Neoadjuvant chemotherapy and radiotherapy followed by surgery in selected patients with stage IIIB non-small-cell lung cancer: a multicentre phase II trial.

BACKGROUND: Stage IIIB non-small-cell lung cancer (NSCLC) is usually thought to be unresectable, and is managed with chemotherapy with or without radiotherapy. However, selected patients might benefit from surgical resection after neoadjuvant chemotherapy and radiotherapy. The aim of this multicentre, phase II trial was to assess the efficacy and toxicity of a neoadjuvant chemotherapy and radiotherapy followed by surgery in patients with technically operable stage IIIB NSCLC. METHODS: Between September, 2001, and May, 2006, patients with pathologically proven and technically resectable stage IIIB NSCLC were sequentially treated with three cycles of neoadjuvant chemotherapy (cisplatin with docetaxel), immediately followed by accelerated concomitant boost radiotherapy (44 Gy in 22 fractions) and definitive surgery. The primary endpoint was event-free survival at 12 months. Efficacy analyses were done by intention to treat. This trial is registered with ClinicalTrials.gov, number NCT00030810. FINDINGS: 46 patients were enrolled, with a median age of 60 years (range 28-70). 13 (28%) patients had N3 disease, 36 (78%) had T4 disease. All patients received chemotherapy; 35 (76%) patients received radiotherapy. The main toxicities during chemotherapy were neutropenia (25 patients [54%] at grade 3 or 4) and febrile neutropenia (nine [20%]); the main toxicity after radiotherapy was oesophagitis (ten patients [29%]; nine grade 2, one grade 3). 35 patients (76%) underwent surgery, with pneumonectomy in 17 patients. A complete (R0) resection was achieved in 27 patients. Peri-operative complications occurred in 14 patients, including two deaths (30-day mortality 5.7%). Seven patients required a second surgical intervention. Pathological mediastinal downstaging was seen in 11 of the 28 patients who had lymph-node involvement at enrolment, a complete pathological response was seen in six patients. Event-free survival at 12 months was 54% (95% CI 39-67). After a median follow-up of 58 months, the median overall survival was 29 months (95% CI 16.1-NA), with survival at 1, 3, and 5 years of 67% (95% CI 52-79), 47% (32-61), and 40% (24-55). INTERPRETATION: A treatment strategy of neoadjuvant chemotherapy and radiotherapy followed by surgery is feasible in selected patients. Toxicity is considerable, but manageable. Survival compares favourably with historical results of combined treatment for less advanced stage IIIA disease. FUNDING: Swiss Group for Clinical Cancer Research (SAKK) and an unrestricted educational grant by Sanofi-Aventis (Switzerland).

EV01: a phase I trial in healthy HIV negative volunteers to evaluate a clade C HIV vaccine, NYVAC-C undertaken by the EuroVacc Consortium.

NYVAC-C (vP2010), a recombinant vector expressing HIV subtype C gag, pol, env and nef antigens, was tested in a phase I study in healthy, HIV negative volunteers in London and Lausanne. Twenty-four participants were randomised to receive NYVAC-C (20) or matching placebo (4) at weeks 0 and 4, and assessed for safety and immunogenicity over 48 weeks. There were no serious adverse events, and no clinical or laboratory abnormalities or other events that led to withdrawal, interruption or dose reduction of the NYVAC-C/placebo. Half of the 10 assessed responded in the ELISpot assay under stringent criteria, which informed the sample size for a DNA-NYVAC-C comparison to NYVAC-C alone.

Phase III study of ACVBP versus ACVBP plus rituximab for patients with localized low-risk diffuse large B-cell lymphoma (LNH03-1B).

Background The superiority of a chemotherapy with doxorubicin, cyclophosphamide, vindesine, bleomycin and prednisone (ACVBP) in comparison with cyclophosphamide, doxorubicin, vincristin and prednisone plus radiotherapy for young patients with localized diffuse large B-cell lymphoma (DLBCL) was previously demonstrated. We report the results of a trial which evaluates the role of rituximab combined with ACVBP (R-ACVBP) in these patients. Patients and methods Untreated patients younger than 66 years with stage I or II DLBCL and no adverse prognostic factors of the age-adjusted International Prognostic Index were randomly assigned to receive three cycles of ACVBP plus sequential consolidation with or without the addition of four infusions of rituximab. Results A total of 223 patients were randomly allocated to the study, 110 in the R-ACVBP group and 113 in the ACVBP group. After a median follow-up of 43 months, our 3-year estimate of event-free survival was 93% in the R-ACVBP group and 82% in the ACVBP group (P = 0.0487). Three-year estimate of progression-free survival was increased in the R-ACVBP group (95% versus 83%, P = 0.0205). Overall survival did not differ between the two groups with a 3-year estimates of 98% and 97%, respectively (P = 0.686). Conclusion In young patients with low-risk localized DLBCL, rituximab combined with three cycles of ACVBP plus consolidation is significantly superior to ACVBP plus consolidation alone.

A two-phase composite in simple shear: Effective mechanical anisotropy development and localization potential

We present a combined shape and mechanical anisotropy evolution model for a two-phase inclusion-bearing rock subject to large deformation. A single elliptical inclusion embedded in a homogeneous but anisotropic matrix is used to represent a simplified shape evolution enforced on all inclusions. The mechanical anisotropy develops due to the alignment of elongated inclusions. The effective anisotropy is quantified using the differential effective medium (DEM) approach. The model can be run for any deformation path and an arbitrary viscosity ratio between the inclusion and host phase. We focus on the case of simple shear and weak inclusions. The shape evolution of the representative inclusion is largely insensitive to the anisotropy development and to parameter variations in the studied range. An initial hardening stage is observed up to a shear strain of gamma = 1 irrespective of the inclusion fraction. The hardening is followed by a softening stage related to the developing anisotropy and its progressive rotation toward the shear direction. The traction needed to maintain a constant shear rate exhibits a fivefold drop at gamma = 5 in the limiting case of an inviscid inclusion. Numerical simulations show that our analytical model provides a good approximation to the actual evolution of a two-phase inclusion-host composite. However, the inclusions develop complex sigmoidal shapes resulting in the formation of an S-C fabric. We attribute the observed drop in the effective normal viscosity to this structural development. We study the localization potential in a rock column bearing varying fraction of inclusions. In the inviscid inclusion case, a strain jump from gamma = 3 to gamma = 100 is observed for a change of the inclusion fraction from 20% to 33%.

FANCD2 binds MCM proteins and controls replisome function upon activation of s phase checkpoint signaling.

Proteins disabled in Fanconi anemia (FA) are necessary for the maintenance of genome stability during cell proliferation. Upon replication stress signaling by ATR, the FA core complex monoubiquitinates FANCD2 and FANCI in order to activate DNA repair. Here, we identified FANCD2 and FANCI in a proteomic screen of replisome-associated factors bound to nascent DNA in response to replication arrest. We found that FANCD2 can interact directly with minichromosome maintenance (MCM) proteins. ATR signaling promoted the transient association of endogenous FANCD2 with the MCM2-MCM7 replicative helicase independently of FANCD2 monoubiquitination. FANCD2 was necessary for human primary cells to restrain DNA synthesis in the presence of a reduced pool of nucleotides and prevented the accumulation of single-stranded DNA, the induction of p21, and the entry of cells into senescence. These data reveal that FANCD2 is an effector of ATR signaling implicated in a general replisome surveillance mechanism that is necessary for sustaining cell proliferation and attenuating carcinogenesis.

Concept Highway Maintenance Vehicle, Final Report, Phase Two, 1998

This report documents Phase II activities of a potentially four-phase project. The goal of the project is to study the feasibility of using advanced technologies from other industries to improve the efficiency and safety of winter highway maintenance vehicle operations. State departments of transportation from Iowa, Minnesota, and Michigan initially formed the study consortium, and several private vendors have become project partners. The Center for Transportation Research and Education (CTRE) at Iowa State University is managing project tasks

2012 Emergency Response Guidebook: A Guidebook for First Responders During the Initial Phase of a Dangerous Goods/ Hazardous Materials Transportation Incident,

A Guidebook for First Responders During the Initial Phase of a Dangerous Goods/Hazardous Materials Transportation Incident.

Solid phase crystallization under continuous heating: kinetic and microstructure scaling laws

The kinetics and microstructure of solid-phase crystallization under continuous heating conditions and random distribution of nuclei are analyzed. An Arrhenius temperature dependence is assumed for both nucleation and growth rates. Under these circumstances, the system has a scaling law such that the behavior of the scaled system is independent of the heating rate. Hence, the kinetics and microstructure obtained at different heating rates differ only in time and length scaling factors. Concerning the kinetics, it is shown that the extended volume evolves with time according to αex = [exp(κCt′)]m+1, where t′ is the dimensionless time. This scaled solution not only represents a significant simplification of the system description, it also provides new tools for its analysis. For instance, it has been possible to find an analytical dependence of the final average grain size on kinetic parameters. Concerning the microstructure, the existence of a length scaling factor has allowed the grain-size distribution to be numerically calculated as a function of the kinetic parameters

Solid-phase microextraction as short-term sampling technique for BTEX occupational exposure

Solid phase microextraction (SPME) has been widely used for many years in various applications, such as environmental and water samples, food and fragrance analysis, or biological fluids. The aim of this study was to suggest the SPME method as an alternative to conventional techniques used in the evaluation of worker exposure to benzene, toluene, ethylbenzene, and xylene (BTEX). Polymethylsiloxane-carboxen (PDMS/CAR) showed as the most effective stationary phase material for sorbing BTEX among other materials (polyacrylate, PDMS, PDMS/divinylbenzene, Carbowax/divinylbenzene). Various experimental conditions were studied to apply SPME to BTEX quantitation in field situations. The uptake rate of the selected fiber (75 μm PDMS/CAR) was determined for each analyte at various concentrations, relative humidities, and airflow velocities from static (calm air) to dynamic (>200 cm/s) conditions. The SPME method also was compared with the National Institute of Occupational Safety and Health method 1501. Unlike the latter, the SPME approach fulfills the new requirement for the threshold limit value-short term exposure limit (TLV-STEL) of 2.5 ppm for benzene (8 mg/m3).

Martensitic phase transformation in rapidly solidified Mn50Ni40In10 alloy ribbons

Heusler alloy Mn50Ni40In10 was produced as preferentially textured ribbon flakes by melt spinning, finding the existence of martensitic-austenic transformation with both phases exhibiting ferromagnetic ordering. A microcrystalline three-layered microstructure of ordered columnar grains grown perpendicularly to ribbon plane was formed between two thin layers of smaller grains. The characteristic temperatures of the martensitic transformation were MS=213 K, Mf=173 K, AS=222 K, and Af=243 K. Austenite phase shows a cubic L21 structure (a=0.6013(3) nm at 298 K and a Curie point of 311 K), transforming into a modulated fourteen-layer modulation monoclinic martensite

Quantifying Uncertainty in Real Time Performance Measurement for Highway Winter Maintenance Operations – Phase 2, RB03-013, 2014

Winter weather in Iowa is often unpredictable and can have an adverse impact on traffic flow. The Iowa Department of Transportation (Iowa DOT) attempts to lessen the impact of winter weather events on traffic speeds with various proactive maintenance operations. In order to assess the performance of these maintenance operations, it would be beneficial to develop a model for expected speed reduction based on weather variables and normal maintenance schedules. Such a model would allow the Iowa DOT to identify situations in which speed reductions were much greater than or less than would be expected for a given set of storm conditions, and make modifications to improve efficiency and effectiveness. The objective of this work was to predict speed changes relative to baseline speed under normal conditions, based on nominal maintenance schedules and winter weather covariates (snow type, temperature, and wind speed), as measured by roadside weather stations. This allows for an assessment of the impact of winter weather covariates on traffic speed changes, and estimation of the effect of regular maintenance passes. The researchers chose events from Adair County, Iowa and fit a linear model incorporating the covariates mentioned previously. A Bayesian analysis was conducted to estimate the values of the parameters of this model. Specifically, the analysis produces a distribution for the parameter value that represents the impact of maintenance on traffic speeds. The effect of maintenance is not a constant, but rather a value that the researchers have some uncertainty about and this distribution represents what they know about the effects of maintenance. Similarly, examinations of the distributions for the effects of winter weather covariates are possible. Plots of observed and expected traffic speed changes allow a visual assessment of the model fit. Future work involves expanding this model to incorporate many events at multiple locations. This would allow for assessment of the impact of winter weather maintenance across various situations, and eventually identify locations and times in which maintenance could be improved.

15-OR: Multi-phase postmortem CT angiography of pulmonary embolism: technique-related artefacts or real findings?

Multi-phase postmortem CT angiography (MPMCTA) is recognized as a valuable tool to explore the vascular system, with higher sensitivity than conventional autopsy. However, a limitation is the impossibility to diagnose pulmonary embolism (PE) due to post-mortem blood clots situated in pulmonary arteries. The purpose of this study was to explore an eventual possibility to distinguish between real PE and artefacts mimicking PE. Our study included 416 medico-legal cases. All of them underwent MPMCTA, conventional autopsy and histological examination. We selected cases presenting arterial luminal filling defects in the pulmonary arteries. Their radiological interpretation was confronted to the one of autopsy and histological examination. We also investigated an eventual correlation between artefacts in pulmonary arteries and those in other parts of the vascular system. In 123 cases, filling defects of pulmonary arteries were described during MPMCTA. In 57 cases, this was interpreted as artefact and in 4 cases as suspected PE. In 62 cases only a differential diagnosis was made. Autopsy and histology could clearly identify the artefacts as such. Only one case of real PE was radiologically misinterpreted as artefact. In 6 of the 62 cases with no interpretation a PE was diagnosed. In 3 out of 4 suspected cases, PE was confirmed. We found out that filling defects in pulmonary arteries are nearly always associated to other vascular artefacts. Therefore, we suggest following some rules for radiological interpretation in order to allow a reliable diagnosis of pulmonary embolism after MPMCTA.

Pegfilgrastim after high-dose chemotherapy and autologous peripheral blood stem cell transplant: phase II study.

Pegfilgrastim is equivalent to daily filgrastim after standard dose chemotherapy in decreasing the duration of neutropenia. Daily filgrastim started within 1-4 days after autologous stem cell transplant (ASCT) leads to significant decrease in time to neutrophil engraftment. We undertook a study of pegfilgrastim after high-dose chemotherapy (HDC) and ASCT. In all, 38 patients with multiple myeloma or lymphoma, eligible to undergo HDC and ASCT, were enrolled. Patients received a single dose of 6 mg pegfilgrastim subcutaneously 24 h after ASCT. There were no adverse events secondary to pegfilgrastim. All patients engrafted neutrophils and platelets with a median of 10 and 18 days, respectively. The incidence of febrile neutropenia was 49% (18/37). Neutrophil engraftment results were compared to a historical cohort of patients who received no growth factors or prophylactic filgrastim after ASCT. Time to neutrophil engraftment using pegfilgrastim was comparable to daily filgrastim and was shorter than in a historical group receiving no filgrastim (10 vs 13.7 days, P<0.001). Pegfilgrastim given as a single fixed dose of 6 mg appears to be safe after HDC and ASCT. It accelerates neutrophil engraftment comparable to daily filgrastim after ASCT. Pegfilgrastim may be convenient to use in outpatient transplant units.