Investigations on the Radiation Characteristics of Broadband Strip Loaded Slotted Microstrip Antennas

With the recent progress and rapid increase in mobile terminals, the design of antennas for small mobile terminals is acquiring great importance. In view of this situation, several design concepts are already been addressed by the scientists and engineers. Compactness and efficiency are the major criteria for mobile terminal antennas. The challenging task of the microwave scientists and engineers is to device compact printed radiating systems having broadband behavior, together with good efficiency. Printed antenna technology has received popularity among antenna scientists after the introduction of microstrip antenna in 1970s. The successors in this kind such as printed monopoles and planar inverted F are also equally important. Scientists and Engineers are trying to explore this technology as a viable coast effective solution for forthcoming microwave revolution. The transmission line perspectives of antennas are very interesting. The concept behind any electromagnetic radiator is simple. Any electromagnetic system with a discontinuity is radiating electromagnetic energy. The size, shape and the orientation of the discontinuities controls the radiation characteristics of the system such as radiation pattern, gain, polarization etc. It can be either resonant or non resonant structure. Microstrip antennas are suitable for wireless applications due to their low cost, high gain and ease of fabrication. But the major disadvantage of micro strip antennas is their inherent narrow bandwidth. A lot of techniques are introduced by the researchers all over the world to enhance the bandwidth of micro strip patch antennas. The thesis addresses an attempt to enhance the bandwidth of micro strip patch antennas by incorporating impedance matching strip as a part of the micro strip patch antenna. The first part of the thesis deals with the broadband operation of the tilted square slot and polygonal slot loaded square micro strip patch antennas. The resonant mechanisms are clearly mentioned using the simulation and experimental studies. The bandwidth of the polygonal slotted broadband patch antenna is again enhanced by implementing an Lstrip feed mechanism. In the second major part of the thesis, a novel gain enhancement technique for single band and broadband square micro strip patch antennas is achieved by implementing offset stacked configurations.

Compact Uniplanar Antenna for Multiband Applications

A dual band RFID applications in 800 900 MHz and 2400 MHz band is presented. The Asymmetric Coplanar Strip (ACS) fed antenna consists of inverted L shaped monopole with a capacitive loading to provide necessary impedance matching and current distribution. The antenna has wide bandwidth from 790 MHz tol050 MHz and from 2350 MHz to 2640 MHz coving the RFID UHF and Microwave frequencies. The uniplanar antenna having overall dimensions of 48 mm x 14 mm is printed on one side of a substrate of dielectric constant 4.4 and height 1.6 mm.

Synthesis, Characterization and Applications of Modified TiO2 Systems

This thesis is divided in to 9 chapters and deals with the modification of TiO2 for various applications include photocatalysis, thermal reaction, photovoltaics and non-linear optics. Chapter 1 involves a brief introduction of the topic of study. An introduction to the applications of modified titania systems in various fields are discussed concisely. Scope and objectives of the present work are also discussed in this chapter. Chapter 2 explains the strategy adopted for the synthesis of metal, nonmetal co-doped TiO2 systems. Hydrothermal technique was employed for the preparation of the co-doped TiO2 system, where Ti[OCH(CH3)2]4, urea and metal nitrates were used as the sources for TiO2, N and metals respectively. In all the co-doped systems, urea to Ti[OCH(CH3)2]4 was taken in a 1:1 molar ratio and varied the concentration of metals. Five different co-doped catalytic systems and for each catalysts, three versions were prepared by varying the concentration of metals. A brief explanation of physico-chemical techniques used for the characterization of the material was also presented in this chapter. This includes X-ray Diffraction (XRD), Raman Spectroscopy, FTIR analysis, Thermo Gravimetric Analysis, Energy Dispersive X-ray Analysis (EDX), Scanning Electron Microscopy(SEM), UV-Visible Diffuse Reflectance Spectroscopy (UV-Vis DRS), Transmission Electron Microscopy (TEM), BET Surface Area Measurements and X-ray Photoelectron Spectroscopy (XPS). Chapter 3 contains the results and discussion of characterization techniques used for analyzing the prepared systems. Characterization is an inevitable part of materials research. Determination of physico-chemical properties of the prepared materials using suitable characterization techniques is very crucial to find its exact field of application. It is clear from the XRD pattern that photocatalytically active anatase phase dominates in the calcined samples with peaks at 2θ values around 25.4°, 38°, 48.1°, 55.2° and 62.7° corresponding to (101), (004), (200), (211) and (204) crystal planes (JCPDS 21-1272) respectively. But in the case of Pr-N-Ti sample, a new peak was observed at 2θ = 30.8° corresponding to the (121) plane of the polymorph brookite. There are no visible peaks corresponding to dopants, which may be due to their low concentration or it is an indication of the better dispersion of impurities in the TiO2. Crystallite size of the sample was calculated from Scherrer equation byusing full width at half maximum (FWHM) of the (101) peak of the anatase phase. Crystallite size of all the co-doped TiO2 was found to be lower than that of bare TiO2 which indicates that the doping of metal ions having higher ionic radius into the lattice of TiO2 causes some lattice distortion which suppress the growth of TiO2 nanoparticles. The structural identity of the prepared system obtained from XRD pattern is further confirmed by Raman spectra measurements. Anatase has six Raman active modes. Band gap of the co-doped system was calculated using Kubelka-Munk equation and that was found to be lower than pure TiO2. Stability of the prepared systems was understood from thermo gravimetric analysis. FT-IR was performed to understand the functional groups as well as to study the surface changes occurred during modification. EDX was used to determine the impurities present in the system. The EDX spectra of all the co-doped samples show signals directly related to the dopants. Spectra of all the co-doped systems contain O and Ti as the main components with low concentrations of doped elements. Morphologies of the prepared systems were obtained from SEM and TEM analysis. Average particle size of the systems was drawn from histogram data. Electronic structures of the samples were identified perfectly from XPS measurements. Chapter 4 describes the photocatalytic degradation of herbicides Atrazine and Metolachlor using metal, non-metal co-doped titania systems. The percentage of degradation was analyzed by HPLC technique. Parameters such as effect of different catalysts, effect of time, effect of catalysts amount and reusability studies were discussed. Chapter 5 deals with the photo-oxidation of some anthracene derivatives by co-doped catalytic systems. These anthracene derivatives come underthe category of polycyclic aromatic hydrocarbons (PAH). Due to the presence of stable benzene rings, most of the PAH show strong inhibition towards biological degradation and the common methods employed for their removal. According to environmental protection agency, most of the PAH are highly toxic in nature. TiO2 photochemistry has been extensively investigated as a method for the catalytic conversion of such organic compounds, highlighting the potential of thereof in the green chemistry. There are actually two methods for the removal of pollutants from the ecosystem. Complete mineralization is the one way to remove pollutants. Conversion of toxic compounds to another compound having toxicity less than the initial starting compound is the second way. Here in this chapter, we are concentrating on the second aspect. The catalysts used were Gd(1wt%)-N-Ti, Pd(1wt%)-N-Ti and Ag(1wt%)-N-Ti. Here we were very successfully converted all the PAH to anthraquinone, a compound having diverse applications in industrial as well as medical fields. Substitution of 10th position of desired PAH by phenyl ring reduces the feasibility of photo reaction and produced 9-hydroxy 9-phenyl anthrone (9H9PA) as an intermediate species. The products were separated and purified by column chromatography using 70:30 hexane/DCM mixtures as the mobile phase and the resultant products were characterized thoroughly by 1H NMR, IR spectroscopy and GCMS analysis. Chapter 6 elucidates the heterogeneous Suzuki coupling reaction by Cu/Pd bimetallic supported on TiO2. Sol-Gel followed by impregnation method was adopted for the synthesis of Cu/Pd-TiO2. The prepared system was characterized by XRD, TG-DTG, SEM, EDX, BET Surface area and XPS. The product was separated and purified by column chromatography using hexane as the mobile phase. Maximum isolated yield of biphenyl of around72% was obtained in DMF using Cu(2wt%)-Pd(4wt%)-Ti as the catalyst. In this reaction, effective solvent, base and catalyst were found to be DMF, K2CO3 and Cu(2wt%)-Pd(4wt%)-Ti respectively. Chapter 7 gives an idea about the photovoltaic (PV) applications of TiO2 based thin films. Due to energy crisis, the whole world is looking for a new sustainable energy source. Harnessing solar energy is one of the most promising ways to tackle this issue. The present dominant photovoltaic (PV) technologies are based on inorganic materials. But the high material, low power conversion efficiency and manufacturing cost limits its popularization. A lot of research has been conducted towards the development of low-cost PV technologies, of which organic photovoltaic (OPV) devices are one of the promising. Here two TiO2 thin films having different thickness were prepared by spin coating technique. The prepared films were characterized by XRD, AFM and conductivity measurements. The thickness of the films was measured by Stylus Profiler. This chapter mainly concentrated on the fabrication of an inverted hetero junction solar cell using conducting polymer MEH-PPV as photo active layer. Here TiO2 was used as the electron transport layer. Thin films of MEH-PPV were also prepared using spin coating technique. Two fullerene derivatives such as PCBM and ICBA were introduced into the device in order to improve the power conversion efficiency. Effective charge transfer between the conducting polymer and ICBA were understood from fluorescence quenching studies. The fabricated Inverted hetero junction exhibited maximum power conversion efficiency of 0.22% with ICBA as the acceptor molecule. Chapter 8 narrates the third order order nonlinear optical properties of bare and noble metal modified TiO2 thin films. Thin films were fabricatedby spray pyrolysis technique. Sol-Gel derived Ti[OCH(CH3)2]4 in CH3CH2OH/CH3COOH was used as the precursor for TiO2. The precursors used for Au, Ag and Pd were the aqueous solutions of HAuCl4, AgNO3 and Pd(NO3)2 respectively. The prepared films were characterized by XRD, SEM and EDX. The nonlinear optical properties of the prepared materials were investigated by Z-Scan technique comprising of Nd-YAG laser (532 nm,7 ns and10 Hz). The non-linear coefficients were obtained by fitting the experimental Z-Scan plot with the theoretical plots. Nonlinear absorption is a phenomenon defined as a nonlinear change (increase or decrease) in absorption with increasing of intensity. This can be mainly divided into two types: saturable absorption (SA) and reverse saturable absorption (RSA). Depending on the pump intensity and on the absorption cross- section at the excitation wavelength, most molecules show non- linear absorption. With increasing intensity, if the excited states show saturation owing to their long lifetimes, the transmission will show SA characteristics. Here absorption decreases with increase of intensity. If, however, the excited state has strong absorption compared with that of the ground state, the transmission will show RSA characteristics. Here in our work most of the materials show SA behavior and some materials exhibited RSA behavior. Both these properties purely depend on the nature of the materials and alignment of energy states within them. Both these SA and RSA have got immense applications in electronic devices. The important results obtained from various studies are presented in chapter 9.

Synthesis, Characterization and Applications of Hybrid Nanocomposites of TiO2 With Conducting Polymers

A nanocomposite is a multiphase solid material where one of the phases has one, two or three dimensions of less than 100 nanometers (nm), or structures having nano-scale repeat distances between the different phases that make up the material. In the broadest sense this definition can include porous media, colloids, gels and copolymers, but is more usually taken to mean the solid combination of a bulk matrix and nano-dimensional phase(s) differing in properties due to dissimilarities in structure and chemistry. The mechanical, electrical, thermal, optical, electrochemical, catalytic properties of the nanocomposite will differ markedly from that of the component materials. Size limits for these effects have been proposed, <5 nm for catalytic activity, <20 nm for making a hard magnetic material soft, <50 nm for refractive index changes, and <100 nm for achieving superparamagnetism, mechanical strengthening or restricting matrix dislocation movement. Conducting polymers have attracted much attention due to high electrical conductivity, ease of preparation, good environmental stability and wide variety of applications in light-emitting, biosensor chemical sensor, separation membrane and electronic devices. The most widely studied conducting polymers are polypyrrole, polyaniline, polythiophene etc. Conducting polymers provide tremendous scope for tuning of their electrical conductivity from semiconducting to metallic region by way of doping and are organic electro chromic materials with chemically active surface. But they are chemically very sensitive and have poor mechanical properties and thus possessing a processibility problem. Nanomaterial shows the presence of more sites for surface reactivity, they possess good mechanical properties and good dispersant too. Thus nanocomposites formed by combining conducting polymers and inorganic oxide nanoparticles possess the good properties of both the constituents and thus enhanced their utility. The properties of such type of nanocomposite are strongly depending on concentration of nanomaterials to be added. Conducting polymer composites is some suitable composition of a conducting polymer with one or more inorganic nanoparticles so that their desirable properties are combined successfully. The composites of core shell metal oxide particles-conducting polymer combine the electrical properties of the polymer shell and the magnetic, optical, electrical or catalytic characteristics of the metal oxide core, which could greatly widen their applicability in the fields of catalysis, electronics and optics. Moreover nanocomposite material composed of conducting polymers & oxides have open more field of application such as drug delivery, conductive paints, rechargeable batteries, toners in photocopying, smart windows, etc.The present work is mainly focussed on the synthesis, characterization and various application studies of conducting polymer modified TiO2 nanocomposites. The conclusions of the present work are outlined below, Mesoporous TiO2 was prepared by the cationic surfactant P123 assisted hydrothermal synthesis route and conducting polymer modified TiO2 nanocomposites were also prepared via the same technique. All the prepared systems show XRD pattern corresponding to anatase phase of TiO2, which means that there is no phase change occurring even after conducting polymer modification. Raman spectroscopy gives supporting evidence for the XRD results. It also confirms the incorporation of the polymer. The mesoporous nature and surface area of the prepared samples were analysed by N2 adsorption desorption studies and the mesoporous ordering can be confirmed by low angle XRD measurementThe morphology of the prepared samples was obtained from both SEM & TEM. The elemental analysis of the samples was performed by EDX analysisThe hybrid composite formation is confirmed by FT-IR spectroscopy and X-ray photoelectron spectroscopyAll the prepared samples have been used for the photocatalytic degradation of dyes, antibiotic, endocrine disruptors and some other organic pollutants. Photocatalytic antibacterial activity studies were also performed using the prepared systemsAll the prepared samples have been used for the photocatalytic degradation of dyes, antibiotic, endocrine disruptors and some other organic pollutants. Photocatalytic antibacterial activity studies were also performed using the prepared systems Polyaniline modified TiO2 nanocomposite systems were found to have good antibacterial activity. Thermal diffusivity studies of the polyaniline modified systems were carried out using thermal lens technique. It is observed that as the amount of polyaniline in the composite increases the thermal diffusivity also increases. The prepared systems can be used as an excellent coolant in various industrial purposes. Nonlinear optical properties (3rd order nonlinearity) of the polyaniline modified systems were studied using Z scan technique. The prepared materials can be used for optical limiting Applications. Lasing studies of polyaniline modified TiO2 systems were carried out and the studies reveal that TiO2 - Polyaniline composite is a potential dye laser gain medium.

Not the outside but the inside matters : functional analysis of Capricious and Tartan during Drosophila tracheal morphogenesis

The tubular structures, which transport essential gases, liquids, or cells from one site to another, are shared among various divergent organisms. These highly organized tubular networks include lung, kidney, vasculature and mammary gland in mammals as well as trachea and salivary gland in Drosophila melanogaster. Many questions regarding the tubular morphogenesis cannot be addressed sufficiently by investigating the mammalian organs because their structures are extremely complex and therefore, systematic analyses of genetic and cellular programs guiding the development is not possible. In contrast, the Drosophila tracheal development provides an excellent model system since many molecular markers and powerful tools for genetic manipulations are available. Two mechanisms were shown to be important for the outgrowth of tracheal cells: the FGF signaling pathway and the interaction between the tracheal cells and the surrounding mesodermal cells. The Drosophila FGF ligand encoded by branchless (bnl) is localized in groups of cells near tracheal metameres. The tracheal cells expressing the FGF receptor breathless (btl) respond to these sources of FGF ligand and extend towards them. However, this FGF signaling pathway is not sufficient for the formation of continuous dorsal trunk, the only muticellular tube in tracheal system. Recently, it was found out that single mesodermal cells called bridge-cells are essential for the formation of continuous dorsal trunk as they direct the outgrowth of dorsal trunk cells towards the correct targets. The results in this PhD thesis demonstrate that a cell adhesion molecule Capricious (Caps), which is specifically localized on the surface of bridge-cells, plays an essential role in guiding the outgrowing dorsal trunk cells towards their correct targets. When caps is lacking, some bridge-cells cannot stretch properly towards the adjacent posterior tracheal metameres and thus fail to interconnect the juxtaposing dorsal trunk cells. Consequently, discontinuous dorsal trunks containing interruptions at several positions are formed. On the other hand, when caps is ectopically expressed in the mesodermal cells through a twi-GAL4 driver, these mesodermal cells acquire a guidance function through ectopic caps and misguide the outgrowing dorsal trunk cells in abnormal directions. As a result, disconnected dorsal trunks are formed. These loss- and gain-of-function studies suggest that Caps presumably establishes the cell-to-cell contact between the bridge-cells and the tracheal cells and thereby mediates directly the guidance function of bridge-cells. The most similar protein known to Caps is another cell adhesion molecule called Tartan (Trn). Interestingly, trn is expressed in the mesodermal cells but not in the bridge-cells. When trn is lacking, the outgrowth of not only the dorsal trunks but also the lateral trunks are disrupted. However, in contrast to the ectopic expression of caps, the misexpression of trn does not affect tracheal development. Whereas Trn requires only its extracellular domain to mediate the matrix function, Caps requires both its extracellular and intracellular domains to function as a guidance molecule in the bridge-cells. These observations suggest that Trn functions differently from Caps during tracheal morphogenesis. Presumably, Trn mediates a matrix function of mesodermal cells, which support the tracheal cells to extend efficiently through the surrounding mesodermal tissue. In order to determine which domains dictate the functional specificity of Caps, two hybrid proteins CapsEdTrnId, which contains the Caps extracellular domain and the Trn intracellular domain, and TrnEdCapsId, which consists of the Trn extracellular domain and the Caps intracellular domain, were constructed. Gain of function and rescue experiments with these hybrid proteins suggest on one hand that the extracellular domains of Caps and Trn are functionally redundant and on the other hand that the intracellular domain dictates the functional specificity of Caps. In order to identify putative interactors of Caps, yeast two-hybrid screening was performed. An in vivo interaction assay in yeast suggests that Ras64B interacts specifically with the Caps intracellular domain. In addition, an in vitro binding assay reveals a direct interaction between an inactive form of Ras64B and the Caps intracellular domain. ras64B, which encodes a small GTPase, is expressed in the mesodermal cells concurrently as caps. Finally, a gain-of-function study with the constitutively active Ras64B suggests that Ras64B presumably functions downstream of Caps. All these results suggest consistently that the small GTPase Ras64B binds specifically to the Caps intracellular domain and may thereby mediate the guidance function of Caps.

Vergleichende Untersuchungen Methicillin-resistenter Staphylococcus aureus des Klinikums Kassel der Jahre 1999 bis 2004

Die vorliegende Arbeit liefert erstmals einen umfassenden Überblick über die molekulare Epidemiologie von Methicillin resistenten Staphylococcus aureus (MRSA) eines nordhessischen Krankenhauses inklusive seines Umfeldes und deren Entwicklung in einem Zeitraum von fünf Jahren. Von besonderer Bedeutung ist, dass die MRSA-Stämme hierfür nicht nur anhand ihrer SCCmec-Region (staphylococcal cassette chromosome) typisiert wurden, sondern eine weitergehende Charakterisierung auf Grund der Bestimmung des Vorkommens von Antibiotikaresistenz- und Toxingenen, sowie Plasmiden erfolgte. Dabei wurde ein neuer SCCmec-Typ entdeckt und charakterisiert und weitere noch unbekannte SCCmec-Elemente beschrieben. Bei der Charakterisierung der MRSA-Kollektive konnten bzgl. aller untersuchten Eigenschaften im Laufe der Zeit signifikante Veränderungen beobachtet werden. Am deutlichsten waren diese Unterschiede zwischen dem ältesten Kollektiv aus 1999 und allen nachfolgenden Kollektiven. Die Kollektive aus 2001, 2002, 2003 und 2004 zeigten untereinander größere Ähnlichkeiten, aber dennoch gleichzeitig eine tendenziell divergente Entwicklung einzelner Eigenschaften. Besonders auffallend war das dominante Auftreten von SCCmecIV mit 63-87% der Isolate eines Kollektivs ab 2001, gegenüber 16% in 1999. Weiterhin erfolgte eine markante Veränderung im Vorkommen einzelner Antibiotikaresistenzgene von 1999 bis 2004. So waren aacA-aphD und ermA bei MRSA aus 1999 mit 84% bzw. 90% deutlich häufiger als in allen Kollektiven der folgenden Jahre (aacA-aphD: max. 32%, ermA: max. 40%). Wohingegen ermC ein stets zunehmendes Vorkommen von 3% auf 67% über den Untersuchungszeitraum zeigte. Unkontinuierliches aber statistisch relevant vermehrtes Auftreten von tetM konnte bei Isolaten aus 1999 (40%) und 2004 (74%) nachgewiesen werden. Auch bei Toxingenen zeigten sich deutliche Unterschiede in der zeitlichen Verteilung. Ab 2001 zeigten alle Isolate wesentlich höhere Anteile an sec, seg und sei verglichen mit den MRSA aus 1999. So konnte sec im Kollektiv aus 1999 gar nicht nachgewiesen werden, in denen der Folgejahre mit 54-77%. Die Werte für seg und sei stiegen von 48% bzw. 41% in 1999 kontinuierlich auf über 90% in 2004. Die Häufigkeit von MRSA sowohl mit mehreren Resistenzgenen als auch die mit mehreren Toxingenen nahm im Laufe der Zeit zu und korrelierte mit dem Vorkommen von Plasmiden. Bezüglich seiner Korrelation mit den vorkommenden Plasmiden zeigte SCCmecIV im Erhebungszeitraum besonders deutlich eine Veränderung. So nahm über den Zeitraum der Beobachtung die Anzahl der Stämme die zusätzlich zu einem großen Plasmid ein weiteres kleines Plasmid besaßen signifikant zu. Auch beim Vergleich der SCCmec-Typen der MRSA-Isolate konnten Unterschiede bzgl. aller weiteren untersuchten Eigenschaften dargestellt werden. So zeigten z.B. alle SCCmecIIIA das sea-Gen, während dies bei allen anderen in der vorliegenden Arbeit untersuchten SCCmec-Typen nur vereinzelt vorkam. SCCmecII-Stämme wiesen sowohl die meisten Antibiotikaresistenz- als auch Toxingene auf. Es wurde ferner gezeigt, dass Stämme mit vielen Resistenzgenen auch eine hohe Anzahl Toxingene besaßen und dies im Zusammenhang mit einem erhöhten Plasmidgehalt stehen könnte. Aus den MRSA-Kollektiven isolierte Plasmide konnten aufgrund von Restriktionsanalysen als verwandt zu β-Laktamase-Plasmiden des Grundtyps pI524 und pI258 beschrieben werden. Der in vorliegender Arbeit gezeigte Zusammenhang zwischen der Anzahl von direct repeat units (dru) in der Hypervariablen Region (HVR) und dem SCCmec-Typ half den Unterschied zwischen SCCmecIV und SCCmecIVA, sowie die Sonderstellung des in vorliegender Arbeit erstmalig beschriebenen SCCmecIA/II darzustellen. Nicht alle Isolate konnten einem bekannten SCCmec-Typ zugeordnet werden, es handelt sich bei diesen Ausnahmen um weitere noch unbekannte und hier erstmalig beschriebene SCCmec-Typen. Aufgrund der vorliegenden Arbeit konnte ein neuer SCCmec-Typ definiert werden, namentlich der Typ SCCmecIA/II, der seit 1999 in der Region gehäuft vorkommt Die vorliegenden Untersuchungen zeigten somit, dass die Epidemiologie von MRSA der Region Nordhessen trotz bestehender Gemeinsamkeiten zur MRSA-Situation in ganz Deutschland auch Besonderheiten aufweist. Diese nun zu kennen kann einen Beitrag zur gezielten Verbesserung bisheriger Maßnahmen zur Ausbreitungskontrolle von MRSA in der nordhessischen Region leisten.

3D Simultaneous Inversion for Seismic Structure and Local Hypocenters in Germany under Consideration of Seismic Anisotropy in the Upper Mantel

The main task of this work has been to investigate the effects of anisotropy onto the propagation of seismic waves along the Upper Mantle below Germany and adjacent areas. Refraction- and reflexion seismic experiments proved the existence of Upper Mantle anisotropy and its influence onto the propagation of Pn-waves. By the 3D tomographic investigations that have been done here for the crust and the upper mantle, considering the influence of anisotropy, a gap for the investigations in Europe has been closed. These investigations have been done with the SSH-Inversionprogram of Prof. Dr. M. Koch, which is able to compute simultaneously the seismic structure and hypocenters. For the investigation, a dataset has been available with recordings between the years 1975 to 2003 with a total of 60249 P- and 54212 S-phase records of 10028 seismic events. At the beginning, a precise analysis of the residuals (RES, the difference between calculated and observed arrivaltime) has been done which confirmed the existence of anisotropy for Pn-phases. The recognized sinusoidal distribution has been compensated by an extension of the SSH-program by an ellipse with a slow and rectangular fast axis with azimuth to correct the Pn-velocities. The azimuth of the fast axis has been fixed by the application of the simultaneous inversion at 25° - 27° with a variation of the velocities at +- 2.5 about an average value at 8 km/s. This new value differs from the old one at 35°, recognized in the initial residual analysis. This depends on the new computed hypocenters together with the structure. The application of the elliptical correction has resulted in a better fit of the vertical layered 1D-Model, compared to the results of preceding seismological experiments and 1D and 2D investigations. The optimal result of the 1D-inversion has been used as initial starting model for the 3D-inversions to compute the three dimensional picture of the seismic structure of the Crust and Upper Mantle. The simultaneous inversion has showed an optimization of the relocalization of the hypocenters and the reconstruction of the seismic structure in comparison to the geology and tectonic, as described by other investigations. The investigations for the seismic structure and the relocalization have been confirmed by several different tests. First, synthetic traveltime data are computed with an anisotropic variation and inverted with and without anisotropic correction. Further, tests with randomly disturbed hypocenters and traveltime data have been proceeded to verify the influence of the initial values onto the relocalization accuracy and onto the seismic structure and to test for a further improvement by the application of the anisotropic correction. Finally, the results of the work have been applied onto the Waldkirch earthquake in 2004 to compare the isotropic and the anisotropic relocalization with the initial optimal one to verify whether there is some improvement.

Facilitating folding of outer membrane proteins, roles of the periplasmic chaperone Skp and the outer membrane lipoprotein BamD

This thesis describes several important advancements in the understanding of the assembly of outer membrane proteins of Gram-negative bacteria like Escherichia coli. A first study was performed to identify binding regions in the trimeric chaperone Skp for outer membrane proteins. Skp is known to facilitate the passage of unfolded outer membrane proteins (OMPs) through the periplasm to the outer membrane (OM). A gene construct named “synthetic chaperone protein (scp)” gene was used to express a fusion protein (Scp) into the cytoplasm of E. coli. The scp gene was used as a template to design mutants of Scp suitable for structural and functional studies using site-directed spectroscopy. Fluorescence resonance energy transfer (FRET) was used to identify distances in Skp-OmpA complexes that separate regions in Scp and in outer membrane protein A (OmpA) from E. coli. For this study, single cysteine (Cys) mutants and single Cys - single tryptophan (Trp) double mutants of Scp were prepared. For FRET experiments, the cysteines were labeled with the tryptophan fluorescence energy acceptor IAEDANS. Single Trp mutants of OmpA were used as fluorescence energy donors. In the second part of this thesis, the function of BamD and the structure of BamD-Scp complexes were examined. BamD is an essential component of the β-barrel assembly machinery (BAM) complex of the OM of Gram-negative bacteria. Fluorescence spectroscopy was used to probe the interactions of BamD with lipid membranes and to investigate the interactions of BamD with possible partner proteins from the periplasm and from the OM. A range of single cysteine (Cys) and single tryptophan (Trp) mutants of BamD were prepared. A very important conclusion from the extensive FRET study is that the essential lipoprotein BamD interacts and binds to the periplasmic chaperone Skp. BamD contains tetratrico peptide repeat (TPR) motifs that are suggested to serve as docking sites for periplasmic chaperones such as Skp.

Gone with the internet - How the old education was lost

Despite its young history, Computer Science Education has seen a number of "revolutions". Being a veteran in the field, the author reflects on the many changes he has seen in computing and its teaching. The intent of this personal collection is to point out that most revolutions came unforeseen and that many of the new learning initiatives, despite high financial input, ultimately failed. The author then considers the current revolution (MOOC, inverted lectures, peer instruction, game design) and, based on the lessons learned earlier, argues why video recording is so successful. Given the fact that this is the decade we lost print (papers, printed books, book shops, libraries), the author then conjectures that the impact of the Internet will make this revolution different from previous ones in that most of the changes are irreversible. As a consequence he warns against storming ahead blindly and suggests to conserve - while it is still possible - valuable components of what might soon be called the antebellum age of education.

Funktion und Biogenese kleiner RNAs in Dictyostelium discoideum

RNA mediated gene silencing pathways are highly conserved among eukaryotes and they have been well investigated in animals and in plants. Longer dsRNA molecules trigger the silencing pathways: RNase III proteins and their dsRNA binding protein (dsRBP) partners recognize those molecules as a substrate and process 21 nucleotide long microRNAs (miRNAs) or small interfering RNAs (siRNAs). Some organisms encode RNA dependent RNA polymerases (RdRPs), which are able to expand the pool of existing siRNAs. Argonaute proteins are able to bind small regulatory RNAs and are subsequently recruited to target mRNAs by base complementary. This leads in turn to transcriptional or posttranscriptional silencing of respective genes. The Dictyostelium discoideum genome encodes two Dicer homologues (DrnA and DrnB), five Argonaute proteins (AgnA to AgnE) and three RdRPs (RrpA to RrpC). In addition, the amoeba is known to express miRNAs and siRNAs, while the latter derive mainly from the DIRS-1 retrotransposon. One part of this work focused on the miRNA biogenesis pathway of D. discoideum. It was shown that the dsRNA binding protein RbdB is a necessary component for miRNA processing in the amoeba. There were no mature miRNAs detectable by Northern blot analysis in rbdB- strains, which is also true for drnB mutants. Moreover, primary miRNA-transcripts (pri-miRNAs) accumulated in rbdB- and drnB- strains. Fluorescence microscopy studies showed a nuclear localization of RbdB. RbdB accumulated in distinct perinucleolar foci. These were reminiscent of plant dicing bodies that contain essential protein components for miRNA processing. It is well known that RNase III enzymes and dsRBPs work together during miRNA processing in higher eukaryotes. This work demonstrated that the same is true for members of the amoebozoa supergroup. In Arabidopsis the nuclear zinc finger protein Serrate (SE) is also necessary for miRNA processing. The D. discoideum homologue SrtA, however, is not relevant which has been shown by the analysis of the respective knockdown strain. MiRNAs are known to be differentially expressed in several RNAi knockout strains. The accumulation of miRNAs in agnA- strains and a strong decrease in rbdB- strains were criteria that could thus be successfully used (among others) to identify and validate new miRNAs candidates by Illumina®-RNA sequencing. In another part of this study, the silencing and amplification of the DIRS-1 retrotransposons was analyzed in more detail. It was already known that DIRS-1 transcripts and extrachromosomal DIRS-1 DNA molecules accumulated in agnA- strains. This phenotype was correlated with the loss of endogenous DIRS-1 siRNAs in the knockout strain. By deep sequencing analysis of small RNAs from the AX2 wild type and the agnA- strain, the strong decrease of endogenous DIRS-1 siRNAs in the mutant strain (accounting for 70 %) could be confirmed. Further analysis of the data revealed an unequal distribution of DIRS-1 derived siRNAs along the retroelement in the wild type strain, since only very few of them matched the inverted terminal repeats (ITRs) and the 5’- half of the first open reading frame (ORF). Besides, sense and antisense siRNAs were asymmetrically distributed, as well. By using different reporter constructs it was shown indirectly that AgnA is necessary for the RrpC mediated production of secondary DIRS-1 siRNAs. These analyses also demonstrated an amplification of siRNAs in 5’- and in 3’-direction. Further analysis of the agnA- strain revealed that not only DIRS-1 sense transcripts but also ORF2 and ORF3 encoded proteins were enriched. In contrast, the ORF1 encoded protein GAG was equally expressed in the mutant and the wild type. This might reflect the unequal distribution of endogenous DIRS-1 siRNAs along the retrotransposon. Southern Blot and PCR-analyses showed that extrachromosomal DIRS-1 DNA molecules are present in the cytoplasm of angA- strains and that they are complementary to sense transcripts of intact DIRS-1 elements. Thus, the extrachromosomal DIRS-1 intermediates are likely incomplete cDNA molecules generated by the DIRS-1 encoded reverse transcriptase. One could hypothesize that virus like particles (VLPs) are the places of DIRS-1 cDNA synthesis. At least, DIRS-1 GAG proteins interact and fluorescence microscopy studies showed that they localize in distinct cytoplasmic foci which accumulate in close proximity to the nuclei.

A simple retroelement based knock-down system in Dictyostelium

Characteristics of DIRS-1 Mediated Knock-Downs __ We have previously shown that the most abundant Dictyostelium discoideum retroelement DIRS-1 is suppressed by RNAi mechanisms. Here we provide evidence that both inverted terminal repeats have strong promoter activity and that bidirectional expression apparently generates a substrate for Dicer. A cassette containing the inverted terminal repeats and a fragment of a gene of interest was sufficient to activate the RNAi response, resulting in the generation of ~21 nt siRNAs, a reduction of mRNA and protein expression of the respective endogene. Surprisingly, no transitivity was observed on the endogene. This was in contrast to previous observations, where endogenous siRNAs caused spreading on an artificial transgene. Knock-down was successful on seven target genes that we examined. In three cases a phenotypic analysis proved the efficiency of the approach. One of the target genes was apparently essential because no knock-out could be obtained; the RNAi mediated knock-down, however, resulted in a very slow growing culture indicating a still viable reduction of gene expression.