Avaliação da atividade antifúngica de extrato de Plinia cauliflora e Endopleura uchi

O uso indiscriminado dos medicamentos sintéticos e a própria evolução dos micro-organismos selecionou espécies extremamente resistentes aos agentes químicos utilizados. Para contornar tal situação e ampliar o arsenal de compostos ativos contra micro-organismos, o estudo de plantas tornou-se uma necessidade crescente. A utilização de fitoterápicos na prevenção e/ou cura de doenças são necessários estudos prévios relativos a aspectos botânicos, farmacognósticos, fitoquímicos, farmacológicos e toxicológicos. Neste trabalho, foram estudados extratos obtidos com as folhas de Plinia cauliflora (Mart.) Kausel e de cascas pulverizadas de Endopleura uchi (Huber) Cuatrec., quanto às propriedades antimicrobianas frente a diferentes linhagens de fungos: Aspergillus niger, Beauveria bassiana, Metarhizium anisopliae, Trichoderma reesei e Trichophyton rubrum. Foram avaliadas as atividades antifúngicas dos materiais vegetais determinando sua Concentração Inibitória Mínima (CIM). Com base nesses dados foi realizada a avaliação da atividade antifúngica observando o crescimento radial dos fungos em placas de Petri contendo meio de cultura incorporado com os materiais vegetais nas concentrações de CIM e 1%, sendo após realizada a mensuração dos diâmetros formados. Trichophyton rubrum foi o micro-organismo que apresentou maior sensibilidade frente ao extrato e as frações de P. cauliflora, com valores de CIM baixos, enquanto que a cepa industrial de Aspergillus niger mostrou-se totalmente resistente a todos os extratos testados. A determinação da atividade antifúngica em placas contendo meio sólido, mostrou uma confirmação dos resultados pois o extrato etanólico, a fração butanólica e a fração aquosa de P. cauliflora, tanto na concentração 1% quanto na obtida pelo CIM, inibiram o crescimento T. rubrum

Investigação sobre deformação neotectônica no lineamento Guapiara, região de Ourinhos, Fartura-SP e Santo Antonio da Platina - PR

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Seleção de micro-organismos com potencial de biodegradação de hidrocarbonetos e biodiesel

The oil and biodiesel are oily substances which, if spilled or thrown out in the environment, can cause serious damages. In this context, bioremediation techniques can be used to the recovering of sites degradated by mineral or vegetable oil, besides them, the biodegradation. However, it is necessary that there are microorganism strains used to degradate the contaminant, previously selected for the fast, efficient and minimum impact remediation. The main objective of this study was to isolate microorganism strains coming from different ecological recesses and verify their potentiality on biodegradating oil and biodiesel. Strains of bacteria, fungi and yeasts were isolated from soils contaminated by hydrocarbons (diesel, gasoline, grease) before, by doing striations on culture plates. On the biodegradation tests, it was used the redox indicator, 2,6-dichlorophenol indophenol (DCPIP), then, after the indicador’s discoloration, the absorbance of the suspension obtained was measured. 46 different microorganism strains were isolated, and the oil, when it was used as a carbon resource, it was degradate easier than the biodiesel. The experiments showed that, in a period, the site impacted by oil spills recovers itself by the biodegradation, in aerobic conditions, by the redox activity.

Avaliação do efeito ambiental nas propriedades mecânicas e viscoelásticas de compósitos híbridos de titânio/fibra de carbono/resina epóxi

Hybrid composites combining metal plates and laminates with continuous fiber reinforced polymer, called fiber-metal (CHMF), have been particularly attractive for aerospace applications, due mainly to their high mechanical strength and stiffness associated with low density. These laminates (CHMF) consist of a sandwich structure consisting of layers of polymer composites and metal plates, stacked alternately. This setting allows you to combine the best mechanical performance of polymer composites reinforced with long fibers, to the high toughness of metals. Environmental effects should always be considered in the design of structural components, because these materials in applications are submitted to the effects of moisture in the atmosphere, the large cyclical variations of temperature around 82 ° C to -56 ° C, and high effort mechanical. The specimens of fibermetal composite were prepared at EMBRAER with titanium plates and laminates of carbon fiber/epoxy resin. This study aims to evaluate the effect of different environmental conditions (water immersion, hygrothermal chamber and thermal shock) of laminate hybrid titanium/carbon fiber/epoxy resin. The effects of conditioning were evaluated by interlaminar shear tests - ILSS, tensile, and vibration free

Investigação sobre deformação neotectônica no lineamento Guapiara, região de Guapiara e Jacupiranga

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Influência da luz LED em culturas de células-tronco mesenquimais in-vitro

Stem cells are defined as cells capable of self-renewal and differentiation into specialized cells when submited to external signalings in the enviroment. Among adult stem cells, mesenchymal cells occupy an important position because they can differentiate into mesodermal cells such as osteoblasts, adipocytes and chondrocytes. Cell therapy consists in the use of mesenchymal stem cells (MSC) in the treatment of degenerative diseases and harmed tissue reconstruction. Due to the longstanding and costly procedure for cultivation of MSC, it was proposed the use of low power light sources, such as light emitting diodes (LED), to optimize these factors. Recent works have shown a series of results from the influence of LED light on biological tissues such as increased rate of cell proliferation, increased RNA, DNA and ATP synthesis rate. The purpose of this study is to compare the biomodulator effect of LED light set at wavelengths 630nm ± 10nm and 805nm ± 10nm on the mesenchymal stem cells proliferation. For this, the mesenchymal stem cells culture adopted the procedure used in the Departament of Animal Reproduction and Veterinary Radiology of the Faculty of Veterinary Medicine and Animal Sciences of Botucatu. MSC were obtained from an adult horse bone marrow, and isolated by density gradient separation, with the FICOLL reagent and by centrifugation. The pellet containing the stem cells was removed and these were placed in low glucose DMEM culture medium, containing 10% fetal calf serum and antibiotics. The material was observed daily by inverted microscopy for monitoring the progression of the cells and subsequently the amount of cells were counted in a Neubauer counting chamber. The amount of MSC was obtained by cell culture seeded in 24 wells culture plate and segregated into three distinct groups: Group 1 was irradiated with wavelength set at 630nm ± 10 nm, Group... (Complete abstract click electronic access below)

Flexão e análise dinâmico-mecânica de compósitos 5HS e NCF com resina epóxi monocomponente produzidos por RTM

In order to study resin distribution and homogeneity of composite laminates manufactured by RTM, it was used CYCOM 890 monolithic toughened epoxy as a matrix with two different configurations of intermediated modulus (IM) carbon fibers: Satin Weave (5HS) and non crimp fabric (NCF). The injection parameters were defined based on Thermo Gravimetric Analysis (TG), Differential Scanning Calorimetry (DSC) and rheological analysis. After processing the material, the resin/fiber impregnation was studied using ultrasonic test, Thermo Gravimetric Analysis, Differential Scanning Calorimetry, Dynamic Mechanical Analysis (DMA) and flexural tests. Therefore, it was able to observe an internal residual stress during the cooling process in both laminates, higher in the composite using NCF fabric due to the lack of symmetry, although a good proportion of fiber/matrix has been verified by the lower values of flexural modulus deviation. The DMA enabled the visualization of glass transition and its association with the inter and intra molecular interaction and movement, in which the NCF composite presented better permeability due to the lowest temperature of glass transition, when compared to the Satin Weave composite

Efeito de atmosfera controlada no desenvolvimento de Monilinia fructicola e na qualidade pós-colheita de pêssegos 'Aurora-1'

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Chauliocheilos saxatilis, a new genus and species of Hypoptopomatinae from rio Jequitinhonha basin, with a unique labial appendix (Teleostei: Loricariidae)

Chauliocheilos saxatilis, new genus and species, is described from headwater streams of the rio Itamarandiba, upper rio Jequitinhonha basin, southeastern Brazil. The new genus is diagnosed from all other Loricariidae members by having a unique labial appendix at laterodorsal portion of lower lip, associated to the proximal region of insertion of the maxillary barbel. From all Hypoptopomatinae genera, Chauliocheilos can be distinguished by having two additional series of lateral plates, one between the dorsal and mid-dorsal series, and the other between the mid-ventral and ventral series. In addition, the great number of lateral plates, the absence of the iris operculum, and the posterior dorsal-fin insertion contacting the neural spine of eighth vertebra, are other useful features to recognize the genus. The phylogenetic position of Chauliocheilos among the Hypoptopomatinae, as well as the morphology and possible functions of the labial appendix, are discussed.

Distribuição espacial dos ninhos de Athene cunicularia (coruja-buraqueira) e dinâmica de sua utilização

A coruja-buraqueira (Athene cunicularia) nidififica no chão e, com frequência, ocorre em ambientes bastante urbanizados como no campus universitário da UNESP em Botucatu, SP região centro-oeste paulista. Os objetivos do estudo foram descrever as características físicas das escavações, distribuição espacial, formas de utilização e avaliar que elementos presentes nas áreas urbanas são importantes para a seleção dos sítios de nidificação. Foram monitorados 6 grupos familiares desde 2011, cuja população e o número de ninhos foram contabilizados e a localização, georeferenciados. Os dados comportamentais foram registrados em caderno de campo, fotografados e filmados. A densidade populacional no câmpus foi de 0,03 indivíduos por Km² com os sítios de nidificação vizinhos tendo a distância mínima de 140,0 metros e máxima de 378 metros. As tocas apresentaram 50,6± 5,6cm de diâmetro, a maioria construída em terreno com declive. As corujas selecionaram sítios de nidificação em áreas abertas e gramadas contendo no entorno poleiros naturais (árvores, arvoretas, arbustos) e artificiais (placas, postes, peitoral de janelas, etc) e próximos a bueiros e postes com iluminação artificial. Estes dois últimos constituíram atrativos paras as suas presas (artrópodes e roedores) e a análise de ergagrópilas revelou a ocorrência de 5 grupos taxonômicos de artrópodes: 65,4% de Coleóptera, 27,2% de Orthoptera, 4,6% de Blatodea, 1,4% de Aranae, 0,9% de Hymenoptra e 0,4% de Mantodea. Os resultados obtidos mostraram que as corujas-buraqueiras levaram em consideração características como oferta abundante de alimento, principalmente, de artrópodes que se concentravam nas área iluminadas e nos bueiros. A estabilidade temporal dos sítios de nidificação nestes três anos de monitoramento acompanhada de sucesso reprodutivo de 50% revela que a despeito do intenso tráfego de veículos e transeuntes no campus, o ambiente ...

Crescimento de apatita na superfície da liga Ti-25Ta empregando dois tipos de tratamento de superfície: biomimético e deposição de polímero por eletrofiação

Titanium and its alloys has been widely used as materials for metallic biomaterials implants are usually employed to restore the hard tissue function, being used for artificial joints and bones, synthetic plates, crowns, dental implants and screws . Objective of this work was the surface modification of Ti-alloy 25Ta from biomimetic surface treatment of employment and deposition of polymer by electrospinning. The league was obtained from the fusion of the pure elements in the arc furnace with controlled atmosphere. The ingots were subjected to heat treatment, cold forged and sectioned discs with 13 mm diameter and 3 mm thick. Two surface treatments was evaluated, biomimetic and electrospinning with PCL fiber. The biomimetic treatment was performed involving alkaline treatment for three molarities 1.5M, 3M and 5M with immersion in SBF. The electrospinning was performed using PCL polymer alloy surface after the alkali treatment Ti25Ta 1M. For this group the polymer coated surfaces were immersed in calcium phosphate containing solution for immobilization of apatite. The results were compared with previous studies using surface treatment group to verify hydroxyapatite formation on the sample surface and it is concluded that the best condition is biomimetic treatment with 5M alkali treatment and heat treatment at 80 ° C for 72 hours

Biocompatibilidade da terapia fotodinâmica: estudo in vitro e in vivo

Pós-graduação em Ciência Odontólogica - FOA

Análise comparativa da ação antimicrobiana dos cimentos endodônticos Acroseal, Sealapex e AH plus pós presa em biofilme de enterococcus faecalis

Pós-graduação em Ciência Odontólogica - FOA

Dispositivo microfluídico de borracha natural (LAB-ON-A-CHIP)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Expressão de genes relacionados à remodelação óssea na fase inicial da reabsorção do rebordo residual em mandíbulas humanas

Pós-graduação em Biopatologia Bucal - ICT