Rafael Moneo: la complessità del vuoto. Dalle matrici formali dell'opera di Oteiza e Chillida

The experience of void, essential to the production of forms and to make use them, can be considered as the base of the activities that attend to the formative processes. If void and matter constitutes the basic substances of architecture. Their role in the definition of form, the symbolic value and the constructive methods of it defines the quality of the space. This job inquires the character of space in the architecture of Moneo interpreting the meaning of the void in the Basque culture through the reading of the form matrices in the work of Jorge Oteiza and Eduardo Chillida. In the tie with the Basque culture a reading key is characterized by concurring to put in relation some of the theoretical principles expressed by Moneo on the relationship between place and time, in an unique and specific vision of the space. In the analysis of the process that determines the genesis of the architecture of Moneo emerges a trajectory whose direction is constructed on two pivos: on the one hand architecture like instrument of appropriation of the place, gushed from an acquaintance process who leans itself to the reading of the relations that define the place and of the resonances through which measuring it, on the other hand the architecture whose character is able to represent and to extend the time in which he is conceived, through the autonomy that is conferred to them from values. Following the trace characterized from this hypothesis, that is supported on the theories elaborated from Moneo, surveying deepens the reading of the principles that construct the sculptural work of Oteiza and Chillida, features from a search around the topic of the void and to its expression through the form. It is instrumental to the definition of a specific area that concurs to interpret the character of the space subtended to a vision of the place and the time, affine to the sensibility of Moneo and in some way not stranger to its cultural formation. The years of the academic formation, during which Moneo enters in contact with the Basque artistic culture, seem to be an important period in the birth of that knowledge that will leads him to the formulation of theories tied to the relationship between time, place and architecture. The values expressed through the experimental work of Oteiza and Chillida during years '50 are valid bases to the understanding of such relationships. In tracing a profile of the figures of Oteiza and Chillida, without the pretension that it is exhaustive for the reading of the complex historical period in which they are placed, but with the needs to put the work in a context, I want to be evidenced the important role carried out from the two artists from the Basque cultural area within which Moneo moves its first steps. The tie that approaches Moneo to the Basque culture following the personal trajectory of the formative experience interlaces to that one of important figures of the art and the Spanish architecture. One of the more meaningful relationships is born just during the years of his academic formation, from 1958 to the 1961, when he works like student in the professional office of the architect Francisco Sáenz de Oiza, who was teaching architectural design at the ETSAM. In these years many figures of Basque artists alternated at the professional office of Oiza that enjoys the important support of the manufacturer and maecenas Juan Huarte Beaumont, introduced to he from Oteiza. The tie between Huarte and Oteiza is solid and continuous in the years and it realizes in a contribution to many of the initiatives that makes of Oteiza a forwarder of the Basque culture. In the four years of collaboration with Oiza, Moneo has the opportunity to keep in contact with an atmosphere permeated by a constant search in the field of the plastic art and with figures directly connected to such atmosphere. It’s of a period of great intensity as in the production like in the promotion of the Basque art. The collective “Blanco y Negro”, than is held in 1959 at the Galería Darro to Madrid, is only one of the many times of an exhibition of the work of Oteiza and Chillida. The end of the Fifties is a period of international acknowledgment for Chillida that for Oteiza. The decade of the Fifties consecrates the hypotheses of a mythical past of the Basque people through the spread of the studies carried out in the antecedent years. The archaeological discoveries that join to a context already rich of signs of the prehistoric era, consolidate the knowledge of a strong cultural identity. Oteiza, like Chillida and other contemporary artists, believe in a cosmogonist conception belonging to the Basques, connected to their matriarchal mythological past. The void in its meaning of absence, in the Basque culture, thus as in various archaic and oriental religions, is equivalent to the spiritual fullness as essential condition to the revealing of essence. Retracing the archaic origins of the Basque culture emerges the deep meaning that the void assumes as key element in the religious interpretation of the passage from the life to the death. The symbology becomes rich of meaningful characters who derive from the fact that it is a chthonic cult. A representation of earth like place in which divine manifest itself but also like connection between divine and human, and this manipulation of the matter of which the earth it is composed is the tangible projection of the continuous search of the man towards God. The search of equilibrium between empty and full, that characterizes also the development of the form in architecture, in the Basque culture assumes therefore a peculiar value that returns like constant in great part of the plastic expressions, than in this context seem to be privileged regarding the other expressive forms. Oteiza and Chillida develop two original points of view in the representation of the void through the form. Both use of rigorous systems of rules sensitive to the physics principles and the characters of the matter. The last aim of the Oteiza’s construction is the void like limit of the knowledge, like border between known and unknown. It doesn’t means to reduce the sculptural object to an only allusive dimension because the void as physical and spiritual power is an active void, that possesses that value able to reveal the being through the trace of un-being. The void in its transcendental manifestation acts at the same time from universal and from particular, like in the atomic structure of the matter, in which on one side it constitutes the inner structure of every atom and on the other one it is necessary condition to the interaction between all the atoms. The void can be seen therefore as the action field that concurs the relations between the forms but is also the necessary condition to the same existence of the form. In the construction of Chillida the void represents that counterpart structuring the matter, inborn in it, the element in absence of which wouldn’t be variations neither distinctive characters to define the phenomenal variety of the world. The physics laws become the subject of the sculptural representation, the void are the instrument that concurs to catch up the equilibrium. Chillida dedicate himself to experience the space through the senses, to perceive of the qualities, to tell the physics laws which forge the matter in the form and the form arranges the places. From the artistic experience of the two sculptors they can be transposed, to the architectonic work of Moneo, those matrices on which they have constructed their original lyric expressions, where the void is absolute protagonist. An ambit is defined thus within which the matrices form them drafts from the work of Oteiza and Chillida can be traced in the definition of the process of birth and construction of the architecture of Moneo, but also in the relation that the architecture establishes with the place and in the time. The void becomes instrument to read the space constructed in its relationships that determine the proportions, rhythms, and relations. In this way the void concurs to interpret the architectonic space and to read the value of it, the quality of the spaces constructing it. This because it’s like an instrument of the composition, whose role is to maintain to the separation between the elements putting in evidence the field of relations. The void is that instrument that serves to characterize the elements that are with in the composition, related between each other, but distinguished. The meaning of the void therefore pushes the interpretation of the architectonic composition on the game of the relations between the elements that, independent and distinguished, strengthen themselves in their identity. On the one hand if void, as measurable reality, concurs all the dimensional changes quantifying the relationships between the parts, on the other hand its dialectic connotation concurs to search the equilibrium that regulated such variations. Equilibrium that therefore does not represent an obtained state applying criteria setting up from arbitrary rules but that depends from the intimate nature of the matter and its embodiment in the form. The production of a form, or a formal system that can be finalized to the construction of a building, is indissolubly tied to the technique that is based on the acquaintance of the formal vocation of the matter, and what it also can representing, meaning, expresses itself in characterizing the site. For Moneo, in fact, the space defined from the architecture is above all a site, because the essence of the site is based on the construction. When Moneo speaks about “birth of the idea of plan” like essential moment in the construction process of the architecture, it refers to a process whose complexity cannot be born other than from a deepened acquaintance of the site that leads to the comprehension of its specificity. Specificity arise from the infinite sum of relations, than for Moneo is the story of the oneness of a site, of its history, of the cultural identity and of the dimensional characters that that they are tied to it beyond that to the physical characteristics of the site. This vision is leaned to a solid made physical structure of perceptions, of distances, guideline and references that then make that the process is first of all acquaintance, appropriation. Appropriation that however does not happen for directed consequence because does not exist a relationship of cause and effect between place and architecture, thus as an univocal and exclusive way does not exist to arrive to a representation of an idea. An approach that, through the construction of the place where the architecture acquires its being, searches an expression of its sense of the truth. The proposal of a distinction for areas like space, matter, spirit and time, answering to the issues that scan the topics of the planning search of Moneo, concurs a more immediate reading of the systems subtended to the composition principles, through which is related the recurrent architectonic elements in its planning dictionary. From the dialectic between the opposites that is expressed in the duality of the form, through the definition of a complex element that can mediate between inside and outside as a real system of exchange, Moneo experiences the form development of the building deepening the relations that the volume establishes in the site. From time to time the invention of a system used to answer to the needs of the program and to resolve the dual character of the construction in an only gesture, involves a deep acquaintance of the professional practice. The technical aspect is the essential support to which the construction of the system is indissolubly tied. What therefore arouses interest is the search of the criteria and the way to construct that can reveal essential aspects of the being of the things. The constructive process demands, in fact, the acquaintance of the formative properties of the matter. Property from which the reflections gush on the relations that can be born around the architecture through the resonance produced from the forms. The void, in fact, through the form is in a position to constructing the site establishing a reciprocity relation. A reciprocity that is determined in the game between empty and full and of the forms between each other, regarding around, but also with regard to the subjective experience. The construction of a background used to amplify what is arranged on it and to clearly show the relations between the parts and at the same time able to tie itself with around opening the space of the vision, is a system that in the architecture of Moneo has one of its more effective applications in the use of the platform used like architectonic element. The spiritual force of this architectonic gesture is in the ability to define a place whose projecting intention is perceived and shared with who experience and has lived like some instrument to contact the cosmic forces, in a delicate process that lead to the equilibrium with them, but in completely physical way. The principles subtended to the construction of the form taken from the study of the void and the relations that it concurs, lead to express human values in the construction of the site. The validity of these principles however is tested from the time. The time is what Moneo considers as filter that every architecture is subordinate to and the survival of architecture, or any of its formal characters, reveals them the validity of the principles that have determined it. It manifests thus, in the tie between the spatial and spiritual dimension, between the material and the worldly dimension, the state of necessity that leads, in the construction of the architecture, to establish a contact with the forces of the universe and the intimate world, through a process that translate that necessity in elaboration of a formal system.

Biomass Gasification - Process analysis and dimensioning aspects for downdraft units and gas cleaning lines

In such territories where food production is mostly scattered in several small / medium size or even domestic farms, a lot of heterogeneous residues are produced yearly, since farmers usually carry out different activities in their properties. The amount and composition of farm residues, therefore, widely change during year, according to the single production process periodically achieved. Coupling high efficiency micro-cogeneration energy units with easy handling biomass conversion equipments, suitable to treat different materials, would provide many important advantages to the farmers and to the community as well, so that the increase in feedstock flexibility of gasification units is nowadays seen as a further paramount step towards their wide spreading in rural areas and as a real necessity for their utilization at small scale. Two main research topics were thought to be of main concern at this purpose, and they were therefore discussed in this work: the investigation of fuels properties impact on gasification process development and the technical feasibility of small scale gasification units integration with cogeneration systems. According to these two main aspects, the present work was thus divided in two main parts. The first one is focused on the biomass gasification process, that was investigated in its theoretical aspects and then analytically modelled in order to simulate thermo-chemical conversion of different biomass fuels, such as wood (park waste wood and softwood), wheat straw, sewage sludge and refuse derived fuels. The main idea is to correlate the results of reactor design procedures with the physical properties of biomasses and the corresponding working conditions of gasifiers (temperature profile, above all), in order to point out the main differences which prevent the use of the same conversion unit for different materials. At this scope, a gasification kinetic free model was initially developed in Excel sheets, considering different values of air to biomass ratio and the downdraft gasification technology as particular examined application. The differences in syngas production and working conditions (process temperatures, above all) among the considered fuels were tried to be connected to some biomass properties, such elementary composition, ash and water contents. The novelty of this analytical approach was the use of kinetic constants ratio in order to determine oxygen distribution among the different oxidation reactions (regarding volatile matter only) while equilibrium of water gas shift reaction was considered in gasification zone, by which the energy and mass balances involved in the process algorithm were linked together, as well. Moreover, the main advantage of this analytical tool is the easiness by which the input data corresponding to the particular biomass materials can be inserted into the model, so that a rapid evaluation on their own thermo-chemical conversion properties is possible to be obtained, mainly based on their chemical composition A good conformity of the model results with the other literature and experimental data was detected for almost all the considered materials (except for refuse derived fuels, because of their unfitting chemical composition with the model assumptions). Successively, a dimensioning procedure for open core downdraft gasifiers was set up, by the analysis on the fundamental thermo-physical and thermo-chemical mechanisms which are supposed to regulate the main solid conversion steps involved in the gasification process. Gasification units were schematically subdivided in four reaction zones, respectively corresponding to biomass heating, solids drying, pyrolysis and char gasification processes, and the time required for the full development of each of these steps was correlated to the kinetics rates (for pyrolysis and char gasification processes only) and to the heat and mass transfer phenomena from gas to solid phase. On the basis of this analysis and according to the kinetic free model results and biomass physical properties (particles size, above all) it was achieved that for all the considered materials char gasification step is kinetically limited and therefore temperature is the main working parameter controlling this step. Solids drying is mainly regulated by heat transfer from bulk gas to the inner layers of particles and the corresponding time especially depends on particle size. Biomass heating is almost totally achieved by the radiative heat transfer from the hot walls of reactor to the bed of material. For pyrolysis, instead, working temperature, particles size and the same nature of biomass (through its own pyrolysis heat) have all comparable weights on the process development, so that the corresponding time can be differently depending on one of these factors according to the particular fuel is gasified and the particular conditions are established inside the gasifier. The same analysis also led to the estimation of reaction zone volumes for each biomass fuel, so as a comparison among the dimensions of the differently fed gasification units was finally accomplished. Each biomass material showed a different volumes distribution, so that any dimensioned gasification unit does not seem to be suitable for more than one biomass species. Nevertheless, since reactors diameters were found out quite similar for all the examined materials, it could be envisaged to design a single units for all of them by adopting the largest diameter and by combining together the maximum heights of each reaction zone, as they were calculated for the different biomasses. A total height of gasifier as around 2400mm would be obtained in this case. Besides, by arranging air injecting nozzles at different levels along the reactor, gasification zone could be properly set up according to the particular material is in turn gasified. Finally, since gasification and pyrolysis times were found to considerably change according to even short temperature variations, it could be also envisaged to regulate air feeding rate for each gasified material (which process temperatures depend on), so as the available reactor volumes would be suitable for the complete development of solid conversion in each case, without even changing fluid dynamics behaviour of the unit as well as air/biomass ratio in noticeable measure. The second part of this work dealt with the gas cleaning systems to be adopted downstream the gasifiers in order to run high efficiency CHP units (i.e. internal engines and micro-turbines). Especially in the case multi–fuel gasifiers are assumed to be used, weightier gas cleaning lines need to be envisaged in order to reach the standard gas quality degree required to fuel cogeneration units. Indeed, as the more heterogeneous feed to the gasification unit, several contaminant species can simultaneously be present in the exit gas stream and, as a consequence, suitable gas cleaning systems have to be designed. In this work, an overall study on gas cleaning lines assessment is carried out. Differently from the other research efforts carried out in the same field, the main scope is to define general arrangements for gas cleaning lines suitable to remove several contaminants from the gas stream, independently on the feedstock material and the energy plant size The gas contaminant species taken into account in this analysis were: particulate, tars, sulphur (in H2S form), alkali metals, nitrogen (in NH3 form) and acid gases (in HCl form). For each of these species, alternative cleaning devices were designed according to three different plant sizes, respectively corresponding with 8Nm3/h, 125Nm3/h and 350Nm3/h gas flows. Their performances were examined on the basis of their optimal working conditions (efficiency, temperature and pressure drops, above all) and their own consumption of energy and materials. Successively, the designed units were combined together in different overall gas cleaning line arrangements, paths, by following some technical constraints which were mainly determined from the same performance analysis on the cleaning units and from the presumable synergic effects by contaminants on the right working of some of them (filters clogging, catalysts deactivation, etc.). One of the main issues to be stated in paths design accomplishment was the tars removal from the gas stream, preventing filters plugging and/or line pipes clogging At this scope, a catalytic tars cracking unit was envisaged as the only solution to be adopted, and, therefore, a catalytic material which is able to work at relatively low temperatures was chosen. Nevertheless, a rapid drop in tars cracking efficiency was also estimated for this same material, so that an high frequency of catalysts regeneration and a consequent relevant air consumption for this operation were calculated in all of the cases. Other difficulties had to be overcome in the abatement of alkali metals, which condense at temperatures lower than tars, but they also need to be removed in the first sections of gas cleaning line in order to avoid corrosion of materials. In this case a dry scrubber technology was envisaged, by using the same fine particles filter units and by choosing for them corrosion resistant materials, like ceramic ones. Besides these two solutions which seem to be unavoidable in gas cleaning line design, high temperature gas cleaning lines were not possible to be achieved for the two larger plant sizes, as well. Indeed, as the use of temperature control devices was precluded in the adopted design procedure, ammonia partial oxidation units (as the only considered methods for the abatement of ammonia at high temperature) were not suitable for the large scale units, because of the high increase of reactors temperature by the exothermic reactions involved in the process. In spite of these limitations, yet, overall arrangements for each considered plant size were finally designed, so that the possibility to clean the gas up to the required standard degree was technically demonstrated, even in the case several contaminants are simultaneously present in the gas stream. Moreover, all the possible paths defined for the different plant sizes were compared each others on the basis of some defined operational parameters, among which total pressure drops, total energy losses, number of units and secondary materials consumption. On the basis of this analysis, dry gas cleaning methods proved preferable to the ones including water scrubber technology in al of the cases, especially because of the high water consumption provided by water scrubber units in ammonia adsorption process. This result is yet connected to the possibility to use activated carbon units for ammonia removal and Nahcolite adsorber for chloride acid. The very high efficiency of this latter material is also remarkable. Finally, as an estimation of the overall energy loss pertaining the gas cleaning process, the total enthalpy losses estimated for the three plant sizes were compared with the respective gas streams energy contents, these latter obtained on the basis of low heating value of gas only. This overall study on gas cleaning systems is thus proposed as an analytical tool by which different gas cleaning line configurations can be evaluated, according to the particular practical application they are adopted for and the size of cogeneration unit they are connected to.

Isotope geochemical and geochronologic studies of basement units in the Central Western Carpathians (Slovakia)

In dieser Arbeit werden geochronologische und isotopen-geochemische Daten zur Entwicklung der Zentralen Westlichen Karpathen präsentiert. Die Karpathen bilden die östliche Fortsetzung der Alpen und können in drei Alpine Grundgebirgsdecken unterteilt werden, von denen zwei, die Veporische und die Gemerische, bearbeitet wurden. In der Veporischen Einheit wurden polymetamorphe Grundgebirgseinheiten untersucht, um deren genaue Altersstellung zu definieren und sie isotopengeochemisch zu klassifizieren. Dagegen wurde in der der Gemerischen Einheit, welche die Veporische Einheit überlagert, ein spezialisierter S-Typ Granit im Detail untersucht, um die petrogenetischen Prozesse, die zur magmatischen Entwicklung dieses Granits geführt haben, zu identifizieren. U-Pb Datierungen an Zirkonen der Veporischen Grundgebirgseinheiten zeigen für die gesamte Veporische Einheit ordovizische Entsehungsalter an (440-470 Ma). Diese Datierungen revidieren publizierte kambrische Entstehungsalter dieses Grundgebirges. Die Isotopensignatur (epsilon Nd und 87Sr/86Sr) der ordovizischen Grundgebirgseinheiten, bestehend aus stark überprägten Amphiboliten und Gneissen, ist von der Signatur der sich im Norden anschliessenden Tatrischen Einheit gut unterscheidbar. Die Bleiisotopenzusammensetzung dieser Gesteine ist stark krustal geprägt und überschneidet sich mit der der Tatrischen Einheit. Zusammen mit den T-DM Altern sind diese Einheiten vergleichbar mit prävariskischen Einheiten der Alpen. Somit kann das ordovizische Grundgebirge zu den peri-Gondwana Terranen gezählt werden, die an einem aktiven Kontinentalrand im Norden von Gondwana gebildet wurden. In den Gesteinen der Veporischen Einheit wurde im Weiteren eine starke metamorphe überprägung und intensiver felsischer Magmatismus karbonischen Alters erkannt (320-350 Ma). Dieses Ereignis ist zeitgleich mit dem Magmatismus, welcher hauptsächlich in der sich im Norden anschliessenden Tatrischen Einheit beobachtet wird. Dieser gehört der variskischen Orogenese an. Intensive alpine Deformation und Metamorphose konnte in der südlichen Veporischen Einheit anhand der Einzelzirkondatierungen und der Isotopendaten der ordovizischen Einheiten nachgewiesen werden. Am Dlha Dolina Granit in der Gemerischen Einheit können starke Fraktionierungs- und Auto-Metasomatose-Effekte beobachtet werden. Durch die magmatische Fraktionierung wird eine Anreicherung der SEE erzeugt, wogegen die Metasomatose die SEE stark verarmt. Es kommt sogar zur Ausbildung eines Tetraden Effektes im SEE Muster, welche den starken Einfluss von Fluiden während der spät-magmatischen Phase belegt. Gesamtgesteins Pb-Pb Daten beschränken das minimale Intrusionsalter dieses Granites auf 240 Ma. Dieses Alter ist in guter übereinstimmung mit den Sr-Isotopendaten der magmatisch dominierten Gesteine, wohingegen die stark metasomatisch geprägten Gesteine ein zu radiogenes 87Sr/86Sri aufweisen. Während dieser Arbeit wurde intensiv mit der Blei-Isotopenzusammensetzung von Gesamtgesteinsproben gearbeitet. Um die Auswertung dieser Daten optimieren zu können wurde ein Computerscript für das GPL Programm Octave erstellt. Die Hauptaufgabe dieses Scripts besteht darin, Regressionen für geochronologische Anwendungen gemäss York (1969) zu berechnen. Ausserdem können mu und kappa-Werte für diese Regressionen berechnet und eine Hauptkomponentenanalyse, welche hilfreich für den Vergleich von zwei Datensätzen ist, durchgeführt werden. Am Ende der vorliegenden Arbeit wird die analytische Methode für einen Mikrowellen beschleunigten Säureaufschluss von granitoidem Material zur Bestimmung der Sr- und Nd-Isotopenzusammensetzung und der Elementkonzentrationen vorgestellt. Diese kombinierte Methode nutzt ein TIMS für die Sr und Nd Isotopenmessungen und eine Einzelkollektor-ICPMS zur Bestimmung der SEE, Rb und Sr Konzentrationen, welche mithilfe von relativen Sensitivitätsfaktoren gegenüber einem internen Standard quantifiziert werden. Diese Methode wird durch Messungen von internationalen Referenzmaterialien bewertet. Die Ergebnisse zeigen eine Reproduzierbarkeit von <10% für die Elementkonzentrationen und von <5% für Elementverhältnisse.

Memoria e short story postcoloniale femminile: Anita Desai e Alice Munro

In ogni capitolo, l’atto del ricordare viene indagato nelle diverse valenze che lo mettono in rapporto diretto con la nostalgia e l’oblio. L’analisi dei testi letterari copre un arco di tempo di quasi un secolo, partendo dalle innovazioni tecnico-stilistiche realizzate da Katherine Mansfield fino all’eccezionale ricchezza e al meritato successo di pubblico e critica della scrittrice canadese Alice Munro. La bibliografia dei testi primari e secondari è strutturata con criteri tematici e cronologici.

Thinkmix: dall'idea alla progettazione dello story network

Thinkmix è un network con componenti social che permette agli utenti di creare storie collaborando. La tesi illustra tutti gli step che hanno portato alla realizzazione di questo network: l'idea, la progettazione, lo sviluppo e la pubblicazione. Ritengo si tratti di un progetto ben riuscito e completo che mi ha permesso di esprimere totalmente le capacità acquisite durante il corso nelle varie materie (e non unicamente nella materia di riferimento) e di avvicinarmi a tematiche esterne a una laurea triennale (sicurezza informatica, marketing, acquisto e gestione di server dedicati, burocrazia per la pubblicazione di applicazione iOS e sito web con dominio).

Identification of stock units of Mullus barbatus (Linnaeus, 1758) in the Italian seas: development of genomic 2b-RAD markers and biological variation analysis.

This thesis is settled within the STOCKMAPPING project, which represents one of the studies that were developed in the framework of RITMARE Flagship project. The main goals of STOCKMAPPING were the creation of a genomic mapping for stocks of demersal target species and the assembling of a database of population genomic, in order to identify stocks and stocks boundaries. The thesis focuses on three main objectives representing the core for the initial assessment of the methodologies and structure that would be applied to the entire STOCKMAPPING project: individuation of an analytical design to identify and locate stocks and stocks boundaries of Mullus barbatus, application of a multidisciplinary approach to validate biological methods and an initial assessment and improvement for the genotyping by sequencing technique utilized (2b-RAD). The first step is the individuation of an analytical design that has to take in to account the biological characteristics of red mullet and being representative for STOCKMAPPING commitments. In this framework a reduction and selection steps was needed due to budget reduction. Sampling areas were ranked according the individuation of four priorities. To guarantee a multidisciplinary approach the biological data associated to the collected samples were used to investigate differences between sampling areas and GSAs. Genomic techniques were applied to red mullet for the first time so an initial assessment of molecular protocols for DNA extraction and 2b-RAD processing were needed. At the end 192 good quality DNAs have been extracted and eight samples have been processed with 2b-RAD. Utilizing the software Stacks for sequences analyses a great number of SNPs markers among the eight samples have been identified. Several tests have been performed changing the main parameter of the Stacks pipeline in order to identify the most explicative and functional sets of parameters.

Tailored epoxide monomers as building units for multifunctional poly(ethylene glycol)

Poly(ethylenglykol) (PEG) ist eines der wichtigsten Polymere für pharmazeutische und biomedizinische Zwecke. Dies lässt sich vor allen Dingen auf seine ausgezeichnete Biokompatibilität, seine hohe chemische Stabilität sowie seine sehr gute Wasserlöslichkeit zurückführen. Neben seiner Anwendung in Produkten wie Lebensmitteln und Kosmetika ist PEG vor allem im pharmazeutischen Bereich unersetzlich geworden. Hier dient PEG als Grundlage für Salben, es kommt aber auch in der sogenannten „PEGylierung“ zum Einsatz. Unter PEGylierung versteht man die kovalente Verknüpfung von PEG mit Wirkstoffmolekülen, beispielsweise Proteinen oder niedermolekularen Medikamenten. In der akademischen Forschung sind aber auch PEGylierte Nanopartikel oder durch PEG stablisierte Liposomen für die Applikation im Bereich der Medizin von hohem Interesse. Trotz seiner breiten Verwendung hat PEG zwei entscheidende Nachteile: Zum einen benötigt man gerade im Hinblick auf PEGylierungen viele funktionelle Gruppe, jedoch trägt PEG maximal zwei Hydroxyl-Gruppen (die Endgruppen), die für kovalente Verknüpfungen genutzt werden können. Zum anderen ist PEG nicht in physiologischer Umgebung abbaubar und kann daher in vivo oberhalb eines Molekulargewichts von 40 000 g/mol nicht eingesetzt werden, da sonst eine Ausscheidung über die Niere nicht möglich ist und eine ungewollte Anreicherung im Körper stattfindet.rnDie durch die geringe Anzahl an Endgruppen limitierte Beladungsdichte kann durch das Design neuer Epoxid-Derivate und deren statistischen Einbau in das PEG Rückgrat deutlich verbessert werden. Im ersten Teil dieser Arbeit werden drei neuartige funktionelle Oxirane vorgestellt, die systematisch mit Ethylenoxid copolymerisiert wurden, was die selektive Einführung verschiedener funktioneller Gruppen am Polymerrückgrat ermöglicht. Im Vordergrund der Betrachtungen standen die Eigenschaften der neuartigen multifunktionellen (mf)-PEG Copolymere im Hinblick auf ihr thermisches Verhalten sowie die Verteilung der funktionellen Gruppen (Mikrostruktur) innerhalb des PEG-Rückgrats. Die gezielte Adressierbarkeit der funktionellen Gruppen konnte durch verschiedene Modellreaktionen bestätigt werden. Darüber hinaus konnte gezeigt werden, dass sich mit der vorgestellten Synthesestrategie komplexe Hybridmaterialien, beispielsweise metallhaltige Polyether, darstellen lassen. Mit Hinblick auf die biomedizinischen Anwendungen und die Konkurrenz zu etablierten PEG-Hompolymeren, standen die Wasserlöslichkeit und die Toxizität der synthetisierten Materialien im Zentrum weiterer Untersuchungen. Alle dargestellten Polymere zeigten einen Trübungspunkt in Wasser, der sich in Abhängigkeit der Zusammensetzung und Hydrophobizität der Comonomere über ein weites Temperaturspektrum variieren und somit systematisch einstellen ließ. Die Toxizität der statistischen mf-PEGs lag im Bereich von PEG, was die mf-PEGs interessant für biomedizinische Anwendung macht.rnIm zweiten Teil der Arbeit wurden Copolymerisationen verwendet, um über erstmals hergestellte Epoxid-Inimere sauer spaltbare Einheiten in das Polyetherrückgrat einzuführen. Die neuen, verzweigten Strukturen wurden auf die Zersetzung in physiologisch relevantem Milieu untersucht. Die erzielte pH-abhängige Spaltbarkeit, kann für potenzielle Anwendungen beispielsweise in der Krebstherapie, von Vorteil sein.rn

Phosphonate ligands in extended inorganic hybrids and as radical units in complexes

Phosphonatliganden in erweiterten anorganischen Hybridmaterialien undrnals Radikalträgern in KomplexenrnrnAnorganisch-organische Hybridmaterialien sind in der Regel extrem vielseitig. Die systematische Darstellung von niederdimensionalen Materialien (eindimensionale Kettenverbindungen oder zweidimensionalen Schichtverbindungen) mit einer Kontrolle über die Art der Verbindung,rnbietet neue Möglichkeiten im Bereich des molekularen Magnetismus. Hier im Fall von Metall-Phosphonat Verbindungen in erweiterten anorganischen Hybriden wurde der pH - Wert während der Reaktion eingestellt, wodurch der Grad der Protonierung des Phosphonatliganden kontrolliert wurde. Aufgrund der Tatsache, dass alle erhaltenen Metall Phosphonatverbindungen neutral waren, konnte das Ligand zu Metallverhältnis erstmals vorhergesagt werden. So wurden mehrere neue Metall–Phosphonat Verbindungen im Bereich von Null-dimensionalen (I0O0, Co-Kristallisation von M(H2O)6 mitrndeprotonierten Phosphonatligand), über eindimensionalen (I1O0, Kettenstrukturen) bis hin zu zweidimensionalen (I2O0, Schichtstrukturen) ausführlich diskutiert in Bezug auf ihr magnetisches Verhalten. Im Allgemeinen sind die erwarteten Austauschwechselwirkungen in einem erweiterten anorganischen Hybridmaterial stark, weil oft ein Superaustausch durch ein einzelnes Sauerstoffatom möglich ist. Hier waren oft mehrere konkurrierende Austauschwechselwirkungen vorhanden, so dass kompliziertere magnetische Verhalten beobachtet wurden.rnrnDarüber hinaus wurden drei neue Beispiele von Nitronyl-Nitroxidradikale dargestellt, in denen eine zusätzliche saure Funktionalität eingeführt war. Die Auswirkungen des sauren Charakters der zusätzlich eingeführten Sulfonsäure oder Phosphonsäure-Gruppe auf das Nitronyl-Nitroxidradikal wurden im Detail zum ersten Mal untersucht. Die mit der Phosphonsäure-Gruppe versehenen Nitronyl-Nitroxidradikale sind perfekte Proben für die Untersuchung einer Spin-Verschiebung in Nitronyl-Nitroxidradikale durch EPR-Spektroskopie, aufgrund des eingeführten Phosphors. Auch der Protonierungsgrad der zusätzlich eingeführten Phosphonsäure-Gruppe wurde berücksichtigt. In dieser Arbeit wurden die ersten Metallkomplexe der neuen substituierten sauren Nitronyl-Nitroxidradikale vorgestellt. Die Koordination von Nickel(II) Metallionen an die saure, zweite funktionelle Gruppe des Nitronyl–Nitroxid Radikal wurde beschrieben. Die magnetische Austauschwechselwirkung der Metallionen untereinander und die Metall-Radikal-Austauschwechselwirkungen wurden untersucht. rnrnIm Allgemeinen können interessante molekulare magnetische Materialien dadurch dargestellt werden, dass die Dimension der Metall-Phosphonat-Verbindungen als Beispiele für die erweiterten anorganischen Hybridmaterialien gesteuert werden kann. Mit Nitronyl-Nitroxidradikale als organische Liganden können in Zukunft noch mehr Spin-Träger in anorganisch-organischen Gerüstmaterialien integriert werden um die magnetischen Eigenschaften zu verbesseren.rn

Survival of the warzone interpreter; behind the untold story

This dissertation examines the complicated and still little-known role of the interpreters in conflict zones. After a brief overview of the figure of the community interpreters, the thesis focuses on the interpreters in conflict zones, local civilians who risk their lives every day in the front line in order to help the Western countries in war. This dissertation shows the danger interpreters face because of their job: they are seen as traitors by their fellow citizens, the Taliban and other insurgent groups and for this reason they are hunted and killed. The purpose of this thesis is to show that Western countries are not doing enough to protect these interpreters, and in particular the United States' case will be analyzed: this country does not offer interpreters the right protection backing exchange, leaving them in the hands of the enemy once the US troops have finished their mission. The latter part of the dissertation presents the main organizations and international projects aimed at helping interpreters who are still trapped in their countries.

Dynamic characterisation of four nine-story large-panel R.C. buildings in Bishkek (Kyrgyzstan): A comparison between experimental ambient vibration analysis and numerical finite element modeling

With the outlook of improving seismic vulnerability assessment for the city of Bishkek (Kyrgyzstan), the global dynamic behaviour of four nine-storey r.c. large-panel buildings in elastic regime is studied. The four buildings were built during the Soviet era within a serial production system. Since they all belong to the same series, they have very similar geometries both in plan and in height. Firstly, ambient vibration measurements are performed in the four buildings. The data analysis composed of discrete Fourier transform, modal analysis (frequency domain decomposition) and deconvolution interferometry, yields the modal characteristics and an estimate of the linear impulse response function for the structures of the four buildings. Then, finite element models are set up for all four buildings and the results of the numerical modal analysis are compared with the experimental ones. The numerical models are finally calibrated considering the first three global modes and their results match the experimental ones with an error of less then 20%.

J. R. R. Tolkien tra adattamento e invenzione: "The Story of Kullervo" come rielaborazione del poema epico finlandese e proposta di traduzione

Opera di recente pubblicazione, "The Story of Kullervo" è il racconto che più di tutti mostra l'esistenza di un profondo legame tra J. R. R. Tolkien e la lingua e cultura finlandese. Scopo di questo elaborato è quello di analizzare soprattutto il rapporto tra l'autore e il poema epico finlandese, il Kalevala, proponendo la traduzione della storia. L'elaborato è strutturato nel seguente modo: nel primo paragrafo viene trattato il Kalevala come opera letteraria e come fonte di ispirazione per Tolkien. Nel secondo paragrafo viene analizzato il testo del racconto in quanto testo letterario e nel terzo vengono commentate le scelte traduttive effettuate.

Italian American women in Helen Barolini's Umbertina

This essay analyzes the story and the culture of Italian American women, in particular how they are treated in the novel "Umbertina" by Helen Barolini. The essay first introduces briefly the causes of the great migration and the conditions of immigrants in the US. Then the focus moves on the analysis of the main themes that belong to the genre of Italian American literature. After having shortly treated the biography of Helen Barolini and a general presentation of her novel Umbertina, the essay goes on with the description of its three Italian American female characters and, in particular, of what it meant to be both immigrants and women, together with all the interior and generational conflicts they had to face in order to accept their new hybrid identity. An analysis of some meaningful metaphorical objects in the novel, such as the tin heart and the bedspread, the metaphor of Persephone and of the threshold conclude the essay. Through the analysis of the story of Umbertina, this essay wants to show how migration can lead to a displacement and the kind of journey people had to undertake in order to overcome the conflicts deriving from their belonging to an in-between culture and to accept their hybrid identity.

Current approach to the haemodynamic management of septic shock patients in European intensive care units: a cross-sectional, self-reported questionnaire-based survey

The aim of this survey was to investigate clinicians' current approach to the haemodynamic management and resuscitation endpoints in septic shock.

Microsurgical reconstruction of the head and neck - Current practice of maxillofacial units in Germany, Austria, and Switzerland

Refinement in microvascular reconstructive techniques over the last 30 years has enabled an increasing number of patients to be rehabilitated for both functional and aesthetic reasons. The purpose of this study was to evaluate different microsurgical practice, including perioperative management, in Germany, Austria, and Switzerland. The DÖSAK collaborative group for Microsurgical Reconstruction developed a detailed questionnaire which was circulated to units in the three countries. The current practice of the departments was evaluated. Thirty-eight questionnaires were completed resulting in a 47.5% response rate. A considerable variation in the number of microsurgical reconstructions per year was noted. In relation to the timing of bony reconstruction, 10 hospitals did reconstructions primarily (26.3%), 19 secondarily (50%) and 9 (23.7%) hospitals used both concepts. In the postoperative course, 15.8% of hospitals use inhibitors of platelet aggregation, most hospitals use low molecular heparin (52.6%) or other heparin products (44.7%). This survey shows variation in the performance, management, and care of microsurgical reconstructions of patients. This is due in part to the microvascular surgeons available in the unit but it is also due to different types of hospitals where various types of care can be performed in these patients needing special perioperative care.