Lorentz TEM investigation of the switching behavior in artificial spin ice building blocks

Frustration – the inability to simultaneously satisfy all interactions – occurs in a wide range of systems including neural networks, water ice and magnetic systems. An example of the latter is the so called spin-ice in pyrochlore materials [1] which have attracted a lot of interest not least due to the emergence of magnetic monopole defects when the ‘ice rules’ governing the local ordering breaks down [2]. However it is not possible to directly measure the frustrated property – the direction of the magnetic moments – in such spin ice systems with current experimental techniques. This problem can be solved by instead studying artificial spin-ice systems where the molecular magnetic moments are replaced by nanoscale ferromagnetic islands [3-8]. Two different arrangements of the ferromagnetic islands have been shown to exhibit spin ice behaviour: a square lattice maintaining four moments at each vertex [3,8] and the Kagome lattice which has only three moments per vertex but equivalent interactions between them [4-7]. Magnetic monopole defects have been observed in both types of lattices [7-8]. One of the challenges when studying these artificial spin-ice systems is that it is difficult to arrive at the fully demagnetised ground-state [6-8].
Here we present a study of the switching behaviour of building blocks of the Kagome lattice influenced by the termination of the lattice. Ferromagnetic islands of nominal size 1000 nm by 100 nm were fabricated in five island blocks using electron-beam lithography and lift-off techniques of evaporated 18 nm Permalloy (Ni80Fe20) films. Each block consists of a central island with four arms terminated by a different number and placement of ‘injection pads’, see Figure 1. The islands are single domain and magnetised along their long axis. The structures were grown on a 50 nm thick electron transparent silicon nitride membrane to allow TEM observation, which was back-coated with a 5 nm film of Au to prevent charge build-up during the TEM experiments.
To study the switching behaviour the sample was subjected to a magnetic field strong enough to magnetise all the blocks in one direction, see Figure 1. Each block obeys the Kagome lattice ‘ice-rules’ of “2-in, 1-out” or “1-in, 2-out” in this fully magnetised state. Fresnel mode Lorentz TEM images of the sample were then recorded as a magnetic field of increasing magnitude was applied in the opposite direction. While the Fresnel mode is normally used to image magnetic domain structures [9] for these types of samples it is possible to deduce the direction of the magnetisation from the Lorentz contrast [5]. All images were recorded at the same over-focus judged to give good Lorentz contrast.
The magnetisation was found to switch at different magnitudes of the applied field for nominally identical blocks. However, trends could still be identified: all the blocks with any injection pads, regardless of placement and number, switched the direction of the magnetisation of their central island at significantly smaller magnitudes of the applied magnetic field than the blocks without injection pads. It can therefore be concluded that the addition of an injection pad lowers the energy barrier to switching the connected island, acting as a nucleation site for monopole defects. In these five island blocks the defects immediately propagate through to the other side, but in a larger lattice the monopoles could potentially become trapped at a vertex and observed [10].
References

[1] M J Harris et al, Phys Rev Lett 79 (1997) p.2554.
[2] C Castelnovo, R Moessner and S L Sondhi, Nature 451 (2008) p. 42.
[3] R F Wang et al, Nature 439 (2006) 303.
[4] M Tanaka et al, Phys Rev B 73 (2006) 052411.
[5] Y Qi, T Brintlinger and J Cumings, Phys Rev B 77 (2008) 094418.
[6] E Mengotti et al, Phys Rev B 78 (2008) 144402.
[7] S Ladak et al, Nature Phys 6 (2010) 359.
[8] C Phatak et al, Phys Rev B 83 (2011) 174431.
[9] J N Chapman, J Phys D 17 (1984) 623.
[10] The authors gratefully acknowledge funding from the EPSRC under grant number EP/D063329/1.

Assessing Lifetime Homes Standards and Part M Building Regulations for Housing Design in the UK

The aims of this article are to examine Lifetime Home Standards (LTHS) and Part M of the UK Building Regulations and to discuss how relevant and successful they are. The UK government expects all new homes to be built to LTHS by 2013. This is increasingly important with an ageing population. The home environment can enable independence and provide a therapeutic place for everyone. As Part M of the building regulations are compulsory in all housing and LTHS are mandatory for public sector housing, a review of research articles was undertaken on these standards. The paper begins with a brief background on accessibility regulations, followed by a critical review of the standards that takes the body of literature that has been written around them into account. This review suggests that the standards should be improved and that designers and architects face challenges to creatively incorporate them into housing design.

Life-Cycle Energy Analysis of a Modular/Off-Site Building School

This paper is concerned with assessing the building’s the energy efficiency and qualities of a modular design for the education industry, in order assess the long economic benefits. The research includes a life-cycle energy and cost analysis of the school building design, predicting the impact on the operational cost of the building as a result of the addition of photovoltaic panels. The paper also includes a comparative study between the ECO Modular Solutions building, and a current standard prefabricated school building, quantifying the savings in CO2 emissions and savings in cost.

Insurgent Building: Spatial Practices of Resistance in the Bedouin-State Conflict in Southern Israel

In the con?ict between Bedouin representatives and government authorities in the southern Israeli Negev, the term ‘insurgent building’ refers to the construction of buildings erected in the full expectation that they will be demolished by the Israeli police shortly thereafter. This article analyses how insurgent building is employed as a spatial practice by emerging political actors to claim contested Bedouin landownership. Importantly, insurgent building relies on the ability of media and advocacy organizations to mobilize behind the issue. Most of the relevant scholarship takes the interpretative categories advanced by these actors at face value. Following anthropological debates regarding objecti?cation and categorization, I examine the context of a speci?c case of insurgent building. Emerging political actors who employ insurgent building often rely on prede?ned ethnic categories and clear-cut people–state polarities. This case demonstrates the need for a more differentiated understanding of multilayered local dynamics than the one offered by mainstream linear interpretations. At a more abstract level, political actors contribute to the reproduction of the very categories against which they mobilize.

Building partnerships in social work education: Towards achieving collaborative advantage for employers and universities

Summary: Better partnership working between employers and academic institutions has recently been identified as one of the key developments needed to improve social work education and practice in the UK (Social Work Reform Board, 2010). However, the praxis of collaborative working in social work education remains under-researched and it is unclear what factors are significant in promoting effective partnership. This article contributes to this debate by reporting research that examined the experience of social work academics working with employers to deliver qualifying level social work education in Northern Ireland.

Findings: This analysis explores key factors in the dynamics of the collaborative process and identifies both congruence and discord in academic and employer perspectives. The findings highlight the collaborative advantage accruing from partnership working, which include the benefits of a centrally coordinated system for the management and delivery of practice learning. However, the results also indicate that engaging in partnership working is a complex process that can create conflict and tensions, and that it is important to ground collaborations in realistic expectations of what can be achieved.

Application: This article identifies opportunities for achieving collaborative advantage and the challenges. It identifies lessons learned about the value of partnership working in social work education and ways to increase its efficacy.

An Gaelaras, by O'Donnell and Tuomey:The Building blocks of Language: Review by Rick LeVert and Tarla MacGabhann

The opening of An Gaelaras - the Irish language cultural centre in Derry designed by O'Donnell + Tuomey - is the most significant architectural addition to the symbolic landscape of the Walled City in recent times. It marks nothing less than a physical re-surfacing and a normalisation of the Irish language in this long fragmented city. This alone places An Gaelaras in a delicate historical arc that spans over 1500 years of architectural heritage and links it with the now invisible ruins of St Columba's original 6th century monastery.

Compromising Spatial Quality: Modernity in the Era of National State Building in Cairo

The paper examines the imposition of western ideals of urbanism within colonial Cairo between1882-1952. It looks at the ideologies of capitalism, state control, and utopian idealism, which were vital tools to create modern built environments in the city. The argument is that principles of Western urbanism were at work and deeply influenced the institutional and professional practices of the Egyptian planners, who were mostly educated in Europe; however the outcomes revealed a major shift towards more inflexible solutions described as more open to compromise with the existing conditions. The paper analyses the case of a re-planning scheme drafted in the 1920s by the first Egyptian director of the Ministry of Town Planning under the British occupation. The scheme represented the superimposition of a western-style neighbourhood model on a historically rooted traditional quarter in Cairo. The paper largely relies on original archival materials, maps, documents and accounts to support the historical narrative of urban planning in Cairo. It reports that westernization approaches for planning Cairo were introduced to offer a new imagery representation, which remained central to the development of planning practices in postcolonial Egypt through different practical applications.

Early Implementation of Building Information Modeling into a Cold-Formed Steel Company: Providing Novel Project Management Techniques and Solutions to Industry

The ability of building information modeling (BIM) to positively impact projects in the AEC through greater collaboration and integration is widely acknowledged. This paper aims to examine the development of BIM and how it can contribute to the cold-formed steel (CFS) building industry. This is achieved through the adoption of a qualitative methodology encompassing a literature review, exploratory interviews with industry experts, culminating in the development of e-learning material for the sector. In doing so, the research team have collaborated with one of the United Kingdom’s largest cold-formed steel designer/fabricators. By demonstrating the capabilities of BIM software and providing technical and informative videos in its creation, this project has found two key outcomes. Firstly, to provide invaluable assistance in the transition from traditional processes to a fully collaborative 3D BIM as required by the UK Government under the “Government Construction Strategy” by 2016 in all public sector projects. Secondly, to demonstrate BIM’s potential not only within CFS companies, but also within the AEC sector as a whole. As the flexibility, adaptability and interoperability of BIM software is alluded to, the results indicate that the introduction and development of BIM and the underlying ethos suggests that it is a key tool in the development of the industry as a whole.

Local materials for building houses: laterite valorization in Africa

This paper presents the preliminary results of geological and geomechanical studies on the laterite stone exploited at Dano quarry in Burkina Faso. The field work described the geological structure of quarry sites and their environment to determine the rocks alteration and the links between the bedrock and lateritic material. Physic-mechanical properties have been studied for assessing the potentiality of this material for lightweight housing, to be completed with thermal and environmental considerations. Some social and economic evaluations are in progress in order to foster its utilization under local conditions.