999 resultados para Antenas tipo microfita


Relevância:

20.00% 20.00%

Publicador:

Resumo:

The mesoporous molecular sieves of MCM-41 and AlMCM-41 type are considered as promising support for metal in the refining processes of petroleum-based materials as catalysts and adsorbents for environmental protection. In this work the molecular sieves MCM-41 and AlMCM-41 were synthesized by replacing the source of silica conventionally used, for quartz, an alternative and abundant, and the use of waste from the production of diatomaceous earth, an aluminum-silicate, as a source aluminum, due to abundant reserves of diatomaceous earth in the state of Rio Grande do Norte in the city of Ceará-Mirim, with the objective of producing high-value materials that have similar characteristics to traditional commercial catalysts in the market. These materials were synthesized by the method of hydrothermal synthesis at 100 º C for 7 days and subjected to calcination at 500 º C for 2 hours under flow of nitrogen and air. The molecular sieves were characterized by X-ray diffraction (XRD), differential thermal analysis (DTA) and thermogravimetric analysis (TG), adsorption of N2 (BET and BJH methods), spectroscopy in the infra red (FTIR), microscopy scanning electron (SEM) and transmission electron microscopy (TEM). The analysis indicated that the synthesized materials showed characteristic hexagonal structure of mesopores materials with high specific surface area and sort and narrow distribution of size of pores

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The partial fixed prosthodontics restoration is used to rehabilitate form and function of partial or total compromised teeth, having to remain permanently joined to remainder tooth. The most useful material on prosthodontics is the feldspar porcelain, commercialized as aluminosilicate powders. Dental porcelains are presented with limited mechanical properties to rehabilitate extensive spaces. The association with Ni-Cr metallic systems (metal-ceramic system) allows that the metallic substructure compensates the fragile porcelain nature, preserving the thermal insulation and aesthetics desirable, as well as reducing the possibility of cracking during matication efforts. Cohesive flaws by low mechanical strength connect the metallic substructure to the oral environment, characterized by a electrolytic solution (saliva), by aggressive temperature, pH cyclic changes and mechanical requests. This process results on ionic liberation that could promote allergic or inflammatory responses, and/or clinical degradation of ceramometal system. The aim of this study was to evaluate the presence of an intermediate titanium layer on the microscopic fracture behavior of porcelains on ceramometal systems. Plasma deposition of titanium films result in regular passivating oxide layers which act as barriers to protect the metallic substrate against the hazardous effects of corrosive saliva. Tribocorrosion tests were performed to simulate the oral environment and mechanical stress, making it possible the early detection of crack formation and growth on metal-ceramic systems, which estimate the adherence between the compounds of this system. Plain samples consisting of dental feldspar porcelain deposited either onto metallic substrates or titanium films were fired and characterized by scanning electron microscopy. The result showed that the titanium film improved the adherence of the system compared to conventional metal-ceramic interfaces, thus holding crack propagation

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Nickel-bases catalysts have been used in several reform reactions, such as in the partial oxidation of methane to obtain H2 or syngas (H2 + CO). High levels of conversion are usually obtained using this family of catalysts, however, their deactivation resulting from carbon deposition still remains a challenge. Different approaches have been tested aiming at minimizing this difficulty, including the production of perovskites and related structures using modern synthesis methods capable of producing low cost materials with controlled microstructural characteristics at industrial scale. To establish grounds for comparison, in the present study LaNixFe1-xO3 (x=0, 0.3 or 0.7) perovskites were prepared following the Pechini method and by microwave assisted self-combustion. All samples were sub sequently calcined at 900 °C to obtain the target phase. The resulting ceramic powders were characterized by thermogravimetric analysis, infrared spectroscopy, X ray diffraction, specific area and temperature programmed reduction tests. Calcined samples were also used in the partial oxidation reaction of methane to evaluate the level of conversion, selectivity and carbon deposition. The results showed that the calcined samples were crystalline and the target phase was formed regardless of the synthesis method. According to results obtained by Rietveld refinement, we observed the formation of 70.0% of LaNi0.3Fe0.7O3 and 30.0% of La2O3 for samples LN3F7-900- P, LN3F7-900-M and 41,6% of LaNi0.7Fe0.3O3, 30.7% of La2NiO4 and 27.7% of La2O3 for samples LN7F3-900-P and LN7F3-900-M.Temperature-programmed profiles of the LaNiO3 sample revealed the presence of a peak around 510 °C, whereas the LaFeO3 sample depicted a peak above 1000°C. The highest l evel of methane conversion was obtained for LaNiO3 synthesized by the Pechini method. Overall, catalysts prepared by the Pechini method depicted better conversion levels compared to those produced by microwave assisted self-combustion

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The Wireless Sensor Networks (WSN) methods applied to the lifting of oil present as an area with growing demand technical and scientific in view of the optimizations that can be carried forward with existing processes. This dissertation has as main objective to present the development of embedded systems dedicated to a wireless sensor network based on IEEE 802.15.4, which applies the ZigBee protocol, between sensors, actuators and the PLC (Programmable Logic Controller), aiming to solve the present problems in the deployment and maintenance of the physical communication of current elevation oil units based on the method Plunger-Lift. Embedded systems developed for this application will be responsible for acquiring information from sensors and control actuators of the devices present at the well, and also, using the Modbus protocol to make this network becomes transparent to the PLC responsible for controlling the production and delivery information for supervisory SISAL

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This work proposes a model to investigate the use of a cylindrical antenna used in the thermal method of recovering through electromagnetic radiation of high-viscosity oil. The antenna has a simple geometry, adapted dipole type, and it can be modelled by using Maxwell s equation. The wavelet transforms are used as basis functions and applied in conjunction with the method of moments to obtain the current distribution in the antenna. The electric field, power and temperature distribution are carefully calculated for the analysis of the antenna as electromagnetic heating. The energy performance is analyzed based on thermo-fluid dynamic simulations at field scale, and through the adaptation in the Steam Thermal and Advanced Processes Reservoir Simulator (STARS) by Computer Modelling Group (CMG). The model proposed and the numerical results obtained are stable and presented good agreement with the results reported in the specialized literature

Relevância:

20.00% 20.00%

Publicador:

Resumo:

In the artificial lift method by Electrical Submersible Pump (ESP), the energy is transmitted for the well´s deep through a flat electric handle, where it is converted into mechanical energy through an engine of sub-surface, which is connected to a centrifugal pump. This transmits energy to the fluid under the pressure form, bringing it to the surface In this method the subsurface equipment is basically divided into: pump, seal and motor. The main function of the seal is the protect the motor, avoiding the motor´s oil be contaminated by oil production and the consequent burning of it. Over time, the seal will be wearing and initiates a contamination of motor oil, causing it to lose its insulating characteristics. This work presents a design of a magnetic sensor capable of detecting contamination of insulating oil used in the artificial lift method of oil-type Electrical Submersible Pump (ESP). The objective of this sensor is to generate alarm signal just the moment when the contamination in the isolated oil is present, enabling the implementation of a predictive maintenance. The prototype was designed to work in harsh conditions to reach a depth of 2000m and temperatures up to 150°C. It was used a simulator software to defined the mechanical and electromagnetic variables. Results of field experiments were performed to validate the prototype. The final results performed in an ESP system with a 62HP motor showed a good reliability and fast response of the prototype.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Sexually transmitted diseases (STDs) are among the largest public health problems, especially in developing countries. The acquisition of these infections during early sexual activity is common and many infections have a benign course. However, in some pathogens remain in the state of latency can be reactivated and cause productive infection that may progress to severe forms. In addition, some of them are transmitted vertically resulting in congenital infection, causing immediate damage or long-term child. The classic risk factors for sexually transmitted agents are: early onset of sexual and reproductive health, multiple sexual partners throughout life, use of oral contraceptives and co-infections with different pathogens. We present the results of a cross-sectional study aimed to estimate the prevalence of genital infection by human papillomavirus (HPV), Herpes simplex virus (HSV) and Chlamydia trachomatis (CT) in a segment of the female population of the metropolitan area Christmas, among those who enrolled voluntarily sought, Basic Health Units for the examination of cancer screening cervix in the period 2008 to 2010. All participants, a total of 261 women answered a standard questionnaire by which identified the socio-demographic characteristics, classical risk factors for STDs, reproductive and sexual activity and smoking. Of each patient were obtained two samples, one for the completion of the Pap test for detection of cellular changes and the other processed for DNA extraction and analyzed by PCR (polymerase chain reaction) to detect the three pathogens studied. The population of the study was composed of sexually active women aged between 13 and 79 years, mean 38.7 years, most of them being married, low education levels and low incomes. The majority (87%) had normal results on cytology and only 2.7% had low-grade cytological abnormalities. Prevalence rates were 37.9% for HPV, 4.6% for CT and 26% for HSV. HPV prevalence was higher in women under 25, unmarried and in those who had multiple sexual partners. Women with simultaneous infection by HSV-1 and 2 had higher prevalence of HPV infection. The prevalence of HSV infection showed no association whatsoever with the risk factors analyzed and HSV-1 was the predominant type among the cases of genital HSV infection. The overall prevalence of C. Trachomatis was relatively low, thus providing greater value in younger women aged less than or equal to 20 years

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This study assessed the level of knowledge, attitude and practice of Pap smear and human papillomavirus (HPV), in addition to analyzing the prevalence of genital HPV infection, Herpes Simplex Type 2 (HSV-2) and Chlamydia trachomatis in teenagers. The study consisted of two approaches, one based only on interviews conducted with adolescents enrolled in public schools or in public health facilities in the city of Natal. The other approach involved only a group of 132 adolescents enrolled among those admitted to two health units in Natal-RN. This second group of participants two specimens were collected for laboratory analysis: one was directed to prepare the blade for the Pap test, and other processed for DNA extraction for molecular analysis, focusing on the detection of HPV, HSV-2 and C . trachomatis. The presence of DNA of the three pathogens was investigated by the technique of polymerase chain reaction (PCR). The presence of each of the three pathogens was analyzed in terms of socio-demographic characteristics, as well as sexual and reproductive activity to identify risk factors for infection and development of lesions of the uterine cervix. The results show that the adolescents in this study had levels of knowledge and attitude very low, both in relation to cytology to HPV as though they have made a reasonable percentage of adequate practice exam and prevention of HPV infection. The overall prevalence of HPV infection was 54.5% and 48.2% in adolescents with normal cytology and 86.4% in those with abnormal cytology. We observed a higher proportion of cases of infection in the age group of 18 to 21. The prevalence of HPV infection was slightly higher among pregnant teenagers. The overall prevalence of HSV-2 infection was 13.6% and 11.8% in women with normal cytology and 22.7% in those with abnormal cytology. A higher proportion of cases of infection was found in the age group from 14 to 17, with a slightly higher prevalence among pregnant women. The C. trachomatis was found with an overall prevalence of 19.7% and 21.8% in adolescents with normal cytology and 9.1% in those with abnormal cytology. The prevailing rate was highest in the age group 18 to 21 years and in nonpregnant

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Herpes simplex is a virus that can be transmitted sexually and is potentially associated with vertical transmission. This study evaluated the prevalence of genital infection by herpes simplex virus (HSV) types 1 and 2 in pregnant and nonpregnant care in the city of Natal / RN, including a total of 222 women, 92 pregnant and 130 nonpregnant. The participants answered a questionnaire to obtain data and socio-demographic characteristics, as well as potential risk factors for sexually transmitted diseases. After the interview, we collected two cervical specimens, one for the Pap test and the other for DNA extraction and analyzed by polymerase chain reaction (PCR) to detect both virus serotypes. Then the women underwent a clinical examination by colposcopy. For statistical analysis, we used the chi-square and logistic regression by SSPS 17.0 Statistic. Most women were up to 30 years of age, nonwhite ethnicity, married, elementary education, family income below the poverty level; initiated sexual activity with age up to 18 years; had more than one sexual partner lifelong and was not pregnant, but has had at least one child. The HSV-1 showed a prevalence of 26.1% among pregnant women and 30.0% in non-pregnant women. While HSV-2 prevalence was found with 10.9% and 19.2% in pregnant and nonpregnant women, respectively. The largest proportion of morphological changes of the uterine cervix was detected among nonpregnant women, both in cytology and in colposcopy. The women were nonwhite ethnicity, married, became pregnant aged less than or equal to 18 years and who had one to two pregnancies had a lower risk of acquiring genital HSV infection. There was a high prevalence of genital HSV infection, HSV-1 is more prevalent than HSV-2. No association was found between morphological changes of the uterine cervix and the presence of the virus in pregnant and nonpregnant women, nor between genital HSV infection and the classic risk factors for sexually transmitted diseases