Simulation and material calibration of ultra high strength steel (UHSS) S960 welded joint under static tensile test utilizing finite element method (FEM)

The aim of this work was to calibrate the material properties including strength and strain values for different material zones of ultra-high strength steel (UHSS) welded joints under monotonic static loading. The UHSS is heat sensitive and softens by heat due to welding, the affected zone is heat affected zone (HAZ). In this regard, cylindrical specimens were cut out from welded joints of Strenx® 960 MC and Strenx® Tube 960 MH, were examined by tensile test. The hardness values of specimens’ cross section were measured. Using correlations between hardness and strength, initial material properties were obtained. The same size specimen with different zones of material same as real specimen were created and defined in finite element method (FEM) software with commercial brand Abaqus 6.14-1. The loading and boundary conditions were defined considering tensile test values. Using initial material properties made of hardness-strength correlations (true stress-strain values) as Abaqus main input, FEM is utilized to simulate the tensile test process. By comparing FEM Abaqus results with measured results of tensile test, initial material properties will be revised and reused as software input to be fully calibrated in such a way that FEM results and tensile test results deviate minimum. Two type of different S960 were used including 960 MC plates, and structural hollow section 960 MH X-joint. The joint is welded by BöhlerTM X96 filler material. In welded joints, typically the following zones appear: Weld (WEL), Heat affected zone (HAZ) coarse grained (HCG) and fine grained (HFG), annealed zone, and base material (BaM). Results showed that: The HAZ zone is softened due to heat input while welding. For all the specimens, the softened zone’s strength is decreased and makes it a weakest zone where fracture happens while loading. Stress concentration of a notched specimen can represent the properties of notched zone. The load-displacement diagram from FEM modeling matches with the experiments by the calibrated material properties by compromising two correlations of hardness and strength.

Tetrazolium test for evaluating triticale seed viability

Freshly harvested triticale seeds are usually dormant, making the immediate evaluation of the physiological potential of seed lots difficult. We evaluated different triphenyl tetrazolium chloride (TTC) test methods for rapidly determining the viability of four seed lots of x.Triticosecale Wittmack cultivar IPR111. The test variables were: Preconditioning, (i) placing whole seeds between moistened paper towels or (ii) directly soaking the seeds in water, both procedures being conducted at 20 ºC for 18 hours; Post-conditioning seed preparation, (i) longitudinal bisection of the seed through the embryo with one half being stained and the other discarded or (ii) longitudinal bisection with both halves being stained; Staining for three and four hours, in the dark, with 0.1%, 0.5% or 1.0% (w/v) TTC according to the preconditioning method described above, (i) both halves of each seed were placed on filter paper moistened with TTC and maintained at 40 ºC or (ii) one half of each seed was immersed in 5 mL of TTC solution in a 100 mL glass beaker at 30 ºC. The best results were obtained by preconditioning seeds between moistened paper towels at 20 ºC for 18 hours and staining on filter paper with 1.0% (w/v) TTC for three hours at 40 ºC.

Viability of barley seeds by the tetrazolium test

The tetrazolium test is used to control seed quality of various plant species since it allows a rapid evaluation of viability. Freshly harvested barley seeds show dormancy that can make the germination test ineffective for an immediate evaluation. Therefore, the development of more efficient methods, such as the tetrazolium test, is necessary. The objective of this research work was to study various procedures for performing the tetrazolium test on barley seeds. Five lots of cv. BRS 195 barley seeds were used and subjected to the following treatments: two different methods of seed preconditioning (direct immersion in H2O and between sheets of moistened paper towels); two types of preparation for staining (longitudinal cross-section of the seed through the embryo with immersion of one half in a 2,3,5 triphenyl tetrazolium chloride solution or placing both halves on top of filter paper moistened with the tetrazolium salt solution); two methods of staining (on top of filter paper and direct immersion in the tetrazolium salt solution). Three concentrations of the tetrazolium salt solution (0.1%, 0.5%, and 1.0%) were used. It was concluded that the tetrazolium test on barley seeds may be accomplished with preconditioning by direct immersion in H2O and staining by immersing in a 0.1% or 0.5% concentration of tetrazolium salt solution or staining on top of filter paper moistened with such solution at a 1.0% concentration.

Test of exudates color hues for evaluating the physiological potential of coffee (Coffea arabica L.) seeds

Coffee seeds have slow and irregular germination, losing fast their viability during storage, and the standard germination test of these seeds requires at least 30 days. Besides, the results may not reflect the actual physiological quality of these seeds. The objective of this work was to develop a fast and practical test for evaluating the viability of coffee seeds, which is based on the interpretation of different color hues of exudates from seeds. Coffee seeds of the cultivar Catuai 44 from six lots were submitted to germination, accelerated aging, and electrical conductivity tests. In the exudates color hue test, coffee seeds without the parchment and the silvery pellicle (four replications of 10 seeds each) were distributed on top of paper towels moistened and then maintained into a germinator, at 25 ºC for 24, 48, 72, 96, and 120 h. Three classes of color hues were established: colorless, light color hue, and dark color hue, assigning the values of 0, 1, and 3, for each class, respectively. The proposed exudates color hue test can be recommended for the fast assessment of viability for coffee seeds. The most promising results were obtained for seeds with 12% moisture content, after imbibition periods of 72, 96, and 120 h; and with 30% moisture content, after imbibition periods of 72 and 120 h.

Automated UI testing. WBCT, a computer-automated user test environment tool.

Today, the user experience and usability in software application are becoming a major design issue due to the adaptation of many processes using new technologies. Therefore, the study of the user experience and usability might be included in every software development project and, thus, they should be tested to get traceable results. As a result of different testing methods to evaluate the concepts, a non-expert on the topic might have doubts on which option he/she should opt for and how to interpret the outcomes of the process. This work aims to create a process to ease the whole testing methodology based on the process created by Seffah et al. and a supporting software tool to follow the procedure of these testing methods for the user experience and usability.

Concept Test evaluación de potencial y aceptación para el nuevo

Banco del conocimiento

Pre test evaluación renovación matrícula mercantil

Banco del conocimiento

Herramienta Test Coequipero

Desarrollo empresarial y creación de empresa

Herramienta. Circunflejo test

Desarrollo empresarial y creación de empresa

Herramienta. Test competencias empresariales

Desarrollo empresarial y creación de empresa

Herramienta. Test de negociación

Desarrollo empresarial y creación de empresa

Herramientas Auto-Test diagnóstico cliente

Desarrollo empresarial y creación de empresa