Experimental investigation of 3D shock / boundary layer interaction control in transonic flows

A novel supersonic wind tunnel setup is proposed to enable the investigation of control on a normal shock wave. Previous experimental arrangements were found to suffer from shock instability. Wind tunnel tests with and without control have confirmed the capability of the new setup to stabilise a shock structure at a target position without changing the nature of the shock wave / boundary layer interaction flow at M∞ = 1.3 and M ∞ = 1.5. Flow visualisation and pressure measurements with the new setup have revealed detailed characteristics of shock wave / boundary layer interactions and a λ-shock structure as well as benefits of control in total drag reduction in the presence of 3D bump control.

Probiotics and nutrient supplement in artificial feed of gold fish (Carassius auratus)

The efficacy of three feeds incorporated with different probiotics -Lactobacil, Vizylac and Cyfolac as nutrient supplement was evaluated in an ornamental fish, Carassius auratus (Linn.). The basal diet (40% protein) was prepared and the probiotics were incorporated at different levels viz. Lactobacil at 8x10 super(7)/100g and 12x10 super(7)/100g, Vizylac at 8x10 super(7)/100g and 12x10 super(7)/100g and Cyfolac at 12x10 super(7)/100g. Feeding trial was conducted for a period of 4 weeks. At the end of the experiment, bio-growth parameters and proximate composition of the fishes were studied. The growth, survival and protein content were improved in all the probiotic fed fishes compared to control. The maximum growth (0.74 g) and survival (85%) were observed in fishes fed with Lactobacil at 12x10 super(7)/100g. It emphasizes that supplementation of feed with probiotics has a positive impact on the growth, survival and the body composition of goldfish.

Laser-vapour interaction in high-power cw Nd:YAG laser welding

During high-power cw Nd:YAG laser welding a vapour plume is formed containing vaporised material ejected from the keyhole. Spectroscopic studies of the vapour emission have demonstrated that the vapour can be considered as thermally excited gas with a stable temperature (less than 3000K), not as partially ionised plasma. In this paper, a review of temperatures in the vapour plume is presented. The difficulties in the analysis of the plume spectroscopic results are reviewed and explained. It is shown that particles present in the vapour interact with the laser beam, attenuating it. The attenuation can be calculated with Mie scattering theory, however, vaporisation and particle formation also both play a major role in this process. The laser beam is also defocused due to the scattering part of the attenuation mechanism, changing the energy density in the laser beam. Methods for mitigating the effects of the laser beam-vapour interaction, using control gases, are presented together with their advantages and disadvantages. This 'plume control' has two complementary roles: firstly, the gas must divert the vapour plume from out of the laser beam path, preventing the attenuation. Secondly, the gas has to stabilise the front wall of the keyhole, to prevent porosity formation.

Species interaction between carp species in polyculture system

A three months experiment was conducted to study the species interactions of two carp species in polyculture system under supplemental feeding. Four species of fishes such as silver carp (Hypophthalmichthys molitrix), mrigal (Cirrhina cirrhosus), catla (Catla catla) and common carp (Cyprinus carpio) were cultured in four different combinations each containing two species. The combination of silver carp and mrigal in treatment 1, and silver carp and common carp in treatment 2 resulted better growth and production than other two treatments of different combinations of catla and common carp, and catla and mrigal.

Effects of iso-nitrogenous fertilizers as nutrient sources on carp polyculture in Bangladesh

A 120-day long experiment was conducted to find out the effects of urea plus triple super phosphate (UT), cow manure (CM) and poultry manure (PM) having iso-nil:rogen content on pond productivity and fish yield. Three fertilizer treatments, with three replicates each, were randomly assigned into nine earthen ponds of 100 m2 each. The stocking fish were rohu (Labeo ruhita), catla ( Catla catla) and mrigal ( Cirrhinus mrigala) in each treatment pond at the rate of 10000/ha with the ratio of 1:1:1. All ponds were fertilized fortnightly at the rate of 125 kg/ha urea plus 100 kg TSP/ha, 7000 kg/ha cow manure and 3500 kg/ha poultry manure for the treatment of UT, CM and PM, respectively, having an iso-nitrogen content of 56 kg in each. Though the physicochemical water quality parameters were more or less similar in all treatment ponds, the chlorophyll-a content and abundance of total plankton were significantly higher (P < 0.05) in the ponds receiving the treatment PM. Final growth as well as per unit production of fish was significantly higher (p

Computational fluid-structure interaction methods for simulation of inflatable aerodynamic decelerators

Inflatable aerodynamic decelerators have potential advantages for planetary re-entry in robotic and human exploration missions. It is theorized that volume-mass characteristics of these decelerators are superior to those of common supersonic/subsonic parachutes and after deployment they may suffer no instabilities at high Mach numbers. A high fidelity computational fluid-structure interaction model is employed to investigate the behavior of tension cone inflatable aeroshells at supersonic speeds up to Mach 2.0. The computational framework targets the large displacements regime encountered during the inflation of the decelerator using fast level set techniques to incorporate boundary conditions of the moving structure. The preliminary results indicate large but steady aeroshell displacement with rich dynamics, including buckling of the inflatable torus that maintains the decelerator open under normal operational conditions, owing to interactions with the turbulent wake. Copyright © 2009 by the American Institute of Aeronautics and Astronautics, Inc.

Assessment of CFD models for shock boundary-layer interaction

A workshop on the computational fluid dynamics (CFD) prediction of shock boundary-layer interactions (SBLIs) was held at the 48th AIAA Aerospace Sciences Meeting. As part of the workshop numerous CFD analysts submitted solutions to four experimentally measured SBLIs. This paper describes the assessment of the CFD predictions. The assessment includes an uncertainty analysis of the experimental data, the definition of an error metric and the application of that metric to the CFD solutions. The CFD solutions provided very similar levels of error and in general it was difficult to discern clear trends in the data. For the Reynolds Averaged Navier-Stokes methods the choice of turbulence model appeared to be the largest factor in solution accuracy. Large-eddy simulation methods produced error levels similar to RANS methods but provided superior predictions of normal stresses.

Fluid-structure interaction simulation of an inflatable aerodynamic tension-cone decelerator

Inflatable aerodynamic decelerators have potential advantages for planetary re-entry in robotic and human exploration missions. In this paper, we focus on an inflatable tension cone design that has potential advantages over other geometries. A computational fluid-structure interaction model of a tension cone is employed to investigate the behavior of the inflatable aeroshell at supersonic speeds for conditions matching recent experimental results. A parametric study is carried out to investigate the deflections of the tension cone as a function of inflation pressure of the torus at a Mach of 2.5. Comparison of the behavior of the structure, amplitude of deformations, and determined loads are reported. © 2010 by the American Institute of Aeronautics and Astronautics, Inc.

Workspace comparisons of setup configurations for human-robot interaction

In virtual assembly verification or remote maintenance tasks, bimanual haptic interfaces play a crucial role in successful task completion. This paper proposes a method for objectively comparing how well a haptic interface covers the reachable workspace of human arms. Two system configurations are analyzed for a recently introduced haptic device that is based on two DLR-KUKA light weight robots: the standard configuration, where the device is opposite the human operator, and the ergonomic configuration, where the haptic device is mounted behind the human operator. The human operator directly controls the robotic arms using handles. The analysis is performed using a representation of the robot arm workspace. The merits of restricting the comparisons to the most significant regions of the human workspace are discussed. Using this method, a greater workspace correspondence for the ergonomic configuration was shown. ©2010 IEEE.

Centrifuge modelling of pile-soil interaction in liquefiable slopes

Piles passing through sloping liquefiable deposits are prone to lateral loading if these deposits liquefy and flow during earthquakes. These lateral loads caused by the relative soil-pile movement will induce bending in the piles and may result in failure of the piles or excessive pile-head displacement. Whilst the weak nature of the flowing liquefied soil would suggest that only small loads would be exerted on the piles, it is known from case histories that piles do fail owing to the influence of laterally spreading soils. It will be shown, based on dynamic centrifuge test data, that dilatant behaviour of soil close to the pile is the major cause of these considerable transient lateral loads which are transferred to the pile. This paper reports the results of geotechnical centrifuge tests in which models of gently sloping liquefiable sand with pile foundations passing through them were subjected to earthquake excitation. The soil close to the pile was instrumented with pore-pressure transducers and contact stress cells in order to monitor the interaction between soil and pile and to track the soil stress state both upslope and downslope of the pile. The presence of instrumentation measuring pore-pressure and lateral stress close to the pile in the research described in this paper gives the opportunity to better study the soil stress state close to the pile and to compare the loads measured as being applied to the piles by the laterally spreading soils with those suggested by the JRA design code. This test data shows that lateral stresses much greater than one might expect from calculations based on the residual strength of liquefied soil may be applied to piles in flowing liquefied slopes owing to the dilative behaviour of the liquefied soil. It is shown at least for the particular geometry studied that the current JRA design code can be un-conservative by a factor of three for these dilation-affected transient lateral loads.

Effects of iso-nitrogenous and iso-phosphorus fertilizers as nutrient sources on carp polyculture in Bangladesh

A 120 day long experiment was conducted to find out the effects of cow manure with urea and triple super phosphate (CUT), poultry manure with urea and triple super phosphate (PUT) and cow manure with poultry manure (CP) having similar quantities of nitrogen and phosphorus on pond productivity and fish yield. The stocking fish were rohu (Labeo rohita), catla ( Catla catla) and mrigal ( Cirrhinus mrigala) in each treatment pond at the rate of 10000/ha. All ponds were fertilized fortnightly at the rate of 4000 kg/ha cow manure with 62 kg/ha urea and 65 kg/ha TSP, 2700 kg/ha poultry manure with 62 kg/ha urea and 16 kg/ha TSP, and 4000kg/ha cow manure with 2700 kg/ha poultry manure for the treatment CUT, PUT and CP respectively. Each treatment contained an iso-nitrogen and iso-phosphorus of 56 kg and 46 kg respectively. Though the physico-chemical parameters were more or less similar in all ponds, the chlorophyll-a content and abundance of total plankton were significantly higher (P< 0.05) in the ponds receiving the fertilizer treatment of PUT than those of other treatments. Final growth as well as per unit production of fish of treatment PUT (1773 kg/ha) was significantly higher (P< 0.05) than that of treatment CP (1528 kg/ha) followed by that of treatment CUT (1336 kg/ha). The over all results showed that poultry manure with urea and triple super phosphate proved to be superior to cow manure with urea and triple super phosphate, and poultry manure with cow manure, even when nitrogen and phosphorus content was similar, in carp polyculture system under prevailing conditions.

Growth performance and nutrient utilization of catfish Clarias gariepinus fed varying inclusion level of fermented unsieved yellow maize

This study was conducted using 150 fish of Clarias gariepinus to investigate the growth performance and nutrient utilization of Clarias gariepinus fed five treatment diets containing varying inclusion level of fermented unsieved maize. The diets were grouped into CT, T1, T2, T3, and T4 with inclusion levels of 25%, 50%, 75%, and 100% of fermented unsieved maize respectively. Highest weight gain was recorded in T4 with value of 10.24 and lowest weight was recorded in CT with 9.17. High FCR were observed in T2 with value of 0.70 and lower value was observed in T4 with value of 0.62. While, T2, T3, and T4 have highest survival rates with values of 90% in each treatment CT and T1 recorded 80% and 70% respectively. There was a significant (p< 0.05) difference between the food conversion ratios treatment T4 with the best value and other treatments. There was a significant (p< 0.05) difference between the levels of fermented unsieved maize inclusion and the specific growth rate of the experimental fish. The highest value of protein level and feed efficiency were observed in T4 at significant difference level (p< 0.05) than other treatments. It was concluded that fermentation of maize in fish feed has positive effects on the nutritional value of the feed. It is recommend that fermented maize can replace raw maize in fish feed diet for growth performance. KEYWORDS: Fermentation, yellow maize, Clarias gariepinus, Fish, Feed.

Growth performance and nutrient utilization of catfish Clarias gariepinus fed varying inclusion level of fermented unsieved yellow maize

This study was conducted using 150 fish of Clarias gariepinus to investigate the growth performance and nutrient utilization of Clarias gariepinus fed five treatment diets containing varying inclusion level of fermented unsieved maize. The diets were grouped into CT, T1, T2, T3, and T4 with inclusion levels of 25%, 50%, 75%, and 100% of fermented unsieved maize respectively. Highest weight gain was recorded in T4 with value of 10.24 and lowest weight was recorded in CT with 9.17. High FCR were observed in T2 with value of 0.70 and lower value was observed in T4 with value of 0.62. While, T2, T3, and T4 have highest survival rates with values of 90% in each treatment CT and T1 recorded 80% and 70% respectively. There was a significant (p< 0.05) difference between the food conversion ratios treatment T4 with the best value and other treatments. There was a significant (p< 0.05) difference between the levels of fermented unsieved maize inclusion and the specific growth rate of the experimental fish. The highest value of protein level and feed efficiency were observed in T4 at significant difference level (p< 0.05) than other treatments. It was concluded that fermentation of maize in fish feed has positive effects on the nutritional value of the feed. It is recommend that fermented maize can replace raw maize in fish feed diet for growth performance.

A survey of pest (Dermestes maculatus) infestation of dried preserved Clarias gariepinus: its effect on nutrient quantity and quality

Studies on the nutrient composition of smoked-dried Clarias gariepinus were carried out, to assess the effects of pest infestation on the dried catfish from two different market (Abakpa and Kpirikpiri market) area in Abakaliki Metropolis, Ebonyi State, Nigeria. Fish samples from the two markets where kept for pest to infest it and it were taken to Biochemistry Laboratory of Food Science and Technology in Ebonyi State University to assess the damage of pest on dried catfish using standard methods. There was a significant different among the mean weight of fish from the two markets (Abakpa and kpirikpiri; 19.13kg and 18.98kg respectively) compared with the mean weight of the control 20.09kg. There was a variation in the proximate composition of the fishes from the two markets compared with the control, the decreases of the proximate composition are: crude protein from 60.07% to 40.27%; fat from 8.35% to 5.90%; moisture content from 11.67% to 10.67; fiber from 12.93 to 11.93; ash from 4.02% to 3.54% and carbohydrate 12.67% to 5.89%. The longer the storage periods of the infested smoked fish the more the tissue was degraded. Proper handling and storage of dried catfish are required to prolong the shelf life and nutrient content of dried catfish.

Nutrient profile of pond water in north-eastern state of Tripura and impact of water acidity on aquaculture productivity

Physicochemical parameters of 31 fish pond water samples of Tripura were studied to ascertain the nutrient profile of acidic soil zone and the impact of water acidity towards aquaculture productivity. The pH was acidic (mean 6.63±0.44) with high Fe (mean1.04±0.40 mglˉ¹) and AI (mean 2.67±2.41 mglˉ¹) contents. These were mostly responsible for pond water acidity and poor productivity with low nitrogen, phosphate and total alkalinity. The study also showed strong negative relationship between water pH and redox potential (R²=0.5251). However, pH was positively significant with electrical conductivity. The roles of redox potential and electrical conductivity in water acidity were found highly important. Available calcium content was also found low (mean 2.91±2.96 mglˉ¹). Elevating level of pH of pond water could be the possible management practices in acidic water so that such unproductive water might be productive enough with higher phosphate and nitrogen levels for better biological production.