Steering manufacturing firms towards service business model innovation

Increasingly, manufacturing firms are turning to services as a new way of creating and capturing value. Despite its potential benefits, many new product-service providers struggle to deploy service activities effectively, not least because they fail to refect the presence of service activities in their performance management systems. This article reports the results of an in-depth case study, which examines how manufacturers can steer the transition towards services. It shows that manufacturing firms need to emphasize two separate but related dimensions of the market performance of service activities: "service adoption," refecting the proportion of customers who purchase the manufacturer's services; and "service coverage," signaling the range of service elements or the comprehensiveness of the service contract that customers opt for. These two indicators, refecting service market performance, should be supplemented with a "complementarity index" designed to disclose whether the relationship between products and services is reinforcing or substitutive. When combined, these indicators allow manufacturing firms to deploy a service-based business model in an integrated and sustainable manner. © 2013 by The Regents of the University of California. All rights reserved.

Manufacturing dish shaped rings on radial-axial ring rolling mills

Ring rolling is an established method to produce seamless rings of different cross-sectional geometries. For dish shaped rings, there are applications in different areas such as offshore, aeronautics or the energy sector. At the moment, dish shaped rings are produced by machining of rings with rectangular shaped cross section, by (open die) hollow forging on a conical mandrel or by using shaped ring rolling tools. These ways of manufacturing have the disadvantage of high material waste, additional costs for special tools, long process time and limited or inflexible geometries. Therefore, the manufacturing of dish shaped rings on conventional radial-axial ring rolling mills would expand the range of products for ring producers. The aim of this study is to investigate the feasibility of an alternative to the current manufacturing processes, without requiring additional tooling and material costs. Therefore, the intended formation of dish shaped rings-previously regarded as a form error-is investigated. Based on an analysis of geometrical requirements and metal flow mechanisms, a rolling strategy is presented, causing dishing and ring climbing by a large height reduction of the ring. Using this rolling strategy dish shaped rings with dishing angles up to 18° were achieved. In addition to the experiments finite element method (FEM)-simulations of the process have been successfully conducted, in order to analyze the local strain evolution. However, when the contact between ring and main roll is lost in the process the ring starts to oscillate around the mandrel and neither dishing nor ring climbing is observed. © 2013 German Academic Society for Production Engineering (WGP).

A framework for distributed intelligent automation systems developments

This chapter proposes a simple and pragmatic framework that has been developed for classifying and analyzing developments in distributed automation and information systems - especially those that have been labelled intelligent systems for different reasons. The framework dissects the different stages in the standard feedback process and assesses distribution in terms of the level of granularity of the organization that is being considered. The framework has been found to be useful in comparing and assessing different distributed industrial control paradigms and also for examining common features of different development projects - especially those that might be sourced from different sectors or domains. © Springer-Verlag Berlin Heidelberg 2013.

Control limitations from distributed sensing: Theory and Extremely Large Telescope application

We investigate performance bounds for feedback control of distributed plants where the controller can be centralized (i.e. it has access to measurements from the whole plant), but sensors only measure differences between neighboring subsystem outputs. Such "distributed sensing" can be a technological necessity in applications where system size exceeds accuracy requirements by many orders of magnitude. We formulate how distributed sensing generally limits feedback performance robust to measurement noise and to model uncertainty, without assuming any controller restrictions (among others, no "distributed control" restriction). A major practical consequence is the necessity to cut down integral action on some modes. We particularize the results to spatially invariant systems and finally illustrate implications of our developments for stabilizing the segmented primary mirror of the European Extremely Large Telescope. © 2013 Elsevier Ltd. All rights reserved.

MIMO System capacity improvements using radio-over-fibre distributed antenna system technology

The effect of antenna separation in a 3×3 MIMO system using RoF DAS technology is investigated. Larger antenna separation is found to improve the throughput due to reduced channel correlation and improved SNR. © OSA/OFC/NFOEC 2011.

Macro - A tool to support distributed MDO

This paper addresses a new way for handling distributed design know as the Macro concept. It is based round the assumption that future design teams will become more distributed in nature as industry exploits the Internet and other integrated communication and data exchange systems. The paper notes that this concept is part of an attack on the problems associated with the total process of Distribute Multi-Disciplinary design and Optimisation. The concepts rely on the creation of distributed self-building and self-organising teams made up from members who are globally distributed. The paper describes both the approach adopted and its implementation in a prototype software system operating over the Internet. In essence the work presented is describing a novel method for implementing a distributed design process which is far from complete but which is producing challenging ideas. © 2000 by Cranfield University.

UbiDM: A new paradigm for product design and manufacturing via ubiquitous computing technology

Since ubiquitous technology was introduced in the early 1980s, it has rapidly developed, and been applied to various domains mainly for the improvement of human life. In this article, the authors propose that ubiquitous computing technology can be effectively used for the design and manufacturing of a product by proposing a new paradigm, called UbiDM (Design and Manufacture via Ubiquitous Computing Technology). The key aspect of UbiDM is the utilisation of the entire product lifecycle information obtained via ubiquitous computing technology for the design and manufacture of the product. The new paradigm can solve many of the problems that have not been properly handled by previous manufacturing paradigms. Specifically, it will address the concept of UbiDM by the following aspects: (1) why there is a need for UbiDM; (2) the essence of UbiDM; (3) enabling technologies; (4) application area; (5) worldwide RD status; and (6) the societal impacts of UbiDM.

Experimental evaluation of layout designs for 3 × 3 MIMO-enabled radio-over-fiber distributed antenna systems

This paper experimentally demonstrates that, for two representative indoor distributed antenna system (DAS) scenarios, existing radio-over-fiber (RoF) DAS installations can enhance the capacity advantages of broadband 3 × 3 multiple-input-multiple-output (MIMO) radio services without requiring additional fibers or multiplexing schemes. This is true for both single-and multiple-user cases with a single base station and multiple base stations. First, a theoretical example is used to illustrate that there is a negligible improvement in signal-to-noise ratio (SNR) when using a MIMO DAS with all N spatial streams replicated at N RAUs, compared with a MIMO DAS with only one of the N streams replicated at each RAU for N ≤ 4. It is then experimentally confirmed that a 3 × 3 MIMO DAS offers improved capacity and throughput compared with a 3 × 3 MIMO collocated antenna system (CAS) for the single-user case in two typical indoor DAS scenarios, i.e., one with significant line-of-sight (LOS) propagation and the other with entirely non-line-of-sight (NLOS) propagation. The improvement in capacity is 3.2% and 4.1%, respectively. Then, experimental channel measurements confirm that there is a negligible capacity increase in the 3 × 3 configuration with three spatial streams per antenna unit over the 3 × 3 configuration with a single spatial stream per antenna unit. The former layout is observed to provide an increase of ∼1% in the median channel capacity in both the single-and multiple-user scenarios. With 20 users and three base stations, a MIMO DAS using the latter layout offers median aggregate capacities of 259 and 233 bit/s/Hz for the LOS and NLOS scenarios, respectively. It is concluded that DAS installations can further enhance the capacity offered to multiple users by multiple 3 × 3 MIMO-enabled base stations. Further, designing future DAS systems to support broadband 3 × 3 MIMO systems may not require significant upgrades to existing installations for small numbers of spatial streams. © 2013 IEEE.

Manufacturing excellent engineers: Skill development in a Masters programme

An MPhil programme, delivered by the Engineering Department at the University of Cambridge, claims to be excellent at preparing graduates for manufacturing industry careers. The course uses a combination of different educational experiences, including industry-based assignments, industrial visits and practical exercises. This research explores how problem solving skills are developed during the first module, Induction, which is designed to enable students to undertake their first industrial assignment. From the literature, four conditions necessary for skill development were identified: Provision of a skill description, making explicit key components A number of different experiences with a range of contextual variables A teaching process which includes regular feedback and student reflection Students motivated to learn. These were used to construct a skill development framework (SDF). Using a case study research design, multiple types of evidence were collected to test for the above conditions using both classroom observation and questionnaire methods. The results confirmed the presence of the SDF conditions at different levels, with reflection aspects considered the weakest. Conflicting results were obtained regarding the students' self-awareness of skill levels. A plausible explanation is a change in the students' frame of reference. This initial study set out to develop a better understanding of the process of skill development. Whilst the SDF appears reasonable, there is a need for further work in three broad areas of defining skills, assessing skills and developing reflection skills.

Re-engineering Manufacturing for Sustainability

This edited volume presents the proceedings of the 20th CIRP LCE Conference, which cover various areas in life cycle engineering such as life cycle design, end-of-life management, manufacturing processes, manufacturing systems, methods and ...