Inoculação de sementes com bactéria diazotrófica e aplicação de nitrogênio em cobertura e foliar em milho

Considering the importance of nitrogen management and its biological fixation with diazotrophic bacteria, this study was carried out aiming to evaluate the agronomic performance of maize, in response to seed inoculation with Azospirillum brasilense and nitrogen application in side-dressing and leaf. The experiment was conducted in Selvíria, Mato Grosso of Sul State, Brazil, during the growing season 2010/2011, on a clayey Rhodic Haplustox (20° 20' S and 51° 24' W, with altitude of 340 m). Sixteen treatments were established with four replications, in randomized blocks with the combination of the factors A. brasilense (with and without inoculante), nitrogen rate (0 and 90 kg ha-1, in V5 growth stage) and urea leaf application (0, 4, 8 and 12%: application in V5 and V8 growth stage). The maize hybrid used was the DKB 390 YG®, sowed in the row spacing of 0.9 m. Parameters measured were productive and morphological components of culture and crop yield. Increase in maize yield by seed inoculation with A. brasilense was observed. The application of 90 kg ha -1 of nitrogen in side-dressing provided higher chlorophyll leaf index, stalk diameter and prolificacy, however, the yield not was increased. The application of urea leaf did not agronomic efficiency and, therefore, should not be used as the unique form of supply and alternative to nitrogen addition to crop.

Rubber tree early selection for yield stability in time and among locations

Rubber production in the rubber tree [Hevea brasiliensis (Willd. ex Adr. de Juss.) Muell. Arg.] can be expressed differently in different environments. Thus the objective of the present study was to select productive progenies, stable and responsive in time and among locations. Thirty progenies were assessed by early yield tests at three ages and in three locations. A randomized block design was used with three replications and ten plants per plot, in 3 × 3 m spacing. The procedure of the mixed linear Reml/Blup model-restricted maximum likelihood/best non-biased linear prediction was used in the genetic statistical analyses. In all the individual analyses, the values observed for the progeny average heritability (ĥpa 2) were greater than those of the additive effect based on single individuals (ĥa 2) and within plot additive (ĥad 2). In the joint analyses in time, there was genotype × test interaction in the three locations. When 20 % of the best progenies were selected the predicted genetic gains were: Colina GG = 24.63 %, Selvíria GG = 13.63 %, and Votuporanga GG = 25.39 %. Two progenies were among the best in the analyses in the time and between locations. In the joint analysis among locations there was only genotype × location interaction in the first early test. In this test, selecting 20 %, the general predicted genetic gain was GG = 25.10 %. Identifying progenies with high and stable yield over time and among locations contributes to the efficiency of the genetic breeding program. The relative performance of the progenies varies depending of the age of early selection test. © 2013 Springer Science+Business Media Dordrecht.

Thermal stability of ionene polymers

Two different cationic polymers of the same chemical type and with very similar chemical structures were reacted with a natural bentonite over a wide range of polymer/clay ratios. This study involved the synthesis of cationic aliphatic ammonium polyionenes, specifically 3,6-ionene and 3,6-dodecylionene. Ionenes are ion-containing polymers that contain quaternary nitrogen atoms in the main macromolecular chain as opposed to a pendant chain. The CHN content, basal spacing, and elemental composition of each of the polymer-clay complexes were analyzed by X-ray diffraction, X-ray fluorescence, and thermogravimetry. All the polycations reacted to form interlayer complexes with clay, which displaced more Na+ and little Ca2+. Sodium and calcium were both present as interlayer cations in the clay and its complexes. The TG/DTG curves show that both polymers underwent thermal degradation in more than one stage. Specifically, 3,6-ionene was found to undergo two stages of decomposition and 3,6-dodecylionene undergo three stages. The behavior of the TG/DTG curves and the activation energy values suggest that 3,6-dodecylionene (E = 174,85 kJ mol-1) complexes have greater thermal stability than 3,6-ionene (E = 115,52 kJ mol-1) complexes. The mechanism of degradation suggests a direct interaction with the dodecyl chain containing 12 carbons, which are present in 3,6-dodecylionene but not in 3,6-ionene. © 2012 Akadémiai Kiadó, Budapest, Hungary.

Sparse arrays and image compounding techniques for non-destructive testing using guided acoustic waves

Piezoelectric array transducers applications are becoming usual in the ultrasonic non-destructive testing area. However, the number of elements can increase the system complexity, due to the necessity of multichannel circuitry and to the large amount of data to be processed. Synthetic aperture techniques, where one or few transmission and reception channels are necessary, and the data are post-processed, can be used to reduce the system complexity. Another possibility is to use sparse arrays instead of a full-populated array. In sparse arrays, there is a smaller number of elements and the interelement spacing is larger than half wavelength. In this work, results of ultrasonic inspection of an aluminum plate with artificial defects using guided acoustic waves and sparse arrays are presented. Synthetic aperture techniques are used to obtain a set of images that are then processed with an image compounding technique, which was previously evaluated only with full-populated arrays, in order to increase the resolution and contrast of the images. The results with sparse arrays are equivalent to the ones obtained with full-populated arrays in terms of resolution. Although there is an 8 dB contrast reduction when using sparse arrays, defect detection is preserved and there is the advantage of a reduction in the number of transducer elements and data volume. © 2013 Brazilian Society for Automatics - SBA.

Variação genética em progênies de jacaranda cuspidifolia mart. Utilizando o delineamento sistemático tipo leque

Knowledge of genetic variation in native tree species has helped direct strategies of genetic ex situ conservation, based on provenances and progenies tests. These tests use fixed spacing, not allowing evaluating the behavior of different progenies under this management variable. One way to evaluate simultaneously the genetic variation and different spacing in a small planting area is to use a systematic design. The aim of this study was to estimate the genetic variation and to evaluate its performance in Jacaranda cuspidifolia under different spacing. We used a progeny test in a systematic fan design, arranged in a system of 30 concentric rays, with one progeny per ray, randomly, at angles of 12°. The plants were arranged in rays in geometric progression of ratio 1.21, corresponding to nine for plant spacing: 1,95 m2; 2,86 m2; 4,18 m2; 6,12 m2; 8,96 m2; 13,12 m2; 19,21 m2; 28,13 m2; e 41,19 m 2 installed in Selvíria/MS. The traits height, height diameter of 30 cm to soil (DA3) and survival were evaluated at 12 and 24 months of age. Estimates of genetic parameters and spacing were evaluated using the procedure REML/BLUP (restricted maximum likelihood / best linear unbiased prediction). The progenies showed genetic variation, showing that the sample strategy to ex situ conservation was efficient. The species showed good adaptability inthe field and the best performance in treating five, equivalent to a 3 × 3 m spacing, with 8,96 m2;/plant for all traits. The fan systematic design permitted to evaluate in a small area the silvicultural behavior of J. Cuspidifolia plants in spacing varying from 2 to 42 m2/plant (5.000 to 238 trees/ha); which could hardly be evaluat by the traditional designs.

Variabilidade espacial de atributos físicos em um cambissolo háplico, sob diferentes usos na região sul do Amazonas

Considering the importance of knowledge of the spatial distribution of soil properties, the purpose of this study was to evaluate the spatial variability of physical properties in a Cambisolunder different land uses in the southern Amazon region. The study was conducted on three farms with cassava, sugarcane, and agroforestry, in the region of Humaitá, in the south of the State of Amazonas. In these areas, 70 x 70 m grids were established, with a regular spacing of 10 x 10 m and a total of 64 points, where soils were sampled at 0.0-0.10 m depth. Texture (sand, silt, and clay), macroporosity, microporosity, total porosity, bulk density, and aggregate stabilitywere determined. The data were analyzed using descriptive statistics and geostatistics. It was found that the propertiesvaried spatially and that the range of these variations between land uses was different, with the highest variability for the sugarcane management.

Nitrogen and potassium concentrations in the nutrients solution for melon plants growing in coconut fiber without drainage

With the objective of evaluating the effects of N and K concentrations for melon plants, an experiment was carried out from July 1, 2011 to January 3, 2012 in Muzambinho city, Minas Gerais State, Brazil. The Bonus no. 2 was cultivated at the spacing of 1.1 × 0.4. The experimental design was a randomized complete block with three replications in a 4 × 4 factorial scheme with four N concentrations (8, 12, 16, and 20 mmol L-1) and four K concentrations (4, 6, 8, and 10 mmol L-1). The experimental plot constituted of eight plants. It was observed that the leaf levels of N and K, of N-NO3 and of K, and the electrical conductivity (CE) of the substrate increased with the increment of N and K in the nutrients' solution. Substratum pH, in general, was reduced with increments in N concentration and increased with increasing K concentrations in the nutrients' solution. Leaf area increased with increments in N concentration in the nutrients solution. Fertigation with solutions stronger in N (20 mmol L-1) and K (10 mmol L-1) resulted in higher masses for the first (968 g) and the second (951 g) fruits and crop yield (4,425 gm-2). © 2013 Luiz Augusto Gratieri et al.

Correlative light-electron fractography for fatigue striations characterization in metallic alloys

The correlative light-electron fractography technique combines correlative microscopy concepts to the extended depth-from-focus reconstruction method, associating the reliable topographic information of 3-D maps from light microscopy ordered Z-stacks to the finest lateral resolution and large focus depth from scanning electron microscopy. Fatigue striations spacing analysis can be precisely measured, by correcting the mean surface tilting with the knowledge of local elevation data from elevation maps. This new technique aims to improve the accuracy of quantitative fractography in fatigue fracture investigations. Microsc. Res. Tech. 76:909-913, 2013. © 2013 Wiley Periodicals, Inc.

Obtenção de fosfatos de cálcio pelo método biomimético sobre a superfície da liga Ti-6Al-4V modificada pelo laser Nd:YAG

In this work, surface modification of the Ti-6Al-4V alloy by irradiation with a Nd:YAG laser beam was studied. The matrix spacing was varied and the other parameters were kept constant. After theirradiation, the samples were immersed into SBF solution (Simulated Body Fluid) for 7 days at 37 ° C for nucleation and formation of calcium phosphates. After this period, the samples were subjected to a heat treatment at 600 °C. X-ray diffraction results indicated the formation of a mixture of phases containing hydroxyapatite and tricalcium phosphate. Infrared analysis demonstrated the presence of bands related to hydroxyapatite. SEM micrographs showed that different matrix spacing used leads to the formation of different morphologies.The 0.01 cm spacing induced the formation of microspheres, characteristic of the hydroxyapatite phase, while for 0.02 cm spacing, only a non-homogeneous coating was obtained. Therefore, the use of laser in the production of active surfaces for deposition of bioceramics proved to be viable, and the final coating has potential for applications in the field of dental implants.

Avaliação de híbridos de mamona de porte baixo em espaçamento reduzido em condições de safrinha

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Densidades e arranjos populacionais de milho e componentes agronômicos

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Efeitos fisiológicos da piraclostrobina em plantas de feijão (Phaseolus vulgaris L.) condicionado sob diferentes tensões de água no solo

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Expressão sexual em linhagens de mamona (Ricinus communis L.)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)