Short-term effects of human urine fertiliser and wood ash on soil pH and electrical conductivity

The fertiliser value of human urine has been examined on several crops, yet little is known about its effects on key soil properties of agronomic significance. This study investigated temporal soil salinization potential of human urine fertiliser (HUF). It further looked at combined effects of human urine and wood ash (WA) on soil pH, urine-NH_3 volatilisation, soil electrical conductivity (EC), and basic cation contents of two Acrisols (Adenta and Toje series) from the coastal savannah zone of Ghana. The experiment was a factorial design conducted in the laboratory for 12 weeks. The results indicated an increase in soil pH by 1.2 units for Adenta series and 1 unit for Toje series after one week of HUF application followed by a decline by about 2 pH units for both soil types after twelve weeks. This was attributed to nitrification of ammonium to nitrate leading to acidification. The EC otherwise increased with HUF application creating slightly saline conditions in Toje series and non-saline conditions in Adenta series. When WA was applied with HUF, both soil pH and EC increased. In contrast, the HUF alone slightly salinized Toje series, but both soils remained non-saline whenWA and HUF were applied together. The application ofWA resulted in two-fold increase in Ca, Mg, K, and Na content compared to HUF alone. Hence, WA is a promising amendment of acid soils and could reduce the effect of soluble salts in human urine fertilizer, which is likely to cause soil salinity.

Impact on Policy Responses to Food Price Crisis and Rural Food Security in Sri Lanka

In Sri Lanka policy responses have direct impacts on rural dwellers. Over 80% of Sri Lanka’s population live in rural areas and 90% of them represent low income dwellers. Their production system may be hampered by fragmented landholding, poor economics of scale, low investment levels resulting from poor financial services as well as inappropriate or limited technology. They are vulnerable to price hikes of basic foods and food security issues due to fragmented landholding and poor financial services. Policy measures to reduce the transmission of higher international prices in domestic markets exist to protect the food security of the vulnerable population. This paper will discuss the food policy and strategies implemented by the government and outside to the above facts this paper also describes the effectiveness of the policies forwarded by the government. The objective of this study is to analyse the impact of policy responses to the food price crisis and rural food security in Sri Lanka. Outside of the above facts this study also treats the impact of policies and decisions on the nutritional condition of rural dwellers. Furthermore this study is to analyse the fluctuation of buying power with the price hikes and the relation of above facts with issues like malnutrition. This paper discusses why policy makers should pay greater attention to rural dwellers and describes the multiple pathways through which food price increases have on rural people. It also provides evidence of the impact of this crisis in particular, through hidden hunger, and discusses how current policy responses should adjust and improve to protect the rural dwellers in the short and long term.

Efficient Characterisation and Optimal Control of Open Quantum Systems - Mathematical Foundations and Physical Applications

Since no physical system can ever be completely isolated from its environment, the study of open quantum systems is pivotal to reliably and accurately control complex quantum systems. In practice, reliability of the control field needs to be confirmed via certification of the target evolution while accuracy requires the derivation of high-fidelity control schemes in the presence of decoherence. In the first part of this thesis an algebraic framework is presented that allows to determine the minimal requirements on the unique characterisation of arbitrary unitary gates in open quantum systems, independent on the particular physical implementation of the employed quantum device. To this end, a set of theorems is devised that can be used to assess whether a given set of input states on a quantum channel is sufficient to judge whether a desired unitary gate is realised. This allows to determine the minimal input for such a task, which proves to be, quite remarkably, independent of system size. These results allow to elucidate the fundamental limits regarding certification and tomography of open quantum systems. The combination of these insights with state-of-the-art Monte Carlo process certification techniques permits a significant improvement of the scaling when certifying arbitrary unitary gates. This improvement is not only restricted to quantum information devices where the basic information carrier is the qubit but it also extends to systems where the fundamental informational entities can be of arbitary dimensionality, the so-called qudits. The second part of this thesis concerns the impact of these findings from the point of view of Optimal Control Theory (OCT). OCT for quantum systems utilises concepts from engineering such as feedback and optimisation to engineer constructive and destructive interferences in order to steer a physical process in a desired direction. It turns out that the aforementioned mathematical findings allow to deduce novel optimisation functionals that significantly reduce not only the required memory for numerical control algorithms but also the total CPU time required to obtain a certain fidelity for the optimised process. The thesis concludes by discussing two problems of fundamental interest in quantum information processing from the point of view of optimal control - the preparation of pure states and the implementation of unitary gates in open quantum systems. For both cases specific physical examples are considered: for the former the vibrational cooling of molecules via optical pumping and for the latter a superconducting phase qudit implementation. In particular, it is illustrated how features of the environment can be exploited to reach the desired targets.

ADAM: A Decentralized Parallel Computer Architecture Featuring Fast Thread and Data Migration and a Uniform Hardware Abstraction

The furious pace of Moore's Law is driving computer architecture into a realm where the the speed of light is the dominant factor in system latencies. The number of clock cycles to span a chip are increasing, while the number of bits that can be accessed within a clock cycle is decreasing. Hence, it is becoming more difficult to hide latency. One alternative solution is to reduce latency by migrating threads and data, but the overhead of existing implementations has previously made migration an unserviceable solution so far. I present an architecture, implementation, and mechanisms that reduces the overhead of migration to the point where migration is a viable supplement to other latency hiding mechanisms, such as multithreading. The architecture is abstract, and presents programmers with a simple, uniform fine-grained multithreaded parallel programming model with implicit memory management. In other words, the spatial nature and implementation details (such as the number of processors) of a parallel machine are entirely hidden from the programmer. Compiler writers are encouraged to devise programming languages for the machine that guide a programmer to express their ideas in terms of objects, since objects exhibit an inherent physical locality of data and code. The machine implementation can then leverage this locality to automatically distribute data and threads across the physical machine by using a set of high performance migration mechanisms. An implementation of this architecture could migrate a null thread in 66 cycles -- over a factor of 1000 improvement over previous work. Performance also scales well; the time required to move a typical thread is only 4 to 5 times that of a null thread. Data migration performance is similar, and scales linearly with data block size. Since the performance of the migration mechanism is on par with that of an L2 cache, the implementation simulated in my work has no data caches and relies instead on multithreading and the migration mechanism to hide and reduce access latencies.

Self-Assembly of Stimuli-Responsive Water-Soluble [60]Fullerene End-Capped Ampholytic Block Copolymer

Well-defined, water-soluble, pH and temperature stimuli-responsive [60]fullerene (C₆₀) containing ampholytic block copolymer of poly((methacrylic acid)-block-(2-(dimethylamino)ethyl methacrylate))-block–C₆₀ (P(MAA-b-DMAEMA)-b-C₆₀) was synthesized by the atom transfer radical polymerization (ATRP) technique. The self-assembly behaviour of the C₆₀ containing polyampholyte in aqueous solution was characterized by dynamic light scattering (DLS), and transmission electron microscopy. This amphiphilic mono-C₆₀ end-capped block copolymer shows enhanced solubility in aqueous medium at room and elevated temperatures and at low and high pH but phase-separates at intermediate pH of between 5.4 and 8.8. The self assembly of the copolymer is different from that of P(MAA-b-DMAEMA). Examination of the association behavior using DLS revealed the co-existence of unimers and aggregates at low pH at all temperatures studied, with the association being driven by the balance of hydrophobic and electrostatic interactions. Unimers and aggregates of different microstructures are also observed at high pH and at temperatures below the lower critical solution temperature (LCST) of PDMAEMA. At high pH and at temperatures above the LCST of PDMAEMA, the formation of micelles and aggregates co-existing in solution is driven by the combination of hydrophobic, electrostatic, and charge-transfer interactions.

Applying the Lessons of “Lean Now” to Transform the US Aerospace Enterprise

Lean is common sense and good business sense. As organizations grow and become more successful, they begin to lose insight into the basic truths of what made them successful. Organizations have to deal with more and more issues that may not have anything to do with directly providing products or services to their customers. Lean is a holistic management approach that brings the focus of the organization back to providing value to the customer. In August 2002, Mrs. Darleen Druyun, the Principal Deputy to the Assistant Secretary of the Air Force for Acquisition and government co-chairperson of the Lean Aerospace Initiative (LAI), decided it was time for Air Force acquisitions to embrace the concepts of lean. At her request, the LAI Executive Board developed a concept and methodology to employ lean into the Air Force’s acquisition culture and processes. This was the birth of the “Lean Now” initiative. An enterprise-wide approach was used, involving Air Force System Program Offices (SPOs), aerospace industry, and several Department of Defense agencies. The aim of Lean Now was to focus on the process interfaces between these “enterprise” stakeholders to eliminate barriers that impede progress. Any best practices developed would be institutionalized throughout the Air Force and the Department of Defense (DoD). The industry members of LAI agreed to help accelerate the government-industry transformation by donating lean Subject Matter Experts (SMEs) to mentor, train, and facilitate the lean events of each enterprise. Currently, the industry SMEs and the Massachusetts Institute of Technology are working together to help the Air Force develop its own lean infrastructure of training courses and Air Force lean SMEs. The first Lean Now programs were the F/A-22, Global Hawk, and F-16. Each program focused on specific acquisition processes. The F/A-22 focused on the Test and Evaluation process; the Global Hawk focused on Evolutionary Acquisitions; and the F-16 focused on improving the Contract Closeout process. Through lean, each enterprise made many significant improvements. The F/A-22 was able to reduce its Operational Flight Plan (OFP) Preparation and Load process time of 2 to 3 months down to 7 hours. The Global Hawk developed a new production plan that increases the annual production of its Integrated Sensor Suite from 3 per year to 6 per year. The F-16 enterprise generated and is working 12 initiatives that could result in a contract closeout cycle time reduction of 3 to 7 years. Each enterprise continues to generate more lean initiatives that focus on other areas and processes within their respective enterprises.

CoDaPack. An Excel and Visual Basic based software of compositional data analysis. Current version and discussion form upcoming versions

In the eighties, John Aitchison (1986) developed a new methodological approach for the statistical analysis of compositional data. This new methodology was implemented in Basic routines grouped under the name CODA and later NEWCODA inMatlab (Aitchison, 1997). After that, several other authors have published extensions to this methodology: Marín-Fernández and others (2000), Barceló-Vidal and others (2001), Pawlowsky-Glahn and Egozcue (2001, 2002) and Egozcue and others (2003). (...)

Gu??a Did??ctica Reduce, Recicla, Recrea : emprendimiento Social-Productivo

Resumen basado en el de la publicaci??n

A system to reduce the effect of CCDs saturation

Colour image segmentation based on the hue component presents some problems due to the physical process of image formation. One of that problems is colour clipping, which appear when at least one of the sensor components is saturated. We have designed a system, that works for a trained set of colours, to recover the chromatic information of those pixels on which colour has been clipped. The chromatic correction method is based on the fact that hue and saturation are invariant to the uniform scaling of the three RGB components. The proposed method has been validated by means of a specific colour image processing board that has allowed its execution in real time. We show experimental results of the application of our method

Emotional stimuli reduce the attentional blink in sub-clinical anxious subjects. 'Los est??mulos emocionales reducen el parpadeo atencional (attentional blink) en sujetos con ansiedad subcl??nica'

Resumen tomado de la publicaci??n

Mejoramiento Productivo "Apparel Basic Ltda"

Para el presente trabajo realizado en la Universidad del Rosario, buscamos hacer un mejoramiento productivo de la empresa Apparel Basic Ltda. Teniendo en cuenta todas las herramientas aprehendidas durante la academia y aplicando esto a una empresa del sector real de confecciones. Se centrara el análisis principalmente en las tres áreas donde se observan los mayores problemas organizacionales: Producción, manejo de inventarios y entrega de producto. En el primer análisis se realizara todo el estudio del proceso de producción, teniendo en cuenta la distribución en planta, las rutas críticas de proceso, los diagramas de flujo de producto, el análisis de las principales referencias, entre otros. Todo esto con el fin de identificar los principales errores y poder proponer herramientas y procesos de mejora que sean de ayuda para esta organización. El siguiente análisis se desarrollara en el manejo de inventarios; dentro de este aspecto se analizaran la distribución de las bodegas de producto, la identificación de los productos de mayor rotación, el planteamiento de indicadores de gestión, entre otros procesos, con el fin de identificar procesos benéficos para la empresa que aceleren y mejoren el flujo de producto al interior de la organización. Luego de esto, se analiza todo el proceso de alistamiento y entrega de producto ya que es uno de los principales problemas dentro de la organización porque se esta incumpliendo con los pedidos de los clientes lo que genera un problema de insatisfacción por parte de los clientes.

PowerPoint - basic skills training

This step-by-step guided worksheet and accompanying PowerPoint file introduce some key skills: - reorganising slides and bullets - creating speaker notes - printing slide handouts - including hyperlinks - adding images Simple stuff, but many find it useful - it uses Office 2004 (XP)

Basic laser printing WSA (Mac)

Video on how to print to a Ricoh laser printer at WSA from a Mac, applies University wide just don't print WSA Colour or WSA Black & White if you are not WSA based.

How to setup a basic Photoshop with Print in view (300dpi)

Video on how to setup a Basic Photoshop document with the view to outputting a Printable PDF.

Introduction to IT and basic facilites at WSA (Winchester School of Art)

Week 0 induction for all new WSA students. Includes Details on iSolutions, WSA Technical Services, Workshop and Studio Professional practice and some basic Health and Safety guidance.