Preparation of nanofibre yarns from electrospun nonwoven strips

From ancient to modern time, humans have been trying to use finer fibres to make fibrous products for various purposes and believing that finer fibres have better aesthetic qualities. So far, the commercial fibres have been reduced to microns in diameter, but it seems difficult to further reduce the fibre fineness to submicrons using conventional fibre-making techniques.
Electrospinning is a promising technique to produce continuous fibres with diameters on nanometre scales. This technique involves stretching a polymer fluid under a strong electric field into fine filaments, which are deposited randomly on the electrode collector forming a nonwoven nanofibre mat in most cases. Despite considerable efforts in exploring the applications of electrospun nanofibres in non-fibrous fields [1], very limited work has been conducted on using this material to process mechanically robust nanofibre yarns [2,3].

The effect of hydrogenation on the ECAP compaction of Ti–6Al–4V powder and the mechanical properties of compacts

The effect of hydrogen content on the compaction of Ti–6Al–4V powder at low temperatures, namely 500 °C, using equal channel angular pressing (ECAP) with back pressure has been investigated. The properties of the compacts before and after a heat treatment and de-hydrogenation cycle have been determined. Compaction of powder by ECAP (500 °C and 260 MPa) has shown maximum levels of relative density of 99.3% and 99.4% when charged with 0.05–0.1 wt.% and 0.61–0.85 wt.% of hydrogen, respectively. After the de-hydrogenation heat treatment the diffusion bonding between individual powder particles was completed and the microstructure was altered, depending on the level of hydrogen content. Two local maxima of 99.2% and 98.1% were observed in the measured density of consolidated compacts for hydrogen contents between 0.05 wt.% and 0.1 wt.% and between 0.61 wt.% and 0.85 wt.%, respectively. However, the mechanical properties of the compacts within these two ranges of hydrogen content were significantly different due to a difference in the observed microstructure. An exceptionally high ductility of 29%, in combination with a relatively high strength of ~560 MPa, was measured in a shear punch test on specimens which had a prior hydrogen level of 0.05 wt.% before the heat treatment. It was shown that material consolidated from powder hydrogenated to low levels of hydrogen before compaction has the potential to offer substantial improvements in mechanical properties after a suitable heat treatment.

The impact of hatha yoga on smoking behavior

Cigarette smoking remains the single largest preventable cause of premature death and disease in many countries, including the US and Australia. It has been suggested that smokers are probably more likely to feel personally susceptible and therefore more likely to feel personally susceptible and therefore more likely to reduce smoking behavior, if they develop self-awareness of the impact of smoking. McIver et al examine the impact of a hatha yoga intervention on smoking behavior, predicting that yoga stretching and breath awareness practices focused on pulmonary health would promote a desire to stop smoking.

Low strain processing of LC and ULC steels

Temper rolling and tension levelling are commonly used to manufacture flat rolled steel. Both processes lengthen the steel at strains up to 3% by applying a load and stretching the strip. By latering the balance between the load and the tension the formability of the low carbon and ultra low carbon steel may be optimised.

NMR and Raman studies of a novel fast-ion-conducting polymer-in-salt electrolyte based on LiCF3SO3 and PAN

We report spectroscopic results from investigations of a novel solid polymeric fast-ion-conductor based on poly(acrylonitrile), (PAN, of repeat unit [CH₂CH(CN)]_n), and the salt LiCF₃SO3 . From NMR studies of the temperature and concentration dependencies of ⁷Li- and ^lH-NMR linewidths, we conclude that significant ionic motion occurs at temperatures close to the glass transition temperature of these polymer-in-salt electrolytes, in accordance with a recent report on the ionic conductivity. In the dilute salt-in-polymer regime, however, ionic motion appears mainly to be confined to local salt-rich domains, as determined from the dramatic composition dependence of the ionic conductivity. FT-Raman spectroscopy is used to directly probe the local chemical anionic environment, as well as the Li⁺–PAN interaction. The characteristic δ_s(CF₃) mode of the CF₃SO₃⁻ anion at _~750–780 cm^−l shows that the ionic substructure is highly complex. Notably, no spectroscopic evidence of free anions is found even at relatively salt-depleted compositions (e.g. N:Li_~60–10:1). A strong Li⁺–PAN interaction is manifested as a pronounced shift of the characteristic polymer C=N stretching mode, found at _~2244 cm^−l in pure PAN, to _~2275 cm^−l for Li⁺-coordinated C=N moieties. Our proton-NMR data suggest that upon complexation of PAN with LiCF3 SO₃, the glass transition occurs at progressively lower temperatures.

Modelling of tooling wear in trim dies for AHSS

Using Advanced High Strength Steels (AHSS) in forming and cutting dies generates higher loads in tools. Tool wear is an issue when applying AHSS. This study investigates the effect of process parameters such as clearance, material properties and punch/die bluntness on contact pressure values and tool wear. Some desirable process parameters that minimise wear have been found.

Epithelial cell folate is an accurate marker when compared with whole tissue biopsy folate for examining the role of folate status in colorectal cancer

Background – Epidemiological studies have shown low folate status is associated with colorectal cancer. Colonic tissue folate levels at different stages of cancer development should give important information, but different methodologies to extract the colonic tissue folates have been used. This has hampered progress in defining the relationship between systemic and tissue folate levels.
Objective – To evaluate two methods of colonic tissue preparation for estimation of total folate content.
Design – Whole tissue punch biopsy samples were obtained from the descending colon of 31individuals following a normal colonoscopy. Blood samples were obtained for the determination of plasma homocysteine (Hcy), red cell folate (RCF), methylenetetrahydrofolate reductase 677C>T genotype, and serum vitamin B12 and folate. Colonic tissue folate was measured both in washed whole tissue biopsies and in epithelial cells isolated from tissue biopsies.
Outcomes - Whole biopsy and epithelial cell folate concentrations were significantly correlated (R=.375; P=.038). Hcy was inversely correlated with both measures (R=-.365; P=.043 and R=-.364; P=.044 respectively). RCF was significantly correlated with isolated epithelial cell folate (R=.477; P=.007) but not with whole tissue biopsy folate (R=.264; P=.151). There were no significant associations between serum and colonic folate in this study.
Conclusion - Both methods are useful for comparing systemic and localised tissue folate status but epithelial cells may provide more reliable data.

Analytical solutions and finite element modelling of deep drawing process for cylindrical metal cups

Analytical modelling of deep drawing process is of value in preliminary process design to illustrate the influence of major variables including friction and strain hardening on punch loads, cup dimensions and process limits. In this study, analytical models including theoretical solution and a series of finite element models are developed to account for the influences of process parameters including friction coefficient, tooling geometry and material properties on deep drawing of metal cups. The accuracy of both the theoretical and finite element solutions is satisfactory compared with those from experimental work.

Neuromuscular adaptations to training, injury and passive interventions: implications for running economy

Performance in endurance sports such as running, cycling and triathlon has long been investigated from a physiological perspective. A strong relationship between running economy and distance running performance is well established in the literature. From this established base, improvements in running economy have traditionally been achieved through endurance training. More recently, research has demonstrated short-term resistance and plyometric training has resulted in enhanced running economy. This improvement in running economy has been hypothesized to be a result of enhanced neuromuscular characteristics such as improved muscle power development and more efficient use of stored elastic energy during running. Changes in indirect measures of neuromuscular control (i.e. stance phase contact times, maximal forward jumps) have been used to support this hypothesis. These results suggest that neuromuscular adaptations in response to training (i.e. neuromuscular learning effects) are an important contributor to enhancements in running economy. However, there is no direct evidence to suggest that these adaptations translate into more efficient muscle recruitment patterns during running. Optimization of training and run performance may be facilitated through direct investigation of muscle recruitment patterns before and after training interventions.

There is emerging evidence that demonstrates neuromuscular adaptations during running and cycling vary with training status. Highly trained runners and cyclists display more refined patterns of muscle recruitment than their novice counterparts. In contrast, interference with motor learning and neuromuscular adaptation may occur as a result of ongoing multidiscipline training (e.g. triathlon). In the sport of triathlon, impairments in running economy are frequently observed after cycling. This impairment is related mainly to physiological stress, but an alteration in lower limb muscle coordination during running after cycling has also been observed. Muscle activity during running after cycling has yet to be fully investigated, and to date, the effect of alterations in muscle coordination on running economy is largely unknown. Stretching, which is another mode of training, may induce acute neuromuscular effects but does not appear to alter running economy.

There are also factors other than training structure that may influence running economy and neuromuscular adaptations. For example, passive interventions such as shoes and in-shoe orthoses, as well as the presence of musculoskeletal injury, may be considered important modulators of neuromuscular control and run performance. Alterations in muscle activity and running economy have been reported with different shoes and in-shoe orthoses; however, these changes appear to be subject-specific and nonsystematic. Musculoskeletal injury has been associated with modifications in lower limb neuromuscular control, which may persist well after an athlete has returned to activity. The influence of changes in neuromuscular control as a result of injury on running economy has yet to be examined thoroughly, and should be considered in future experimental design and training analysis.

Automatic parameters selection for eigenfaces

In this paper, we investigate the parameters selection for Eigenfaces. Our focus is on the eigenvectors and threshold selection issues. We will propose a systematic approach in selecting the eigenvectors based on relative errors of the eigenvalues for the covariance matrix. In addition, we have proposed a method for selecting the classification threshold that utilizes the information obtained from the training data set. Experimentation was conducted on two benchmark face databases, ORL and AMP, with results indicating that the proposed automatic eigenvectors and threshold selection methods produce better recognition performance in terms of precision and recall rates. Furthermore, we show that the eigenvector selection method outperforms energy and stretching dimension methods in terms of selected number of eigenvectors and computation cost.

Finite element analysis of an axi-symmetric forward spiral extrusion of Mg-1.75Mn alloy

A potential severe plastic deformation process known as axi-symmetrical forward spiral extrusion (AFSE) has been studied numerically and experimentally. The process is based on the extrusion of cylindrical samples through a die with engraved spiral grooves in a near zero shape change manner. The process was simulated using a three dimensional finite element (FE) model that has been developed using commercial software, ABAQUS. In order to verify the finite element results, hot rolled and annealed samples of the alloy were experimentally processed by AFSE. The required extrusion forces during the process were estimated using the FE model and compared with the experimental values. The reasonable agreement between the FE results and experimental data verified the accuracy of the FE model. The numerical results indicate the linear strain distribution in the AFSE sample is only valid for a core concentric while the strain distribution in the vicinity of the grooves is non axi-symmetric. The FE simulation results from this research allows a better understanding of AFSE kinematics especially near the grooves, the required extrusion force and the resultant induced strain distribution in the sample. To compare the mechanical properties of the Mg-1.75Mn alloy before and after the process, a micro shear punch test was used. The tests were performed on samples undergoing one and four passes of AFSE. After four passes of AFSE, it was observed that the average shear strength of the alloy has improved by about 21%. The developedfinite element model enables tool design and material flow simulation during the process.

Automatic parameter selection for Eigenfaces

In this paper, we investigate the parameter selection issues for Eigenfaces. Our focus is on the eigenvectors and threshold selection issues. We propose a systematic approach in selecting the eigenvectors based on the relative errors of the eigenvalues. In addition, we have designed a method for selecting the classification threshold that utilizes the information obtained from the training database effectively. Experimentation was conducted on the ORL and AMP face databases with results indicating that the automatic eigenvectors and threshold selection methods provide an optimum recognition in terms of precision and recall rates. Furthermore, we show that the eigenvector selection method outperforms energy and stretching dimension methods in terms of selected number of eigenvectors and computation cost.

The awkwardness of Australian engagement with Asia : the dilemmas of Australian idea of regionalism

Australia has experienced difficulties engaging with Asia-Pacific regional integration. Despite Australian attempts to punch above its weight in regional forums and to be a regional leader, it is still not regarded as a full member or as quite fitting into the region. It is an ‘awkward partner’ in the Asian context, and has experienced the ‘liminality’ of being neither here nor there. The former Rudd government’s proposal for an ‘Asia Pacific Community’ (APC) by the year 2020 was a substantive initiative in Australia’s ongoing engagement with Asia. It has, however, attracted a high level of criticism both at home and abroad. The main critical analysis of the proposal has focused on institutional building or architecture, or its relationship with existing regional institutions, but overlooks a host of often fraught questions about culture,
norms, identities, and international power relations. The APC concept needs to be scrutinized in terms of these questions with a critical eye. This paper examines the cultural, cognitive, and normative dimensions of Rudd’s proposal. It analyses four dilemmas or awkward problems that the APC faces.

Spectroscopic characterization of alkali-metal exchanged natrolites

Synchrotron infrared (IR) and micro-Raman spectroscopic studies have been performed on zeolite natrolites as a function of the non-framework composition at ambient conditions. This establishes the spectroscopic characterization of the ion-exchanged natrolites in the alkali-metal series both in the as-prepared hydrated (M-NAT-hyd, M = Li, Na, K, Rb, and Cs) and some stable dehydrated forms (M-NAT-deh, M = Rb and Cs). The former series exhibits non-framework cation-size dependent opening of the helical channels to span ca. 21° range in terms of the chain rotation angle, ? (or ca. 45° range in terms of the chain bridging angle, T-O2-T). For these hydrated phases, both IR and Raman spectra reveal that the degree of the red-shifts in the frequencies of the helical 8-ring channel as well as the 4-ring unit is proportional to the ionic radius of the non-framework cations. Linear fits to the data show negative slopes of -55.7 from Raman and -18.3 from IR in the 8-ring frequencies and ionic radius relationship. The spectroscopic data are also used to identify the modes of the dehydration-induced "collapse" of the helical 8-ring channels as observed in the stable anhydrous Rb-NAT-deh and Cs-NAT-deh. In addition, we demonstrate that the spectroscopic data in the hydrated series can be used to distinguish different water arrangements along the helical channels based on the frequency shifts in the H-O-H bending band and the changes in the O-H stretching vibration modes.

Pressure-induced structural transitions in MOO3·xH2O (x = 1/2, 2) molybdenum trioxide hydrates : a raman study

The high-pressure behaviors of M_OO₃·1/2H₂O and M_OO₃·2H₂O have been investigated by Raman spectroscopy in a diamond anvil cell up to 31.3 and 30.3 GPa, respectively. In the pressure range up to around 30 GPa, both M_OO₃·1/2H₂O and M_OO₃·2H₂O undergo two reversible structural phase transitions. We observed a subtle structural transition due to O−H···O hydrogen bond in M_OO₃·1/2H₂O at 3.3 GPa. We found a soft mode phase transition in M_OO₃·2H₂O at 6.6 GPa. At higher pressures, a frequency discontinuity shift and appearance of new peaks occurred in both M_OO₃·1/2H₂O and M_OO₃·2H₂O, indicating that the second phase transition is a first-order transition. The frequency redshift of the O−H stretching bands of M_OO₃·1/2H₂O and M_OO₃·2H₂O are believed to be related to the enhancement of the O−H···O weak hydrogen bonds under high pressures.