Preliminary investigation on growth responses of Cyprinus carpio L. fed on locally formulated artificial diets

The growth rate and feed conversion ratios of the common carp, Cyprinus carpio were measured for five test diets in 14-day replicate laboratory studies. The young carp were fed with artificial test diets with crude protein contents ranging from 14.50 to 21.42 per cent. Within this range of feed characteristic optimum growth rates were obtained with diets containing 20.25 and 21.42 per cent crude protein. The study of the effect of varying ration levels showed that growth rates increased with increases of ration size, but the food conversion efficiency and protein efficiency ratios decreased markedly as ration size was increased

Numerical investigation of crack growth in concrete subjected to compression by the generalized beam lattice model

The beam lattice-type models, such as the Euler-Bernoulli (or Timoshenko) beam lattice and the generalized beam (GB) lattice, have been proved very effective in simulating failure processes in concrete and rock due to its simplicity and easy implementation. However, these existing lattice models only take into account tensile failures, so it may be not applicable to simulation of failure behaviors under compressive states. The main aim in this paper is to incorporate Mohr-Coulomb failure criterion, which is widely used in many kinds of materials, into the GB lattice procedure. The improved GB lattice procedure has the capability of modeling both element failures and contact/separation of cracked elements. The numerical examples show its effectiveness in simulating compressive failures. Furthermore, the influences of lateral confinement, friction angle, stiffness of loading platen, inclusion of aggregates on failure processes are respectively analyzed in detail.

A preliminary investigation into the effects of a sex-reversal androgen, methyltestosterone, on food utilization and growth of Sarotherodon niloticus (L) fry

Three groups of Sarotherodon niloticus fry were fed for 8 weeks on diets either treated with 17- & methyltestosterone (MT), alcohol (CA), or untreated (CO). Growth rate and food utilization in the different groups were compared. Results indicate that the best growth, Feed Conversion Ratio (FCR), Protein Efficiency Ratio (PER) and Mean Growth Rate (MGR) were obtained with the MT diet. There was no significant difference (P 0.05) in growth and food utilization of the CA and CO fry, nor in the mortality rate of the 3 treatments. The androgen, methyltestosterone promotes growth and protein anabolism without producing toxic effects in S. niloticus

An investigation of the organization of canoe fisheries in Nigeria: A case study of Ilaje/Esedo local government area of Ondo State

The effects of some socio-economic variables on the performance of artisanal fishermen were investigated. The variables include the age-structure of the fishermen, level of investment, educational background, membership of co-operative societies and marketing arrangements. All these variables were found to be crucial to productivity in the artisanal fishing sector

Numerical Investigation On The Flowfield Of "Swallowtail" Cavity For Supersonic Mixing Enhancement

A "swallowtail" cavity for the supersonic combustor was proposed to serve as an efficient flame holder for scramjets by enhancing the mass exchange between the cavity and the main flow. A numerical study on the "swallowtail" cavity was conducted by solving the three-dimensional Reynolds-averaged Navier-Stokes equations implemented with a k-epsilon turbulence model in a multi-block mesh. Turbulence model and numerical algorithms were validated first, and then test cases were calculated to investigate into the mechanism of cavity flows. Numerical results demonstrated that the certain mass in the supersonic main flow was sucked into the cavity and moved spirally toward the combustor walls. After that, the flow went out of the cavity at its lateral end, and finally was efficiently mixed with the main flow. The comparison between the "swallowtail" cavity and the conventional one showed that the mass exchanged between the cavity and the main flow was enhanced by the lateral flow that was induced due to the pressure gradient inside the cavity and was driven by the three-dimensional vortex ring generated from the "swallowtail" cavity structure.

Investigation on mechanism of critical cavitating flow in liquid jet pumps under operating limits

The critical cavitating flow in liquid jet pumps under operating limits is investigated in this paper. Measurements on the axial pressure distribution along the wall of jet pumps indicate that two-phase critical flow occurs in the throat pipe under operating limits. The entrained flow rate and the distribution of the wall pressure upstream lowest pressure section does not change when the outlet pressure is lower than a critical value. A liquid-vapor mixing shockwave is also observed under operating limits. The wave front moves back and forth in low frequency around the position of the lowest pressure. With the measured axial wall pressures, the Mach number of the two-phase cavitating flow is calculated. It's found that the maximum Mach number is very close to I under operating limits. Further analysis infers a cross-section where Mach number approaches to I near the wave front. Thus, the liquid-vapor mixture velocity should reach the local sound velocity and resulting in the occurrence of operating limits.

A numerical investigation on the flow physics of koi carp (Cyprinus carpio koi) burst-and-coast swimming

Abstract—Burst-and-coast is the most common locomotion type in freely routine swimming of koi carps (Cyprinus carpio koi), which consists of a burst phase and a coast phase in each cycle and mostly leads to a straight-line trajectory. Combining with the tracking experiment, the flow physics of koi carp’s burst-andcoast swimming is investigated using a novel integrated CFD method solving the body-fluid interaction problem. The dynamical equations of a deforming body are formulated. Following that, the loose-coupled equations of the body dynamics and the fluid dynamics are numerically solved with the integrated method. The two burst modes, MT (Multiple Tail-beat) and HT (Half Tail-beat), which have been reported by the experiments, are investigated by numerical simulations in this paper. The body kinematics is predicted and the flow physics is visualized, which are in good agreement with the corresponding experiments. Furthermore, the optimization on the energy cost and several critical control mechanisms in burst-and-coast swimming of koi carps are explored, by varying the parameters in its selfpropelled swimming. In this paper, energetics is measured by the two mechanical quantities, total output power CP and Froude efficiency Fr. Results and discussion show that from the standpoint of mechanical energy, burst-and-coast swimming does not actually save energy comparing with steady swimming at the same average speed, in that frequently changing of speed leads to decrease of efficiency.

Numerical investigation on a transition prediction model

A new transition prediction model is introduced, which couples the intermittency effect into the turbulence transport equations and takes the characteristics of fluid transition into consideration to mimic the exact process of transition. Test cases include a two-dimensional incompressible plate and a two-dimensional NACA0012 airfoil. Performance of this transition model for incompressible flows is studied, with numerical results consistent to experimental data. The requirement of grid resolution for this transition model is also studied.

Investigation on average void fraction for air/non-Newtonian power-law fluids two-phase flow in downward inclined pipes

The present work has been carried out to investigate on the average void fraction of gas/non-Newtonian fluids flow in downward inclined pipes. The influences of pipe inclination angle on the average void fraction were studied experimentally. A simple correlation, which incorporated the method of Vlachos et al. for gas/Newtonain fluid horizontal flow, the correction factor of Farooqi and Richardson and the pipe inclination angle, was proposed to predict the average void fraction of gas/non-Newtonian power-law stratified flow in downward inclined pipes. The correlation was based on 470 data points covering a wide range of flow rates for different systems at diverse angles. A good agreement was obtained between theory and data and the fitting results could describe the majority of the experimental data within ±20%.

A preliminary investigation into the post harvest losses of fish in Shiroro Lake area

The findings are presented of a study conducted to assess the post harvest losses in Shiroro Lake, Nigeria. The major objectives were to identify and quantify the types of losses, to provide recommendations that would enhance formulation of policy guidelines for utilization and exploitation of the declining fishery resources of the lake

An investigation of the effect of replacing fish meal with soyabean meal, groundnut cake and blood meal at varied proportion on growth and food utilization of the Clarias anguillaris fingerlings fed in outdoor hapas

Fingerlings of Clarias anguillaris obtained from a homogenous source through induce breeding and each with a mean weight of 2.8g were stocked in ten hapas each measuring 1.0x1.0m in outdoor concrete tank and were fed for eight (8) weeks. Results shows that the best growth rate was recorded among fingerlings fed fish meal as the only protein source (TD5) while DT2 containing soya bean, groundnut cake (40%), blood meal as the protein sources came next. The growth rate of fingerlings fed DT2 (40 % groundnut cake, 10% soyabean meal and 10% blood meal) was higher than those fed DT4 containing 10% fish meal but lower than those fed DT5 which has fish meal as its sole source of protein (53.0%). Analysis of various growth parameters like SGR, FCR and PER. shows that DT5 was the overall best diet but there was no significant statistical difference in weight gained by fish fed the five diets (P <0.05)