高灵敏分光光度法测定食品中痕量硒——硫氰酸盐-罗丹明B-Tween20体系

本文研究了Se(Ⅳ)-SCN-RhB-吐温20高灵敏显色反应体系。Se(Ⅳ)与SCN~-和RhB~+形成三元离子缔合物,并吸附了染料琉氰酸盐,表观摩尔吸光系数2.0×10~6L·mol~(-1).cm~(-1),是碱性染料类分光光度法中最灵敏的。Se含量在0～2μg/25ml范围内遵从比尔定律。利用巯基棉分离干扰离子,选择性高。测定了食品中总硒,结果满意。

PTHF-b-PMMA/PVC共混体系的相容性和结晶行为

研究了具有焓效应的聚四氢呋喃-聚甲基丙烯酸甲酯两嵌段共聚物与聚氯乙烯PTHF-b-PMMA/PVC)共混体系的相容性和结晶行为.结果表明,其相容性比AB/A 型嵌段共聚物共混体系的相容性要好得多;与PTHF 部分相容的PVC 对PTHF 微区的结晶行为可产生很大的影响.应用有关理论和模型很好地解释了结晶行为的这种变化.

ELECTROCATALYTIC OXIDATION AND FLOW DETECTION OF HYDRAZINE COMPOUNDS IN LIQUID-CHROMATOGRAPHY AT A VITAMIN-B-12 ADSORBED GLASSY-CARBON ELECTRODE

A vitamin B-12 chemically modified electrode (CME) was constructed by adsorption of vitamin B-12 onto a glassy carbon surface. The electrode catalyzes the electrooxidation of hydrazine compounds over a wide pH range. The electrocatalytic behavior of hydrazines is elucidated with respect to the CME preparation conditions, solution pH, operating potential, mobile phase flow rate, and other variables. When applied to liquid chromatographic detection of the analytes, the vitamin B-12 CME yielded a linear response range over 2 orders of magnitude, and detection limits at the picomole level. The vitamin B-12 CME offers acceptable catalytic stability in both batch and flow systems.

RELATIONSHIP BETWEEN CRYSTALLIZATION OF THE PDMS BLOCK AND MORPHOLOGY OF POLY(BUTADIENE-B-DIMETHYLSILOXANE)

Studies using transmission electron microscopy, differential scanning calorimetry, and X-ray diffraction showed correlations between the crystallization behavior of the polydimethylsiloxane (PDMS) block and the morphology of the block copolymer poly (butadiene-b-dimethylsiloxane) (PB-PDMS). When the PDMS component existed as spheres dispersed in a PB matrix, the crystallization rate of the PDMS block was lower than when the PDMS phase existed in rod or cylinder form.

超高灵敏显色反应及其应用的研究Ⅷ.铅-乙基罗丹明B-碘化物体系

本文研究了在聚乙稀醇-阿拉伯胶共存下,乙基罗丹明B和PbI_4~(2-)的超高灵敏显色反应并制定了新的光度法。缔合物最大吸收为605nm,ε值为1.0×10~6·L·mol~(-1)·cm~(-1)。经巯基棉分离、富集,本法成功地用于硫酸镁、硫酸锌和硫酸亚铁铵等试剂中痕量铅的测定。

本体聚合稀土异戊橡胶的加工性能

对2L釜合成的5个本体聚合稀土异戊橡胶(LnIR)胶样([η]=2.38～8.10 dL/g)的辊筒行为、挤出行为,硫化特性和硫化胶性能进行了研究。结果表明,LnIR具有明显的素炼降解行为,混炼辊筒温度不宜低于70℃,混炼行为与NR和溶液聚合钛系异戊橡胶(IR-10)相当,在110～130℃时,胶料的挤出性能可达良级;口型膨胀(B)位随温度和生胶[η]的增大而略有增加,在[η]相同时,B值与IR-10胶料相近。但小于NR胶料。硫化湿度为143℃时,LnIR硫化胶的性能除拉伸强度和扯断伸长率外,其他均对硫化时间不敏感,从综合性能考虑,硫化时间应为20～40min,LnIR硫化胶的拉伸强度和撕裂强度稍低于IR-10和NR硫化胶,而回弹性、低温性能、生热和抗湿滑性等均优于或相当于后两者。为获得良好综合性能的硫化胶。LnIR[η]应为4.0～6.0dL/g。