Remoção de matéria orgânica e nitrogênio de efluentes provenientes de abatedouros de bovinos por meio de reator aeróbio operando em bateladas sequenciais com adição de coagulante químico

The volume of liquid effluent generated in cattle slaughterhouses is quite high and cannot be released untreated in water bodies due to its high pollution load of predominantly organic origin. To minimize the environmental impacts of its industrial wastewater and meet the local environmental legislation, abattoirs shall make the treatment of these effluents. The present work aims to develop the study of a reactor by sequential batch pilot scale, in order to optimize their performance in treating wastewater from a cattle slaughterhouse. The treatment system used was developed and installed in the Laboratory of Wastewater Treatment, in Faculty of Science and Technology UNESP, Presidente Prudente campus. The procedure used followed the operation of sequential batch reactors, in which all processes and treatment operations occurring sequentially in a single unit, by establishing specific operating cycles, which comprise the following separated phases: aerobic reaction, anoxic reaction, sedimentation and emptying. Aiming to improve the quality of treatment was planned the addition of coagulant Poly Aluminum Chloride (PAC) in the reactor, by determining their optimal dosage by Jar-test trials. Were prepared four steps with specific operating cycles: step one or acclimatization (10 hour of aeration, one hour and 30 minutes of sedimentation and 30 minutes for exchanging the effluent); step 2 (6 hours of aeration or aerobic phase, 4 hours and 45 minutes of stirring or anoxic phase and 1 hour and 15 minutes for sedimentation and exchange effluent); step 3 (2 hours and 30 minutes of aeration, 8 hours and 15 minutes of stirring and 1 hour and 15 minutes for sedimentation and exchange) and step 4 (2 hours of aeration, 8 hours and 45 minutes of stirring and 1 hour and 15 minutes for sedimentation and exchange)... (Complete abstract click electronic access below)

Utilização da programação por metas e análise por envoltória de dados para seleção de variedades de cana de açúcar para plantio em uma usina sucroalcooleira

Organizational change is occurring in the Brazilian agribusiness from sugar cane in recent decades. Aspects of management in this sector are being changed due to the importance of its products, especially ethanol and electricity. It is observed in the literature a lack of quantitative studies in this Brazilian sector, particularly the selection of sugarcane varieties for planting. This study proposes the use of Goal Programming (GP) with Data Envelopment Analysis (DEA) to select efficient varieties of sugarcane for planting in a sugar and ethanol milling company. The study allowed the identification of efficient sugarcane varieties. This way, it helped the company to make more reliable decisions, favoring the increase of productivity

Produção de cerveja, utilizando méis de diferentes origens botânicas como adjuntos

This study aimed to produce beer, using different botanical origins of honeys (orange, eucalyptus and wild), as malt adjuncts, and their Physical-chemical and sensorial characterizations. The production was made with malt, water, hops and honey. All musts were adjusted to 12 Brix, and the concentration of honey in the formulation was 45% (based on the extract), except for the control (0%). The physical and chemical analysis were performed on malt (extract content), honey (pH, free acidity, lactonic acidity, total acidity, color, turbidity, extract content, moisture content, reducing sugar, total reducing sugar and sucrose) in wort (content extract, pH, color, turbidity, fermentability ,bitterness and total acidity) and beer apparent extract, apparent fermentability, real extract, real fermentability, alcohol content, pH, total acidity, total foam, foam density , bitterness, carbon dioxide, color and turbidity). Sensory analysis was performed by nine-points hedonic scale testing. The attributes evaluated were appearance, aroma, flavor and overall. The results were submitted to ANOVA and means compared by Tukey testing at a 5% of probability. Beer with honey as adjuncts’ had high fermentability and low content of fat, compared to the pure malt beer. The addition of honey as an adjunct did not affect the majority of the physical-chemical parameters, except for turbidity, whereas beer with honey showed the highest value for this feature, in addition, it has also presented their biterness differences the values for beer with honey were lower. The different types of honeys did not affect the acceptability of beer, however, the beer with honey showed greater acceptance between beer with malt and honey

Avaliação da adição da Lactobacillus acidophilus CRL 1014 e Enterococcus faecium CRL 183 sobre a microbiota intestinal em Simulador do Ecossistema Microbiano Humano (SEMH)

Os micro-organismos probióticos são utilizados em vários produtos alimentícios ou em suplementos alimentares. Simuladores intestinais representam uma opção de realização de estudos com a microbiota intestinal. O simulador do ecossistema microbiano humano (SEMH) consiste em uma sucessão de cinco reatores conectados que representam as diferentes partes do trato gastrointestinal humano com seus respectivos valores de pH, tempo de residência e capacidade volumétrica. O SEMH foi utilizado para estudar o efeito do Enterococcus faecium CRL 183 e do Lactobacillus acidophilus CRL 1014 sobre a microbiota intestinal nativa. Inicialmente, o inóculo preparado com fezes humanas foi introduzido nos três reatores, responsáveis por simular o cólon ascendente, transverso e descendente. Após duas semanas de estabilização foi adicionado, diariamente, durante quatro semanas, E. faecium CRL 183 e L. acidophilus CRL 1014 contendo 108 UFC/mL nos três compartimentos que simulam o cólon ascendente, transverso e descendente. Após as quatro semanas de tratamento o sistema permaneceu durante duas semanas sem adição de probióticos. Durante todo o experimento, foi realizado semanalmente a composição da microbiota intestinal baseada na enumeração de bactérias aeróbias e anaeróbias totais, Enterococcus spp., Lactobacillus spp., Bifidobacterium spp., Enterobactérias e Clostridium spp. Semanalmente, também, foram realizadas análises de ácidos graxos de cadeia curta (acetato, butirato e propionato) e amônia. Através da análise microbiológica observou-se alterações significativas na composição da microbiota do SEMH no decorrer do período do experimento. Alterações significativas também foram observadas na concentração de amônia e de AGCC, podendo assim observar a influência da inoculação de probióticos na microbiota nativa e os metabólitos produzidos por ela

Estudo comparativo de dois tipos de painéis de MDP: com adição de papel impregnado e lâminas de bambu

This work is the production of two types of particle boards reconstructed MDP (Medium Density Particleboard), the first with the addition, in the inner layer of particles of impregnated paper, the ratios of 0%, 1%, 5% and 20 %. In the second type of panel MDP was inserted with blades of bamboo species Dendrocalumus giganteus as coatings and structural reinforcement. The MDP panel, used as a basis for both cases has the composition of three layers, two external particles with smaller particle size and an inner layer composed of particles of larger particle sizes. Assays were performed based on physical and mechanical NBR 14.810/2006 for the determination of the board density, thickness swelling, water absorption, moisture content, bending, tension parallel and perpendicular, and testing of particle sizes of the particles did not exists in standard references. The results were analyzed and compared the results of the commercial boards made from 100% eucalyptus, based on the limits specified by the ABNT NBR 14.810/2006. The values of the tests showed similar results indicating normative specifications in a positive way, the possibility of production of MDP with the use of waste paper impregnated. As for the panel with bamboo blades, the tests showed a mechanical performance far superior to MDP market, explaining the study and possible implementation of the bamboo for use where the MDP will suffer greater mechanical stress, such as doors, tops and benches tables