the alpha wave replacement phenomenon. The experimental results presented the expected alpha rhythm (8-13 Hz) reactiveness to the eyes opening task. The driver spends about 725 μs to acquire and store the data samples. The application takes about 244 μs to get the data from the driver and 1.4 ms to save it in the SD-card. A WiFi throughput of 12.8Mbps was measured which results in a transmission time of 5 ms for 512 kb of data. The embedded system consumes about 200 mAh when wireless off and 400 mAh when it is on. The system exhibits a reliable performance to record EEG signals and transmit them wirelessly. Besides the microcontroller-based architectures, the proposed platform demonstrates that powerful ARM processors running embedded operating systems can be programmed with real-time constrains at the kernel level in order to control hardware, while maintaining their parallel processing abilities in high level software applications.

Eigenvalue computations in the context of data-sparse approximations of integral operators

In this work, we consider the numerical solution of a large eigenvalue problem resulting from a finite rank discretization of an integral operator. We are interested in computing a few eigenpairs, with an iterative method, so a matrix representation that allows for fast matrix-vector products is required. Hierarchical matrices are appropriate for this setting, and also provide cheap LU decompositions required in the spectral transformation technique. We illustrate the use of freely available software tools to address the problem, in particular SLEPc for the eigensolvers and HLib for the construction of H-matrices. The numerical tests are performed using an astrophysics application. Results show the benefits of the data-sparse representation compared to standard storage schemes, in terms of computational cost as well as memory requirements.

Modifying fish gelatin electrospun membranes for biomedical applications: cross- linking and swelling behavior

Development of suitable membranes is a fundamental requisite for tissue and biomedical engineering applications. This work presents fish gelatin random and aligned electrospun membranes cross-linked with glutaraldehyde (GA). It was observed that the fiber average diameter and the morphology is not influenced by the GA exposure time and presents fibers with an average diameter around 250 nm. Moreover, when the gelatin mats are immersed in a phosphate buffered saline solution (PBS), they can retain as much as 12 times its initial weight of solution almost instantaneously, but the material microstructure of the fiber mats changes from the characteristic fibrous to an almost spherical porous structure. Cross-linked gelatin electrospun fiber mats and films showed a water vapor permeability of 1.37 ± 0.02 and 0.13 ± 0.10 (g.mm)/(m2.h.kPa), respectively. Finally, the processing technique and cross-linking process does not inhibit MC-3T3-E1 cell adhesion. Preliminary cell culture results showed good cell adhesion and proliferation in the cross-linked random and aligned gelatin fiber mats.

Um projecto de Ensino Artístico no Museu Portuense

Em 1833 foi instituído, no Porto, o Museu de Pinturas e Estampas e a João Baptista Ribeiro, figura proeminente na época (Viana, 1991), atribuída a função de organizar o respectivo Museu. Na execução das suas tarefas, Baptista Ribeiro projecta uma Casa d’ estudo no Museu, no intuito de proporcionar uma aprendizagem no campo das belas artes. Em Portugal, procurava-se, nesse período, organizar o sistema de ensino artístico, o que efectivamente acontece com a fundação das Academias de Belas Artes, em 1836. Nesse sentido, a proposta de Baptista Ribeiro parece enquadrar uma situação emergente e fundamental, nesse campo. O presente artigo tem como objectivo analisar os métodos de ensino propostos por Baptista Ribeiro, e confrontá-los com outras metodologias que na época se procuraram estabelecer para uma formação artística. Deste modo, pretendemos analisar as principais semelhanças e diferenças em pedagogias propostas e a influência do espaço museológico no projecto de Baptista Ribeiro; perscrutando intenções e abordagens na definição de estratégias para um ensino artístico.

Os fundos éticos nos mercados nas Bolsas de Valores

É possível encontrar nos mercados de valores mobiliários e/ou outros instrumentos financeiros e/ou nas chamadas bolsas de valores - éticas concretas, reais e definidas? Pensamos que sim. Os fundos éticos são apenas uma das espécies de fundos. Abstract: You can find in the securities markets and / or other financial instruments and / or in so-called exchanges - concrete ethical, real and defined? We think so. Ethical funds are only one species of funds.